[Intel-gfx] [PATCH v6 04/11] drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3.
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Sep 17 12:20:46 UTC 2020
On Tue, Sep 15, 2020 at 04:03:45PM -0700, Navare, Manasi wrote:
> On Mon, Sep 14, 2020 at 10:47:56PM +0300, Ville Syrjälä wrote:
> > On Mon, Sep 14, 2020 at 12:38:57PM -0700, Navare, Manasi wrote:
> > > On Mon, Sep 14, 2020 at 10:17:57PM +0300, Ville Syrjälä wrote:
> > > > On Mon, Sep 14, 2020 at 12:00:33PM -0700, Navare, Manasi wrote:
> > > > > On Mon, Sep 07, 2020 at 02:20:56PM +0300, Ville Syrjälä wrote:
> > > > > > On Wed, Jul 15, 2020 at 03:42:15PM -0700, Manasi Navare wrote:
> > > > > > > From: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > > > > > >
> > > > > > > Small changes to intel_dp_mode_valid(), allow listing modes that
> > > > > > > can only be supported in the bigjoiner configuration, which is
> > > > > > > not supported yet.
> > > > > > >
> > > > > > > eDP does not support bigjoiner, so do not expose bigjoiner only
> > > > > > > modes on the eDP port.
> > > > > > >
> > > > > > > v5:
> > > > > > > * Increase max plane width to support 8K with bigjoiner (Maarten)
> > > > > > > v4:
> > > > > > > * Rebase (Manasi)
> > > > > > >
> > > > > > > Changes since v1:
> > > > > > > - Disallow bigjoiner on eDP.
> > > > > > > Changes since v2:
> > > > > > > - Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
> > > > > > > and split off the downstream and source checking to its own function.
> > > > > > > (Ville)
> > > > > > > v3:
> > > > > > > * Rebase (Manasi)
> > > > > > >
> > > > > > > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > > > > > > Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > > > > > > ---
> > > > > > > drivers/gpu/drm/i915/display/intel_display.c | 2 +-
> > > > > > > drivers/gpu/drm/i915/display/intel_dp.c | 119 ++++++++++++++-----
> > > > > > > 2 files changed, 91 insertions(+), 30 deletions(-)
> > > > > > >
> > > > > > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > index 78cbfefbfa62..3ecb642805a6 100644
> > > > > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > @@ -17400,7 +17400,7 @@ intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> > > > > > > * too big for that.
> > > > > > > */
> > > > > > > if (INTEL_GEN(dev_priv) >= 11) {
> > > > > > > - plane_width_max = 5120;
> > > > > > > + plane_width_max = 7680;
> > > > > >
> > > > > > This looks misplaced. Planes do no know whether bigjoiner can be used or
> > > > > > not. They should not care in fact. The caller should have that knowledge
> > > > > > and can deal with it properly.
> > > > >
> > > > > Hmm, so the caller of intel_mode_valid_max_plane_size() should check on the bigjoiner
> > > > > flag and perhaps if bigjoiner is true then increase the plane_width_max to 7680?
> > > > >
> > > > > Am still not sure where this should happen? We need to have the plane max width to be 7680
> > > > > before we prune the 8K mode in intel_mode_valid
> > > > >
> > > > > Where should this be added according to you?
> > > >
> > > > Hmm. I guess we do need to put it into this function given the way this
> > > > is structured. However we still can't assume bigjoiner can be used since
> > > > it can't be used on DDI A on icl. So we should probably just pass in a
> > > > bool here to indicate whether bigjoiner can be used or not.
> > > >
> > >
> > > So in intel_dp_mode_valid() we set bigjoiner = true if not edp and higher clock.
> > > I think here we need to do the platform check also, 1. because now we are enabling this for TGL+
> > > where big joiner on all pipes. But we should still I think add GEN >=12 check before setting bigjoiner
> > > to true in intel_dp_mode_valid() and then pass that to intel_mode_valid_max_plane_size(..., book bigjoiner)
> >
> > can_bigjoiner() {
> > return gen >= 12 || (gen==11 && port!=A);
> > }
>
> Hmm, gen check can be done but can the port check be done in intel_dp_mode_valid() since we dont have
> an encoder yet?
The encoder is there already.
> Else we set the bigjoiner to true here based on gen check but add the port check later in compute_config at
> what point if not supported then encoder config will fail.
>
> or can this be sufficient check:
>
> can_bigjoiner() {
> return gen >= 12 || (gen == 11 && !intel_dp_is_edp())
> }
>
> Manasi
>
> >
> > or something.
> >
> > >
> > > Sounds good?
> > >
> > > > Personally I'd just write the thing as something like:
> > > > intel_mode_valid_max_plane_size(..., bool bigjoiner)
> > > > {
> > > > ...
> > > > plane_width_max = 5120 << bigjoiner;
> > > > ...
> > > > }
> > > >
> > > > >
> > > > > Manasi
> > > > > >
> > > > > > > plane_height_max = 4320;
> > > > > > > } else {
> > > > > > > plane_width_max = 5120;
> > > > > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > > > > > > index d6295eb20b63..fbfea99fd804 100644
> > > > > > > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > > > > > > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > > > > > > @@ -248,25 +248,37 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
> > > > > > > return max_link_clock * max_lanes;
> > > > > > > }
> > > > > > >
> > > > > > > -static int
> > > > > > > -intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp)
> > > > > > > +static int source_max_dotclock(struct intel_dp *intel_dp, bool allow_bigjoiner)
> > > > > > > {
> > > > > > > - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> > > > > > > - struct intel_encoder *encoder = &dig_port->base;
> > > > > > > + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > > > > > > + struct intel_encoder *encoder = &intel_dig_port->base;
> > > > > > > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > > > > > > - int max_dotclk = dev_priv->max_dotclk_freq;
> > > > > > > - int ds_max_dotclk;
> > > > > > >
> > > > > > > + if (allow_bigjoiner && INTEL_GEN(dev_priv) >= 11 && !intel_dp_is_edp(intel_dp))
> > > > > > > + return 2 * dev_priv->max_dotclk_freq;
> > > > > > > +
> > > > > > > + return dev_priv->max_dotclk_freq;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static int downstream_max_dotclock(struct intel_dp *intel_dp)
> > > > > > > +{
> > > > > > > int type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
> > > > > > >
> > > > > > > if (type != DP_DS_PORT_TYPE_VGA)
> > > > > > > - return max_dotclk;
> > > > > > > + return 0;
> > > > > > >
> > > > > > > - ds_max_dotclk = drm_dp_downstream_max_clock(intel_dp->dpcd,
> > > > > > > - intel_dp->downstream_ports);
> > > > > > > + return drm_dp_downstream_max_clock(intel_dp->dpcd,
> > > > > > > + intel_dp->downstream_ports);
> > > > > > > +}
> > > > > > > +
> > > > > > > +static int
> > > > > > > +intel_dp_max_dotclock(struct intel_dp *intel_dp, bool allow_bigjoiner)
> > > > > > > +{
> > > > > > > + int max_dotclk = source_max_dotclock(intel_dp, allow_bigjoiner);
> > > > > > > + int ds_max_dotclk = downstream_max_dotclock(intel_dp);
> > > > > > >
> > > > > > > if (ds_max_dotclk != 0)
> > > > > > > - max_dotclk = min(max_dotclk, ds_max_dotclk);
> > > > > > > + return min(max_dotclk, ds_max_dotclk);
> > > > > > >
> > > > > > > return max_dotclk;
> > > > > > > }
> > > > > > > @@ -527,7 +539,8 @@ small_joiner_ram_size_bits(struct drm_i915_private *i915)
> > > > > > >
> > > > > > > static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> > > > > > > u32 link_clock, u32 lane_count,
> > > > > > > - u32 mode_clock, u32 mode_hdisplay)
> > > > > > > + u32 mode_clock, u32 mode_hdisplay,
> > > > > > > + bool bigjoiner)
> > > > > > > {
> > > > > > > u32 bits_per_pixel, max_bpp_small_joiner_ram;
> > > > > > > int i;
> > > > > > > @@ -545,6 +558,10 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> > > > > > > /* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
> > > > > > > max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) /
> > > > > > > mode_hdisplay;
> > > > > > > +
> > > > > > > + if (bigjoiner)
> > > > > > > + max_bpp_small_joiner_ram *= 2;
> > > > > > > +
> > > > > > > drm_dbg_kms(&i915->drm, "Max small joiner bpp: %u\n",
> > > > > > > max_bpp_small_joiner_ram);
> > > > > > >
> > > > > > > @@ -554,6 +571,15 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> > > > > > > */
> > > > > > > bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram);
> > > > > > >
> > > > > > > + if (bigjoiner) {
> > > > > > > + u32 max_bpp_bigjoiner =
> > > > > > > + i915->max_cdclk_freq * 48 /
> > > > > > > + intel_dp_mode_to_fec_clock(mode_clock);
> > > > > > > +
> > > > > > > + DRM_DEBUG_KMS("Max big joiner bpp: %u\n", max_bpp_bigjoiner);
> > > > > > > + bits_per_pixel = min(bits_per_pixel, max_bpp_bigjoiner);
> > > > > > > + }
> > > > > > > +
> > > > > > > /* Error out if the max bpp is less than smallest allowed valid bpp */
> > > > > > > if (bits_per_pixel < valid_dsc_bpp[0]) {
> > > > > > > drm_dbg_kms(&i915->drm, "Unsupported BPP %u, min %u\n",
> > > > > > > @@ -576,7 +602,8 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> > > > > > > }
> > > > > > >
> > > > > > > static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> > > > > > > - int mode_clock, int mode_hdisplay)
> > > > > > > + int mode_clock, int mode_hdisplay,
> > > > > > > + bool bigjoiner)
> > > > > > > {
> > > > > > > struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > > > > > > u8 min_slice_count, i;
> > > > > > > @@ -603,12 +630,20 @@ static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> > > > > > >
> > > > > > > /* Find the closest match to the valid slice count values */
> > > > > > > for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
> > > > > > > - if (valid_dsc_slicecount[i] >
> > > > > > > - drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
> > > > > > > - false))
> > > > > > > + u8 test_slice_count = bigjoiner ?
> > > > > > > + 2 * valid_dsc_slicecount[i] :
> > > > > > > + valid_dsc_slicecount[i];
> > > > > > > +
> > > > > > > + if (test_slice_count >
> > > > > > > + drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, false))
> > > > > > > break;
> > > > > > > - if (min_slice_count <= valid_dsc_slicecount[i])
> > > > > > > - return valid_dsc_slicecount[i];
> > > > > > > +
> > > > > > > + /* big joiner needs small joiner to be enabled */
> > > > > > > + if (bigjoiner && test_slice_count < 4)
> > > > > > > + continue;
> > > > > > > +
> > > > > > > + if (min_slice_count <= test_slice_count)
> > > > > > > + return test_slice_count;
> > > > > > > }
> > > > > > >
> > > > > > > drm_dbg_kms(&i915->drm, "Unsupported Slice Count %d\n",
> > > > > > > @@ -648,11 +683,15 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > > > > > > int max_dotclk;
> > > > > > > u16 dsc_max_output_bpp = 0;
> > > > > > > u8 dsc_slice_count = 0;
> > > > > > > + bool dsc = false, bigjoiner = false;
> > > > > > >
> > > > > > > if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
> > > > > > > return MODE_NO_DBLESCAN;
> > > > > > >
> > > > > > > - max_dotclk = intel_dp_downstream_max_dotclock(intel_dp);
> > > > > > > + if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> > > > > > > + return MODE_H_ILLEGAL;
> > > > > > > +
> > > > > > > + max_dotclk = intel_dp_max_dotclock(intel_dp, false);
> > > > > > >
> > > > > > > if (intel_dp_is_edp(intel_dp) && fixed_mode) {
> > > > > > > if (mode->hdisplay > fixed_mode->hdisplay)
> > > > > > > @@ -664,6 +703,21 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > > > > > > target_clock = fixed_mode->clock;
> > > > > > > }
> > > > > > >
> > > > > > > + if (mode->clock < 10000)
> > > > > > > + return MODE_CLOCK_LOW;
> > > > > > > +
> > > > > > > + if (target_clock > max_dotclk) {
> > > > > > > + if (intel_dp_is_edp(intel_dp))
> > > > > > > + return MODE_CLOCK_HIGH;
> > > > > > > +
> > > > > > > + max_dotclk = intel_dp_max_dotclock(intel_dp, true);
> > > > > > > +
> > > > > > > + if (target_clock > max_dotclk)
> > > > > > > + return MODE_CLOCK_HIGH;
> > > > > > > +
> > > > > > > + bigjoiner = true;
> > > > > > > + }
> > > > > > > +
> > > > > > > max_link_clock = intel_dp_max_link_rate(intel_dp);
> > > > > > > max_lanes = intel_dp_max_lane_count(intel_dp);
> > > > > > >
> > > > > > > @@ -691,23 +745,28 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > > > > > > max_link_clock,
> > > > > > > max_lanes,
> > > > > > > target_clock,
> > > > > > > - mode->hdisplay) >> 4;
> > > > > > > + mode->hdisplay,
> > > > > > > + bigjoiner) >> 4;
> > > > > > > dsc_slice_count =
> > > > > > > intel_dp_dsc_get_slice_count(intel_dp,
> > > > > > > target_clock,
> > > > > > > - mode->hdisplay);
> > > > > > > + mode->hdisplay,
> > > > > > > + bigjoiner);
> > > > > > > }
> > > > > > > +
> > > > > > > + dsc = dsc_max_output_bpp && dsc_slice_count;
> > > > > > > }
> > > > > > >
> > > > > > > - if ((mode_rate > max_rate && !(dsc_max_output_bpp && dsc_slice_count)) ||
> > > > > > > - target_clock > max_dotclk)
> > > > > > > + /* big joiner configuration needs DSC */
> > > > > > > + if (bigjoiner && !dsc) {
> > > > > > > + DRM_DEBUG_KMS("Link clock needs bigjoiner, but DSC or FEC not available\n");
> > > > > > > return MODE_CLOCK_HIGH;
> > > > > > > + }
> > > > > > >
> > > > > > > - if (mode->clock < 10000)
> > > > > > > - return MODE_CLOCK_LOW;
> > > > > > > -
> > > > > > > - if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> > > > > > > - return MODE_H_ILLEGAL;
> > > > > > > + if (mode_rate > max_rate && !dsc) {
> > > > > > > + DRM_DEBUG_KMS("Cannot drive without DSC\n");
> > > > > > > + return MODE_CLOCK_HIGH;
> > > > > > > + }
> > > > > > >
> > > > > > > return intel_mode_valid_max_plane_size(dev_priv, mode);
> > > > > > > }
> > > > > > > @@ -2204,11 +2263,13 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> > > > > > > pipe_config->port_clock,
> > > > > > > pipe_config->lane_count,
> > > > > > > adjusted_mode->crtc_clock,
> > > > > > > - adjusted_mode->crtc_hdisplay);
> > > > > > > + adjusted_mode->crtc_hdisplay,
> > > > > > > + false);
> > > > > > > dsc_dp_slice_count =
> > > > > > > intel_dp_dsc_get_slice_count(intel_dp,
> > > > > > > adjusted_mode->crtc_clock,
> > > > > > > - adjusted_mode->crtc_hdisplay);
> > > > > > > + adjusted_mode->crtc_hdisplay,
> > > > > > > + false);
> > > > > > > if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
> > > > > > > drm_dbg_kms(&dev_priv->drm,
> > > > > > > "Compressed BPP/Slice Count not supported\n");
> > > > > > > --
> > > > > > > 2.19.1
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Intel-gfx mailing list
> > > > > > > Intel-gfx at lists.freedesktop.org
> > > > > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > > > > >
> > > > > > --
> > > > > > Ville Syrjälä
> > > > > > Intel
> > > >
> > > > --
> > > > Ville Syrjälä
> > > > Intel
> >
> > --
> > Ville Syrjälä
> > Intel
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list