[Intel-gfx] [PATCH v10 3/8] drm/i915: Add checks specific to async flips
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Sep 18 11:51:32 UTC 2020
On Fri, Sep 18, 2020 at 02:32:34PM +0530, Karthik B S wrote:
> If flip is requested on any other plane, reject it.
>
> Make sure there is no change in fbc, offset and framebuffer modifiers
> when async flip is requested.
>
> If any of these are modified, reject async flip.
>
> v2: -Replace DRM_ERROR (Paulo)
> -Add check for changes in OFFSET, FBC, RC(Paulo)
>
> v3: -Removed TODO as benchmarking tests have been run now.
>
> v4: -Added more state checks for async flip (Ville)
> -Moved intel_atomic_check_async to the end of intel_atomic_check
> as the plane checks needs to pass before this. (Ville)
> -Removed crtc_state->enable_fbc check. (Ville)
> -Set the I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP flag for async
> flip case as scanline counter is not reliable here.
>
> v5: -Fix typo and other check patch errors seen in CI
> in 'intel_atomic_check_async' function.
>
> v6: -Don't call intel_atomic_check_async multiple times. (Ville)
> -Remove the check for n_planes in intel_atomic_check_async
> -Added documentation for async flips. (Paulo)
>
> v7: -Replace 'intel_plane' with 'plane'. (Ville)
> -Replace all uapi.foo as hw.foo. (Ville)
> -Do not use intel_wm_need_update function. (Ville)
> -Add destination coordinate check. (Ville)
> -Do not allow async flip with linear buffer
> on older hw as it has issues with this. (Ville)
> -Remove break after intel_atomic_check_async. (Ville)
>
> v8: -Rebased.
>
> v9: -Replace DRM_DEBUG_KMS with drm_dbg_kms(). (Ville)
> -Fix comment formatting. (Ville)
> -Remove gen specific checks. (Ville)
> -Remove irrelevant FB size check. (Ville)
> -Add missing stride check. (Ville)
> -Use drm_rect_equals() instead of individual checks. (Ville)
> -Call intel_atomic_check_async before state dump. (Ville)
>
> v10: -Fix the checkpatch errors seen on CI.
>
> Signed-off-by: Karthik B S <karthik.b.s at intel.com>
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 137 +++++++++++++++++++
> 1 file changed, 137 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 30e8908ee263..7327ed4a04f8 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14877,6 +14877,137 @@ static bool intel_cpu_transcoders_need_modeset(struct intel_atomic_state *state,
> return false;
> }
>
> +/**
> + * DOC: asynchronous flip implementation
> + *
> + * Asynchronous page flip is the implementation for the DRM_MODE_PAGE_FLIP_ASYNC
> + * flag. Currently async flip is only supported via the drmModePageFlip IOCTL.
> + * Correspondingly, support is currently added for primary plane only.
> + *
> + * Async flip can only change the plane surface address, so anything else
> + * changing is rejected from the intel_atomic_check_async() function.
> + * Once this check is cleared, flip done interrupt is enabled using
> + * the skl_enable_flip_done() function.
> + *
> + * As soon as the surface address register is written, flip done interrupt is
> + * generated and the requested events are sent to the usersapce in the interrupt
> + * handler itself. The timestamp and sequence sent during the flip done event
> + * correspond to the last vblank and have no relation to the actual time when
> + * the flip done event was sent.
> + */
> +
> +static int intel_atomic_check_async(struct intel_atomic_state *state)
> +{
> + struct drm_i915_private *i915 = to_i915(state->base.dev);
> + struct intel_crtc_state *old_crtc_state, *new_crtc_state;
> + struct intel_plane_state *new_plane_state, *old_plane_state;a
All plane/crtc states can be const I believe.
> + struct intel_crtc *crtc;
> + struct intel_plane *plane;
> + int i;
> +
> + for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> + new_crtc_state, i) {
> + if (needs_modeset(new_crtc_state)) {
> + drm_dbg_kms(&i915->drm, "Modeset Required. Async flip not supported\n");
> + return -EINVAL;
> + }
> +
> + if (!new_crtc_state->hw.active) {
> + drm_dbg_kms(&i915->drm, "CRTC inactive\n");
> + return -EINVAL;
> + }
> + if (old_crtc_state->active_planes != new_crtc_state->active_planes) {
> + drm_dbg_kms(&i915->drm,
> + "Active planes cannot be changed during async flip\n");
> + return -EINVAL;
> + }
> + }
> +
> + for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state,
> + new_plane_state, i) {
> + /*
> + * TODO: Async flip is only supported through the page flip IOCTL
> + * as of now. So support currently added for primary plane only.
> + * Support for other planes on platforms on which supports
> + * this(vlv/chv and icl+) should be added when async flip is
> + * enabled in the atomic IOCTL path.
> + */
> + if (plane->id != PLANE_PRIMARY)
> + return -EINVAL;
> +
> + /*
> + * FIXME: This check is kept generic for all platforms.
> + * Need to verify this for all gen9 and gen10 platforms to enable
> + * this selectively if required.
> + */
> + if (!(new_plane_state->hw.fb->modifier != I915_FORMAT_MOD_X_TILED ||
> + new_plane_state->hw.fb->modifier != I915_FORMAT_MOD_Y_TILED ||
> + new_plane_state->hw.fb->modifier != I915_FORMAT_MOD_Yf_TILED)) {
I suspect a switch() would be less ugly
looks good otherwise
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> + drm_dbg_kms(&i915->drm,
> + "Linear memory/CCS does not support async flips\n");
> + return -EINVAL;
> + }
> +
> + if (old_plane_state->color_plane[0].stride !=
> + new_plane_state->color_plane[0].stride) {
> + drm_dbg_kms(&i915->drm, "Stride cannot be changed in async flip\n");
> + return -EINVAL;
> + }
> +
> + if (old_plane_state->hw.fb->modifier !=
> + new_plane_state->hw.fb->modifier) {
> + drm_dbg_kms(&i915->drm,
> + "Framebuffer modifiers cannot be changed in async flip\n");
> + return -EINVAL;
> + }
> +
> + if (old_plane_state->hw.fb->format !=
> + new_plane_state->hw.fb->format) {
> + drm_dbg_kms(&i915->drm,
> + "Framebuffer format cannot be changed in async flip\n");
> + return -EINVAL;
> + }
> +
> + if (old_plane_state->hw.rotation !=
> + new_plane_state->hw.rotation) {
> + drm_dbg_kms(&i915->drm, "Rotation cannot be changed in async flip\n");
> + return -EINVAL;
> + }
> +
> + if (!drm_rect_equals(&old_plane_state->uapi.src, &new_plane_state->uapi.src) ||
> + !drm_rect_equals(&old_plane_state->uapi.dst, &new_plane_state->uapi.dst)) {
> + drm_dbg_kms(&i915->drm,
> + "Plane size/co-ordinates cannot be changed in async flip\n");
> + return -EINVAL;
> + }
> +
> + if (old_plane_state->hw.alpha != new_plane_state->hw.alpha) {
> + drm_dbg_kms(&i915->drm, "Alpha value cannot be changed in async flip\n");
> + return -EINVAL;
> + }
> +
> + if (old_plane_state->hw.pixel_blend_mode !=
> + new_plane_state->hw.pixel_blend_mode) {
> + drm_dbg_kms(&i915->drm,
> + "Pixel blend mode cannot be changed in async flip\n");
> + return -EINVAL;
> + }
> +
> + if (old_plane_state->hw.color_encoding != new_plane_state->hw.color_encoding) {
> + drm_dbg_kms(&i915->drm,
> + "Color encoding cannot be changed in async flip\n");
> + return -EINVAL;
> + }
> +
> + if (old_plane_state->hw.color_range != new_plane_state->hw.color_range) {
> + drm_dbg_kms(&i915->drm, "Color range cannot be changed in async flip\n");
> + return -EINVAL;
> + }
> + }
> +
> + return 0;
> +}
> +
> /**
> * intel_atomic_check - validate state object
> * @dev: drm device
> @@ -15045,6 +15176,12 @@ static int intel_atomic_check(struct drm_device *dev,
>
> for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> new_crtc_state, i) {
> + if (new_crtc_state->uapi.async_flip) {
> + ret = intel_atomic_check_async(state);
> + if (ret)
> + goto fail;
> + }
> +
> if (!needs_modeset(new_crtc_state) &&
> !new_crtc_state->update_pipe)
> continue;
> --
> 2.22.0
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list