[Intel-gfx] [V14 1/5] drm/i915/dsi: Add details about TE in get_config

[Vandita Kulkarni]

We need details about enabling TE on which port
before we enable TE through vblank enable path.
This is based on the configuration that we receive
from the VBT wrt ports, dual_link.

Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 30 +++++++++++++++-----------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 520715b7d5b5..2789020e20db 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1447,6 +1447,18 @@ static bool gen11_dsi_is_periodic_cmd_mode(struct intel_dsi *intel_dsi)
 	return (val & DSI_PERIODIC_FRAME_UPDATE_ENABLE);
 }
 
+static void gen11_dsi_get_cmd_mode_config(struct intel_dsi *intel_dsi,
+					  struct intel_crtc_state *pipe_config)
+{
+	if (intel_dsi->ports == (BIT(PORT_B) | BIT(PORT_A)))
+		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_USE_TE1 |
+					    I915_MODE_FLAG_DSI_USE_TE0;
+	else if (intel_dsi->ports == BIT(PORT_B))
+		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_USE_TE1;
+	else
+		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_USE_TE0;
+}
+
 static void gen11_dsi_get_config(struct intel_encoder *encoder,
 				 struct intel_crtc_state *pipe_config)
 {
@@ -1468,6 +1480,10 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
 	pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
 	pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc);
 
+	/* Get the details on which TE should be enabled */
+	if (is_cmd_mode(intel_dsi))
+		gen11_dsi_get_cmd_mode_config(intel_dsi, pipe_config);
+
 	if (gen11_dsi_is_periodic_cmd_mode(intel_dsi))
 		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_PERIODIC_CMD_MODE;
 }
@@ -1562,18 +1578,8 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 	 * receive TE from the slave if
 	 * dual link is enabled
 	 */
-	if (is_cmd_mode(intel_dsi)) {
-		if (intel_dsi->ports == (BIT(PORT_B) | BIT(PORT_A)))
-			pipe_config->mode_flags |=
-						I915_MODE_FLAG_DSI_USE_TE1 |
-						I915_MODE_FLAG_DSI_USE_TE0;
-		else if (intel_dsi->ports == BIT(PORT_B))
-			pipe_config->mode_flags |=
-						I915_MODE_FLAG_DSI_USE_TE1;
-		else
-			pipe_config->mode_flags |=
-						I915_MODE_FLAG_DSI_USE_TE0;
-	}
+	if (is_cmd_mode(intel_dsi))
+		gen11_dsi_get_cmd_mode_config(intel_dsi, pipe_config);
 
 	return 0;
 }
-- 
2.21.0.5.gaeb582a