[Intel-gfx] [PATCH 2/3] drm/i915: Nuke lspcon_ycbcr420_config()
Ville Syrjala
ville.syrjala at linux.intel.com
Thu Sep 24 18:41:55 UTC 2020
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Remove the lspcon special case from intel_dp_compute_config() and
just treat it like any other DFP than can do 4:4:4->4:2:0 conversion.
The only difference between the two codepaths was that the lspcon
code tried to already halve port_clock. That was just total nonsense
as we hadn't even computed the base port_clock at that time.
All that stuff happens intel_dp_compute_link_config*() and it
already takes care of the 4:2:0 clock reduction.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 8 +++-----
drivers/gpu/drm/i915/display/intel_lspcon.c | 14 --------------
drivers/gpu/drm/i915/display/intel_lspcon.h | 2 --
3 files changed, 3 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 54a4b81ea3ff..f58df4994d92 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2713,7 +2713,6 @@ intel_dp_compute_config(struct intel_encoder *encoder,
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
- struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
enum port port = encoder->port;
struct intel_connector *intel_connector = intel_dp->attached_connector;
struct intel_digital_connector_state *intel_conn_state =
@@ -2727,10 +2726,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
- if (lspcon->active)
- lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
- else
- ret = intel_dp_ycbcr420_config(pipe_config, conn_state);
+ ret = intel_dp_ycbcr420_config(pipe_config, conn_state);
if (ret)
return ret;
@@ -6240,7 +6236,9 @@ intel_dp_update_420(struct intel_dp *intel_dp)
ycbcr_420_passthrough =
drm_dp_downstream_420_passthrough(intel_dp->dpcd,
intel_dp->downstream_ports);
+ /* on-board LSPCON always assumed to support 4:4:4->4:2:0 conversion */
ycbcr_444_to_420 =
+ dp_to_dig_port(intel_dp)->lspcon.active ||
drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd,
intel_dp->downstream_ports);
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
index 59f13aef58b5..bbe011c5f7a5 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
@@ -184,20 +184,6 @@ static bool lspcon_wake_native_aux_ch(struct intel_lspcon *lspcon)
return true;
}
-void lspcon_ycbcr420_config(struct drm_connector *connector,
- struct intel_crtc_state *crtc_state)
-{
- const struct drm_display_info *info = &connector->display_info;
- const struct drm_display_mode *adjusted_mode =
- &crtc_state->hw.adjusted_mode;
-
- if (drm_mode_is_420_only(info, adjusted_mode) &&
- connector->ycbcr_420_allowed) {
- crtc_state->port_clock /= 2;
- crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR444;
- }
-}
-
static bool lspcon_probe(struct intel_lspcon *lspcon)
{
int retry;
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.h b/drivers/gpu/drm/i915/display/intel_lspcon.h
index 1cffe8a42a08..31eebab9ed57 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.h
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.h
@@ -32,7 +32,5 @@ void lspcon_set_infoframes(struct intel_encoder *encoder,
const struct drm_connector_state *conn_state);
u32 lspcon_infoframes_enabled(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config);
-void lspcon_ycbcr420_config(struct drm_connector *connector,
- struct intel_crtc_state *crtc_state);
#endif /* __INTEL_LSPCON_H__ */
--
2.26.2
More information about the Intel-gfx
mailing list