[Intel-gfx] [PATCH v4 05/18] drm/i915/dg2: Add SQIDI steering

[Lucas De Marchi]

On Thu, Jul 29, 2021 at 09:59:55AM -0700, Matt Roper wrote:
>Although DG2_G10 platforms will always have all SQIDI's present and
>don't need steering for registers in a SQIDI MMIO range, this isn't true
>for DG2_G11 platforms; only SQIDI's 2 and 3 can be used on those.
>
>We handle SQIDI ranges a bit differently from other types of explicit
>steering.  The SQIDI ranges belong to either the MCFG unit or the SF
>unit, both of which have their own dedicated steering registers and do
>not use the typical 0xFDC steering control that all other types of
>ranges use.  Thus we only need to worry about picking a valid initial
>value for the MCFG and SF steering registers (0xFD0 and 0xFD8
>resepectively) at driver init; they won't change after we set them up so

respectively

>we don't need to worry about re-steering them explicitly at runtime.
>
>Given that any SQIDI value should work fine for DG2-G10 and XeHP SDV,
>while only values of 2 and 3 are valid for DG2-G11, we'll just
>initialize the MCFG and SF steering registers to a constant value of "2"
>for all XeHP-based platforms for simplicity --- that will work in all
>cases.
>
>Bspec: 66534
>Cc: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
>Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
>---
> drivers/gpu/drm/i915/gt/intel_workarounds.c | 28 +++++++++++++++++----
> drivers/gpu/drm/i915/i915_reg.h             |  2 ++
> 2 files changed, 25 insertions(+), 5 deletions(-)
>
>diff --git a/drivers/gpu/drm/i915/gt/intel_workarounds.c b/drivers/gpu/drm/i915/gt/intel_workarounds.c
>index 8717337a6c81..6895b083523d 100644
>--- a/drivers/gpu/drm/i915/gt/intel_workarounds.c
>+++ b/drivers/gpu/drm/i915/gt/intel_workarounds.c
>@@ -889,17 +889,24 @@ cfl_gt_workarounds_init(struct drm_i915_private *i915, struct i915_wa_list *wal)
> 		    GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS);
> }
>
>-static void __add_mcr_wa(struct drm_i915_private *i915, struct i915_wa_list *wal,
>-			 unsigned slice, unsigned subslice)
>+static void __set_mcr_steering(struct i915_wa_list *wal,
>+			       i915_reg_t steering_reg,
>+			       unsigned int slice, unsigned int subslice)
> {
> 	u32 mcr, mcr_mask;
>
> 	mcr = GEN11_MCR_SLICE(slice) | GEN11_MCR_SUBSLICE(subslice);
> 	mcr_mask = GEN11_MCR_SLICE_MASK | GEN11_MCR_SUBSLICE_MASK;
>
>-	drm_dbg(&i915->drm, "MCR slice/subslice = %x\n", mcr);
>+	wa_write_clr_set(wal, steering_reg, mcr_mask, mcr);
>+}
>+
>+static void __add_mcr_wa(struct drm_i915_private *i915, struct i915_wa_list *wal,
>+			 unsigned int slice, unsigned int subslice)
>+{
>+	drm_dbg(&i915->drm, "MCR slice=0x%x, subslice=0x%x\n", slice, subslice);

maybe we could leave the debug message in __set_mcr_steering() and add
what steering register we are setting? Up to you.


Reviewed-by: Lucas De Marchi <lucas.demarchi at intel.com>


>
>-	wa_write_clr_set(wal, GEN8_MCR_SELECTOR, mcr_mask, mcr);
>+	__set_mcr_steering(wal, GEN8_MCR_SELECTOR, slice, subslice);
> }
>
> static void
>@@ -953,7 +960,6 @@ xehp_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal)
> 	 * - L3 Bank (fusable)
> 	 * - MSLICE (fusable)
> 	 * - LNCF (sub-unit within mslice; always present if mslice is present)
>-	 * - SQIDI (always on)
> 	 *
> 	 * We'll do our default/implicit steering based on GSLICE (in the
> 	 * sliceid field) and DSS (in the subsliceid field).  If we can
>@@ -1003,6 +1009,18 @@ xehp_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal)
> 	WARN_ON(dss_mask >> (slice * GEN_DSS_PER_GSLICE) == 0);
>
> 	__add_mcr_wa(i915, wal, slice, subslice);
>+
>+	/*
>+	 * SQIDI ranges are special because they use different steering
>+	 * registers than everything else we work with.  On XeHP SDV and
>+	 * DG2-G10, any value in the steering registers will work fine since
>+	 * all instances are present, but DG2-G11 only has SQIDI instances at
>+	 * ID's 2 and 3, so we need to steer to one of those.  For simplicity
>+	 * we'll just steer to a hardcoded "2" since that value will work
>+	 * everywhere.
>+	 */
>+	__set_mcr_steering(wal, MCFG_MCR_SELECTOR, 0, 2);
>+	__set_mcr_steering(wal, SF_MCR_SELECTOR, 0, 2);
> }
>
> static void
>diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>index f4113e7e8271..39ce6befff52 100644
>--- a/drivers/gpu/drm/i915/i915_reg.h
>+++ b/drivers/gpu/drm/i915/i915_reg.h
>@@ -2757,6 +2757,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
> #define GEN12_SC_INSTDONE_EXTRA2	_MMIO(0x7108)
> #define GEN7_SAMPLER_INSTDONE	_MMIO(0xe160)
> #define GEN7_ROW_INSTDONE	_MMIO(0xe164)
>+#define MCFG_MCR_SELECTOR		_MMIO(0xfd0)
>+#define SF_MCR_SELECTOR			_MMIO(0xfd8)
> #define GEN8_MCR_SELECTOR		_MMIO(0xfdc)
> #define   GEN8_MCR_SLICE(slice)		(((slice) & 3) << 26)
> #define   GEN8_MCR_SLICE_MASK		GEN8_MCR_SLICE(3)
>-- 
>2.25.4
>
>_______________________________________________
>Intel-gfx mailing list
>Intel-gfx at lists.freedesktop.org
>https://lists.freedesktop.org/mailman/listinfo/intel-gfx