[Intel-gfx] [V3 2/7] drm/i915/jsl: program DSI panel GPIOs

[Jani Nikula]

On Fri, 23 Jul 2021, Lee Shawn C <shawn.c.lee at intel.com> wrote:
> DSI driver should have its own implementation to toggle
> gpio pins based on GPIO info coming from VBT sequences.

Why?

>
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
> Cc: Cooper Chiou <cooper.chiou at intel.com>
> Cc: William Tseng <william.tseng at intel.com>
> Signed-off-by: Lee Shawn C <shawn.c.lee at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 44 +++++++++++++++++++-
>  drivers/gpu/drm/i915/i915_reg.h              | 10 +++++
>  2 files changed, 53 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> index cc93e045a425..dd03e5629ba6 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> @@ -43,6 +43,7 @@
>  #include "intel_display_types.h"
>  #include "intel_dsi.h"
>  #include "intel_sideband.h"
> +#include "intel_de.h"
>  
>  #define MIPI_TRANSFER_MODE_SHIFT	0
>  #define MIPI_VIRTUAL_CHANNEL_SHIFT	1
> @@ -354,7 +355,48 @@ static void bxt_exec_gpio(struct drm_i915_private *dev_priv,
>  static void icl_exec_gpio(struct drm_i915_private *dev_priv,
>  			  u8 gpio_source, u8 gpio_index, bool value)
>  {
> -	drm_dbg_kms(&dev_priv->drm, "Skipping ICL GPIO element execution\n");
> +	u32 val;
> +
> +	switch (gpio_index) {
> +	case ICL_GPIO_L_VDDEN_1:
> +		val = intel_de_read(dev_priv, ICP_PP_CONTROL(1));
> +		if (value)
> +			val |= PWR_STATE_TARGET;
> +		else
> +			val &= ~PWR_STATE_TARGET;
> +		intel_de_write(dev_priv, ICP_PP_CONTROL(1), val);

All the PPS access should be in intel_pps.[ch] and protected with the
pps mutex.

> +		break;
> +	case ICL_GPIO_L_BKLTEN_1:
> +		val = intel_de_read(dev_priv, ICP_PP_CONTROL(1));
> +		if (value)
> +			val |= BACKLIGHT_ENABLE;
> +		else
> +			val &= ~BACKLIGHT_ENABLE;
> +		intel_de_write(dev_priv, ICP_PP_CONTROL(1), val);
> +		break;
> +	case ICL_GPIO_DDPA_CTRLCLK_1:
> +		val = intel_de_read(dev_priv, GPIO(1));
> +		if (value)
> +			val |= GPIO_CLOCK_VAL_OUT;
> +		else
> +			val &= ~GPIO_CLOCK_VAL_OUT;
> +		val |= GPIO_CLOCK_DIR_MASK | GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_VAL_MASK;
> +		intel_de_write(dev_priv, GPIO(1), val);
> +		break;
> +	case ICL_GPIO_DDPA_CTRLDATA_1:
> +		val = intel_de_read(dev_priv, GPIO(1));
> +		if (value)
> +			val |= GPIO_DATA_VAL_OUT;
> +		else
> +			val &= ~GPIO_DATA_VAL_OUT;
> +		val |= GPIO_DATA_DIR_MASK | GPIO_DATA_DIR_OUT | GPIO_DATA_VAL_MASK;
> +		intel_de_write(dev_priv, GPIO(1), val);
> +		break;
> +	default:
> +		/* TODO: Add support for remaining GPIOs */
> +		DRM_ERROR("Invalid GPIO number (%d) from VBT\n", gpio_index);
> +		break;
> +	}
>  }
>  
>  static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 943fe485c662..b725234e0e9c 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -5143,6 +5143,16 @@ enum {
>  #define _PP_STATUS			0x61200
>  #define PP_STATUS(pps_idx)		_MMIO_PPS(pps_idx, _PP_STATUS)
>  #define   PP_ON				REG_BIT(31)
> +
> +#define _PP_CONTROL_1			0xc7204
> +#define _PP_CONTROL_2			0xc7304
> +#define ICP_PP_CONTROL(x)		_MMIO(((x) == 1) ? _PP_CONTROL_1 : \
> +					      _PP_CONTROL_2)
> +#define  POWER_CYCLE_DELAY_MASK		REG_GENMASK(8, 4)
> +#define  VDD_OVERRIDE_FORCE		REG_BIT(3)
> +#define  BACKLIGHT_ENABLE		REG_BIT(2)
> +#define  PWR_DOWN_ON_RESET		REG_BIT(1)
> +#define  PWR_STATE_TARGET		REG_BIT(0)

These are all duplicate defines for existing PP_CONTROL() registers and
macros.

>  /*
>   * Indicates that all dependencies of the panel are on:
>   *

-- 
Jani Nikula, Intel Open Source Graphics Center