[Intel-gfx] [V3 2/7] drm/i915/jsl: program DSI panel GPIOs

[Jani Nikula]

On Tue, 10 Aug 2021, "Lee, Shawn C" <shawn.c.lee at intel.com> wrote:
> On Tue, 10 Aug 2021, Jani Nikula <jani.nikula at linux.intel.com> wrote:
>>On Fri, 23 Jul 2021, Lee Shawn C <shawn.c.lee at intel.com> wrote:
>>> DSI driver should have its own implementation to toggle gpio pins
>>> based on GPIO info coming from VBT sequences.
>>
>>Why?
>>
>
> Without this change, we are not able to control gpio signal output to
> meet MIPI panel's requirement for power on/off sequence.
>
>>>
>>> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
>>> Cc: Jani Nikula <jani.nikula at linux.intel.com>
>>> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
>>> Cc: Cooper Chiou <cooper.chiou at intel.com>
>>> Cc: William Tseng <william.tseng at intel.com>
>>> Signed-off-by: Lee Shawn C <shawn.c.lee at intel.com>
>>> ---
>>>  drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 44 +++++++++++++++++++-
>>>  drivers/gpu/drm/i915/i915_reg.h              | 10 +++++
>>>  2 files changed, 53 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
>>> b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
>>> index cc93e045a425..dd03e5629ba6 100644
>>> --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
>>> +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
>>> @@ -43,6 +43,7 @@
>>>  #include "intel_display_types.h"
>>>  #include "intel_dsi.h"
>>>  #include "intel_sideband.h"
>>> +#include "intel_de.h"
>>>
>>>  #define MIPI_TRANSFER_MODE_SHIFT    0
>>>  #define MIPI_VIRTUAL_CHANNEL_SHIFT  1
>>> @@ -354,7 +355,48 @@ static void bxt_exec_gpio(struct drm_i915_private
>>> *dev_priv,  static void icl_exec_gpio(struct drm_i915_private *dev_priv,
>>>                        u8 gpio_source, u8 gpio_index, bool value)  {
>>> -    drm_dbg_kms(&dev_priv->drm, "Skipping ICL GPIO element execution\n");
>>> +    u32 val;
>>> +
>>> +    switch (gpio_index) {
>>> +    case ICL_GPIO_L_VDDEN_1:
>>> +            val = intel_de_read(dev_priv, ICP_PP_CONTROL(1));
>>> +            if (value)
>>> +                    val |= PWR_STATE_TARGET;
>>> +            else
>>> +                    val &= ~PWR_STATE_TARGET;
>>> +            intel_de_write(dev_priv, ICP_PP_CONTROL(1), val);
>>
>>All the PPS access should be in intel_pps.[ch] and protected with the pps mutex.
>>
>
> OK! We will move icl_exec_gpio() into intel_pps.c and use pps mutex to protect it.
>
>>> +            break;
>>> +    case ICL_GPIO_L_BKLTEN_1:
>>> +            val = intel_de_read(dev_priv, ICP_PP_CONTROL(1));
>>> +            if (value)
>>> +                    val |= BACKLIGHT_ENABLE;
>>> +            else
>>> +                    val &= ~BACKLIGHT_ENABLE;
>>> +            intel_de_write(dev_priv, ICP_PP_CONTROL(1), val);
>>> +            break;
>>> +    case ICL_GPIO_DDPA_CTRLCLK_1:
>>> +            val = intel_de_read(dev_priv, GPIO(1));
>>> +            if (value)
>>> +                    val |= GPIO_CLOCK_VAL_OUT;
>>> +            else
>>> +                    val &= ~GPIO_CLOCK_VAL_OUT;
>>> +            val |= GPIO_CLOCK_DIR_MASK | GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_VAL_MASK;
>>> +            intel_de_write(dev_priv, GPIO(1), val);
>>> +            break;
>>> +    case ICL_GPIO_DDPA_CTRLDATA_1:
>>> +            val = intel_de_read(dev_priv, GPIO(1));
>>> +            if (value)
>>> +                    val |= GPIO_DATA_VAL_OUT;
>>> +            else
>>> +                    val &= ~GPIO_DATA_VAL_OUT;
>>> +            val |= GPIO_DATA_DIR_MASK | GPIO_DATA_DIR_OUT | GPIO_DATA_VAL_MASK;
>>> +            intel_de_write(dev_priv, GPIO(1), val);
>>> +            break;
>>> +    default:
>>> +            /* TODO: Add support for remaining GPIOs */
>>> +            DRM_ERROR("Invalid GPIO number (%d) from VBT\n", gpio_index);
>>> +            break;
>>> +    }
>>>  }
>>>
>>>  static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8
>>> *data) diff --git a/drivers/gpu/drm/i915/i915_reg.h
>>> b/drivers/gpu/drm/i915/i915_reg.h index 943fe485c662..b725234e0e9c
>>> 100644
>>> --- a/drivers/gpu/drm/i915/i915_reg.h
>>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>>> @@ -5143,6 +5143,16 @@ enum {
>>>  #define _PP_STATUS                  0x61200
>>>  #define PP_STATUS(pps_idx)          _MMIO_PPS(pps_idx, _PP_STATUS)
>>>  #define   PP_ON                             REG_BIT(31)
>>> +
>>> +#define _PP_CONTROL_1                       0xc7204
>>> +#define _PP_CONTROL_2                       0xc7304
>>> +#define ICP_PP_CONTROL(x)           _MMIO(((x) == 1) ? _PP_CONTROL_1 : \
>>> +                                          _PP_CONTROL_2)
>>> +#define  POWER_CYCLE_DELAY_MASK             REG_GENMASK(8, 4)
>>> +#define  VDD_OVERRIDE_FORCE         REG_BIT(3)
>>> +#define  BACKLIGHT_ENABLE           REG_BIT(2)
>>> +#define  PWR_DOWN_ON_RESET          REG_BIT(1)
>>> +#define  PWR_STATE_TARGET           REG_BIT(0)
>>
>>These are all duplicate defines for existing PP_CONTROL() registers and macros.
>
> I found this patch on drm-tip branch and removed PP_CONTRL() defines.
> https://patchwork.freedesktop.org/patch/291095/

Look for PP_CONTROL(), not ICL_PP_CONTROL().


>
> Best regards,
> Shawn
>
>>
>>>  /*
>>>   * Indicates that all dependencies of the panel are on:
>>>   *
>>
>>--
>>Jani Nikula, Intel Open Source Graphics Center
>>

-- 
Jani Nikula, Intel Open Source Graphics Center