[Intel-gfx] [PATCH v3 2/3] drm/i915/hdcp: read RxInfo once when reading RepeaterAuth_Send_ReceiverID_List
Rodrigo Vivi
rodrigo.vivi at intel.com
Wed Aug 11 19:34:20 UTC 2021
On Tue, Aug 10, 2021 at 04:52:11PM -0700, Juston Li wrote:
> When reading RepeaterAuth_Send_ReceiverID_List, RxInfo is read by itself
> once to retrieve the DEVICE_COUNT to calculate the size of the
> ReceiverID list then read a second time as a part of reading ReceiverID
> list.
>
> On some MST docking stations, RxInfo can only be read after the RxStatus
> READY bit is set otherwise the read will return -EIO. The spec states that
> the READY bit should be cleared as soon as RxInfo has been read.
>
> In this case, the first RxInfo read succeeds but after the READY bit is
> cleared, the second read fails.
>
> Fix it by reading RxInfo once and storing it before reading the rest of
> RepeaterAuth_Send_ReceiverID_List once we know the size.
>
> Modify get_receiver_id_list_size() to read and store RxInfo in the
> message buffer and also parse DEVICE_COUNT so we know the size of
> RepeaterAuth_Send_ReceiverID_List.
>
> Afterwards, retrieve the rest of the message at the offset for
> seq_num_V.
>
> Changes in v4:
> - rebase and edit commit message
>
> Changes in v3:
> - remove comment
>
> Changes in v2:
> - remove unnecessary moving of drm_i915_private from patch 1
>
> Signed-off-by: Juston Li <juston.li at intel.com>
> Acked-by: Anshuman Gupta <anshuman.gupta at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 30 ++++++++++----------
> include/drm/drm_dp_helper.h | 2 +-
> 2 files changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> index 1d0096654776..526fd58b9b51 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> @@ -496,11 +496,10 @@ get_rxinfo_hdcp_1_dev_downstream(struct intel_digital_port *dig_port, bool *hdcp
> }
>
> static
> -ssize_t get_receiver_id_list_size(struct intel_digital_port *dig_port)
> +ssize_t get_receiver_id_list_rx_info(struct intel_digital_port *dig_port, u32 *dev_cnt, u8 *byte)
> {
> - u8 rx_info[HDCP_2_2_RXINFO_LEN];
> - u32 dev_cnt;
> ssize_t ret;
> + u8 *rx_info = byte;
>
> ret = drm_dp_dpcd_read(&dig_port->dp.aux,
> DP_HDCP_2_2_REG_RXINFO_OFFSET,
> @@ -508,15 +507,11 @@ ssize_t get_receiver_id_list_size(struct intel_digital_port *dig_port)
> if (ret != HDCP_2_2_RXINFO_LEN)
> return ret >= 0 ? -EIO : ret;
>
> - dev_cnt = (HDCP_2_2_DEV_COUNT_HI(rx_info[0]) << 4 |
> + *dev_cnt = (HDCP_2_2_DEV_COUNT_HI(rx_info[0]) << 4 |
> HDCP_2_2_DEV_COUNT_LO(rx_info[1]));
>
> - if (dev_cnt > HDCP_2_2_MAX_DEVICE_COUNT)
> - dev_cnt = HDCP_2_2_MAX_DEVICE_COUNT;
> -
> - ret = sizeof(struct hdcp2_rep_send_receiverid_list) -
> - HDCP_2_2_RECEIVER_IDS_MAX_LEN +
> - (dev_cnt * HDCP_2_2_RECEIVER_ID_LEN);
> + if (*dev_cnt > HDCP_2_2_MAX_DEVICE_COUNT)
> + *dev_cnt = HDCP_2_2_MAX_DEVICE_COUNT;
>
> return ret;
> }
> @@ -534,6 +529,7 @@ int intel_dp_hdcp2_read_msg(struct intel_digital_port *dig_port,
> const struct hdcp2_dp_msg_data *hdcp2_msg_data;
> ktime_t msg_end = ktime_set(0, 0);
> bool msg_expired;
> + u32 dev_cnt;
>
> hdcp2_msg_data = get_hdcp2_dp_msg_data(msg_id);
> if (!hdcp2_msg_data)
> @@ -546,17 +542,21 @@ int intel_dp_hdcp2_read_msg(struct intel_digital_port *dig_port,
>
> hdcp->cp_irq_count_cached = atomic_read(&hdcp->cp_irq_count);
>
> + /* DP adaptation msgs has no msg_id */
> + byte++;
> +
> if (msg_id == HDCP_2_2_REP_SEND_RECVID_LIST) {
> - ret = get_receiver_id_list_size(dig_port);
> + ret = get_receiver_id_list_rx_info(dig_port, &dev_cnt, byte);
> if (ret < 0)
> return ret;
>
> - size = ret;
> + byte += ret;
> + size = sizeof(struct hdcp2_rep_send_receiverid_list) -
> + HDCP_2_2_RXINFO_LEN - HDCP_2_2_RECEIVER_IDS_MAX_LEN +
> + (dev_cnt * HDCP_2_2_RECEIVER_ID_LEN);
> }
> - bytes_to_recv = size - 1;
>
> - /* DP adaptation msgs has no msg_id */
> - byte++;
> + bytes_to_recv = size - 1;
>
> while (bytes_to_recv) {
> len = bytes_to_recv > DP_AUX_MAX_PAYLOAD_BYTES ?
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
I was about to merge to drm-intel-next but then I noticed this..
So we need to cc Dave and Daniel here to get an ack from them.
> index 3f2715eb965f..7476e7c6d0be 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -1413,7 +1413,7 @@ enum drm_dp_phy {
> #define DP_HDCP_2_2_LC_INIT_OFFSET DP_HDCP_2_2_REG_RN_OFFSET
> #define DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET DP_HDCP_2_2_REG_LPRIME_OFFSET
> #define DP_HDCP_2_2_SKE_SEND_EKS_OFFSET DP_HDCP_2_2_REG_EDKEY_KS_OFFSET
> -#define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET DP_HDCP_2_2_REG_RXINFO_OFFSET
> +#define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET DP_HDCP_2_2_REG_SEQ_NUM_V_OFFSET
I'm not familiar with this so I'm not sure if this should be a separated patch
or better explained in the commit message.
Dave/Daniel how do you prefer this?
> #define DP_HDCP_2_2_REP_SEND_ACK_OFFSET DP_HDCP_2_2_REG_V_OFFSET
> #define DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET
> #define DP_HDCP_2_2_REP_STREAM_READY_OFFSET DP_HDCP_2_2_REG_MPRIME_OFFSET
> --
> 2.31.1
>
More information about the Intel-gfx
mailing list