[Intel-gfx] [PATCH 2/8] drm/i915/display: Drop PSR support from HSW and BDW
José Roberto de Souza
jose.souza at intel.com
Wed Aug 18 00:42:10 UTC 2021
At this point is sure that HSW and BDW will never have PSR enabled by
default, so here dropping it from device info and cleaning up code.
v2:
- enable psr support for display 9
Cc: Gwan-gyeong Mun <gwan-gyeong.mun at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
drivers/gpu/drm/i915/display/intel_psr.c | 97 ++++--------------------
drivers/gpu/drm/i915/i915_drv.h | 2 -
drivers/gpu/drm/i915/i915_irq.c | 16 ----
drivers/gpu/drm/i915/i915_pci.c | 4 +-
drivers/gpu/drm/i915/i915_reg.h | 21 ++---
5 files changed, 20 insertions(+), 120 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index cade37f67f33c..3f6fb7d67f84d 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -364,41 +364,6 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
}
}
-static void hsw_psr_setup_aux(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- u32 aux_clock_divider, aux_ctl;
- int i;
- static const u8 aux_msg[] = {
- [0] = DP_AUX_NATIVE_WRITE << 4,
- [1] = DP_SET_POWER >> 8,
- [2] = DP_SET_POWER & 0xff,
- [3] = 1 - 1,
- [4] = DP_SET_POWER_D0,
- };
- u32 psr_aux_mask = EDP_PSR_AUX_CTL_TIME_OUT_MASK |
- EDP_PSR_AUX_CTL_MESSAGE_SIZE_MASK |
- EDP_PSR_AUX_CTL_PRECHARGE_2US_MASK |
- EDP_PSR_AUX_CTL_BIT_CLOCK_2X_MASK;
-
- BUILD_BUG_ON(sizeof(aux_msg) > 20);
- for (i = 0; i < sizeof(aux_msg); i += 4)
- intel_de_write(dev_priv,
- EDP_PSR_AUX_DATA(intel_dp->psr.transcoder, i >> 2),
- intel_dp_pack_aux(&aux_msg[i], sizeof(aux_msg) - i));
-
- aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
-
- /* Start with bits set for DDI_AUX_CTL register */
- aux_ctl = intel_dp->get_aux_send_ctl(intel_dp, sizeof(aux_msg),
- aux_clock_divider);
-
- /* Select only valid bits for SRD_AUX_CTL */
- aux_ctl &= psr_aux_mask;
- intel_de_write(dev_priv, EDP_PSR_AUX_CTL(intel_dp->psr.transcoder),
- aux_ctl);
-}
-
static void intel_psr_enable_sink(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
@@ -621,9 +586,7 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
static bool
transcoder_has_psr2(struct drm_i915_private *dev_priv, enum transcoder trans)
{
- if (DISPLAY_VER(dev_priv) < 9)
- return false;
- else if (DISPLAY_VER(dev_priv) >= 12)
+ if (DISPLAY_VER(dev_priv) >= 12)
return trans == TRANSCODER_A;
else
return trans == TRANSCODER_EDP;
@@ -1114,12 +1077,6 @@ static void intel_psr_enable_source(struct intel_dp *intel_dp)
enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
u32 mask;
- /* Only HSW and BDW have PSR AUX registers that need to be setup. SKL+
- * use hardcoded values PSR AUX transactions
- */
- if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
- hsw_psr_setup_aux(intel_dp);
-
if (intel_dp->psr.psr2_enabled && DISPLAY_VER(dev_priv) == 9) {
i915_reg_t reg = CHICKEN_TRANS(cpu_transcoder);
u32 chicken = intel_de_read(dev_priv, reg);
@@ -1460,23 +1417,16 @@ static void psr_force_hw_tracking_exit(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- if (DISPLAY_VER(dev_priv) >= 9)
- /*
- * Display WA #0884: skl+
- * This documented WA for bxt can be safely applied
- * broadly so we can force HW tracking to exit PSR
- * instead of disabling and re-enabling.
- * Workaround tells us to write 0 to CUR_SURFLIVE_A,
- * but it makes more sense write to the current active
- * pipe.
- */
- intel_de_write(dev_priv, CURSURFLIVE(intel_dp->psr.pipe), 0);
- else
- /*
- * A write to CURSURFLIVE do not cause HW tracking to exit PSR
- * on older gens so doing the manual exit instead.
- */
- intel_psr_exit(intel_dp);
+ /*
+ * Display WA #0884: skl+
+ * This documented WA for bxt can be safely applied
+ * broadly so we can force HW tracking to exit PSR
+ * instead of disabling and re-enabling.
+ * Workaround tells us to write 0 to CUR_SURFLIVE_A,
+ * but it makes more sense write to the current active
+ * pipe.
+ */
+ intel_de_write(dev_priv, CURSURFLIVE(intel_dp->psr.pipe), 0);
}
void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
@@ -1744,7 +1694,6 @@ void intel_psr_update(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
struct intel_psr *psr = &intel_dp->psr;
bool enable, psr2_enable;
@@ -1761,15 +1710,6 @@ void intel_psr_update(struct intel_dp *intel_dp,
/* Force a PSR exit when enabling CRC to avoid CRC timeouts */
if (crtc_state->crc_enabled && psr->enabled)
psr_force_hw_tracking_exit(intel_dp);
- else if (DISPLAY_VER(dev_priv) < 9 && psr->enabled) {
- /*
- * Activate PSR again after a force exit when enabling
- * CRC in older gens
- */
- if (!intel_dp->psr.active &&
- !intel_dp->psr.busy_frontbuffer_bits)
- schedule_work(&intel_dp->psr.work);
- }
goto unlock;
}
@@ -2182,23 +2122,12 @@ void intel_psr_init(struct intel_dp *intel_dp)
intel_dp->psr.source_support = true;
- if (IS_HASWELL(dev_priv))
- /*
- * HSW don't have PSR registers on the same space as transcoder
- * so set this to a value that when subtract to the register
- * in transcoder space results in the right offset for HSW
- */
- dev_priv->hsw_psr_mmio_adjust = _SRD_CTL_EDP - _HSW_EDP_PSR_BASE;
-
if (dev_priv->params.enable_psr == -1)
- if (DISPLAY_VER(dev_priv) < 9 || !dev_priv->vbt.psr.enable)
+ if (!dev_priv->vbt.psr.enable)
dev_priv->params.enable_psr = 0;
/* Set link_standby x link_off defaults */
- if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
- /* HSW and BDW require workarounds that we don't implement. */
- intel_dp->psr.link_standby = false;
- else if (DISPLAY_VER(dev_priv) < 12)
+ if (DISPLAY_VER(dev_priv) < 12)
/* For new platforms up to TGL let's respect VBT back again */
intel_dp->psr.link_standby = dev_priv->vbt.psr.full_link;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 005b1cec70075..1ea27c4e94a6d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -886,8 +886,6 @@ struct drm_i915_private {
*/
u32 gpio_mmio_base;
- u32 hsw_psr_mmio_adjust;
-
/* MMIO base address for MIPI regs */
u32 mipi_mmio_base;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9bc4f4a8e12ec..45c0b51a8da17 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2093,22 +2093,6 @@ static void ivb_display_irq_handler(struct drm_i915_private *dev_priv,
if (de_iir & DE_ERR_INT_IVB)
ivb_err_int_handler(dev_priv);
- if (de_iir & DE_EDP_PSR_INT_HSW) {
- struct intel_encoder *encoder;
-
- for_each_intel_encoder_with_psr(&dev_priv->drm, encoder) {
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-
- u32 psr_iir = intel_uncore_read(&dev_priv->uncore,
- EDP_PSR_IIR);
-
- intel_psr_irq_handler(intel_dp, psr_iir);
- intel_uncore_write(&dev_priv->uncore,
- EDP_PSR_IIR, psr_iir);
- break;
- }
- }
-
if (de_iir & DE_AUX_CHANNEL_A_IVB)
dp_aux_irq_handler(dev_priv);
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 93ccdc6bbd032..895b9eeebef40 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -537,8 +537,6 @@ static const struct intel_device_info vlv_info = {
BIT(TRANSCODER_C) | BIT(TRANSCODER_EDP), \
.display.has_ddi = 1, \
.display.has_fpga_dbg = 1, \
- .display.has_psr = 1, \
- .display.has_psr_hw_tracking = 1, \
.display.has_dp_mst = 1, \
.has_rc6p = 0 /* RC6p removed-by HSW */, \
HSW_PIPE_OFFSETS, \
@@ -642,6 +640,8 @@ static const struct intel_device_info chv_info = {
.has_gt_uc = 1, \
.display.has_hdcp = 1, \
.display.has_ipc = 1, \
+ .display.has_psr = 1, \
+ .display.has_psr_hw_tracking = 1, \
.dbuf.size = 896 - 4, /* 4 blocks for bypass path allocation */ \
.dbuf.slice_mask = BIT(DBUF_S1)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 72dd3a6d205d6..ee16a594ef995 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4512,11 +4512,9 @@ enum {
* HSW PSR registers are relative to DDIA(_DDI_BUF_CTL_A + 0x800) with just one
* instance of it
*/
-#define _HSW_EDP_PSR_BASE 0x64800
#define _SRD_CTL_A 0x60800
#define _SRD_CTL_EDP 0x6f800
-#define _PSR_ADJ(tran, reg) (_TRANS2(tran, reg) - dev_priv->hsw_psr_mmio_adjust)
-#define EDP_PSR_CTL(tran) _MMIO(_PSR_ADJ(tran, _SRD_CTL_A))
+#define EDP_PSR_CTL(tran) _MMIO(_TRANS2(tran, _SRD_CTL_A))
#define EDP_PSR_ENABLE (1 << 31)
#define BDW_PSR_SINGLE_FRAME (1 << 30)
#define EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK (1 << 29) /* SW can't modify */
@@ -4560,22 +4558,13 @@ enum {
#define EDP_PSR_POST_EXIT(trans) (0x2 << _EDP_PSR_TRANS_SHIFT(trans))
#define EDP_PSR_PRE_ENTRY(trans) (0x1 << _EDP_PSR_TRANS_SHIFT(trans))
-#define _SRD_AUX_CTL_A 0x60810
-#define _SRD_AUX_CTL_EDP 0x6f810
-#define EDP_PSR_AUX_CTL(tran) _MMIO(_PSR_ADJ(tran, _SRD_AUX_CTL_A))
-#define EDP_PSR_AUX_CTL_TIME_OUT_MASK (3 << 26)
-#define EDP_PSR_AUX_CTL_MESSAGE_SIZE_MASK (0x1f << 20)
-#define EDP_PSR_AUX_CTL_PRECHARGE_2US_MASK (0xf << 16)
-#define EDP_PSR_AUX_CTL_ERROR_INTERRUPT (1 << 11)
-#define EDP_PSR_AUX_CTL_BIT_CLOCK_2X_MASK (0x7ff)
-
#define _SRD_AUX_DATA_A 0x60814
#define _SRD_AUX_DATA_EDP 0x6f814
-#define EDP_PSR_AUX_DATA(tran, i) _MMIO(_PSR_ADJ(tran, _SRD_AUX_DATA_A) + (i) + 4) /* 5 registers */
+#define EDP_PSR_AUX_DATA(tran, i) _MMIO(_TRANS2(tran, _SRD_AUX_DATA_A) + (i) + 4) /* 5 registers */
#define _SRD_STATUS_A 0x60840
#define _SRD_STATUS_EDP 0x6f840
-#define EDP_PSR_STATUS(tran) _MMIO(_PSR_ADJ(tran, _SRD_STATUS_A))
+#define EDP_PSR_STATUS(tran) _MMIO(_TRANS2(tran, _SRD_STATUS_A))
#define EDP_PSR_STATUS_STATE_MASK (7 << 29)
#define EDP_PSR_STATUS_STATE_SHIFT 29
#define EDP_PSR_STATUS_STATE_IDLE (0 << 29)
@@ -4602,13 +4591,13 @@ enum {
#define _SRD_PERF_CNT_A 0x60844
#define _SRD_PERF_CNT_EDP 0x6f844
-#define EDP_PSR_PERF_CNT(tran) _MMIO(_PSR_ADJ(tran, _SRD_PERF_CNT_A))
+#define EDP_PSR_PERF_CNT(tran) _MMIO(_TRANS2(tran, _SRD_PERF_CNT_A))
#define EDP_PSR_PERF_CNT_MASK 0xffffff
/* PSR_MASK on SKL+ */
#define _SRD_DEBUG_A 0x60860
#define _SRD_DEBUG_EDP 0x6f860
-#define EDP_PSR_DEBUG(tran) _MMIO(_PSR_ADJ(tran, _SRD_DEBUG_A))
+#define EDP_PSR_DEBUG(tran) _MMIO(_TRANS2(tran, _SRD_DEBUG_A))
#define EDP_PSR_DEBUG_MASK_MAX_SLEEP (1 << 28)
#define EDP_PSR_DEBUG_MASK_LPSP (1 << 27)
#define EDP_PSR_DEBUG_MASK_MEMUP (1 << 26)
--
2.32.0
More information about the Intel-gfx
mailing list