[Intel-gfx] [PATCH 05/17] drm/i915/dp: use actual link rate values in struct link_config_limits
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Aug 19 17:34:50 UTC 2021
On Wed, Aug 18, 2021 at 09:10:40PM +0300, Jani Nikula wrote:
> The MST code uses actual link rates in the limits struct, while the DP
> code in general uses indexes to the ->common_rates[] array. Fix the
> confusion by using actual link rate values everywhere. This is a better
> abstraction than some obscure index.
>
> Rename the struct members while at it to ensure all the places are
> covered.
>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 30 ++++++++++++---------
> drivers/gpu/drm/i915/display/intel_dp.h | 2 +-
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 6 ++---
> 3 files changed, 21 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 75d4ebc66941..d273b3848785 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -1044,7 +1044,8 @@ intel_dp_adjust_compliance_config(struct intel_dp *intel_dp,
> intel_dp->num_common_rates,
> intel_dp->compliance.test_link_rate);
> if (index >= 0)
> - limits->min_clock = limits->max_clock = index;
> + limits->min_rate = limits->max_rate =
> + intel_dp->compliance.test_link_rate;
> limits->min_lane_count = limits->max_lane_count =
> intel_dp->compliance.test_lane_count;
> }
> @@ -1058,8 +1059,8 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
> const struct link_config_limits *limits)
> {
> struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
> - int bpp, clock, lane_count;
> - int mode_rate, link_clock, link_avail;
> + int bpp, i, lane_count;
> + int mode_rate, link_rate, link_avail;
>
> for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) {
> int output_bpp = intel_dp_output_bpp(pipe_config->output_format, bpp);
> @@ -1067,18 +1068,22 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
> mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
> output_bpp);
>
> - for (clock = limits->min_clock; clock <= limits->max_clock; clock++) {
> + for (i = 0; i < intel_dp->num_common_rates; i++) {
> + link_rate = intel_dp->common_rates[i];
> + if (link_rate < limits->min_rate ||
> + link_rate > limits->max_rate)
> + continue;
> +
> for (lane_count = limits->min_lane_count;
> lane_count <= limits->max_lane_count;
> lane_count <<= 1) {
> - link_clock = intel_dp->common_rates[clock];
> - link_avail = intel_dp_max_data_rate(link_clock,
> + link_avail = intel_dp_max_data_rate(link_rate,
> lane_count);
>
> if (mode_rate <= link_avail) {
> pipe_config->lane_count = lane_count;
> pipe_config->pipe_bpp = bpp;
> - pipe_config->port_clock = link_clock;
> + pipe_config->port_clock = link_rate;
>
> return 0;
> }
> @@ -1212,7 +1217,7 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> * with DSC enabled for the requested mode.
> */
> pipe_config->pipe_bpp = pipe_bpp;
> - pipe_config->port_clock = intel_dp->common_rates[limits->max_clock];
> + pipe_config->port_clock = limits->max_rate;
> pipe_config->lane_count = limits->max_lane_count;
>
> if (intel_dp_is_edp(intel_dp)) {
> @@ -1321,8 +1326,8 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
> /* No common link rates between source and sink */
> drm_WARN_ON(encoder->base.dev, common_len <= 0);
>
> - limits.min_clock = 0;
> - limits.max_clock = common_len - 1;
> + limits.min_rate = intel_dp->common_rates[0];
> + limits.max_rate = intel_dp->common_rates[common_len - 1];
>
> limits.min_lane_count = 1;
> limits.max_lane_count = intel_dp_max_lane_count(intel_dp);
> @@ -1340,15 +1345,14 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
> * values correspond to the native resolution of the panel.
> */
> limits.min_lane_count = limits.max_lane_count;
> - limits.min_clock = limits.max_clock;
> + limits.min_rate = limits.max_rate;
> }
>
> intel_dp_adjust_compliance_config(intel_dp, pipe_config, &limits);
>
> drm_dbg_kms(&i915->drm, "DP link computation with max lane count %i "
> "max rate %d max bpp %d pixel clock %iKHz\n",
> - limits.max_lane_count,
> - intel_dp->common_rates[limits.max_clock],
> + limits.max_lane_count, limits.max_rate,
> limits.max_bpp, adjusted_mode->crtc_clock);
>
> if ((adjusted_mode->crtc_clock > i915->max_dotclk_freq ||
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> index 680631b5b437..1345d588fc6d 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -26,7 +26,7 @@ struct intel_dp;
> struct intel_encoder;
>
> struct link_config_limits {
> - int min_clock, max_clock;
> + int min_rate, max_rate;
> int min_lane_count, max_lane_count;
> int min_bpp, max_bpp;
> };
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index 9859c0334ebc..d104441344c0 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -61,7 +61,7 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
> int bpp, slots = -EINVAL;
>
> crtc_state->lane_count = limits->max_lane_count;
> - crtc_state->port_clock = limits->max_clock;
> + crtc_state->port_clock = limits->max_rate;
>
> for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) {
> crtc_state->pipe_bpp = bpp;
> @@ -131,8 +131,8 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
> * for MST we always configure max link bw - the spec doesn't
> * seem to suggest we should do otherwise.
> */
> - limits.min_clock =
> - limits.max_clock = intel_dp_max_link_rate(intel_dp);
> + limits.min_rate =
> + limits.max_rate = intel_dp_max_link_rate(intel_dp);
>
> limits.min_lane_count =
> limits.max_lane_count = intel_dp_max_lane_count(intel_dp);
> --
> 2.20.1
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list