[Intel-gfx] [PATCH v2 2/8] drm/i915/display: Move DRRS code its own file
Souza, Jose
jose.souza at intel.com
Wed Aug 25 17:23:35 UTC 2021
On Wed, 2021-08-25 at 11:55 -0400, Rodrigo Vivi wrote:
> On Tue, Aug 24, 2021 at 05:58:34PM -0700, José Roberto de Souza wrote:
> > intel_dp.c is a 5k lines monster, so moving DRRS out of it to reduce
> > some lines from it.
> >
> > Cc: Jani Nikula <jani.nikula at intel.com>
> > Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> > ---
> > Documentation/gpu/i915.rst | 14 +-
> > drivers/gpu/drm/i915/Makefile | 1 +
> > drivers/gpu/drm/i915/display/intel_ddi.c | 1 +
> > .../drm/i915/display/intel_display_debugfs.c | 1 +
> > drivers/gpu/drm/i915/display/intel_dp.c | 467 +----------------
> > drivers/gpu/drm/i915/display/intel_dp.h | 11 -
> > drivers/gpu/drm/i915/display/intel_drrs.c | 477 ++++++++++++++++++
> > drivers/gpu/drm/i915/display/intel_drrs.h | 32 ++
> > .../gpu/drm/i915/display/intel_frontbuffer.c | 1 +
> > 9 files changed, 521 insertions(+), 484 deletions(-)
> > create mode 100644 drivers/gpu/drm/i915/display/intel_drrs.c
> > create mode 100644 drivers/gpu/drm/i915/display/intel_drrs.h
> >
> > diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst
> > index 204ebdaadb45a..03021dfa0dd81 100644
> > --- a/Documentation/gpu/i915.rst
> > +++ b/Documentation/gpu/i915.rst
> > @@ -183,25 +183,25 @@ Frame Buffer Compression (FBC)
> > Display Refresh Rate Switching (DRRS)
> > -------------------------------------
> >
> > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > :doc: Display Refresh Rate Switching (DRRS)
> >
> > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > :functions: intel_dp_set_drrs_state
> >
> > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > :functions: intel_edp_drrs_enable
> >
> > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > :functions: intel_edp_drrs_disable
> >
> > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > :functions: intel_edp_drrs_invalidate
> >
> > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > :functions: intel_edp_drrs_flush
> >
> > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > :functions: intel_dp_drrs_init
> >
> > DPIO
> > diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> > index fd997dfa5e32c..ee502a2354c44 100644
> > --- a/drivers/gpu/drm/i915/Makefile
> > +++ b/drivers/gpu/drm/i915/Makefile
> > @@ -213,6 +213,7 @@ i915-y += \
> > display/intel_dpll.o \
> > display/intel_dpll_mgr.o \
> > display/intel_dpt.o \
> > + display/intel_drrs.o \
> > display/intel_dsb.o \
> > display/intel_fb.o \
> > display/intel_fbc.o \
> > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> > index 1ef7a65feb660..828df570a4809 100644
> > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > @@ -40,6 +40,7 @@
> > #include "intel_dp_link_training.h"
> > #include "intel_dp_mst.h"
> > #include "intel_dpio_phy.h"
> > +#include "intel_drrs.h"
> > #include "intel_dsi.h"
> > #include "intel_fdi.h"
> > #include "intel_fifo_underrun.h"
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > index 8fdacb252bb19..b136a0fc0963b 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > @@ -13,6 +13,7 @@
> > #include "intel_display_types.h"
> > #include "intel_dmc.h"
> > #include "intel_dp.h"
> > +#include "intel_drrs.h"
> > #include "intel_fbc.h"
> > #include "intel_hdcp.h"
> > #include "intel_hdmi.h"
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index fd4f7e82e4205..965b888e0e771 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -55,6 +55,7 @@
> > #include "intel_dp_mst.h"
> > #include "intel_dpio_phy.h"
> > #include "intel_dpll.h"
> > +#include "intel_drrs.h"
> > #include "intel_fifo_underrun.h"
> > #include "intel_hdcp.h"
> > #include "intel_hdmi.h"
> > @@ -1675,46 +1676,6 @@ intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp,
> > intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA);
> > }
> >
> > -static void
> > -intel_dp_drrs_compute_config(struct intel_dp *intel_dp,
> > - struct intel_crtc_state *pipe_config,
> > - int output_bpp, bool constant_n)
> > -{
> > - struct intel_connector *intel_connector = intel_dp->attached_connector;
> > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > - int pixel_clock;
> > -
> > - if (pipe_config->vrr.enable)
> > - return;
> > -
> > - /*
> > - * DRRS and PSR can't be enable together, so giving preference to PSR
> > - * as it allows more power-savings by complete shutting down display,
> > - * so to guarantee this, intel_dp_drrs_compute_config() must be called
> > - * after intel_psr_compute_config().
> > - */
> > - if (pipe_config->has_psr)
> > - return;
> > -
> > - if (!intel_connector->panel.downclock_mode ||
> > - dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
> > - return;
> > -
> > - pipe_config->has_drrs = true;
> > -
> > - pixel_clock = intel_connector->panel.downclock_mode->clock;
> > - if (pipe_config->splitter.enable)
> > - pixel_clock /= pipe_config->splitter.link_count;
> > -
> > - intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock,
> > - pipe_config->port_clock, &pipe_config->dp_m2_n2,
> > - constant_n, pipe_config->fec_enable);
> > -
> > - /* FIXME: abstract this better */
> > - if (pipe_config->splitter.enable)
> > - pipe_config->dp_m2_n2.gmch_m *= pipe_config->splitter.link_count;
> > -}
> > -
> > int
> > intel_dp_compute_config(struct intel_encoder *encoder,
> > struct intel_crtc_state *pipe_config,
> > @@ -4785,432 +4746,6 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
> > drm_connector_attach_vrr_capable_property(connector);
> > }
> >
> > -/**
> > - * intel_dp_set_drrs_state - program registers for RR switch to take effect
> > - * @dev_priv: i915 device
> > - * @crtc_state: a pointer to the active intel_crtc_state
> > - * @refresh_rate: RR to be programmed
>
> I know it was already here...
>
> > - *
> > - * This function gets called when refresh rate (RR) has to be changed from
> > - * one frequency to another. Switches can be between high and low RR
> > - * supported by the panel or to any other RR based on media playback (in
> > - * this case, RR value needs to be passed from user space).
> > - *
> > - * The caller of this function needs to take a lock on dev_priv->drrs.
> > - */
> > -static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv,
> > - const struct intel_crtc_state *crtc_state,
> > - int refresh_rate)
> > -{
> > - struct intel_dp *intel_dp = dev_priv->drrs.dp;
> > - struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > - enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
> > -
> > - if (refresh_rate <= 0) {
> > - drm_dbg_kms(&dev_priv->drm,
> > - "Refresh rate should be positive non-zero.\n");
> > - return;
> > - }
> > -
> > - if (intel_dp == NULL) {
> > - drm_dbg_kms(&dev_priv->drm, "DRRS not supported.\n");
> > - return;
> > - }
> > -
> > - if (!crtc) {
> > - drm_dbg_kms(&dev_priv->drm,
> > - "DRRS: intel_crtc not initialized\n");
> > - return;
> > - }
> > -
> > - if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) {
> > - drm_dbg_kms(&dev_priv->drm, "Only Seamless DRRS supported.\n");
> > - return;
> > - }
> > -
> > - if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) ==
> > - refresh_rate)
> > - index = DRRS_LOW_RR;
> > -
> > - if (index == dev_priv->drrs.refresh_rate_type) {
> > - drm_dbg_kms(&dev_priv->drm,
> > - "DRRS requested for previously set RR...ignoring\n");
> > - return;
> > - }
> > -
> > - if (!crtc_state->hw.active) {
> > - drm_dbg_kms(&dev_priv->drm,
> > - "eDP encoder disabled. CRTC not Active\n");
> > - return;
> > - }
> > -
> > - if (DISPLAY_VER(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) {
> > - switch (index) {
> > - case DRRS_HIGH_RR:
> > - intel_dp_set_m_n(crtc_state, M1_N1);
> > - break;
> > - case DRRS_LOW_RR:
> > - intel_dp_set_m_n(crtc_state, M2_N2);
> > - break;
> > - case DRRS_MAX_RR:
> > - default:
> > - drm_err(&dev_priv->drm,
> > - "Unsupported refreshrate type\n");
> > - }
> > - } else if (DISPLAY_VER(dev_priv) > 6) {
> > - i915_reg_t reg = PIPECONF(crtc_state->cpu_transcoder);
> > - u32 val;
> > -
> > - val = intel_de_read(dev_priv, reg);
> > - if (index > DRRS_HIGH_RR) {
> > - if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > - val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV;
> > - else
> > - val |= PIPECONF_EDP_RR_MODE_SWITCH;
> > - } else {
> > - if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > - val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV;
> > - else
> > - val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
> > - }
> > - intel_de_write(dev_priv, reg, val);
> > - }
> > -
> > - dev_priv->drrs.refresh_rate_type = index;
> > -
> > - drm_dbg_kms(&dev_priv->drm, "eDP Refresh Rate set to : %dHz\n",
> > - refresh_rate);
> > -}
> > -
> > -static void
> > -intel_edp_drrs_enable_locked(struct intel_dp *intel_dp)
> > -{
> > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > -
> > - dev_priv->drrs.busy_frontbuffer_bits = 0;
> > - dev_priv->drrs.dp = intel_dp;
> > -}
> > -
> > -/**
> > - * intel_edp_drrs_enable - init drrs struct if supported
> > - * @intel_dp: DP struct
> > - * @crtc_state: A pointer to the active crtc state.
> > - *
> > - * Initializes frontbuffer_bits and drrs.dp
> > - */
> > -void intel_edp_drrs_enable(struct intel_dp *intel_dp,
> > - const struct intel_crtc_state *crtc_state)
> > -{
> > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > -
> > - if (!crtc_state->has_drrs)
> > - return;
> > -
> > - drm_dbg_kms(&dev_priv->drm, "Enabling DRRS\n");
> > -
> > - mutex_lock(&dev_priv->drrs.mutex);
> > -
> > - if (dev_priv->drrs.dp) {
> > - drm_warn(&dev_priv->drm, "DRRS already enabled\n");
> > - goto unlock;
> > - }
> > -
> > - intel_edp_drrs_enable_locked(intel_dp);
> > -
> > -unlock:
> > - mutex_unlock(&dev_priv->drrs.mutex);
> > -}
> > -
> > -static void
> > -intel_edp_drrs_disable_locked(struct intel_dp *intel_dp,
> > - const struct intel_crtc_state *crtc_state)
> > -{
> > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > -
> > - if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) {
> > - int refresh;
> > -
> > - refresh = drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode);
> > - intel_dp_set_drrs_state(dev_priv, crtc_state, refresh);
> > - }
> > -
> > - dev_priv->drrs.dp = NULL;
> > -}
> > -
> > -/**
> > - * intel_edp_drrs_disable - Disable DRRS
> > - * @intel_dp: DP struct
> > - * @old_crtc_state: Pointer to old crtc_state.
> > - *
> > - */
> > -void intel_edp_drrs_disable(struct intel_dp *intel_dp,
> > - const struct intel_crtc_state *old_crtc_state)
> > -{
> > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > -
> > - if (!old_crtc_state->has_drrs)
> > - return;
> > -
> > - mutex_lock(&dev_priv->drrs.mutex);
> > - if (!dev_priv->drrs.dp) {
> > - mutex_unlock(&dev_priv->drrs.mutex);
> > - return;
> > - }
> > -
> > - intel_edp_drrs_disable_locked(intel_dp, old_crtc_state);
> > - mutex_unlock(&dev_priv->drrs.mutex);
> > -
> > - cancel_delayed_work_sync(&dev_priv->drrs.work);
> > -}
> > -
> > -/**
> > - * intel_edp_drrs_update - Update DRRS state
> > - * @intel_dp: Intel DP
> > - * @crtc_state: new CRTC state
> > - *
> > - * This function will update DRRS states, disabling or enabling DRRS when
> > - * executing fastsets. For full modeset, intel_edp_drrs_disable() and
> > - * intel_edp_drrs_enable() should be called instead.
> > - */
> > -void
> > -intel_edp_drrs_update(struct intel_dp *intel_dp,
> > - const struct intel_crtc_state *crtc_state)
> > -{
> > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > -
> > - if (dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
> > - return;
> > -
> > - mutex_lock(&dev_priv->drrs.mutex);
> > -
> > - /* New state matches current one? */
> > - if (crtc_state->has_drrs == !!dev_priv->drrs.dp)
> > - goto unlock;
> > -
> > - if (crtc_state->has_drrs)
> > - intel_edp_drrs_enable_locked(intel_dp);
> > - else
> > - intel_edp_drrs_disable_locked(intel_dp, crtc_state);
> > -
> > -unlock:
> > - mutex_unlock(&dev_priv->drrs.mutex);
> > -}
> > -
> > -static void intel_edp_drrs_downclock_work(struct work_struct *work)
> > -{
> > - struct drm_i915_private *dev_priv =
> > - container_of(work, typeof(*dev_priv), drrs.work.work);
> > - struct intel_dp *intel_dp;
> > -
> > - mutex_lock(&dev_priv->drrs.mutex);
> > -
> > - intel_dp = dev_priv->drrs.dp;
> > -
> > - if (!intel_dp)
> > - goto unlock;
> > -
> > - /*
> > - * The delayed work can race with an invalidate hence we need to
> > - * recheck.
> > - */
> > -
> > - if (dev_priv->drrs.busy_frontbuffer_bits)
> > - goto unlock;
> > -
> > - if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) {
> > - struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > -
> > - intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > - drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode));
> > - }
> > -
> > -unlock:
> > - mutex_unlock(&dev_priv->drrs.mutex);
> > -}
> > -
> > -/**
> > - * intel_edp_drrs_invalidate - Disable Idleness DRRS
> > - * @dev_priv: i915 device
> > - * @frontbuffer_bits: frontbuffer plane tracking bits
> > - *
> > - * This function gets called everytime rendering on the given planes start.
> > - * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR).
> > - *
> > - * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
> > - */
> > -void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
> > - unsigned int frontbuffer_bits)
> > -{
> > - struct intel_dp *intel_dp;
> > - struct drm_crtc *crtc;
> > - enum pipe pipe;
> > -
> > - if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
> > - return;
> > -
> > - cancel_delayed_work(&dev_priv->drrs.work);
> > -
> > - mutex_lock(&dev_priv->drrs.mutex);
> > -
> > - intel_dp = dev_priv->drrs.dp;
> > - if (!intel_dp) {
> > - mutex_unlock(&dev_priv->drrs.mutex);
> > - return;
> > - }
> > -
> > - crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > - pipe = to_intel_crtc(crtc)->pipe;
> > -
> > - frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
> > - dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
> > -
> > - /* invalidate means busy screen hence upclock */
> > - if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
> > - intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > - drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
> > -
> > - mutex_unlock(&dev_priv->drrs.mutex);
> > -}
> > -
> > -/**
> > - * intel_edp_drrs_flush - Restart Idleness DRRS
> > - * @dev_priv: i915 device
> > - * @frontbuffer_bits: frontbuffer plane tracking bits
> > - *
> > - * This function gets called every time rendering on the given planes has
> > - * completed or flip on a crtc is completed. So DRRS should be upclocked
> > - * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again,
> > - * if no other planes are dirty.
> > - *
> > - * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
> > - */
> > -void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
> > - unsigned int frontbuffer_bits)
> > -{
> > - struct intel_dp *intel_dp;
> > - struct drm_crtc *crtc;
> > - enum pipe pipe;
> > -
> > - if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
> > - return;
> > -
> > - cancel_delayed_work(&dev_priv->drrs.work);
> > -
> > - mutex_lock(&dev_priv->drrs.mutex);
> > -
> > - intel_dp = dev_priv->drrs.dp;
> > - if (!intel_dp) {
> > - mutex_unlock(&dev_priv->drrs.mutex);
> > - return;
> > - }
> > -
> > - crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > - pipe = to_intel_crtc(crtc)->pipe;
> > -
> > - frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
> > - dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
> > -
> > - /* flush means busy screen hence upclock */
> > - if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
> > - intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > - drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
> > -
> > - /*
> > - * flush also means no more activity hence schedule downclock, if all
> > - * other fbs are quiescent too
> > - */
> > - if (!dev_priv->drrs.busy_frontbuffer_bits)
> > - schedule_delayed_work(&dev_priv->drrs.work,
> > - msecs_to_jiffies(1000));
> > - mutex_unlock(&dev_priv->drrs.mutex);
> > -}
> > -
> > -/**
> > - * DOC: Display Refresh Rate Switching (DRRS)
> > - *
> > - * Display Refresh Rate Switching (DRRS) is a power conservation feature
> > - * which enables swtching between low and high refresh rates,
> > - * dynamically, based on the usage scenario. This feature is applicable
> > - * for internal panels.
> > - *
> > - * Indication that the panel supports DRRS is given by the panel EDID, which
> > - * would list multiple refresh rates for one resolution.
> > - *
> > - * DRRS is of 2 types - static and seamless.
> > - * Static DRRS involves changing refresh rate (RR) by doing a full modeset
> > - * (may appear as a blink on screen) and is used in dock-undock scenario.
> > - * Seamless DRRS involves changing RR without any visual effect to the user
> > - * and can be used during normal system usage. This is done by programming
> > - * certain registers.
> > - *
> > - * Support for static/seamless DRRS may be indicated in the VBT based on
> > - * inputs from the panel spec.
> > - *
> > - * DRRS saves power by switching to low RR based on usage scenarios.
> > - *
> > - * The implementation is based on frontbuffer tracking implementation. When
> > - * there is a disturbance on the screen triggered by user activity or a periodic
> > - * system activity, DRRS is disabled (RR is changed to high RR). When there is
> > - * no movement on screen, after a timeout of 1 second, a switch to low RR is
> > - * made.
> > - *
> > - * For integration with frontbuffer tracking code, intel_edp_drrs_invalidate()
> > - * and intel_edp_drrs_flush() are called.
> > - *
> > - * DRRS can be further extended to support other internal panels and also
> > - * the scenario of video playback wherein RR is set based on the rate
> > - * requested by userspace.
> > - */
> > -
> > -/**
> > - * intel_dp_drrs_init - Init basic DRRS work and mutex.
> > - * @connector: eDP connector
> > - * @fixed_mode: preferred mode of panel
> > - *
> > - * This function is called only once at driver load to initialize basic
> > - * DRRS stuff.
> > - *
> > - * Returns:
> > - * Downclock mode if panel supports it, else return NULL.
> > - * DRRS support is determined by the presence of downclock mode (apart
> > - * from VBT setting).
> > - */
> > -static struct drm_display_mode *
> > -intel_dp_drrs_init(struct intel_connector *connector,
> > - struct drm_display_mode *fixed_mode)
> > -{
> > - struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > - struct drm_display_mode *downclock_mode = NULL;
> > -
> > - INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work);
> > - mutex_init(&dev_priv->drrs.mutex);
> > -
> > - if (DISPLAY_VER(dev_priv) <= 6) {
> > - drm_dbg_kms(&dev_priv->drm,
> > - "DRRS supported for Gen7 and above\n");
> > - return NULL;
> > - }
> > -
> > - if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
> > - drm_dbg_kms(&dev_priv->drm, "VBT doesn't support DRRS\n");
> > - return NULL;
> > - }
> > -
> > - downclock_mode = intel_panel_edid_downclock_mode(connector, fixed_mode);
> > - if (!downclock_mode) {
> > - drm_dbg_kms(&dev_priv->drm,
> > - "Downclock mode is not found. DRRS not supported\n");
> > - return NULL;
> > - }
> > -
> > - dev_priv->drrs.type = dev_priv->vbt.drrs_type;
> > -
> > - dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR;
> > - drm_dbg_kms(&dev_priv->drm,
> > - "seamless DRRS supported for eDP panel.\n");
> > - return downclock_mode;
> > -}
> > -
> > static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> > struct intel_connector *intel_connector)
> > {
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> > index ae0f776bffab8..a28fff286c21a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.h
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> > @@ -70,17 +70,6 @@ int intel_dp_max_link_rate(struct intel_dp *intel_dp);
> > int intel_dp_max_lane_count(struct intel_dp *intel_dp);
> > int intel_dp_rate_select(struct intel_dp *intel_dp, int rate);
> >
> > -void intel_edp_drrs_enable(struct intel_dp *intel_dp,
> > - const struct intel_crtc_state *crtc_state);
> > -void intel_edp_drrs_disable(struct intel_dp *intel_dp,
> > - const struct intel_crtc_state *crtc_state);
> > -void intel_edp_drrs_update(struct intel_dp *intel_dp,
> > - const struct intel_crtc_state *crtc_state);
> > -void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
> > - unsigned int frontbuffer_bits);
> > -void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
> > - unsigned int frontbuffer_bits);
> > -
> > void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,
> > u8 *link_bw, u8 *rate_select);
> > bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);
> > diff --git a/drivers/gpu/drm/i915/display/intel_drrs.c b/drivers/gpu/drm/i915/display/intel_drrs.c
> > new file mode 100644
> > index 0000000000000..be9b6d4482f04
> > --- /dev/null
> > +++ b/drivers/gpu/drm/i915/display/intel_drrs.c
> > @@ -0,0 +1,477 @@
> > +// SPDX-License-Identifier: MIT
> > +/*
> > + * Copyright © 2021 Intel Corporation
> > + */
> > +
> > +#include "i915_drv.h"
> > +#include "intel_atomic.h"
> > +#include "intel_de.h"
> > +#include "intel_display_types.h"
> > +#include "intel_drrs.h"
> > +#include "intel_panel.h"
> > +
> > +/**
> > + * DOC: Display Refresh Rate Switching (DRRS)
> > + *
> > + * Display Refresh Rate Switching (DRRS) is a power conservation feature
> > + * which enables swtching between low and high refresh rates,
> > + * dynamically, based on the usage scenario. This feature is applicable
> > + * for internal panels.
> > + *
> > + * Indication that the panel supports DRRS is given by the panel EDID, which
> > + * would list multiple refresh rates for one resolution.
> > + *
> > + * DRRS is of 2 types - static and seamless.
> > + * Static DRRS involves changing refresh rate (RR) by doing a full modeset
> > + * (may appear as a blink on screen) and is used in dock-undock scenario.
> > + * Seamless DRRS involves changing RR without any visual effect to the user
> > + * and can be used during normal system usage. This is done by programming
> > + * certain registers.
> > + *
> > + * Support for static/seamless DRRS may be indicated in the VBT based on
> > + * inputs from the panel spec.
> > + *
> > + * DRRS saves power by switching to low RR based on usage scenarios.
> > + *
> > + * The implementation is based on frontbuffer tracking implementation. When
> > + * there is a disturbance on the screen triggered by user activity or a periodic
> > + * system activity, DRRS is disabled (RR is changed to high RR). When there is
> > + * no movement on screen, after a timeout of 1 second, a switch to low RR is
> > + * made.
> > + *
> > + * For integration with frontbuffer tracking code, intel_edp_drrs_invalidate()
> > + * and intel_edp_drrs_flush() are called.
> > + *
> > + * DRRS can be further extended to support other internal panels and also
> > + * the scenario of video playback wherein RR is set based on the rate
> > + * requested by userspace.
> > + */
> > +
> > +void
> > +intel_dp_drrs_compute_config(struct intel_dp *intel_dp,
> > + struct intel_crtc_state *pipe_config,
> > + int output_bpp, bool constant_n)
> > +{
> > + struct intel_connector *intel_connector = intel_dp->attached_connector;
> > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > + int pixel_clock;
> > +
> > + if (pipe_config->vrr.enable)
> > + return;
> > +
> > + /*
> > + * DRRS and PSR can't be enable together, so giving preference to PSR
> > + * as it allows more power-savings by complete shutting down display,
> > + * so to guarantee this, intel_dp_drrs_compute_config() must be called
> > + * after intel_psr_compute_config().
> > + */
> > + if (pipe_config->has_psr)
> > + return;
> > +
> > + if (!intel_connector->panel.downclock_mode ||
> > + dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
> > + return;
> > +
> > + pipe_config->has_drrs = true;
> > +
> > + pixel_clock = intel_connector->panel.downclock_mode->clock;
> > + if (pipe_config->splitter.enable)
> > + pixel_clock /= pipe_config->splitter.link_count;
> > +
> > + intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock,
> > + pipe_config->port_clock, &pipe_config->dp_m2_n2,
> > + constant_n, pipe_config->fec_enable);
> > +
> > + /* FIXME: abstract this better */
> > + if (pipe_config->splitter.enable)
> > + pipe_config->dp_m2_n2.gmch_m *= pipe_config->splitter.link_count;
> > +}
> > +
> > +/**
> > + * intel_dp_set_drrs_state - program registers for RR switch to take effect
> > + * @dev_priv: i915 device
> > + * @crtc_state: a pointer to the active intel_crtc_state
> > + * @refresh_rate: RR to be programmed
>
> ... but let's enjoy the opportunity and avoid doc style in static functions
> that should never be called outside this block.
Did that in the next patch, while renaming functions.
Is that fine? Or it should be removed in this one?
thanks for the reviews
>
> with this addressed feel free to use:
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
>
> > + *
> > + * This function gets called when refresh rate (RR) has to be changed from
> > + * one frequency to another. Switches can be between high and low RR
> > + * supported by the panel or to any other RR based on media playback (in
> > + * this case, RR value needs to be passed from user space).
> > + *
> > + * The caller of this function needs to take a lock on dev_priv->drrs.
> > + */
> > +static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv,
> > + const struct intel_crtc_state *crtc_state,
> > + int refresh_rate)
> > +{
> > + struct intel_dp *intel_dp = dev_priv->drrs.dp;
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > + enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
> > +
> > + if (refresh_rate <= 0) {
> > + drm_dbg_kms(&dev_priv->drm,
> > + "Refresh rate should be positive non-zero.\n");
> > + return;
> > + }
> > +
> > + if (intel_dp == NULL) {
> > + drm_dbg_kms(&dev_priv->drm, "DRRS not supported.\n");
> > + return;
> > + }
> > +
> > + if (!crtc) {
> > + drm_dbg_kms(&dev_priv->drm,
> > + "DRRS: intel_crtc not initialized\n");
> > + return;
> > + }
> > +
> > + if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) {
> > + drm_dbg_kms(&dev_priv->drm, "Only Seamless DRRS supported.\n");
> > + return;
> > + }
> > +
> > + if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) ==
> > + refresh_rate)
> > + index = DRRS_LOW_RR;
> > +
> > + if (index == dev_priv->drrs.refresh_rate_type) {
> > + drm_dbg_kms(&dev_priv->drm,
> > + "DRRS requested for previously set RR...ignoring\n");
> > + return;
> > + }
> > +
> > + if (!crtc_state->hw.active) {
> > + drm_dbg_kms(&dev_priv->drm,
> > + "eDP encoder disabled. CRTC not Active\n");
> > + return;
> > + }
> > +
> > + if (DISPLAY_VER(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) {
> > + switch (index) {
> > + case DRRS_HIGH_RR:
> > + intel_dp_set_m_n(crtc_state, M1_N1);
> > + break;
> > + case DRRS_LOW_RR:
> > + intel_dp_set_m_n(crtc_state, M2_N2);
> > + break;
> > + case DRRS_MAX_RR:
> > + default:
> > + drm_err(&dev_priv->drm,
> > + "Unsupported refreshrate type\n");
> > + }
> > + } else if (DISPLAY_VER(dev_priv) > 6) {
> > + i915_reg_t reg = PIPECONF(crtc_state->cpu_transcoder);
> > + u32 val;
> > +
> > + val = intel_de_read(dev_priv, reg);
> > + if (index > DRRS_HIGH_RR) {
> > + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > + val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV;
> > + else
> > + val |= PIPECONF_EDP_RR_MODE_SWITCH;
> > + } else {
> > + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > + val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV;
> > + else
> > + val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
> > + }
> > + intel_de_write(dev_priv, reg, val);
> > + }
> > +
> > + dev_priv->drrs.refresh_rate_type = index;
> > +
> > + drm_dbg_kms(&dev_priv->drm, "eDP Refresh Rate set to : %dHz\n",
> > + refresh_rate);
> > +}
> > +
> > +static void
> > +intel_edp_drrs_enable_locked(struct intel_dp *intel_dp)
> > +{
> > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > +
> > + dev_priv->drrs.busy_frontbuffer_bits = 0;
> > + dev_priv->drrs.dp = intel_dp;
> > +}
> > +
> > +/**
> > + * intel_edp_drrs_enable - init drrs struct if supported
> > + * @intel_dp: DP struct
> > + * @crtc_state: A pointer to the active crtc state.
> > + *
> > + * Initializes frontbuffer_bits and drrs.dp
> > + */
> > +void intel_edp_drrs_enable(struct intel_dp *intel_dp,
> > + const struct intel_crtc_state *crtc_state)
> > +{
> > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > +
> > + if (!crtc_state->has_drrs)
> > + return;
> > +
> > + drm_dbg_kms(&dev_priv->drm, "Enabling DRRS\n");
> > +
> > + mutex_lock(&dev_priv->drrs.mutex);
> > +
> > + if (dev_priv->drrs.dp) {
> > + drm_warn(&dev_priv->drm, "DRRS already enabled\n");
> > + goto unlock;
> > + }
> > +
> > + intel_edp_drrs_enable_locked(intel_dp);
> > +
> > +unlock:
> > + mutex_unlock(&dev_priv->drrs.mutex);
> > +}
> > +
> > +static void
> > +intel_edp_drrs_disable_locked(struct intel_dp *intel_dp,
> > + const struct intel_crtc_state *crtc_state)
> > +{
> > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > +
> > + if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) {
> > + int refresh;
> > +
> > + refresh = drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode);
> > + intel_dp_set_drrs_state(dev_priv, crtc_state, refresh);
> > + }
> > +
> > + dev_priv->drrs.dp = NULL;
> > +}
> > +
> > +/**
> > + * intel_edp_drrs_disable - Disable DRRS
> > + * @intel_dp: DP struct
> > + * @old_crtc_state: Pointer to old crtc_state.
> > + *
> > + */
> > +void intel_edp_drrs_disable(struct intel_dp *intel_dp,
> > + const struct intel_crtc_state *old_crtc_state)
> > +{
> > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > +
> > + if (!old_crtc_state->has_drrs)
> > + return;
> > +
> > + mutex_lock(&dev_priv->drrs.mutex);
> > + if (!dev_priv->drrs.dp) {
> > + mutex_unlock(&dev_priv->drrs.mutex);
> > + return;
> > + }
> > +
> > + intel_edp_drrs_disable_locked(intel_dp, old_crtc_state);
> > + mutex_unlock(&dev_priv->drrs.mutex);
> > +
> > + cancel_delayed_work_sync(&dev_priv->drrs.work);
> > +}
> > +
> > +/**
> > + * intel_edp_drrs_update - Update DRRS state
> > + * @intel_dp: Intel DP
> > + * @crtc_state: new CRTC state
> > + *
> > + * This function will update DRRS states, disabling or enabling DRRS when
> > + * executing fastsets. For full modeset, intel_edp_drrs_disable() and
> > + * intel_edp_drrs_enable() should be called instead.
> > + */
> > +void
> > +intel_edp_drrs_update(struct intel_dp *intel_dp,
> > + const struct intel_crtc_state *crtc_state)
> > +{
> > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > +
> > + if (dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
> > + return;
> > +
> > + mutex_lock(&dev_priv->drrs.mutex);
> > +
> > + /* New state matches current one? */
> > + if (crtc_state->has_drrs == !!dev_priv->drrs.dp)
> > + goto unlock;
> > +
> > + if (crtc_state->has_drrs)
> > + intel_edp_drrs_enable_locked(intel_dp);
> > + else
> > + intel_edp_drrs_disable_locked(intel_dp, crtc_state);
> > +
> > +unlock:
> > + mutex_unlock(&dev_priv->drrs.mutex);
> > +}
> > +
> > +static void intel_edp_drrs_downclock_work(struct work_struct *work)
> > +{
> > + struct drm_i915_private *dev_priv =
> > + container_of(work, typeof(*dev_priv), drrs.work.work);
> > + struct intel_dp *intel_dp;
> > +
> > + mutex_lock(&dev_priv->drrs.mutex);
> > +
> > + intel_dp = dev_priv->drrs.dp;
> > +
> > + if (!intel_dp)
> > + goto unlock;
> > +
> > + /*
> > + * The delayed work can race with an invalidate hence we need to
> > + * recheck.
> > + */
> > +
> > + if (dev_priv->drrs.busy_frontbuffer_bits)
> > + goto unlock;
> > +
> > + if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) {
> > + struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > +
> > + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > + drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode));
> > + }
> > +
> > +unlock:
> > + mutex_unlock(&dev_priv->drrs.mutex);
> > +}
> > +
> > +/**
> > + * intel_edp_drrs_invalidate - Disable Idleness DRRS
> > + * @dev_priv: i915 device
> > + * @frontbuffer_bits: frontbuffer plane tracking bits
> > + *
> > + * This function gets called everytime rendering on the given planes start.
> > + * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR).
> > + *
> > + * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
> > + */
> > +void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
> > + unsigned int frontbuffer_bits)
> > +{
> > + struct intel_dp *intel_dp;
> > + struct drm_crtc *crtc;
> > + enum pipe pipe;
> > +
> > + if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
> > + return;
> > +
> > + cancel_delayed_work(&dev_priv->drrs.work);
> > +
> > + mutex_lock(&dev_priv->drrs.mutex);
> > +
> > + intel_dp = dev_priv->drrs.dp;
> > + if (!intel_dp) {
> > + mutex_unlock(&dev_priv->drrs.mutex);
> > + return;
> > + }
> > +
> > + crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > + pipe = to_intel_crtc(crtc)->pipe;
> > +
> > + frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
> > + dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
> > +
> > + /* invalidate means busy screen hence upclock */
> > + if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
> > + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
> > +
> > + mutex_unlock(&dev_priv->drrs.mutex);
> > +}
> > +
> > +/**
> > + * intel_edp_drrs_flush - Restart Idleness DRRS
> > + * @dev_priv: i915 device
> > + * @frontbuffer_bits: frontbuffer plane tracking bits
> > + *
> > + * This function gets called every time rendering on the given planes has
> > + * completed or flip on a crtc is completed. So DRRS should be upclocked
> > + * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again,
> > + * if no other planes are dirty.
> > + *
> > + * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
> > + */
> > +void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
> > + unsigned int frontbuffer_bits)
> > +{
> > + struct intel_dp *intel_dp;
> > + struct drm_crtc *crtc;
> > + enum pipe pipe;
> > +
> > + if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
> > + return;
> > +
> > + cancel_delayed_work(&dev_priv->drrs.work);
> > +
> > + mutex_lock(&dev_priv->drrs.mutex);
> > +
> > + intel_dp = dev_priv->drrs.dp;
> > + if (!intel_dp) {
> > + mutex_unlock(&dev_priv->drrs.mutex);
> > + return;
> > + }
> > +
> > + crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > + pipe = to_intel_crtc(crtc)->pipe;
> > +
> > + frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
> > + dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
> > +
> > + /* flush means busy screen hence upclock */
> > + if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
> > + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
> > +
> > + /*
> > + * flush also means no more activity hence schedule downclock, if all
> > + * other fbs are quiescent too
> > + */
> > + if (!dev_priv->drrs.busy_frontbuffer_bits)
> > + schedule_delayed_work(&dev_priv->drrs.work,
> > + msecs_to_jiffies(1000));
> > + mutex_unlock(&dev_priv->drrs.mutex);
> > +}
> > +
> > +/**
> > + * intel_dp_drrs_init - Init basic DRRS work and mutex.
> > + * @connector: eDP connector
> > + * @fixed_mode: preferred mode of panel
> > + *
> > + * This function is called only once at driver load to initialize basic
> > + * DRRS stuff.
> > + *
> > + * Returns:
> > + * Downclock mode if panel supports it, else return NULL.
> > + * DRRS support is determined by the presence of downclock mode (apart
> > + * from VBT setting).
> > + */
> > +struct drm_display_mode *
> > +intel_dp_drrs_init(struct intel_connector *connector,
> > + struct drm_display_mode *fixed_mode)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > + struct drm_display_mode *downclock_mode = NULL;
> > +
> > + INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work);
> > + mutex_init(&dev_priv->drrs.mutex);
> > +
> > + if (DISPLAY_VER(dev_priv) <= 6) {
> > + drm_dbg_kms(&dev_priv->drm,
> > + "DRRS supported for Gen7 and above\n");
> > + return NULL;
> > + }
> > +
> > + if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
> > + drm_dbg_kms(&dev_priv->drm, "VBT doesn't support DRRS\n");
> > + return NULL;
> > + }
> > +
> > + downclock_mode = intel_panel_edid_downclock_mode(connector, fixed_mode);
> > + if (!downclock_mode) {
> > + drm_dbg_kms(&dev_priv->drm,
> > + "Downclock mode is not found. DRRS not supported\n");
> > + return NULL;
> > + }
> > +
> > + dev_priv->drrs.type = dev_priv->vbt.drrs_type;
> > +
> > + dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR;
> > + drm_dbg_kms(&dev_priv->drm,
> > + "seamless DRRS supported for eDP panel.\n");
> > + return downclock_mode;
> > +}
> > diff --git a/drivers/gpu/drm/i915/display/intel_drrs.h b/drivers/gpu/drm/i915/display/intel_drrs.h
> > new file mode 100644
> > index 0000000000000..ffa175b4cf4f4
> > --- /dev/null
> > +++ b/drivers/gpu/drm/i915/display/intel_drrs.h
> > @@ -0,0 +1,32 @@
> > +/* SPDX-License-Identifier: MIT */
> > +/*
> > + * Copyright © 2021 Intel Corporation
> > + */
> > +
> > +#ifndef __INTEL_DRRS_H__
> > +#define __INTEL_DRRS_H__
> > +
> > +#include <linux/types.h>
> > +
> > +struct drm_i915_private;
> > +struct intel_crtc_state;
> > +struct intel_connector;
> > +struct intel_dp;
> > +
> > +void intel_edp_drrs_enable(struct intel_dp *intel_dp,
> > + const struct intel_crtc_state *crtc_state);
> > +void intel_edp_drrs_disable(struct intel_dp *intel_dp,
> > + const struct intel_crtc_state *crtc_state);
> > +void intel_edp_drrs_update(struct intel_dp *intel_dp,
> > + const struct intel_crtc_state *crtc_state);
> > +void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
> > + unsigned int frontbuffer_bits);
> > +void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
> > + unsigned int frontbuffer_bits);
> > +void intel_dp_drrs_compute_config(struct intel_dp *intel_dp,
> > + struct intel_crtc_state *pipe_config,
> > + int output_bpp, bool constant_n);
> > +struct drm_display_mode *intel_dp_drrs_init(struct intel_connector *connector,
> > + struct drm_display_mode *fixed_mode);
> > +
> > +#endif /* __INTEL_DRRS_H__ */
> > diff --git a/drivers/gpu/drm/i915/display/intel_frontbuffer.c b/drivers/gpu/drm/i915/display/intel_frontbuffer.c
> > index 8e75debcce1a9..e4834d84ce5e3 100644
> > --- a/drivers/gpu/drm/i915/display/intel_frontbuffer.c
> > +++ b/drivers/gpu/drm/i915/display/intel_frontbuffer.c
> > @@ -62,6 +62,7 @@
> > #include "intel_display_types.h"
> > #include "intel_fbc.h"
> > #include "intel_frontbuffer.h"
> > +#include "intel_drrs.h"
> > #include "intel_psr.h"
> >
> > /**
> > --
> > 2.33.0
> >
More information about the Intel-gfx
mailing list