[Intel-gfx] [PATCH v2] drm/i915: Handle Intel igfx + Intel dgfx hybrid graphics setup

Tvrtko Ursulin tvrtko.ursulin at linux.intel.com
Tue Aug 31 13:18:15 UTC 2021


On 31/08/2021 13:43, Daniel Vetter wrote:
> On Tue, Aug 31, 2021 at 10:15:03AM +0100, Tvrtko Ursulin wrote:
>>
>> On 30/08/2021 09:26, Daniel Vetter wrote:
>>> On Fri, Aug 27, 2021 at 03:44:42PM +0100, Tvrtko Ursulin wrote:
>>>>
>>>> On 27/08/2021 15:39, Tvrtko Ursulin wrote:
>>>>> From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
>>>>>
>>>>> In short this makes i915 work for hybrid setups (DRI_PRIME=1 with Mesa)
>>>>> when rendering is done on Intel dgfx and scanout/composition on Intel
>>>>> igfx.
>>>>>
>>>>> Before this patch the driver was not quite ready for that setup, mainly
>>>>> because it was able to emit a semaphore wait between the two GPUs, which
>>>>> results in deadlocks because semaphore target location in HWSP is neither
>>>>> shared between the two, nor mapped in both GGTT spaces.
>>>>>
>>>>> To fix it the patch adds an additional check to a couple of relevant code
>>>>> paths in order to prevent using semaphores for inter-engine
>>>>> synchronisation between different driver instances.
>>>>>
>>>>> Patch also moves singly used i915_gem_object_last_write_engine to be
>>>>> private in its only calling unit (debugfs), while modifying it to only
>>>>> show activity belonging to the respective driver instance.
>>>>>
>>>>> What remains in this problem space is the question of the GEM busy ioctl.
>>>>> We have a somewhat ambigous comment there saying only status of native
>>>>> fences will be reported, which could be interpreted as either i915, or
>>>>> native to the drm fd. For now I have decided to leave that as is, meaning
>>>>> any i915 instance activity continues to be reported.
>>>>>
>>>>> v2:
>>>>>     * Avoid adding rq->i915. (Chris)
>>>>>
>>>>> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
>>>
>>> Can't we just delete semaphore code and done?
>>> - GuC won't have it
>>> - media team benchmarked on top of softpin media driver, found no
>>>     difference
>>
>> You have S-curve for saturated workloads or something else? How thorough and
>> which media team I guess.
>>
>>  From memory it was a nice win for some benchmarks (non-saturated ones), but
>> as I have told you previously, we haven't been putting numbers in commit
>> messages since it wasn't allowed. I may be able to dig out some more details
>> if I went trawling through GEM channel IRC logs, although probably not the
>> actual numbers since those were usually on pastebin. Or you go an talk with
>> Chris since he probably remembers more details. Or you just decide you don't
>> care and remove it. I wouldn't do that without putting the complete story in
>> writing, but it's your call after all.
> 
> Media has also changed, they're not using relocations anymore.

Meaning you think it changes the benchmarking story? When coupled with 
removal of GPU relocations then possibly yes.

> Unless there's solid data performance tuning of any kind that gets in the
> way simply needs to be removed. Yes this is radical, but the codebase is
> in a state to require this.
> 
> So either way we'd need to rebenchmark this if it's really required. Also

Therefore can you share what benchmarks have been done or is it secret? 
  As said, I think the non-saturated case was the more interesting one here.

> if we really need this code still someone needs to fix the design, the
> current code is making layering violations an art form.
 >
>> Anyway, without the debugfs churn it is more or less two line patch to fix
>> igfx + dgfx hybrid setup. So while mulling it over this could go in. I'd
>> just refine it to use a GGTT check instead of GT. And unless DG1 ends up
>> being GuC only.
> 
> The minimal robust fix here is imo to stop us from upcasting dma_fence to
> i915_request if it's not for our device. Not sprinkle code here into the
> semaphore code. We shouldn't even get this far with foreign fences.

Device check does not work for multi-tile. It was one of my earlier 
attempts before I realized the problem. You'll see v3 which I think 
handles all the cases.

You also forgot to comment on the question lower in the email. I'll just 
send a patch which removes that anyway so you can comment there.

Regards,

Tvrtko

> -Daniel
> 
>>
>>> - pre-gen8 semaphore code was also silently ditched and no one cared
>>>
>>> Plus removing semaphore code would greatly simplify conversion to
>>> drm/sched.
>>>
>>>>> ---
>>>>>     drivers/gpu/drm/i915/gem/i915_gem_object.h | 17 ----------
>>>>>     drivers/gpu/drm/i915/i915_debugfs.c        | 39 ++++++++++++++++++++--
>>>>>     drivers/gpu/drm/i915/i915_request.c        | 12 ++++++-
>>>>>     3 files changed, 47 insertions(+), 21 deletions(-)
>>>>>
>>>>> diff --git a/drivers/gpu/drm/i915/gem/i915_gem_object.h b/drivers/gpu/drm/i915/gem/i915_gem_object.h
>>>>> index 48112b9d76df..3043fcbd31bd 100644
>>>>> --- a/drivers/gpu/drm/i915/gem/i915_gem_object.h
>>>>> +++ b/drivers/gpu/drm/i915/gem/i915_gem_object.h
>>>>> @@ -503,23 +503,6 @@ i915_gem_object_finish_access(struct drm_i915_gem_object *obj)
>>>>>     	i915_gem_object_unpin_pages(obj);
>>>>>     }
>>>>> -static inline struct intel_engine_cs *
>>>>> -i915_gem_object_last_write_engine(struct drm_i915_gem_object *obj)
>>>>> -{
>>>>> -	struct intel_engine_cs *engine = NULL;
>>>>> -	struct dma_fence *fence;
>>>>> -
>>>>> -	rcu_read_lock();
>>>>> -	fence = dma_resv_get_excl_unlocked(obj->base.resv);
>>>>> -	rcu_read_unlock();
>>>>> -
>>>>> -	if (fence && dma_fence_is_i915(fence) && !dma_fence_is_signaled(fence))
>>>>> -		engine = to_request(fence)->engine;
>>>>> -	dma_fence_put(fence);
>>>>> -
>>>>> -	return engine;
>>>>> -}
>>>>> -
>>>>>     void i915_gem_object_set_cache_coherency(struct drm_i915_gem_object *obj,
>>>>>     					 unsigned int cache_level);
>>>>>     void i915_gem_object_flush_if_display(struct drm_i915_gem_object *obj);
>>>>> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
>>>>> index 04351a851586..55fd6191eb32 100644
>>>>> --- a/drivers/gpu/drm/i915/i915_debugfs.c
>>>>> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
>>>>> @@ -135,13 +135,46 @@ static const char *stringify_vma_type(const struct i915_vma *vma)
>>>>>     	return "ppgtt";
>>>>>     }
>>>>> +static char *
>>>>> +last_write_engine(struct drm_i915_private *i915,
>>>>> +		  struct drm_i915_gem_object *obj)
>>>>> +{
>>>>> +	struct intel_engine_cs *engine;
>>>>> +	struct dma_fence *fence;
>>>>> +	char *res = NULL;
>>>>> +
>>>>> +	rcu_read_lock();
>>>>> +	fence = dma_resv_get_excl_unlocked(obj->base.resv);
>>>>> +	rcu_read_unlock();
>>>>> +
>>>>> +	if (!fence || dma_fence_is_signaled(fence))
>>>>> +		goto out;
>>>>> +
>>>>> +	if (!dma_fence_is_i915(fence)) {
>>>>> +		res = "<external-fence>";
>>>>> +		goto out;
>>>>> +	}
>>>>> +
>>>>> +	engine = to_request(fence)->engine;
>>>>> +	if (engine->gt->i915 != i915) {
>>>>> +		res = "<external-i915>";
>>>>> +		goto out;
>>>>> +	}
>>>>> +
>>>>> +	res = engine->name;
>>>>> +
>>>>> +out:
>>>>> +	dma_fence_put(fence);
>>>>> +	return res;
>>>>> +}
>>>>> +
>>>>>     void
>>>>>     i915_debugfs_describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
>>>>>     {
>>>>>     	struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
>>>>> -	struct intel_engine_cs *engine;
>>>>>     	struct i915_vma *vma;
>>>>>     	int pin_count = 0;
>>>>> +	char *engine;
>>>>>     	seq_printf(m, "%pK: %c%c%c %8zdKiB %02x %02x %s%s%s",
>>>>>     		   &obj->base,
>>>>> @@ -230,9 +263,9 @@ i915_debugfs_describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
>>>>>     	if (i915_gem_object_is_framebuffer(obj))
>>>>>     		seq_printf(m, " (fb)");
>>>>> -	engine = i915_gem_object_last_write_engine(obj);
>>>>> +	engine = last_write_engine(dev_priv, obj);
>>>>>     	if (engine)
>>>>> -		seq_printf(m, " (%s)", engine->name);
>>>>> +		seq_printf(m, " (%s)", engine);
>>>>
>>>> Or I zap this from the code altogether. Not sure it is very useful since the
>>>> only caller is i915_gem_framebuffer debugfs file and how much it can care
>>>> about maybe hitting the timing window when exclusive fence will contain
>>>> something.
>>>
>>> Ideally we'd just look at the fence timeline name. But i915 has this very
>>> convoluted typesafe-by-rcu reuse which means we actually can't do that,
>>> and our fence timeline name is very useless.
>>
>> Why do we even care to output any of this here? I'd just remove it since it
>> is a very transient state with an extremely short window of opportunity to
>> make it show anything. Which I think makes it pretty useless in debugfs.
>>
>> Regards,
>>
>> Tvrtko
>>
>>>
>>> Would be good to fix that, Matt Auld has started an attempt but didn't get
>>> very far.
>>> -Daniel
>>>
>>>>
>>>> Regards,
>>>>
>>>> Tvrtko
>>>>
>>>>>     }
>>>>>     static int i915_gem_object_info(struct seq_file *m, void *data)
>>>>> diff --git a/drivers/gpu/drm/i915/i915_request.c b/drivers/gpu/drm/i915/i915_request.c
>>>>> index ce446716d092..64adf619fe82 100644
>>>>> --- a/drivers/gpu/drm/i915/i915_request.c
>>>>> +++ b/drivers/gpu/drm/i915/i915_request.c
>>>>> @@ -1152,6 +1152,12 @@ __emit_semaphore_wait(struct i915_request *to,
>>>>>     	return 0;
>>>>>     }
>>>>> +static bool
>>>>> +can_use_semaphore_wait(struct i915_request *to, struct i915_request *from)
>>>>> +{
>>>>> +	return to->engine->gt == from->engine->gt;
>>>>> +}
>>>>> +
>>>>>     static int
>>>>>     emit_semaphore_wait(struct i915_request *to,
>>>>>     		    struct i915_request *from,
>>>>> @@ -1160,6 +1166,9 @@ emit_semaphore_wait(struct i915_request *to,
>>>>>     	const intel_engine_mask_t mask = READ_ONCE(from->engine)->mask;
>>>>>     	struct i915_sw_fence *wait = &to->submit;
>>>>> +	if (!can_use_semaphore_wait(to, from))
>>>>> +		goto await_fence;
>>>>> +
>>>>>     	if (!intel_context_use_semaphores(to->context))
>>>>>     		goto await_fence;
>>>>> @@ -1263,7 +1272,8 @@ __i915_request_await_execution(struct i915_request *to,
>>>>>     	 * immediate execution, and so we must wait until it reaches the
>>>>>     	 * active slot.
>>>>>     	 */
>>>>> -	if (intel_engine_has_semaphores(to->engine) &&
>>>>> +	if (can_use_semaphore_wait(to, from) &&
>>>>> +	    intel_engine_has_semaphores(to->engine) &&
>>>>>     	    !i915_request_has_initial_breadcrumb(to)) {
>>>>>     		err = __emit_semaphore_wait(to, from, from->fence.seqno - 1);
>>>>>     		if (err < 0)
>>>>>
>>>
> 


More information about the Intel-gfx mailing list