[Intel-gfx] [PATCH 05/14] drm/i915: Rename PLANE_CUS_CTL Y plane bits

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Rename the PLANE_CUS_CTL Y plane selection bits to actually
say "Y plane".

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 8 ++++----
 drivers/gpu/drm/i915/i915_reg.h              | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index badf035efaeb..726c1552c9bf 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -5159,13 +5159,13 @@ static int icl_check_nv12_planes(struct intel_crtc_state *crtc_state)
 
 		if (icl_is_hdr_plane(dev_priv, plane->id)) {
 			if (linked->id == PLANE_SPRITE5)
-				plane_state->cus_ctl |= PLANE_CUS_PLANE_7;
+				plane_state->cus_ctl |= PLANE_CUS_Y_PLANE_7_ICL;
 			else if (linked->id == PLANE_SPRITE4)
-				plane_state->cus_ctl |= PLANE_CUS_PLANE_6;
+				plane_state->cus_ctl |= PLANE_CUS_Y_PLANE_6_ICL;
 			else if (linked->id == PLANE_SPRITE3)
-				plane_state->cus_ctl |= PLANE_CUS_PLANE_5_RKL;
+				plane_state->cus_ctl |= PLANE_CUS_Y_PLANE_5_RKL;
 			else if (linked->id == PLANE_SPRITE2)
-				plane_state->cus_ctl |= PLANE_CUS_PLANE_4_RKL;
+				plane_state->cus_ctl |= PLANE_CUS_Y_PLANE_4_RKL;
 			else
 				MISSING_CASE(linked->id);
 		}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 6066b1e2763c..4b2bc17d0235 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7328,10 +7328,10 @@ enum {
 #define _PLANE_CUS_CTL_1_A			0x701c8
 #define _PLANE_CUS_CTL_2_A			0x702c8
 #define  PLANE_CUS_ENABLE			(1 << 31)
-#define  PLANE_CUS_PLANE_4_RKL			(0 << 30)
-#define  PLANE_CUS_PLANE_5_RKL			(1 << 30)
-#define  PLANE_CUS_PLANE_6			(0 << 30)
-#define  PLANE_CUS_PLANE_7			(1 << 30)
+#define  PLANE_CUS_Y_PLANE_4_RKL		(0 << 30)
+#define  PLANE_CUS_Y_PLANE_5_RKL		(1 << 30)
+#define  PLANE_CUS_Y_PLANE_6_ICL		(0 << 30)
+#define  PLANE_CUS_Y_PLANE_7_ICL		(1 << 30)
 #define  PLANE_CUS_HPHASE_SIGN_NEGATIVE		(1 << 19)
 #define  PLANE_CUS_HPHASE_0			(0 << 16)
 #define  PLANE_CUS_HPHASE_0_25			(1 << 16)
-- 
2.32.0