[Intel-gfx] [PATCH] drm/i915/display/tgl: Implement Wa_14013120569
Tolakanahalli Pradeep, Madhumitha
madhumitha.tolakanahalli.pradeep at intel.com
Thu Dec 2 01:25:40 UTC 2021
@Jani @Manasi
Bump.
On Mon, 2021-11-08 at 15:52 -0800, Navare, Manasi wrote:
> On Mon, Nov 01, 2021 at 12:25:21PM +0200, Jani Nikula wrote:
> > On Mon, 28 Jun 2021, Madhumitha Tolakanahalli Pradeep
> > <madhumitha.tolakanahalli.pradeep at intel.com> wrote:
> > > PCH display HPD IRQ is not detected with default filter value.
> > > So, PP_CONTROL is manually reprogrammed.
> >
> > Returning to this workaround.
> >
> > You're not supposed to enable the workaround when there's eDP
> > connected. This is also crucial in avoiding issues with eDP PPS.
> >
> > The workaround is specific to Tiger Lake PCH, so you need to check
> > against the PCH, not the GPU.
> >
> > Also see comments inline.
> >
> > >
> > > Signed-off-by: Madhumitha Tolakanahalli Pradeep
> > > <madhumitha.tolakanahalli.pradeep at intel.com>
> > > ---
> > > .../gpu/drm/i915/display/intel_display_power.c | 8 ++++++++
> > > drivers/gpu/drm/i915/display/intel_hotplug.c | 16
> > > ++++++++++++++++
> > > 2 files changed, 24 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c
> > > b/drivers/gpu/drm/i915/display/intel_display_power.c
> > > index 285380079aab..e44323cc76f5 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display_power.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
> > > @@ -6385,8 +6385,16 @@ static void
> > > intel_power_domains_verify_state(struct drm_i915_private *i915)
> > >
> > > void intel_display_power_suspend_late(struct drm_i915_private
> > > *i915)
> > > {
> > > + struct drm_i915_private *dev_priv = i915;
> > > + u32 val;
> > > if (DISPLAY_VER(i915) >= 11 || IS_GEMINILAKE(i915) ||
> > > IS_BROXTON(i915)) {
> > > + val = intel_de_read(dev_priv, PP_CONTROL(0));
> > > + /* Wa_14013120569:tgl */
> > > + if (IS_TIGERLAKE(i915)) {
> > > + val &= ~PANEL_POWER_ON;
> > > + intel_de_write(dev_priv, PP_CONTROL(0),
> > > val);
> > > + }
> >
> > As José said, how do you enable the workaround after resume if
> > external
> > displays are still connected?
> >
> > > bxt_enable_dc9(i915);
> > > /* Tweaked Wa_14010685332:icp,jsp,mcc */
> > > if (INTEL_PCH_TYPE(i915) >= PCH_ICP &&
> > > INTEL_PCH_TYPE(i915) <= PCH_MCC)
> > > diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c
> > > b/drivers/gpu/drm/i915/display/intel_hotplug.c
> > > index 47c85ac97c87..8e3f84100daf 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_hotplug.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_hotplug.c
> > > @@ -26,6 +26,7 @@
> > > #include "i915_drv.h"
> > > #include "intel_display_types.h"
> > > #include "intel_hotplug.h"
> > > +#include "intel_de.h"
> > >
> > > /**
> > > * DOC: Hotplug
> > > @@ -266,7 +267,9 @@ intel_encoder_hotplug(struct intel_encoder
> > > *encoder,
> > > struct intel_connector *connector)
> > > {
> > > struct drm_device *dev = connector->base.dev;
> > > + struct drm_i915_private *dev_priv = to_i915(dev);
> > > enum drm_connector_status old_status;
> > > + u32 val;
> > > u64 old_epoch_counter;
> > > bool ret = false;
> > >
> > > @@ -288,6 +291,19 @@ intel_encoder_hotplug(struct intel_encoder
> > > *encoder,
> > >
> > > drm_get_connector_status_name(connector->base.status),
> > > old_epoch_counter,
> > > connector->base.epoch_counter);
> > > +
> > > + /* Wa_14013120569:tgl */
> > > + if (IS_TIGERLAKE(dev_priv)) {
> > > + val = intel_de_read(dev_priv,
> > > PP_CONTROL(0));
> > > + if (connector->base.status ==
> > > connector_status_connected) {
> > > + val |= PANEL_POWER_ON;
> > > + intel_de_write(dev_priv,
> > > PP_CONTROL(0), val);
> > > + }
> > > + else if (connector->base.status ==
> > > connector_status_disconnected) {
> > > + val &= ~PANEL_POWER_ON;
> > > + intel_de_write(dev_priv,
> > > PP_CONTROL(0), val);
> > > + }
> > > + }
> >
> > First off, usually if you have a clean, generic, high level
> > function,
> > it's a hint you shouldn't stick low level register access there.
> >
> > If you plug in two external displays and then unplug one of them,
> > you
> > end up disabling the workaround, while it's supposed to remain
> > enabled
> > if there's an external display connected. This is likely the most
> > annoying part about the workaround.
> >
> > This does not seem like a trivial workaround to implement.
> >
>
> Yes I agree, not a trivial W/A to implement. I think few main things
> to figure out:
> - Right place to enable/disable the W/A at connect/disconnect and for
> the connectors already connected on boot - Probably in
> hdmi_init_connector() and dp_init_connector() for the connected conns
> on boot and then intel_encoder_hptplug() at the time of ext display
> hotplug/unplug
>
> @Jani having this W/A in above 2 places you think is good?
> - The other thing like Jani pointed out is that we should
> enable/disable only if !edp - so add this check for init_connector
> functions before setting/ clearing the W/A
>
> - Third thing is the wrapper function to be defined in intel_pps.c
> something like below:
>
> intel_pps_wa_enable(struct intel_dp *intel_dp)
> {
> struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> intel_wakeref_t wakeref;
>
> with_intel_pps_lock(intel_dp, wakeref) {
> i915_reg_t pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
> u32 pp;
>
> pp = intel_de_read(dev_priv, _pp_ctrl_reg(intel_dp));
> pp |= PANEL_POWER_ON;
> intel_de_write(dev_priv, pp_ctrl_reg, pp);
> intel_de_posting_read(dev_priv, pp_ctrl_reg);
> }
> }
> And similar for disabling the wa
>
> Then this function can be called in the appropriate places identified
> above.
>
> @Jani this pps helper function for enable/disable W/A makes sense?
>
>
> Regards
> Manasi
> }
> >
> > BR,
> > Jani.
> >
> >
> > > return INTEL_HOTPLUG_CHANGED;
> > > }
> > > return INTEL_HOTPLUG_UNCHANGED;
> >
> > --
> > Jani Nikula, Intel Open Source Graphics Center
- Madhumitha
More information about the Intel-gfx
mailing list