[Intel-gfx] [PATCH V2] drm/i915/cml : Add TGP PCH support

Mon Jan 4 04:40:50 UTC 2021

> -----Original Message-----
> From: Matt Roper <matthew.d.roper at intel.com>
> Sent: 01 January 2021 02:32
> To: Surendrakumar Upadhyay, TejaskumarX
> <tejaskumarx.surendrakumar.upadhyay at intel.com>
> Cc: intel-gfx at lists.freedesktop.org; Pandey, Hariom
> <hariom.pandey at intel.com>
> Subject: Re: [Intel-gfx] [PATCH V2] drm/i915/cml : Add TGP PCH support
> 
> On Thu, Dec 31, 2020 at 12:48:06AM -0800, Surendrakumar Upadhyay,
> TejaskumarX wrote:
> >
> >
> > > -----Original Message-----
> > > From: Matt Roper <matthew.d.roper at intel.com>
> > > Sent: 31 December 2020 05:31
> > > To: Surendrakumar Upadhyay, TejaskumarX
> > > <tejaskumarx.surendrakumar.upadhyay at intel.com>
> > > Cc: intel-gfx at lists.freedesktop.org; Pandey, Hariom
> > > <hariom.pandey at intel.com>
> > > Subject: Re: [Intel-gfx] [PATCH V2] drm/i915/cml : Add TGP PCH
> > > support
> > >
> > > On Mon, Dec 28, 2020 at 11:42:35AM +0530, Tejas Upadhyay wrote:
> > > > We have TGP PCH support for Tigerlake and Rocketlake. Similarly
> > > > now TGP PCH can be used with Cometlake CPU.
> > >
> > > Based on the 'compatibility' section of bspec 49181, I think the TGP
> > > PCH can technically be compatible with any gen9bc platform, not just
> CML.
> > > Although it seems unlikely that anyone is going to go back and
> > > create new products with a SKL+TGP pairing or something at this
> > > point, it's still probably best to write this patch based on GEN9_BC rather
> than CML.
> > >
> >
> >
> > Tejas : This patch is generated to support DELL's requirement where they
> are using CML CPU + TGP PCH. But I agree if we want to change CML with
> GEN9_BC. Please have a look at https://gitlab.freedesktop.org/drm/intel/-
> /issues/2742 and this patch has been verified by DELL as working for all of
> their platforms with CML CPU + TGP PCH (Off course it worked after I gave
> local workaround of Lee Shawn's patch
> https://patchwork.freedesktop.org/patch/401301/?series=83154&rev=5).
> Also this patch +
> https://patchwork.freedesktop.org/patch/401301/?series=83154&rev=5 (Lee
> Shawn's patch reviewed by you) + Adding IS_COMETLAKE check to Lee
> Shawn's patch needs to be merged by Jan 4th to complete upstreaming for
> CML CPU + TGP PCH. DELL is having critical requirement to finish upstreaming
> by Jan 4th.
> 
> The changes from Shawn are to make RKL (a gen12 platform) work with the
> older gen9-style CMP PCH.  What you're doing here is making a gen9
> platform work with a newer gen12-style TGP PCH.  Although those are
> converses of each other, I don't think the driver changes should depend on
> each other.  Shawn's series shouldn't be necessary for your work or vice
> versa.  I'm not sure when Shawn plans to merge his series; I had some
> further changes suggested, so he might be working on those before merging
> his work.

Tejas : Just to bring your attention here that RKL RVP ddc_pins are not mapped correctly with TGP PCH currently, specially when it comes to remapping of VBT values to platform. I think Shawn's patch is addressing that as well. I have tested RKL RVP we don't have right ddc pin mapping currently thus there was problem in detection of ports. Please check https://jira.devtools.intel.com/browse/VLK-16850 (ignore "port C" wording in VLK, its port TC1). Please suggest if I need to create patch for VBT remap for CML/GEN9BC  on top of Shawn's patch or I can send as part of this patchset?

> 
> I'm not sure what leads to the Jan 4th date, but assuming "finish
> upstreaming" means that you want the patch to land in a final release kernel
> by that date, there's pretty much no way that would be possible at this point.
> Getting patches like this reviewed and applied to an Intel tree is only the first
> step along the maintainer chain that eventually leads to a release from Linus
> or a stable kernel maintainer.
> Plus when a customer says they want something upstream, one of the most
> important things for them is that the patch has been fully reviewed and
> tested and has a relatively high chance of being correct.  We can't rush
> patches in to meet deadlines if we think they're only going to work in certain
> situations and cause problems for other ones.
> 
> One other thing that I don't see addressed anywhere in this patch is that the
> driver doesn't consider gen9 + TGP to be a valid combination and will throw a
> warning in intel_pch_type() if detected.

Tejas : Yes I am planning to add GEN9 + TGP as valid combo, so it does not throw warning. And about the deadline, we will follow our process for sure.

> 
> >
> > > >
> > > > Changes since V1 :
> > > > - Matched HPD Pin mapping for PORT C and PORT D of CML CPU.
> > > >
> > > > Cc : Matt Roper <matthew.d.roper at intel.com> Cc : Ville Syrjälä
> > > > <ville.syrjala at linux.intel.com>
> > > > Signed-off-by: Tejas Upadhyay
> > > > <tejaskumarx.surendrakumar.upadhyay at intel.com>
> > > > ---
> > > >  drivers/gpu/drm/i915/display/intel_ddi.c     | 7 +++++--
> > > >  drivers/gpu/drm/i915/display/intel_display.c | 5 +++++
> > > >  drivers/gpu/drm/i915/display/intel_hdmi.c    | 3 ++-
> > > >  3 files changed, 12 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> > > > b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > > index 17eaa56c5a99..181d60a5e145 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > > @@ -5301,7 +5301,9 @@ static enum hpd_pin dg1_hpd_pin(struct
> > > > drm_i915_private *dev_priv,  static enum hpd_pin
> > > > tgl_hpd_pin(struct
> > > drm_i915_private *dev_priv,
> > > >  enum port port)
> > > >  {
> > > > -if (port >= PORT_TC1)
> > > > +if (IS_COMETLAKE(dev_priv) && port >= PORT_C) return
> HPD_PORT_TC1
> > > > ++ port + 1 - PORT_TC1;
> 
> Why is the offset written as "port + 1 - PORT_TC1?"  This platform doesn't
> have TC ports as inputs, so it's completely unintuitive how "+ 1 - PORT_TC1"
> would relate to PORT_C unless you go lookup the enum values (plus the
> unexpected "+1" part is really easy to overlook as I did the first time I looked
> through this patch).
> 
> This should just be written with a more straightforward offset as:
> 
>         return HPD_PORT_TC1 + port - PORT_C;
Tejas : Ok.
> 
> > > > +else if (port >= PORT_TC1)
> > > >  return HPD_PORT_TC1 + port - PORT_TC1;  else  return HPD_PORT_A +
> > > > port - PORT_A; @@ -5455,7 +5457,8 @@ void intel_ddi_init(struct
> > > > drm_i915_private *dev_priv, enum port port)
> > > >
> > > >  if (IS_DG1(dev_priv))
> > > >  encoder->hpd_pin = dg1_hpd_pin(dev_priv, port); -else if
> > > > (IS_ROCKETLAKE(dev_priv))
> > > > +else if (IS_ROCKETLAKE(dev_priv) || (IS_COMETLAKE(dev_priv) &&
> > > > +     HAS_PCH_TGP(dev_priv)))
> > > >  encoder->hpd_pin = rkl_hpd_pin(dev_priv, port);  else if
> > > > (INTEL_GEN(dev_priv) >= 12)
> > >
> > > I'd suggest leaving the RKL condition alone since nothing here has
> > > anything to do with RKL.  Instead change the gen12+ condition to
> > > HAS_PCH_TGP() and update the TGP-specific handler to do the port
> > > mapping described on bspec 49181.
> > >
> > Tejas : Ok.
> >
> > > Plus I don't think what you have here would map the ports correctly
> anyway.
> > > gen9 PORT_C/PORT_D would map to HPD_PORT_C/HPD_PORT_TC1 with
> the
> > > logic here, whereas the bspec says they should map to
> > > HPD_PORT_TC1/HPD_PORT_TC2.
> > >
> > Tejas : This have been taken care in tgl_hpd_pin() API with right HPD pin
> mapping and its tested working on RVP as well as by DELL.
> >
> > > >  encoder->hpd_pin = tgl_hpd_pin(dev_priv, port); diff --git
> > > > a/drivers/gpu/drm/i915/display/intel_display.c
> > > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > > index f2c48e5cdb43..47014471658f 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > @@ -16163,6 +16163,11 @@ static void intel_setup_outputs(struct
> > > drm_i915_private *dev_priv)
> > > >  intel_ddi_init(dev_priv, PORT_F);
> > > >
> > > >  icl_dsi_init(dev_priv);
> > > > +} else if (IS_COMETLAKE(dev_priv) && HAS_PCH_TGP(dev_priv)) {
> > > > +intel_ddi_init(dev_priv, PORT_A); intel_ddi_init(dev_priv,
> > > > +PORT_B); intel_ddi_init(dev_priv, PORT_C);
> > > > +intel_ddi_init(dev_priv, PORT_D);
> > >
> > > As noted before, this relates to gen9bc in general, not just CML.
> > >
> > Tejas : I will add GEN9BC check here with TGP specific handle.
> >
> > > Is the only reason for this block because TGP's instance of
> > > SFUSE_STRAP doesn't have output presence bits anymore?  If you want,
> > > you could keep using the existing gen9bc block for consistency, but
> > > make the SFUSE_STRAP checks themselves conditional on a platform
> > > that has the presence bits.  E.g.,
> > >
> > Tejas : I am not much familiar with STRAP, can I go ahead with above
> approach GEN9BC && TGP PCH check?
> 
> The output initialization is already a bit of a mess (and we plan to overhaul
> the design soon), so adding special case conditions like this just makes it
> more complicated and harder to follow.  I'm asking what led you to create a
> new block rather than just letting the existing block continue to be used.  I
> can see where TGP's lack of strap bits could be a problem (since reading
> those bits as 0 would incorrectly lead you to believe that the output didn't
> exist), but if that's the only thing you were trying to avoid, then it's probably
> simpler to just update the place we read the fuse value.  Were there other
> reasons you also decided to create a new block?

Tejas : As I told I am not much clear with STRAP logic, but the observation was that only port A output was getting initialized by default. Okay I will avoid fuse checks for GEN9 BC && TGP PCH case and use existing blocks.
> 
> 
> >
> > >     /* ICP+ no longer has port presence bits */
> > >     found = INTEL_PCH_TYPE(dev_priv) >= PCH_ICP ?
> > >         ~0 : intel_de_read(dev_priv, SFUSE_STRAP);
> > >
> > > >  } else if (IS_GEN9_LP(dev_priv)) {
> > > >  /*
> > > >   * FIXME: Broxton doesn't support port detection via the diff -
> > > -git
> > > > a/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > > b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > > index c5959590562b..540c9d54b595 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > > @@ -3174,7 +3174,8 @@ static u8 intel_hdmi_ddc_pin(struct
> > > > intel_encoder *encoder)
> > > >
> > > >  if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)  ddc_pin =
> > > > dg1_port_to_ddc_pin(dev_priv, port); -else if
> > > > (IS_ROCKETLAKE(dev_priv))
> > > > +else if (IS_ROCKETLAKE(dev_priv) || (IS_COMETLAKE(dev_priv) &&
> > > > +     HAS_PCH_TGP(dev_priv)))
> > > >  ddc_pin = rkl_port_to_ddc_pin(dev_priv, port);
> > >
> > > As above, none of the changes in this patch have any relation to
> > > RKL, so it doesn't make sense to update the RKL condition.  Instead
> > > just add the gen9bc port mapping logic to icl_port_to_ddc_pin().
> > >
> > Tejas : Ok.
> > > Plus, it looks like what you have here right now will make the same
> > > mapping mistake for C and D that the HPD logic did.
> > >
> > Tejas : It is doing proper pin mapping. Its tested by us on RVP and by DELL.
> 
> Are you sure this was fully tested and you didn't forget any of the outputs?
> The first thing the function does is
> 
>         WARN_ON(port == PORT_C);
> 
> which means that you should have immediately started seeing warnings on
> any CML platforms with an HDMI output on DDI-C (which is a valid setup).
> What we should be warning on is PORT_A since gen9 platforms like CML
> can't handle HDMI on port A.
Tejas : Warns are coming, but they will not affect result. However I am planning to remove/update warns in the next patch versions. Also yes we have tested with 4 (A,B,C,D) outputs. I know the fact that CML has E output as well but I have not added it, should I add that also?. So far RKL (UDIMM) RVP + TGP (with all ports), RKL (SODIMM) RVP + TGP (with all ports), CML (UDIMM) RVP + TGP (with A,B,C,D ports), CML (SODIMM) RVP + TGP (with A,B,C,D ports), AIO(Canonical/Wostron, CML CPU(RKL RVP) + TGP PCH), Caribou(Dell board, CML CPU(RKL RVP) + TGP PCH), Seal(Dell board, CML CPU(RKL RVP) + TGP PCH), Proghron(Canonical/Wostron, CML CPU(RKL RVP) + TGP PCH) boards are tested and successfully able to enumerate all the ports (including HDMI on every board).
> 
> 
> Matt
> 
> > >
> > > Matt
> > >
> > > >  else if (HAS_PCH_MCC(dev_priv))
> > > >  ddc_pin = mcc_port_to_ddc_pin(dev_priv, port);
> > > > --
> > > > 2.28.0
> > > >
> > > > _______________________________________________
> > > > Intel-gfx mailing list
> > > > Intel-gfx at lists.freedesktop.org
> > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > >
> > > --
> > > Matt Roper
> > > Graphics Software Engineer
> > > VTT-OSGC Platform Enablement
> > > Intel Corporation
> > > (916) 356-2795
> 
> --
> Matt Roper
> Graphics Software Engineer
> VTT-OSGC Platform Enablement
> Intel Corporation
> (916) 356-2795