[Intel-gfx] [PATCH v2 01/17] drm/i915/pps: abstract panel power sequencer from intel_dp.c
Jani Nikula
jani.nikula at intel.com
Fri Jan 8 17:44:09 UTC 2021
In a long overdue refactoring, split out all panel sequencer code from
intel_dp.c to new intel_pps.[ch].
The first part is mostly just code movement as-is, without cleanups or
functional changes.
We need to add a vlv_get_dpll() helper to get at the vlv/chv dpll from
pps code.
v2: Rebase.
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/display/intel_ddi.c | 1 +
.../drm/i915/display/intel_display_power.c | 2 +-
drivers/gpu/drm/i915/display/intel_dp.c | 1436 +----------------
drivers/gpu/drm/i915/display/intel_dp.h | 5 +-
drivers/gpu/drm/i915/display/intel_pps.c | 1334 +++++++++++++++
drivers/gpu/drm/i915/display/intel_pps.h | 53 +
7 files changed, 1443 insertions(+), 1389 deletions(-)
create mode 100644 drivers/gpu/drm/i915/display/intel_pps.c
create mode 100644 drivers/gpu/drm/i915/display/intel_pps.h
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 4074d8cb0d6e..8a04403a11bb 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -251,6 +251,7 @@ i915-y += \
display/intel_lspcon.o \
display/intel_lvds.o \
display/intel_panel.o \
+ display/intel_pps.o \
display/intel_sdvo.o \
display/intel_tv.o \
display/intel_vdsc.o \
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 3df6913369bc..f09a597bf730 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -46,6 +46,7 @@
#include "intel_hotplug.h"
#include "intel_lspcon.h"
#include "intel_panel.h"
+#include "intel_pps.h"
#include "intel_psr.h"
#include "intel_sprite.h"
#include "intel_tc.h"
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index d52374f01316..a11bd8213df4 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -4,7 +4,6 @@
*/
#include "display/intel_crt.h"
-#include "display/intel_dp.h"
#include "i915_drv.h"
#include "i915_irq.h"
@@ -16,6 +15,7 @@
#include "intel_dpio_phy.h"
#include "intel_hotplug.h"
#include "intel_pm.h"
+#include "intel_pps.h"
#include "intel_sideband.h"
#include "intel_tc.h"
#include "intel_vga.h"
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 4f190a82d4ad..07279b10812e 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -58,6 +58,7 @@
#include "intel_lspcon.h"
#include "intel_lvds.h"
#include "intel_panel.h"
+#include "intel_pps.h"
#include "intel_psr.h"
#include "intel_sideband.h"
#include "intel_tc.h"
@@ -121,6 +122,11 @@ static const struct dp_link_dpll chv_dpll[] = {
{ .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } },
};
+const struct dpll *vlv_get_dpll(struct drm_i915_private *i915)
+{
+ return IS_CHERRYVIEW(i915) ? &chv_dpll[0].dpll : &vlv_dpll[0].dpll;
+}
+
/* Constants for DP DSC configurations */
static const u8 valid_dsc_bpp[] = {6, 8, 10, 12, 15};
@@ -145,12 +151,6 @@ bool intel_dp_is_edp(struct intel_dp *intel_dp)
static void intel_dp_link_down(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state);
-static bool edp_panel_vdd_on(struct intel_dp *intel_dp);
-static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
-static void vlv_init_panel_power_sequencer(struct intel_encoder *encoder,
- const struct intel_crtc_state *crtc_state);
-static void vlv_steal_power_sequencer(struct drm_i915_private *dev_priv,
- enum pipe pipe);
static void intel_dp_unset_edid(struct intel_dp *intel_dp);
/* update sink rates from dpcd */
@@ -877,447 +877,6 @@ static void intel_dp_unpack_aux(u32 src, u8 *dst, int dst_bytes)
dst[i] = src >> ((3-i) * 8);
}
-static void
-intel_dp_init_panel_power_sequencer(struct intel_dp *intel_dp);
-static void
-intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
- bool force_disable_vdd);
-static void
-intel_dp_pps_init(struct intel_dp *intel_dp);
-
-static intel_wakeref_t
-pps_lock(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- intel_wakeref_t wakeref;
-
- /*
- * See intel_power_sequencer_reset() why we need
- * a power domain reference here.
- */
- wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE);
- mutex_lock(&dev_priv->pps_mutex);
-
- return wakeref;
-}
-
-static intel_wakeref_t
-pps_unlock(struct intel_dp *intel_dp, intel_wakeref_t wakeref)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- mutex_unlock(&dev_priv->pps_mutex);
- intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
- return 0;
-}
-
-#define with_pps_lock(dp, wf) \
- for ((wf) = pps_lock(dp); (wf); (wf) = pps_unlock((dp), (wf)))
-
-static void
-vlv_power_sequencer_kick(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- enum pipe pipe = intel_dp->pps_pipe;
- bool pll_enabled, release_cl_override = false;
- enum dpio_phy phy = DPIO_PHY(pipe);
- enum dpio_channel ch = vlv_pipe_to_channel(pipe);
- u32 DP;
-
- if (drm_WARN(&dev_priv->drm,
- intel_de_read(dev_priv, intel_dp->output_reg) & DP_PORT_EN,
- "skipping pipe %c power sequencer kick due to [ENCODER:%d:%s] being active\n",
- pipe_name(pipe), dig_port->base.base.base.id,
- dig_port->base.base.name))
- return;
-
- drm_dbg_kms(&dev_priv->drm,
- "kicking pipe %c power sequencer for [ENCODER:%d:%s]\n",
- pipe_name(pipe), dig_port->base.base.base.id,
- dig_port->base.base.name);
-
- /* Preserve the BIOS-computed detected bit. This is
- * supposed to be read-only.
- */
- DP = intel_de_read(dev_priv, intel_dp->output_reg) & DP_DETECTED;
- DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
- DP |= DP_PORT_WIDTH(1);
- DP |= DP_LINK_TRAIN_PAT_1;
-
- if (IS_CHERRYVIEW(dev_priv))
- DP |= DP_PIPE_SEL_CHV(pipe);
- else
- DP |= DP_PIPE_SEL(pipe);
-
- pll_enabled = intel_de_read(dev_priv, DPLL(pipe)) & DPLL_VCO_ENABLE;
-
- /*
- * The DPLL for the pipe must be enabled for this to work.
- * So enable temporarily it if it's not already enabled.
- */
- if (!pll_enabled) {
- release_cl_override = IS_CHERRYVIEW(dev_priv) &&
- !chv_phy_powergate_ch(dev_priv, phy, ch, true);
-
- if (vlv_force_pll_on(dev_priv, pipe, IS_CHERRYVIEW(dev_priv) ?
- &chv_dpll[0].dpll : &vlv_dpll[0].dpll)) {
- drm_err(&dev_priv->drm,
- "Failed to force on pll for pipe %c!\n",
- pipe_name(pipe));
- return;
- }
- }
-
- /*
- * Similar magic as in intel_dp_enable_port().
- * We _must_ do this port enable + disable trick
- * to make this power sequencer lock onto the port.
- * Otherwise even VDD force bit won't work.
- */
- intel_de_write(dev_priv, intel_dp->output_reg, DP);
- intel_de_posting_read(dev_priv, intel_dp->output_reg);
-
- intel_de_write(dev_priv, intel_dp->output_reg, DP | DP_PORT_EN);
- intel_de_posting_read(dev_priv, intel_dp->output_reg);
-
- intel_de_write(dev_priv, intel_dp->output_reg, DP & ~DP_PORT_EN);
- intel_de_posting_read(dev_priv, intel_dp->output_reg);
-
- if (!pll_enabled) {
- vlv_force_pll_off(dev_priv, pipe);
-
- if (release_cl_override)
- chv_phy_powergate_ch(dev_priv, phy, ch, false);
- }
-}
-
-static enum pipe vlv_find_free_pps(struct drm_i915_private *dev_priv)
-{
- struct intel_encoder *encoder;
- unsigned int pipes = (1 << PIPE_A) | (1 << PIPE_B);
-
- /*
- * We don't have power sequencer currently.
- * Pick one that's not used by other ports.
- */
- for_each_intel_dp(&dev_priv->drm, encoder) {
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-
- if (encoder->type == INTEL_OUTPUT_EDP) {
- drm_WARN_ON(&dev_priv->drm,
- intel_dp->active_pipe != INVALID_PIPE &&
- intel_dp->active_pipe !=
- intel_dp->pps_pipe);
-
- if (intel_dp->pps_pipe != INVALID_PIPE)
- pipes &= ~(1 << intel_dp->pps_pipe);
- } else {
- drm_WARN_ON(&dev_priv->drm,
- intel_dp->pps_pipe != INVALID_PIPE);
-
- if (intel_dp->active_pipe != INVALID_PIPE)
- pipes &= ~(1 << intel_dp->active_pipe);
- }
- }
-
- if (pipes == 0)
- return INVALID_PIPE;
-
- return ffs(pipes) - 1;
-}
-
-static enum pipe
-vlv_power_sequencer_pipe(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- enum pipe pipe;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- /* We should never land here with regular DP ports */
- drm_WARN_ON(&dev_priv->drm, !intel_dp_is_edp(intel_dp));
-
- drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE &&
- intel_dp->active_pipe != intel_dp->pps_pipe);
-
- if (intel_dp->pps_pipe != INVALID_PIPE)
- return intel_dp->pps_pipe;
-
- pipe = vlv_find_free_pps(dev_priv);
-
- /*
- * Didn't find one. This should not happen since there
- * are two power sequencers and up to two eDP ports.
- */
- if (drm_WARN_ON(&dev_priv->drm, pipe == INVALID_PIPE))
- pipe = PIPE_A;
-
- vlv_steal_power_sequencer(dev_priv, pipe);
- intel_dp->pps_pipe = pipe;
-
- drm_dbg_kms(&dev_priv->drm,
- "picked pipe %c power sequencer for [ENCODER:%d:%s]\n",
- pipe_name(intel_dp->pps_pipe),
- dig_port->base.base.base.id,
- dig_port->base.base.name);
-
- /* init power sequencer on this pipe and port */
- intel_dp_init_panel_power_sequencer(intel_dp);
- intel_dp_init_panel_power_sequencer_registers(intel_dp, true);
-
- /*
- * Even vdd force doesn't work until we've made
- * the power sequencer lock in on the port.
- */
- vlv_power_sequencer_kick(intel_dp);
-
- return intel_dp->pps_pipe;
-}
-
-static int
-bxt_power_sequencer_idx(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- int backlight_controller = dev_priv->vbt.backlight.controller;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- /* We should never land here with regular DP ports */
- drm_WARN_ON(&dev_priv->drm, !intel_dp_is_edp(intel_dp));
-
- if (!intel_dp->pps_reset)
- return backlight_controller;
-
- intel_dp->pps_reset = false;
-
- /*
- * Only the HW needs to be reprogrammed, the SW state is fixed and
- * has been setup during connector init.
- */
- intel_dp_init_panel_power_sequencer_registers(intel_dp, false);
-
- return backlight_controller;
-}
-
-typedef bool (*vlv_pipe_check)(struct drm_i915_private *dev_priv,
- enum pipe pipe);
-
-static bool vlv_pipe_has_pp_on(struct drm_i915_private *dev_priv,
- enum pipe pipe)
-{
- return intel_de_read(dev_priv, PP_STATUS(pipe)) & PP_ON;
-}
-
-static bool vlv_pipe_has_vdd_on(struct drm_i915_private *dev_priv,
- enum pipe pipe)
-{
- return intel_de_read(dev_priv, PP_CONTROL(pipe)) & EDP_FORCE_VDD;
-}
-
-static bool vlv_pipe_any(struct drm_i915_private *dev_priv,
- enum pipe pipe)
-{
- return true;
-}
-
-static enum pipe
-vlv_initial_pps_pipe(struct drm_i915_private *dev_priv,
- enum port port,
- vlv_pipe_check pipe_check)
-{
- enum pipe pipe;
-
- for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) {
- u32 port_sel = intel_de_read(dev_priv, PP_ON_DELAYS(pipe)) &
- PANEL_PORT_SELECT_MASK;
-
- if (port_sel != PANEL_PORT_SELECT_VLV(port))
- continue;
-
- if (!pipe_check(dev_priv, pipe))
- continue;
-
- return pipe;
- }
-
- return INVALID_PIPE;
-}
-
-static void
-vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- enum port port = dig_port->base.port;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- /* try to find a pipe with this port selected */
- /* first pick one where the panel is on */
- intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
- vlv_pipe_has_pp_on);
- /* didn't find one? pick one where vdd is on */
- if (intel_dp->pps_pipe == INVALID_PIPE)
- intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
- vlv_pipe_has_vdd_on);
- /* didn't find one? pick one with just the correct port */
- if (intel_dp->pps_pipe == INVALID_PIPE)
- intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
- vlv_pipe_any);
-
- /* didn't find one? just let vlv_power_sequencer_pipe() pick one when needed */
- if (intel_dp->pps_pipe == INVALID_PIPE) {
- drm_dbg_kms(&dev_priv->drm,
- "no initial power sequencer for [ENCODER:%d:%s]\n",
- dig_port->base.base.base.id,
- dig_port->base.base.name);
- return;
- }
-
- drm_dbg_kms(&dev_priv->drm,
- "initial power sequencer for [ENCODER:%d:%s]: pipe %c\n",
- dig_port->base.base.base.id,
- dig_port->base.base.name,
- pipe_name(intel_dp->pps_pipe));
-
- intel_dp_init_panel_power_sequencer(intel_dp);
- intel_dp_init_panel_power_sequencer_registers(intel_dp, false);
-}
-
-void intel_power_sequencer_reset(struct drm_i915_private *dev_priv)
-{
- struct intel_encoder *encoder;
-
- if (drm_WARN_ON(&dev_priv->drm,
- !(IS_VALLEYVIEW(dev_priv) ||
- IS_CHERRYVIEW(dev_priv) ||
- IS_GEN9_LP(dev_priv))))
- return;
-
- /*
- * We can't grab pps_mutex here due to deadlock with power_domain
- * mutex when power_domain functions are called while holding pps_mutex.
- * That also means that in order to use pps_pipe the code needs to
- * hold both a power domain reference and pps_mutex, and the power domain
- * reference get/put must be done while _not_ holding pps_mutex.
- * pps_{lock,unlock}() do these steps in the correct order, so one
- * should use them always.
- */
-
- for_each_intel_dp(&dev_priv->drm, encoder) {
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-
- drm_WARN_ON(&dev_priv->drm,
- intel_dp->active_pipe != INVALID_PIPE);
-
- if (encoder->type != INTEL_OUTPUT_EDP)
- continue;
-
- if (IS_GEN9_LP(dev_priv))
- intel_dp->pps_reset = true;
- else
- intel_dp->pps_pipe = INVALID_PIPE;
- }
-}
-
-struct pps_registers {
- i915_reg_t pp_ctrl;
- i915_reg_t pp_stat;
- i915_reg_t pp_on;
- i915_reg_t pp_off;
- i915_reg_t pp_div;
-};
-
-static void intel_pps_get_registers(struct intel_dp *intel_dp,
- struct pps_registers *regs)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- int pps_idx = 0;
-
- memset(regs, 0, sizeof(*regs));
-
- if (IS_GEN9_LP(dev_priv))
- pps_idx = bxt_power_sequencer_idx(intel_dp);
- else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
- pps_idx = vlv_power_sequencer_pipe(intel_dp);
-
- regs->pp_ctrl = PP_CONTROL(pps_idx);
- regs->pp_stat = PP_STATUS(pps_idx);
- regs->pp_on = PP_ON_DELAYS(pps_idx);
- regs->pp_off = PP_OFF_DELAYS(pps_idx);
-
- /* Cycle delay moved from PP_DIVISOR to PP_CONTROL */
- if (IS_GEN9_LP(dev_priv) || INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
- regs->pp_div = INVALID_MMIO_REG;
- else
- regs->pp_div = PP_DIVISOR(pps_idx);
-}
-
-static i915_reg_t
-_pp_ctrl_reg(struct intel_dp *intel_dp)
-{
- struct pps_registers regs;
-
- intel_pps_get_registers(intel_dp, ®s);
-
- return regs.pp_ctrl;
-}
-
-static i915_reg_t
-_pp_stat_reg(struct intel_dp *intel_dp)
-{
- struct pps_registers regs;
-
- intel_pps_get_registers(intel_dp, ®s);
-
- return regs.pp_stat;
-}
-
-static bool edp_have_panel_power(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
- intel_dp->pps_pipe == INVALID_PIPE)
- return false;
-
- return (intel_de_read(dev_priv, _pp_stat_reg(intel_dp)) & PP_ON) != 0;
-}
-
-static bool edp_have_panel_vdd(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
- intel_dp->pps_pipe == INVALID_PIPE)
- return false;
-
- return intel_de_read(dev_priv, _pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD;
-}
-
-static void
-intel_dp_check_edp(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- if (!intel_dp_is_edp(intel_dp))
- return;
-
- if (!edp_have_panel_power(intel_dp) && !edp_have_panel_vdd(intel_dp)) {
- drm_WARN(&dev_priv->drm, 1,
- "eDP powered off while attempting aux channel communication.\n");
- drm_dbg_kms(&dev_priv->drm, "Status 0x%08x Control 0x%08x\n",
- intel_de_read(dev_priv, _pp_stat_reg(intel_dp)),
- intel_de_read(dev_priv, _pp_ctrl_reg(intel_dp)));
- }
-}
-
static u32
intel_dp_aux_wait_done(struct intel_dp *intel_dp)
{
@@ -2931,491 +2490,66 @@ static void intel_dp_prepare(struct intel_encoder *encoder,
* IBX PCH and CPU are the same for almost everything,
* except that the CPU DP PLL is configured in this
* register
- *
- * CPT PCH is quite different, having many bits moved
- * to the TRANS_DP_CTL register instead. That
- * configuration happens (oddly) in ilk_pch_enable
- */
-
- /* Preserve the BIOS-computed detected bit. This is
- * supposed to be read-only.
- */
- intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg) & DP_DETECTED;
-
- /* Handle DP bits in common between all three register formats */
- intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
- intel_dp->DP |= DP_PORT_WIDTH(pipe_config->lane_count);
-
- /* Split out the IBX/CPU vs CPT settings */
-
- if (IS_IVYBRIDGE(dev_priv) && port == PORT_A) {
- if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
- intel_dp->DP |= DP_SYNC_HS_HIGH;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
- intel_dp->DP |= DP_SYNC_VS_HIGH;
- intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
-
- if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
- intel_dp->DP |= DP_ENHANCED_FRAMING;
-
- intel_dp->DP |= DP_PIPE_SEL_IVB(crtc->pipe);
- } else if (HAS_PCH_CPT(dev_priv) && port != PORT_A) {
- u32 trans_dp;
-
- intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
-
- trans_dp = intel_de_read(dev_priv, TRANS_DP_CTL(crtc->pipe));
- if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
- trans_dp |= TRANS_DP_ENH_FRAMING;
- else
- trans_dp &= ~TRANS_DP_ENH_FRAMING;
- intel_de_write(dev_priv, TRANS_DP_CTL(crtc->pipe), trans_dp);
- } else {
- if (IS_G4X(dev_priv) && pipe_config->limited_color_range)
- intel_dp->DP |= DP_COLOR_RANGE_16_235;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
- intel_dp->DP |= DP_SYNC_HS_HIGH;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
- intel_dp->DP |= DP_SYNC_VS_HIGH;
- intel_dp->DP |= DP_LINK_TRAIN_OFF;
-
- if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
- intel_dp->DP |= DP_ENHANCED_FRAMING;
-
- if (IS_CHERRYVIEW(dev_priv))
- intel_dp->DP |= DP_PIPE_SEL_CHV(crtc->pipe);
- else
- intel_dp->DP |= DP_PIPE_SEL(crtc->pipe);
- }
-}
-
-#define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
-#define IDLE_ON_VALUE (PP_ON | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE)
-
-#define IDLE_OFF_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | 0)
-#define IDLE_OFF_VALUE (0 | PP_SEQUENCE_NONE | 0 | 0)
-
-#define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK)
-#define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE)
-
-static void intel_pps_verify_state(struct intel_dp *intel_dp);
-
-static void wait_panel_status(struct intel_dp *intel_dp,
- u32 mask,
- u32 value)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- i915_reg_t pp_stat_reg, pp_ctrl_reg;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- intel_pps_verify_state(intel_dp);
-
- pp_stat_reg = _pp_stat_reg(intel_dp);
- pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
-
- drm_dbg_kms(&dev_priv->drm,
- "mask %08x value %08x status %08x control %08x\n",
- mask, value,
- intel_de_read(dev_priv, pp_stat_reg),
- intel_de_read(dev_priv, pp_ctrl_reg));
-
- if (intel_de_wait_for_register(dev_priv, pp_stat_reg,
- mask, value, 5000))
- drm_err(&dev_priv->drm,
- "Panel status timeout: status %08x control %08x\n",
- intel_de_read(dev_priv, pp_stat_reg),
- intel_de_read(dev_priv, pp_ctrl_reg));
-
- drm_dbg_kms(&dev_priv->drm, "Wait complete\n");
-}
-
-static void wait_panel_on(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *i915 = dp_to_i915(intel_dp);
-
- drm_dbg_kms(&i915->drm, "Wait for panel power on\n");
- wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE);
-}
-
-static void wait_panel_off(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *i915 = dp_to_i915(intel_dp);
-
- drm_dbg_kms(&i915->drm, "Wait for panel power off time\n");
- wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE);
-}
-
-static void wait_panel_power_cycle(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *i915 = dp_to_i915(intel_dp);
- ktime_t panel_power_on_time;
- s64 panel_power_off_duration;
-
- drm_dbg_kms(&i915->drm, "Wait for panel power cycle\n");
-
- /* take the difference of currrent time and panel power off time
- * and then make panel wait for t11_t12 if needed. */
- panel_power_on_time = ktime_get_boottime();
- panel_power_off_duration = ktime_ms_delta(panel_power_on_time, intel_dp->panel_power_off_time);
-
- /* When we disable the VDD override bit last we have to do the manual
- * wait. */
- if (panel_power_off_duration < (s64)intel_dp->panel_power_cycle_delay)
- wait_remaining_ms_from_jiffies(jiffies,
- intel_dp->panel_power_cycle_delay - panel_power_off_duration);
-
- wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
-}
-
-static void wait_backlight_on(struct intel_dp *intel_dp)
-{
- wait_remaining_ms_from_jiffies(intel_dp->last_power_on,
- intel_dp->backlight_on_delay);
-}
-
-static void edp_wait_backlight_off(struct intel_dp *intel_dp)
-{
- wait_remaining_ms_from_jiffies(intel_dp->last_backlight_off,
- intel_dp->backlight_off_delay);
-}
-
-/* Read the current pp_control value, unlocking the register if it
- * is locked
- */
-
-static u32 ilk_get_pp_control(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- u32 control;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- control = intel_de_read(dev_priv, _pp_ctrl_reg(intel_dp));
- if (drm_WARN_ON(&dev_priv->drm, !HAS_DDI(dev_priv) &&
- (control & PANEL_UNLOCK_MASK) != PANEL_UNLOCK_REGS)) {
- control &= ~PANEL_UNLOCK_MASK;
- control |= PANEL_UNLOCK_REGS;
- }
- return control;
-}
-
-/*
- * Must be paired with edp_panel_vdd_off().
- * Must hold pps_mutex around the whole on/off sequence.
- * Can be nested with intel_edp_panel_vdd_{on,off}() calls.
- */
-static bool edp_panel_vdd_on(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- u32 pp;
- i915_reg_t pp_stat_reg, pp_ctrl_reg;
- bool need_to_disable = !intel_dp->want_panel_vdd;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- if (!intel_dp_is_edp(intel_dp))
- return false;
-
- cancel_delayed_work(&intel_dp->panel_vdd_work);
- intel_dp->want_panel_vdd = true;
-
- if (edp_have_panel_vdd(intel_dp))
- return need_to_disable;
-
- drm_WARN_ON(&dev_priv->drm, intel_dp->vdd_wakeref);
- intel_dp->vdd_wakeref = intel_display_power_get(dev_priv,
- intel_aux_power_domain(dig_port));
-
- drm_dbg_kms(&dev_priv->drm, "Turning [ENCODER:%d:%s] VDD on\n",
- dig_port->base.base.base.id,
- dig_port->base.base.name);
-
- if (!edp_have_panel_power(intel_dp))
- wait_panel_power_cycle(intel_dp);
-
- pp = ilk_get_pp_control(intel_dp);
- pp |= EDP_FORCE_VDD;
-
- pp_stat_reg = _pp_stat_reg(intel_dp);
- pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
-
- intel_de_write(dev_priv, pp_ctrl_reg, pp);
- intel_de_posting_read(dev_priv, pp_ctrl_reg);
- drm_dbg_kms(&dev_priv->drm, "PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
- intel_de_read(dev_priv, pp_stat_reg),
- intel_de_read(dev_priv, pp_ctrl_reg));
- /*
- * If the panel wasn't on, delay before accessing aux channel
- */
- if (!edp_have_panel_power(intel_dp)) {
- drm_dbg_kms(&dev_priv->drm,
- "[ENCODER:%d:%s] panel power wasn't enabled\n",
- dig_port->base.base.base.id,
- dig_port->base.base.name);
- msleep(intel_dp->panel_power_up_delay);
- }
-
- return need_to_disable;
-}
-
-/*
- * Must be paired with intel_edp_panel_vdd_off() or
- * intel_edp_panel_off().
- * Nested calls to these functions are not allowed since
- * we drop the lock. Caller must use some higher level
- * locking to prevent nested calls from other threads.
- */
-void intel_edp_panel_vdd_on(struct intel_dp *intel_dp)
-{
- intel_wakeref_t wakeref;
- bool vdd;
-
- if (!intel_dp_is_edp(intel_dp))
- return;
-
- vdd = false;
- with_pps_lock(intel_dp, wakeref)
- vdd = edp_panel_vdd_on(intel_dp);
- I915_STATE_WARN(!vdd, "[ENCODER:%d:%s] VDD already requested on\n",
- dp_to_dig_port(intel_dp)->base.base.base.id,
- dp_to_dig_port(intel_dp)->base.base.name);
-}
-
-static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- struct intel_digital_port *dig_port =
- dp_to_dig_port(intel_dp);
- u32 pp;
- i915_reg_t pp_stat_reg, pp_ctrl_reg;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- drm_WARN_ON(&dev_priv->drm, intel_dp->want_panel_vdd);
-
- if (!edp_have_panel_vdd(intel_dp))
- return;
-
- drm_dbg_kms(&dev_priv->drm, "Turning [ENCODER:%d:%s] VDD off\n",
- dig_port->base.base.base.id,
- dig_port->base.base.name);
-
- pp = ilk_get_pp_control(intel_dp);
- pp &= ~EDP_FORCE_VDD;
-
- pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
- pp_stat_reg = _pp_stat_reg(intel_dp);
-
- intel_de_write(dev_priv, pp_ctrl_reg, pp);
- intel_de_posting_read(dev_priv, pp_ctrl_reg);
-
- /* Make sure sequencer is idle before allowing subsequent activity */
- drm_dbg_kms(&dev_priv->drm, "PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
- intel_de_read(dev_priv, pp_stat_reg),
- intel_de_read(dev_priv, pp_ctrl_reg));
-
- if ((pp & PANEL_POWER_ON) == 0)
- intel_dp->panel_power_off_time = ktime_get_boottime();
-
- intel_display_power_put(dev_priv,
- intel_aux_power_domain(dig_port),
- fetch_and_zero(&intel_dp->vdd_wakeref));
-}
-
-static void edp_panel_vdd_work(struct work_struct *__work)
-{
- struct intel_dp *intel_dp =
- container_of(to_delayed_work(__work),
- struct intel_dp, panel_vdd_work);
- intel_wakeref_t wakeref;
-
- with_pps_lock(intel_dp, wakeref) {
- if (!intel_dp->want_panel_vdd)
- edp_panel_vdd_off_sync(intel_dp);
- }
-}
-
-static void edp_panel_vdd_schedule_off(struct intel_dp *intel_dp)
-{
- unsigned long delay;
-
- /*
- * Queue the timer to fire a long time from now (relative to the power
- * down delay) to keep the panel power up across a sequence of
- * operations.
- */
- delay = msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5);
- schedule_delayed_work(&intel_dp->panel_vdd_work, delay);
-}
-
-/*
- * Must be paired with edp_panel_vdd_on().
- * Must hold pps_mutex around the whole on/off sequence.
- * Can be nested with intel_edp_panel_vdd_{on,off}() calls.
- */
-static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- if (!intel_dp_is_edp(intel_dp))
- return;
-
- I915_STATE_WARN(!intel_dp->want_panel_vdd, "[ENCODER:%d:%s] VDD not forced on",
- dp_to_dig_port(intel_dp)->base.base.base.id,
- dp_to_dig_port(intel_dp)->base.base.name);
-
- intel_dp->want_panel_vdd = false;
-
- if (sync)
- edp_panel_vdd_off_sync(intel_dp);
- else
- edp_panel_vdd_schedule_off(intel_dp);
-}
-
-static void edp_panel_on(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- u32 pp;
- i915_reg_t pp_ctrl_reg;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- if (!intel_dp_is_edp(intel_dp))
- return;
-
- drm_dbg_kms(&dev_priv->drm, "Turn [ENCODER:%d:%s] panel power on\n",
- dp_to_dig_port(intel_dp)->base.base.base.id,
- dp_to_dig_port(intel_dp)->base.base.name);
-
- if (drm_WARN(&dev_priv->drm, edp_have_panel_power(intel_dp),
- "[ENCODER:%d:%s] panel power already on\n",
- dp_to_dig_port(intel_dp)->base.base.base.id,
- dp_to_dig_port(intel_dp)->base.base.name))
- return;
-
- wait_panel_power_cycle(intel_dp);
-
- pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
- pp = ilk_get_pp_control(intel_dp);
- if (IS_GEN(dev_priv, 5)) {
- /* ILK workaround: disable reset around power sequence */
- pp &= ~PANEL_POWER_RESET;
- intel_de_write(dev_priv, pp_ctrl_reg, pp);
- intel_de_posting_read(dev_priv, pp_ctrl_reg);
- }
-
- pp |= PANEL_POWER_ON;
- if (!IS_GEN(dev_priv, 5))
- pp |= PANEL_POWER_RESET;
-
- intel_de_write(dev_priv, pp_ctrl_reg, pp);
- intel_de_posting_read(dev_priv, pp_ctrl_reg);
-
- wait_panel_on(intel_dp);
- intel_dp->last_power_on = jiffies;
-
- if (IS_GEN(dev_priv, 5)) {
- pp |= PANEL_POWER_RESET; /* restore panel reset bit */
- intel_de_write(dev_priv, pp_ctrl_reg, pp);
- intel_de_posting_read(dev_priv, pp_ctrl_reg);
- }
-}
-
-void intel_edp_panel_on(struct intel_dp *intel_dp)
-{
- intel_wakeref_t wakeref;
-
- if (!intel_dp_is_edp(intel_dp))
- return;
-
- with_pps_lock(intel_dp, wakeref)
- edp_panel_on(intel_dp);
-}
-
-
-static void edp_panel_off(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- u32 pp;
- i915_reg_t pp_ctrl_reg;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- if (!intel_dp_is_edp(intel_dp))
- return;
-
- drm_dbg_kms(&dev_priv->drm, "Turn [ENCODER:%d:%s] panel power off\n",
- dig_port->base.base.base.id, dig_port->base.base.name);
-
- drm_WARN(&dev_priv->drm, !intel_dp->want_panel_vdd,
- "Need [ENCODER:%d:%s] VDD to turn off panel\n",
- dig_port->base.base.base.id, dig_port->base.base.name);
-
- pp = ilk_get_pp_control(intel_dp);
- /* We need to switch off panel power _and_ force vdd, for otherwise some
- * panels get very unhappy and cease to work. */
- pp &= ~(PANEL_POWER_ON | PANEL_POWER_RESET | EDP_FORCE_VDD |
- EDP_BLC_ENABLE);
-
- pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
-
- intel_dp->want_panel_vdd = false;
+ *
+ * CPT PCH is quite different, having many bits moved
+ * to the TRANS_DP_CTL register instead. That
+ * configuration happens (oddly) in ilk_pch_enable
+ */
- intel_de_write(dev_priv, pp_ctrl_reg, pp);
- intel_de_posting_read(dev_priv, pp_ctrl_reg);
+ /* Preserve the BIOS-computed detected bit. This is
+ * supposed to be read-only.
+ */
+ intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg) & DP_DETECTED;
- wait_panel_off(intel_dp);
- intel_dp->panel_power_off_time = ktime_get_boottime();
+ /* Handle DP bits in common between all three register formats */
+ intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
+ intel_dp->DP |= DP_PORT_WIDTH(pipe_config->lane_count);
- /* We got a reference when we enabled the VDD. */
- intel_display_power_put(dev_priv,
- intel_aux_power_domain(dig_port),
- fetch_and_zero(&intel_dp->vdd_wakeref));
-}
+ /* Split out the IBX/CPU vs CPT settings */
-void intel_edp_panel_off(struct intel_dp *intel_dp)
-{
- intel_wakeref_t wakeref;
+ if (IS_IVYBRIDGE(dev_priv) && port == PORT_A) {
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+ intel_dp->DP |= DP_SYNC_HS_HIGH;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+ intel_dp->DP |= DP_SYNC_VS_HIGH;
+ intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
- if (!intel_dp_is_edp(intel_dp))
- return;
+ if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
+ intel_dp->DP |= DP_ENHANCED_FRAMING;
- with_pps_lock(intel_dp, wakeref)
- edp_panel_off(intel_dp);
-}
+ intel_dp->DP |= DP_PIPE_SEL_IVB(crtc->pipe);
+ } else if (HAS_PCH_CPT(dev_priv) && port != PORT_A) {
+ u32 trans_dp;
-/* Enable backlight in the panel power control. */
-static void _intel_edp_backlight_on(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- intel_wakeref_t wakeref;
+ intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
- /*
- * If we enable the backlight right away following a panel power
- * on, we may see slight flicker as the panel syncs with the eDP
- * link. So delay a bit to make sure the image is solid before
- * allowing it to appear.
- */
- wait_backlight_on(intel_dp);
+ trans_dp = intel_de_read(dev_priv, TRANS_DP_CTL(crtc->pipe));
+ if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
+ trans_dp |= TRANS_DP_ENH_FRAMING;
+ else
+ trans_dp &= ~TRANS_DP_ENH_FRAMING;
+ intel_de_write(dev_priv, TRANS_DP_CTL(crtc->pipe), trans_dp);
+ } else {
+ if (IS_G4X(dev_priv) && pipe_config->limited_color_range)
+ intel_dp->DP |= DP_COLOR_RANGE_16_235;
- with_pps_lock(intel_dp, wakeref) {
- i915_reg_t pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
- u32 pp;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+ intel_dp->DP |= DP_SYNC_HS_HIGH;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+ intel_dp->DP |= DP_SYNC_VS_HIGH;
+ intel_dp->DP |= DP_LINK_TRAIN_OFF;
- pp = ilk_get_pp_control(intel_dp);
- pp |= EDP_BLC_ENABLE;
+ if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
+ intel_dp->DP |= DP_ENHANCED_FRAMING;
- intel_de_write(dev_priv, pp_ctrl_reg, pp);
- intel_de_posting_read(dev_priv, pp_ctrl_reg);
+ if (IS_CHERRYVIEW(dev_priv))
+ intel_dp->DP |= DP_PIPE_SEL_CHV(crtc->pipe);
+ else
+ intel_dp->DP |= DP_PIPE_SEL(crtc->pipe);
}
}
+
/* Enable backlight PWM and backlight PP control. */
void intel_edp_backlight_on(const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
@@ -3432,30 +2566,6 @@ void intel_edp_backlight_on(const struct intel_crtc_state *crtc_state,
_intel_edp_backlight_on(intel_dp);
}
-/* Disable backlight in the panel power control. */
-static void _intel_edp_backlight_off(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- intel_wakeref_t wakeref;
-
- if (!intel_dp_is_edp(intel_dp))
- return;
-
- with_pps_lock(intel_dp, wakeref) {
- i915_reg_t pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
- u32 pp;
-
- pp = ilk_get_pp_control(intel_dp);
- pp &= ~EDP_BLC_ENABLE;
-
- intel_de_write(dev_priv, pp_ctrl_reg, pp);
- intel_de_posting_read(dev_priv, pp_ctrl_reg);
- }
-
- intel_dp->last_backlight_off = jiffies;
- edp_wait_backlight_off(intel_dp);
-}
-
/* Disable backlight PP control and backlight PWM. */
void intel_edp_backlight_off(const struct drm_connector_state *old_conn_state)
{
@@ -3471,33 +2581,6 @@ void intel_edp_backlight_off(const struct drm_connector_state *old_conn_state)
intel_panel_disable_backlight(old_conn_state);
}
-/*
- * Hook for controlling the panel power control backlight through the bl_power
- * sysfs attribute. Take care to handle multiple calls.
- */
-static void intel_edp_backlight_power(struct intel_connector *connector,
- bool enable)
-{
- struct drm_i915_private *i915 = to_i915(connector->base.dev);
- struct intel_dp *intel_dp = intel_attached_dp(connector);
- intel_wakeref_t wakeref;
- bool is_enabled;
-
- is_enabled = false;
- with_pps_lock(intel_dp, wakeref)
- is_enabled = ilk_get_pp_control(intel_dp) & EDP_BLC_ENABLE;
- if (is_enabled == enable)
- return;
-
- drm_dbg_kms(&i915->drm, "panel power control backlight %s\n",
- enable ? "enable" : "disable");
-
- if (enable)
- _intel_edp_backlight_on(intel_dp);
- else
- _intel_edp_backlight_off(intel_dp);
-}
-
static void assert_dp_port(struct intel_dp *intel_dp, bool state)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
@@ -4498,112 +3581,6 @@ static void g4x_pre_enable_dp(struct intel_atomic_state *state,
ilk_edp_pll_on(intel_dp, pipe_config);
}
-static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
-{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
- enum pipe pipe = intel_dp->pps_pipe;
- i915_reg_t pp_on_reg = PP_ON_DELAYS(pipe);
-
- drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE);
-
- if (drm_WARN_ON(&dev_priv->drm, pipe != PIPE_A && pipe != PIPE_B))
- return;
-
- edp_panel_vdd_off_sync(intel_dp);
-
- /*
- * VLV seems to get confused when multiple power sequencers
- * have the same port selected (even if only one has power/vdd
- * enabled). The failure manifests as vlv_wait_port_ready() failing
- * CHV on the other hand doesn't seem to mind having the same port
- * selected in multiple power sequencers, but let's clear the
- * port select always when logically disconnecting a power sequencer
- * from a port.
- */
- drm_dbg_kms(&dev_priv->drm,
- "detaching pipe %c power sequencer from [ENCODER:%d:%s]\n",
- pipe_name(pipe), dig_port->base.base.base.id,
- dig_port->base.base.name);
- intel_de_write(dev_priv, pp_on_reg, 0);
- intel_de_posting_read(dev_priv, pp_on_reg);
-
- intel_dp->pps_pipe = INVALID_PIPE;
-}
-
-static void vlv_steal_power_sequencer(struct drm_i915_private *dev_priv,
- enum pipe pipe)
-{
- struct intel_encoder *encoder;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- for_each_intel_dp(&dev_priv->drm, encoder) {
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-
- drm_WARN(&dev_priv->drm, intel_dp->active_pipe == pipe,
- "stealing pipe %c power sequencer from active [ENCODER:%d:%s]\n",
- pipe_name(pipe), encoder->base.base.id,
- encoder->base.name);
-
- if (intel_dp->pps_pipe != pipe)
- continue;
-
- drm_dbg_kms(&dev_priv->drm,
- "stealing pipe %c power sequencer from [ENCODER:%d:%s]\n",
- pipe_name(pipe), encoder->base.base.id,
- encoder->base.name);
-
- /* make sure vdd is off before we steal it */
- vlv_detach_power_sequencer(intel_dp);
- }
-}
-
-static void vlv_init_panel_power_sequencer(struct intel_encoder *encoder,
- const struct intel_crtc_state *crtc_state)
-{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE);
-
- if (intel_dp->pps_pipe != INVALID_PIPE &&
- intel_dp->pps_pipe != crtc->pipe) {
- /*
- * If another power sequencer was being used on this
- * port previously make sure to turn off vdd there while
- * we still have control of it.
- */
- vlv_detach_power_sequencer(intel_dp);
- }
-
- /*
- * We may be stealing the power
- * sequencer from another port.
- */
- vlv_steal_power_sequencer(dev_priv, crtc->pipe);
-
- intel_dp->active_pipe = crtc->pipe;
-
- if (!intel_dp_is_edp(intel_dp))
- return;
-
- /* now it's all ours */
- intel_dp->pps_pipe = crtc->pipe;
-
- drm_dbg_kms(&dev_priv->drm,
- "initializing pipe %c power sequencer for [ENCODER:%d:%s]\n",
- pipe_name(intel_dp->pps_pipe), encoder->base.base.id,
- encoder->base.name);
-
- /* init power sequencer on this pipe and port */
- intel_dp_init_panel_power_sequencer(intel_dp);
- intel_dp_init_panel_power_sequencer_registers(intel_dp, true);
-}
-
static void vlv_pre_enable_dp(struct intel_atomic_state *state,
struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
@@ -7324,31 +6301,6 @@ void intel_dp_encoder_shutdown(struct intel_encoder *intel_encoder)
wait_panel_power_cycle(intel_dp);
}
-static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- if (!edp_have_panel_vdd(intel_dp))
- return;
-
- /*
- * The VDD bit needs a power domain reference, so if the bit is
- * already enabled when we boot or resume, grab this reference and
- * schedule a vdd off, so we don't hold on to the reference
- * indefinitely.
- */
- drm_dbg_kms(&dev_priv->drm,
- "VDD left on by BIOS, adjusting state tracking\n");
- drm_WARN_ON(&dev_priv->drm, intel_dp->vdd_wakeref);
- intel_dp->vdd_wakeref = intel_display_power_get(dev_priv,
- intel_aux_power_domain(dig_port));
-
- edp_panel_vdd_schedule_off(intel_dp);
-}
-
static enum pipe vlv_active_pipe(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
@@ -7554,19 +6506,6 @@ static const struct drm_encoder_funcs intel_dp_enc_funcs = {
.destroy = intel_dp_encoder_destroy,
};
-static bool intel_edp_have_power(struct intel_dp *intel_dp)
-{
- intel_wakeref_t wakeref;
- bool have_power = false;
-
- with_pps_lock(intel_dp, wakeref) {
- have_power = edp_have_panel_power(intel_dp) &&
- edp_have_panel_vdd(intel_dp);
- }
-
- return have_power;
-}
-
enum irqreturn
intel_dp_hpd_pulse(struct intel_digital_port *dig_port, bool long_hpd)
{
@@ -7670,277 +6609,6 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
}
}
-static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
-{
- intel_dp->panel_power_off_time = ktime_get_boottime();
- intel_dp->last_power_on = jiffies;
- intel_dp->last_backlight_off = jiffies;
-}
-
-static void
-intel_pps_readout_hw_state(struct intel_dp *intel_dp, struct edp_power_seq *seq)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- u32 pp_on, pp_off, pp_ctl;
- struct pps_registers regs;
-
- intel_pps_get_registers(intel_dp, ®s);
-
- pp_ctl = ilk_get_pp_control(intel_dp);
-
- /* Ensure PPS is unlocked */
- if (!HAS_DDI(dev_priv))
- intel_de_write(dev_priv, regs.pp_ctrl, pp_ctl);
-
- pp_on = intel_de_read(dev_priv, regs.pp_on);
- pp_off = intel_de_read(dev_priv, regs.pp_off);
-
- /* Pull timing values out of registers */
- seq->t1_t3 = REG_FIELD_GET(PANEL_POWER_UP_DELAY_MASK, pp_on);
- seq->t8 = REG_FIELD_GET(PANEL_LIGHT_ON_DELAY_MASK, pp_on);
- seq->t9 = REG_FIELD_GET(PANEL_LIGHT_OFF_DELAY_MASK, pp_off);
- seq->t10 = REG_FIELD_GET(PANEL_POWER_DOWN_DELAY_MASK, pp_off);
-
- if (i915_mmio_reg_valid(regs.pp_div)) {
- u32 pp_div;
-
- pp_div = intel_de_read(dev_priv, regs.pp_div);
-
- seq->t11_t12 = REG_FIELD_GET(PANEL_POWER_CYCLE_DELAY_MASK, pp_div) * 1000;
- } else {
- seq->t11_t12 = REG_FIELD_GET(BXT_POWER_CYCLE_DELAY_MASK, pp_ctl) * 1000;
- }
-}
-
-static void
-intel_pps_dump_state(const char *state_name, const struct edp_power_seq *seq)
-{
- DRM_DEBUG_KMS("%s t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
- state_name,
- seq->t1_t3, seq->t8, seq->t9, seq->t10, seq->t11_t12);
-}
-
-static void
-intel_pps_verify_state(struct intel_dp *intel_dp)
-{
- struct edp_power_seq hw;
- struct edp_power_seq *sw = &intel_dp->pps_delays;
-
- intel_pps_readout_hw_state(intel_dp, &hw);
-
- if (hw.t1_t3 != sw->t1_t3 || hw.t8 != sw->t8 || hw.t9 != sw->t9 ||
- hw.t10 != sw->t10 || hw.t11_t12 != sw->t11_t12) {
- DRM_ERROR("PPS state mismatch\n");
- intel_pps_dump_state("sw", sw);
- intel_pps_dump_state("hw", &hw);
- }
-}
-
-static void
-intel_dp_init_panel_power_sequencer(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- struct edp_power_seq cur, vbt, spec,
- *final = &intel_dp->pps_delays;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- /* already initialized? */
- if (final->t11_t12 != 0)
- return;
-
- intel_pps_readout_hw_state(intel_dp, &cur);
-
- intel_pps_dump_state("cur", &cur);
-
- vbt = dev_priv->vbt.edp.pps;
- /* On Toshiba Satellite P50-C-18C system the VBT T12 delay
- * of 500ms appears to be too short. Ocassionally the panel
- * just fails to power back on. Increasing the delay to 800ms
- * seems sufficient to avoid this problem.
- */
- if (dev_priv->quirks & QUIRK_INCREASE_T12_DELAY) {
- vbt.t11_t12 = max_t(u16, vbt.t11_t12, 1300 * 10);
- drm_dbg_kms(&dev_priv->drm,
- "Increasing T12 panel delay as per the quirk to %d\n",
- vbt.t11_t12);
- }
- /* T11_T12 delay is special and actually in units of 100ms, but zero
- * based in the hw (so we need to add 100 ms). But the sw vbt
- * table multiplies it with 1000 to make it in units of 100usec,
- * too. */
- vbt.t11_t12 += 100 * 10;
-
- /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
- * our hw here, which are all in 100usec. */
- spec.t1_t3 = 210 * 10;
- spec.t8 = 50 * 10; /* no limit for t8, use t7 instead */
- spec.t9 = 50 * 10; /* no limit for t9, make it symmetric with t8 */
- spec.t10 = 500 * 10;
- /* This one is special and actually in units of 100ms, but zero
- * based in the hw (so we need to add 100 ms). But the sw vbt
- * table multiplies it with 1000 to make it in units of 100usec,
- * too. */
- spec.t11_t12 = (510 + 100) * 10;
-
- intel_pps_dump_state("vbt", &vbt);
-
- /* Use the max of the register settings and vbt. If both are
- * unset, fall back to the spec limits. */
-#define assign_final(field) final->field = (max(cur.field, vbt.field) == 0 ? \
- spec.field : \
- max(cur.field, vbt.field))
- assign_final(t1_t3);
- assign_final(t8);
- assign_final(t9);
- assign_final(t10);
- assign_final(t11_t12);
-#undef assign_final
-
-#define get_delay(field) (DIV_ROUND_UP(final->field, 10))
- intel_dp->panel_power_up_delay = get_delay(t1_t3);
- intel_dp->backlight_on_delay = get_delay(t8);
- intel_dp->backlight_off_delay = get_delay(t9);
- intel_dp->panel_power_down_delay = get_delay(t10);
- intel_dp->panel_power_cycle_delay = get_delay(t11_t12);
-#undef get_delay
-
- drm_dbg_kms(&dev_priv->drm,
- "panel power up delay %d, power down delay %d, power cycle delay %d\n",
- intel_dp->panel_power_up_delay,
- intel_dp->panel_power_down_delay,
- intel_dp->panel_power_cycle_delay);
-
- drm_dbg_kms(&dev_priv->drm, "backlight on delay %d, off delay %d\n",
- intel_dp->backlight_on_delay,
- intel_dp->backlight_off_delay);
-
- /*
- * We override the HW backlight delays to 1 because we do manual waits
- * on them. For T8, even BSpec recommends doing it. For T9, if we
- * don't do this, we'll end up waiting for the backlight off delay
- * twice: once when we do the manual sleep, and once when we disable
- * the panel and wait for the PP_STATUS bit to become zero.
- */
- final->t8 = 1;
- final->t9 = 1;
-
- /*
- * HW has only a 100msec granularity for t11_t12 so round it up
- * accordingly.
- */
- final->t11_t12 = roundup(final->t11_t12, 100 * 10);
-}
-
-static void
-intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
- bool force_disable_vdd)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- u32 pp_on, pp_off, port_sel = 0;
- int div = RUNTIME_INFO(dev_priv)->rawclk_freq / 1000;
- struct pps_registers regs;
- enum port port = dp_to_dig_port(intel_dp)->base.port;
- const struct edp_power_seq *seq = &intel_dp->pps_delays;
-
- lockdep_assert_held(&dev_priv->pps_mutex);
-
- intel_pps_get_registers(intel_dp, ®s);
-
- /*
- * On some VLV machines the BIOS can leave the VDD
- * enabled even on power sequencers which aren't
- * hooked up to any port. This would mess up the
- * power domain tracking the first time we pick
- * one of these power sequencers for use since
- * edp_panel_vdd_on() would notice that the VDD was
- * already on and therefore wouldn't grab the power
- * domain reference. Disable VDD first to avoid this.
- * This also avoids spuriously turning the VDD on as
- * soon as the new power sequencer gets initialized.
- */
- if (force_disable_vdd) {
- u32 pp = ilk_get_pp_control(intel_dp);
-
- drm_WARN(&dev_priv->drm, pp & PANEL_POWER_ON,
- "Panel power already on\n");
-
- if (pp & EDP_FORCE_VDD)
- drm_dbg_kms(&dev_priv->drm,
- "VDD already on, disabling first\n");
-
- pp &= ~EDP_FORCE_VDD;
-
- intel_de_write(dev_priv, regs.pp_ctrl, pp);
- }
-
- pp_on = REG_FIELD_PREP(PANEL_POWER_UP_DELAY_MASK, seq->t1_t3) |
- REG_FIELD_PREP(PANEL_LIGHT_ON_DELAY_MASK, seq->t8);
- pp_off = REG_FIELD_PREP(PANEL_LIGHT_OFF_DELAY_MASK, seq->t9) |
- REG_FIELD_PREP(PANEL_POWER_DOWN_DELAY_MASK, seq->t10);
-
- /* Haswell doesn't have any port selection bits for the panel
- * power sequencer any more. */
- if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
- port_sel = PANEL_PORT_SELECT_VLV(port);
- } else if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)) {
- switch (port) {
- case PORT_A:
- port_sel = PANEL_PORT_SELECT_DPA;
- break;
- case PORT_C:
- port_sel = PANEL_PORT_SELECT_DPC;
- break;
- case PORT_D:
- port_sel = PANEL_PORT_SELECT_DPD;
- break;
- default:
- MISSING_CASE(port);
- break;
- }
- }
-
- pp_on |= port_sel;
-
- intel_de_write(dev_priv, regs.pp_on, pp_on);
- intel_de_write(dev_priv, regs.pp_off, pp_off);
-
- /*
- * Compute the divisor for the pp clock, simply match the Bspec formula.
- */
- if (i915_mmio_reg_valid(regs.pp_div)) {
- intel_de_write(dev_priv, regs.pp_div,
- REG_FIELD_PREP(PP_REFERENCE_DIVIDER_MASK, (100 * div) / 2 - 1) | REG_FIELD_PREP(PANEL_POWER_CYCLE_DELAY_MASK, DIV_ROUND_UP(seq->t11_t12, 1000)));
- } else {
- u32 pp_ctl;
-
- pp_ctl = intel_de_read(dev_priv, regs.pp_ctrl);
- pp_ctl &= ~BXT_POWER_CYCLE_DELAY_MASK;
- pp_ctl |= REG_FIELD_PREP(BXT_POWER_CYCLE_DELAY_MASK, DIV_ROUND_UP(seq->t11_t12, 1000));
- intel_de_write(dev_priv, regs.pp_ctrl, pp_ctl);
- }
-
- drm_dbg_kms(&dev_priv->drm,
- "panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
- intel_de_read(dev_priv, regs.pp_on),
- intel_de_read(dev_priv, regs.pp_off),
- i915_mmio_reg_valid(regs.pp_div) ?
- intel_de_read(dev_priv, regs.pp_div) :
- (intel_de_read(dev_priv, regs.pp_ctrl) & BXT_POWER_CYCLE_DELAY_MASK));
-}
-
-static void intel_dp_pps_init(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
- vlv_initial_power_sequencer_setup(intel_dp);
- } else {
- intel_dp_init_panel_power_sequencer(intel_dp);
- intel_dp_init_panel_power_sequencer_registers(intel_dp, false);
- }
-}
-
/**
* intel_dp_set_drrs_state - program registers for RR switch to take effect
* @dev_priv: i915 device
diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
index 4280a09fd8fd..d07bcdee9639 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -70,15 +70,11 @@ enum irqreturn intel_dp_hpd_pulse(struct intel_digital_port *dig_port,
void intel_edp_backlight_on(const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state);
void intel_edp_backlight_off(const struct drm_connector_state *conn_state);
-void intel_edp_panel_vdd_on(struct intel_dp *intel_dp);
-void intel_edp_panel_on(struct intel_dp *intel_dp);
-void intel_edp_panel_off(struct intel_dp *intel_dp);
void intel_dp_mst_suspend(struct drm_i915_private *dev_priv);
void intel_dp_mst_resume(struct drm_i915_private *dev_priv);
int intel_dp_max_link_rate(struct intel_dp *intel_dp);
int intel_dp_max_lane_count(struct intel_dp *intel_dp);
int intel_dp_rate_select(struct intel_dp *intel_dp, int rate);
-void intel_power_sequencer_reset(struct drm_i915_private *dev_priv);
u32 intel_dp_pack_aux(const u8 *src, int src_bytes);
void intel_edp_drrs_enable(struct intel_dp *intel_dp,
@@ -144,6 +140,7 @@ bool intel_dp_initial_fastset_check(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state);
void intel_dp_sync_state(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state);
+const struct dpll *vlv_get_dpll(struct drm_i915_private *i915);
void intel_dp_check_frl_training(struct intel_dp *intel_dp);
void intel_dp_pcon_dsc_configure(struct intel_dp *intel_dp,
diff --git a/drivers/gpu/drm/i915/display/intel_pps.c b/drivers/gpu/drm/i915/display/intel_pps.c
new file mode 100644
index 000000000000..83bd83b3e3c4
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_pps.c
@@ -0,0 +1,1334 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#include "i915_drv.h"
+#include "intel_display_types.h"
+#include "intel_dp.h"
+#include "intel_pps.h"
+
+static void vlv_steal_power_sequencer(struct drm_i915_private *dev_priv,
+ enum pipe pipe);
+static void
+intel_dp_init_panel_power_sequencer(struct intel_dp *intel_dp);
+static void
+intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
+ bool force_disable_vdd);
+
+intel_wakeref_t pps_lock(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ intel_wakeref_t wakeref;
+
+ /*
+ * See intel_power_sequencer_reset() why we need
+ * a power domain reference here.
+ */
+ wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE);
+ mutex_lock(&dev_priv->pps_mutex);
+
+ return wakeref;
+}
+
+intel_wakeref_t pps_unlock(struct intel_dp *intel_dp, intel_wakeref_t wakeref)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ mutex_unlock(&dev_priv->pps_mutex);
+ intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
+
+ return 0;
+}
+
+static void
+vlv_power_sequencer_kick(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ enum pipe pipe = intel_dp->pps_pipe;
+ bool pll_enabled, release_cl_override = false;
+ enum dpio_phy phy = DPIO_PHY(pipe);
+ enum dpio_channel ch = vlv_pipe_to_channel(pipe);
+ u32 DP;
+
+ if (drm_WARN(&dev_priv->drm,
+ intel_de_read(dev_priv, intel_dp->output_reg) & DP_PORT_EN,
+ "skipping pipe %c power sequencer kick due to [ENCODER:%d:%s] being active\n",
+ pipe_name(pipe), dig_port->base.base.base.id,
+ dig_port->base.base.name))
+ return;
+
+ drm_dbg_kms(&dev_priv->drm,
+ "kicking pipe %c power sequencer for [ENCODER:%d:%s]\n",
+ pipe_name(pipe), dig_port->base.base.base.id,
+ dig_port->base.base.name);
+
+ /* Preserve the BIOS-computed detected bit. This is
+ * supposed to be read-only.
+ */
+ DP = intel_de_read(dev_priv, intel_dp->output_reg) & DP_DETECTED;
+ DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
+ DP |= DP_PORT_WIDTH(1);
+ DP |= DP_LINK_TRAIN_PAT_1;
+
+ if (IS_CHERRYVIEW(dev_priv))
+ DP |= DP_PIPE_SEL_CHV(pipe);
+ else
+ DP |= DP_PIPE_SEL(pipe);
+
+ pll_enabled = intel_de_read(dev_priv, DPLL(pipe)) & DPLL_VCO_ENABLE;
+
+ /*
+ * The DPLL for the pipe must be enabled for this to work.
+ * So enable temporarily it if it's not already enabled.
+ */
+ if (!pll_enabled) {
+ release_cl_override = IS_CHERRYVIEW(dev_priv) &&
+ !chv_phy_powergate_ch(dev_priv, phy, ch, true);
+
+ if (vlv_force_pll_on(dev_priv, pipe, vlv_get_dpll(dev_priv))) {
+ drm_err(&dev_priv->drm,
+ "Failed to force on pll for pipe %c!\n",
+ pipe_name(pipe));
+ return;
+ }
+ }
+
+ /*
+ * Similar magic as in intel_dp_enable_port().
+ * We _must_ do this port enable + disable trick
+ * to make this power sequencer lock onto the port.
+ * Otherwise even VDD force bit won't work.
+ */
+ intel_de_write(dev_priv, intel_dp->output_reg, DP);
+ intel_de_posting_read(dev_priv, intel_dp->output_reg);
+
+ intel_de_write(dev_priv, intel_dp->output_reg, DP | DP_PORT_EN);
+ intel_de_posting_read(dev_priv, intel_dp->output_reg);
+
+ intel_de_write(dev_priv, intel_dp->output_reg, DP & ~DP_PORT_EN);
+ intel_de_posting_read(dev_priv, intel_dp->output_reg);
+
+ if (!pll_enabled) {
+ vlv_force_pll_off(dev_priv, pipe);
+
+ if (release_cl_override)
+ chv_phy_powergate_ch(dev_priv, phy, ch, false);
+ }
+}
+
+static enum pipe vlv_find_free_pps(struct drm_i915_private *dev_priv)
+{
+ struct intel_encoder *encoder;
+ unsigned int pipes = (1 << PIPE_A) | (1 << PIPE_B);
+
+ /*
+ * We don't have power sequencer currently.
+ * Pick one that's not used by other ports.
+ */
+ for_each_intel_dp(&dev_priv->drm, encoder) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ if (encoder->type == INTEL_OUTPUT_EDP) {
+ drm_WARN_ON(&dev_priv->drm,
+ intel_dp->active_pipe != INVALID_PIPE &&
+ intel_dp->active_pipe !=
+ intel_dp->pps_pipe);
+
+ if (intel_dp->pps_pipe != INVALID_PIPE)
+ pipes &= ~(1 << intel_dp->pps_pipe);
+ } else {
+ drm_WARN_ON(&dev_priv->drm,
+ intel_dp->pps_pipe != INVALID_PIPE);
+
+ if (intel_dp->active_pipe != INVALID_PIPE)
+ pipes &= ~(1 << intel_dp->active_pipe);
+ }
+ }
+
+ if (pipes == 0)
+ return INVALID_PIPE;
+
+ return ffs(pipes) - 1;
+}
+
+static enum pipe
+vlv_power_sequencer_pipe(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ enum pipe pipe;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ /* We should never land here with regular DP ports */
+ drm_WARN_ON(&dev_priv->drm, !intel_dp_is_edp(intel_dp));
+
+ drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE &&
+ intel_dp->active_pipe != intel_dp->pps_pipe);
+
+ if (intel_dp->pps_pipe != INVALID_PIPE)
+ return intel_dp->pps_pipe;
+
+ pipe = vlv_find_free_pps(dev_priv);
+
+ /*
+ * Didn't find one. This should not happen since there
+ * are two power sequencers and up to two eDP ports.
+ */
+ if (drm_WARN_ON(&dev_priv->drm, pipe == INVALID_PIPE))
+ pipe = PIPE_A;
+
+ vlv_steal_power_sequencer(dev_priv, pipe);
+ intel_dp->pps_pipe = pipe;
+
+ drm_dbg_kms(&dev_priv->drm,
+ "picked pipe %c power sequencer for [ENCODER:%d:%s]\n",
+ pipe_name(intel_dp->pps_pipe),
+ dig_port->base.base.base.id,
+ dig_port->base.base.name);
+
+ /* init power sequencer on this pipe and port */
+ intel_dp_init_panel_power_sequencer(intel_dp);
+ intel_dp_init_panel_power_sequencer_registers(intel_dp, true);
+
+ /*
+ * Even vdd force doesn't work until we've made
+ * the power sequencer lock in on the port.
+ */
+ vlv_power_sequencer_kick(intel_dp);
+
+ return intel_dp->pps_pipe;
+}
+
+static int
+bxt_power_sequencer_idx(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ int backlight_controller = dev_priv->vbt.backlight.controller;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ /* We should never land here with regular DP ports */
+ drm_WARN_ON(&dev_priv->drm, !intel_dp_is_edp(intel_dp));
+
+ if (!intel_dp->pps_reset)
+ return backlight_controller;
+
+ intel_dp->pps_reset = false;
+
+ /*
+ * Only the HW needs to be reprogrammed, the SW state is fixed and
+ * has been setup during connector init.
+ */
+ intel_dp_init_panel_power_sequencer_registers(intel_dp, false);
+
+ return backlight_controller;
+}
+
+typedef bool (*vlv_pipe_check)(struct drm_i915_private *dev_priv,
+ enum pipe pipe);
+
+static bool vlv_pipe_has_pp_on(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ return intel_de_read(dev_priv, PP_STATUS(pipe)) & PP_ON;
+}
+
+static bool vlv_pipe_has_vdd_on(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ return intel_de_read(dev_priv, PP_CONTROL(pipe)) & EDP_FORCE_VDD;
+}
+
+static bool vlv_pipe_any(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ return true;
+}
+
+static enum pipe
+vlv_initial_pps_pipe(struct drm_i915_private *dev_priv,
+ enum port port,
+ vlv_pipe_check pipe_check)
+{
+ enum pipe pipe;
+
+ for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) {
+ u32 port_sel = intel_de_read(dev_priv, PP_ON_DELAYS(pipe)) &
+ PANEL_PORT_SELECT_MASK;
+
+ if (port_sel != PANEL_PORT_SELECT_VLV(port))
+ continue;
+
+ if (!pipe_check(dev_priv, pipe))
+ continue;
+
+ return pipe;
+ }
+
+ return INVALID_PIPE;
+}
+
+static void
+vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ enum port port = dig_port->base.port;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ /* try to find a pipe with this port selected */
+ /* first pick one where the panel is on */
+ intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
+ vlv_pipe_has_pp_on);
+ /* didn't find one? pick one where vdd is on */
+ if (intel_dp->pps_pipe == INVALID_PIPE)
+ intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
+ vlv_pipe_has_vdd_on);
+ /* didn't find one? pick one with just the correct port */
+ if (intel_dp->pps_pipe == INVALID_PIPE)
+ intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port,
+ vlv_pipe_any);
+
+ /* didn't find one? just let vlv_power_sequencer_pipe() pick one when needed */
+ if (intel_dp->pps_pipe == INVALID_PIPE) {
+ drm_dbg_kms(&dev_priv->drm,
+ "no initial power sequencer for [ENCODER:%d:%s]\n",
+ dig_port->base.base.base.id,
+ dig_port->base.base.name);
+ return;
+ }
+
+ drm_dbg_kms(&dev_priv->drm,
+ "initial power sequencer for [ENCODER:%d:%s]: pipe %c\n",
+ dig_port->base.base.base.id,
+ dig_port->base.base.name,
+ pipe_name(intel_dp->pps_pipe));
+
+ intel_dp_init_panel_power_sequencer(intel_dp);
+ intel_dp_init_panel_power_sequencer_registers(intel_dp, false);
+}
+
+void intel_power_sequencer_reset(struct drm_i915_private *dev_priv)
+{
+ struct intel_encoder *encoder;
+
+ if (drm_WARN_ON(&dev_priv->drm,
+ !(IS_VALLEYVIEW(dev_priv) ||
+ IS_CHERRYVIEW(dev_priv) ||
+ IS_GEN9_LP(dev_priv))))
+ return;
+
+ /*
+ * We can't grab pps_mutex here due to deadlock with power_domain
+ * mutex when power_domain functions are called while holding pps_mutex.
+ * That also means that in order to use pps_pipe the code needs to
+ * hold both a power domain reference and pps_mutex, and the power domain
+ * reference get/put must be done while _not_ holding pps_mutex.
+ * pps_{lock,unlock}() do these steps in the correct order, so one
+ * should use them always.
+ */
+
+ for_each_intel_dp(&dev_priv->drm, encoder) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ drm_WARN_ON(&dev_priv->drm,
+ intel_dp->active_pipe != INVALID_PIPE);
+
+ if (encoder->type != INTEL_OUTPUT_EDP)
+ continue;
+
+ if (IS_GEN9_LP(dev_priv))
+ intel_dp->pps_reset = true;
+ else
+ intel_dp->pps_pipe = INVALID_PIPE;
+ }
+}
+
+struct pps_registers {
+ i915_reg_t pp_ctrl;
+ i915_reg_t pp_stat;
+ i915_reg_t pp_on;
+ i915_reg_t pp_off;
+ i915_reg_t pp_div;
+};
+
+static void intel_pps_get_registers(struct intel_dp *intel_dp,
+ struct pps_registers *regs)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ int pps_idx = 0;
+
+ memset(regs, 0, sizeof(*regs));
+
+ if (IS_GEN9_LP(dev_priv))
+ pps_idx = bxt_power_sequencer_idx(intel_dp);
+ else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+ pps_idx = vlv_power_sequencer_pipe(intel_dp);
+
+ regs->pp_ctrl = PP_CONTROL(pps_idx);
+ regs->pp_stat = PP_STATUS(pps_idx);
+ regs->pp_on = PP_ON_DELAYS(pps_idx);
+ regs->pp_off = PP_OFF_DELAYS(pps_idx);
+
+ /* Cycle delay moved from PP_DIVISOR to PP_CONTROL */
+ if (IS_GEN9_LP(dev_priv) || INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
+ regs->pp_div = INVALID_MMIO_REG;
+ else
+ regs->pp_div = PP_DIVISOR(pps_idx);
+}
+
+static i915_reg_t
+_pp_ctrl_reg(struct intel_dp *intel_dp)
+{
+ struct pps_registers regs;
+
+ intel_pps_get_registers(intel_dp, ®s);
+
+ return regs.pp_ctrl;
+}
+
+static i915_reg_t
+_pp_stat_reg(struct intel_dp *intel_dp)
+{
+ struct pps_registers regs;
+
+ intel_pps_get_registers(intel_dp, ®s);
+
+ return regs.pp_stat;
+}
+
+static bool edp_have_panel_power(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
+ intel_dp->pps_pipe == INVALID_PIPE)
+ return false;
+
+ return (intel_de_read(dev_priv, _pp_stat_reg(intel_dp)) & PP_ON) != 0;
+}
+
+static bool edp_have_panel_vdd(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
+ intel_dp->pps_pipe == INVALID_PIPE)
+ return false;
+
+ return intel_de_read(dev_priv, _pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD;
+}
+
+void intel_dp_check_edp(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ if (!intel_dp_is_edp(intel_dp))
+ return;
+
+ if (!edp_have_panel_power(intel_dp) && !edp_have_panel_vdd(intel_dp)) {
+ drm_WARN(&dev_priv->drm, 1,
+ "eDP powered off while attempting aux channel communication.\n");
+ drm_dbg_kms(&dev_priv->drm, "Status 0x%08x Control 0x%08x\n",
+ intel_de_read(dev_priv, _pp_stat_reg(intel_dp)),
+ intel_de_read(dev_priv, _pp_ctrl_reg(intel_dp)));
+ }
+}
+
+#define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
+#define IDLE_ON_VALUE (PP_ON | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE)
+
+#define IDLE_OFF_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | 0)
+#define IDLE_OFF_VALUE (0 | PP_SEQUENCE_NONE | 0 | 0)
+
+#define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK)
+#define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE)
+
+static void intel_pps_verify_state(struct intel_dp *intel_dp);
+
+static void wait_panel_status(struct intel_dp *intel_dp,
+ u32 mask,
+ u32 value)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ i915_reg_t pp_stat_reg, pp_ctrl_reg;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ intel_pps_verify_state(intel_dp);
+
+ pp_stat_reg = _pp_stat_reg(intel_dp);
+ pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
+
+ drm_dbg_kms(&dev_priv->drm,
+ "mask %08x value %08x status %08x control %08x\n",
+ mask, value,
+ intel_de_read(dev_priv, pp_stat_reg),
+ intel_de_read(dev_priv, pp_ctrl_reg));
+
+ if (intel_de_wait_for_register(dev_priv, pp_stat_reg,
+ mask, value, 5000))
+ drm_err(&dev_priv->drm,
+ "Panel status timeout: status %08x control %08x\n",
+ intel_de_read(dev_priv, pp_stat_reg),
+ intel_de_read(dev_priv, pp_ctrl_reg));
+
+ drm_dbg_kms(&dev_priv->drm, "Wait complete\n");
+}
+
+static void wait_panel_on(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+
+ drm_dbg_kms(&i915->drm, "Wait for panel power on\n");
+ wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE);
+}
+
+static void wait_panel_off(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+
+ drm_dbg_kms(&i915->drm, "Wait for panel power off time\n");
+ wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE);
+}
+
+void wait_panel_power_cycle(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+ ktime_t panel_power_on_time;
+ s64 panel_power_off_duration;
+
+ drm_dbg_kms(&i915->drm, "Wait for panel power cycle\n");
+
+ /* take the difference of currrent time and panel power off time
+ * and then make panel wait for t11_t12 if needed. */
+ panel_power_on_time = ktime_get_boottime();
+ panel_power_off_duration = ktime_ms_delta(panel_power_on_time, intel_dp->panel_power_off_time);
+
+ /* When we disable the VDD override bit last we have to do the manual
+ * wait. */
+ if (panel_power_off_duration < (s64)intel_dp->panel_power_cycle_delay)
+ wait_remaining_ms_from_jiffies(jiffies,
+ intel_dp->panel_power_cycle_delay - panel_power_off_duration);
+
+ wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
+}
+
+static void wait_backlight_on(struct intel_dp *intel_dp)
+{
+ wait_remaining_ms_from_jiffies(intel_dp->last_power_on,
+ intel_dp->backlight_on_delay);
+}
+
+static void edp_wait_backlight_off(struct intel_dp *intel_dp)
+{
+ wait_remaining_ms_from_jiffies(intel_dp->last_backlight_off,
+ intel_dp->backlight_off_delay);
+}
+
+/* Read the current pp_control value, unlocking the register if it
+ * is locked
+ */
+
+static u32 ilk_get_pp_control(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ u32 control;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ control = intel_de_read(dev_priv, _pp_ctrl_reg(intel_dp));
+ if (drm_WARN_ON(&dev_priv->drm, !HAS_DDI(dev_priv) &&
+ (control & PANEL_UNLOCK_MASK) != PANEL_UNLOCK_REGS)) {
+ control &= ~PANEL_UNLOCK_MASK;
+ control |= PANEL_UNLOCK_REGS;
+ }
+ return control;
+}
+
+/*
+ * Must be paired with edp_panel_vdd_off().
+ * Must hold pps_mutex around the whole on/off sequence.
+ * Can be nested with intel_edp_panel_vdd_{on,off}() calls.
+ */
+bool edp_panel_vdd_on(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ u32 pp;
+ i915_reg_t pp_stat_reg, pp_ctrl_reg;
+ bool need_to_disable = !intel_dp->want_panel_vdd;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ if (!intel_dp_is_edp(intel_dp))
+ return false;
+
+ cancel_delayed_work(&intel_dp->panel_vdd_work);
+ intel_dp->want_panel_vdd = true;
+
+ if (edp_have_panel_vdd(intel_dp))
+ return need_to_disable;
+
+ drm_WARN_ON(&dev_priv->drm, intel_dp->vdd_wakeref);
+ intel_dp->vdd_wakeref = intel_display_power_get(dev_priv,
+ intel_aux_power_domain(dig_port));
+
+ drm_dbg_kms(&dev_priv->drm, "Turning [ENCODER:%d:%s] VDD on\n",
+ dig_port->base.base.base.id,
+ dig_port->base.base.name);
+
+ if (!edp_have_panel_power(intel_dp))
+ wait_panel_power_cycle(intel_dp);
+
+ pp = ilk_get_pp_control(intel_dp);
+ pp |= EDP_FORCE_VDD;
+
+ pp_stat_reg = _pp_stat_reg(intel_dp);
+ pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
+
+ intel_de_write(dev_priv, pp_ctrl_reg, pp);
+ intel_de_posting_read(dev_priv, pp_ctrl_reg);
+ drm_dbg_kms(&dev_priv->drm, "PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
+ intel_de_read(dev_priv, pp_stat_reg),
+ intel_de_read(dev_priv, pp_ctrl_reg));
+ /*
+ * If the panel wasn't on, delay before accessing aux channel
+ */
+ if (!edp_have_panel_power(intel_dp)) {
+ drm_dbg_kms(&dev_priv->drm,
+ "[ENCODER:%d:%s] panel power wasn't enabled\n",
+ dig_port->base.base.base.id,
+ dig_port->base.base.name);
+ msleep(intel_dp->panel_power_up_delay);
+ }
+
+ return need_to_disable;
+}
+
+/*
+ * Must be paired with intel_edp_panel_vdd_off() or
+ * intel_edp_panel_off().
+ * Nested calls to these functions are not allowed since
+ * we drop the lock. Caller must use some higher level
+ * locking to prevent nested calls from other threads.
+ */
+void intel_edp_panel_vdd_on(struct intel_dp *intel_dp)
+{
+ intel_wakeref_t wakeref;
+ bool vdd;
+
+ if (!intel_dp_is_edp(intel_dp))
+ return;
+
+ vdd = false;
+ with_pps_lock(intel_dp, wakeref)
+ vdd = edp_panel_vdd_on(intel_dp);
+ I915_STATE_WARN(!vdd, "[ENCODER:%d:%s] VDD already requested on\n",
+ dp_to_dig_port(intel_dp)->base.base.base.id,
+ dp_to_dig_port(intel_dp)->base.base.name);
+}
+
+void edp_panel_vdd_off_sync(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ struct intel_digital_port *dig_port =
+ dp_to_dig_port(intel_dp);
+ u32 pp;
+ i915_reg_t pp_stat_reg, pp_ctrl_reg;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ drm_WARN_ON(&dev_priv->drm, intel_dp->want_panel_vdd);
+
+ if (!edp_have_panel_vdd(intel_dp))
+ return;
+
+ drm_dbg_kms(&dev_priv->drm, "Turning [ENCODER:%d:%s] VDD off\n",
+ dig_port->base.base.base.id,
+ dig_port->base.base.name);
+
+ pp = ilk_get_pp_control(intel_dp);
+ pp &= ~EDP_FORCE_VDD;
+
+ pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
+ pp_stat_reg = _pp_stat_reg(intel_dp);
+
+ intel_de_write(dev_priv, pp_ctrl_reg, pp);
+ intel_de_posting_read(dev_priv, pp_ctrl_reg);
+
+ /* Make sure sequencer is idle before allowing subsequent activity */
+ drm_dbg_kms(&dev_priv->drm, "PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
+ intel_de_read(dev_priv, pp_stat_reg),
+ intel_de_read(dev_priv, pp_ctrl_reg));
+
+ if ((pp & PANEL_POWER_ON) == 0)
+ intel_dp->panel_power_off_time = ktime_get_boottime();
+
+ intel_display_power_put(dev_priv,
+ intel_aux_power_domain(dig_port),
+ fetch_and_zero(&intel_dp->vdd_wakeref));
+}
+
+void edp_panel_vdd_work(struct work_struct *__work)
+{
+ struct intel_dp *intel_dp =
+ container_of(to_delayed_work(__work),
+ struct intel_dp, panel_vdd_work);
+ intel_wakeref_t wakeref;
+
+ with_pps_lock(intel_dp, wakeref) {
+ if (!intel_dp->want_panel_vdd)
+ edp_panel_vdd_off_sync(intel_dp);
+ }
+}
+
+static void edp_panel_vdd_schedule_off(struct intel_dp *intel_dp)
+{
+ unsigned long delay;
+
+ /*
+ * Queue the timer to fire a long time from now (relative to the power
+ * down delay) to keep the panel power up across a sequence of
+ * operations.
+ */
+ delay = msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5);
+ schedule_delayed_work(&intel_dp->panel_vdd_work, delay);
+}
+
+/*
+ * Must be paired with edp_panel_vdd_on().
+ * Must hold pps_mutex around the whole on/off sequence.
+ * Can be nested with intel_edp_panel_vdd_{on,off}() calls.
+ */
+void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ if (!intel_dp_is_edp(intel_dp))
+ return;
+
+ I915_STATE_WARN(!intel_dp->want_panel_vdd, "[ENCODER:%d:%s] VDD not forced on",
+ dp_to_dig_port(intel_dp)->base.base.base.id,
+ dp_to_dig_port(intel_dp)->base.base.name);
+
+ intel_dp->want_panel_vdd = false;
+
+ if (sync)
+ edp_panel_vdd_off_sync(intel_dp);
+ else
+ edp_panel_vdd_schedule_off(intel_dp);
+}
+
+void edp_panel_on(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ u32 pp;
+ i915_reg_t pp_ctrl_reg;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ if (!intel_dp_is_edp(intel_dp))
+ return;
+
+ drm_dbg_kms(&dev_priv->drm, "Turn [ENCODER:%d:%s] panel power on\n",
+ dp_to_dig_port(intel_dp)->base.base.base.id,
+ dp_to_dig_port(intel_dp)->base.base.name);
+
+ if (drm_WARN(&dev_priv->drm, edp_have_panel_power(intel_dp),
+ "[ENCODER:%d:%s] panel power already on\n",
+ dp_to_dig_port(intel_dp)->base.base.base.id,
+ dp_to_dig_port(intel_dp)->base.base.name))
+ return;
+
+ wait_panel_power_cycle(intel_dp);
+
+ pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
+ pp = ilk_get_pp_control(intel_dp);
+ if (IS_GEN(dev_priv, 5)) {
+ /* ILK workaround: disable reset around power sequence */
+ pp &= ~PANEL_POWER_RESET;
+ intel_de_write(dev_priv, pp_ctrl_reg, pp);
+ intel_de_posting_read(dev_priv, pp_ctrl_reg);
+ }
+
+ pp |= PANEL_POWER_ON;
+ if (!IS_GEN(dev_priv, 5))
+ pp |= PANEL_POWER_RESET;
+
+ intel_de_write(dev_priv, pp_ctrl_reg, pp);
+ intel_de_posting_read(dev_priv, pp_ctrl_reg);
+
+ wait_panel_on(intel_dp);
+ intel_dp->last_power_on = jiffies;
+
+ if (IS_GEN(dev_priv, 5)) {
+ pp |= PANEL_POWER_RESET; /* restore panel reset bit */
+ intel_de_write(dev_priv, pp_ctrl_reg, pp);
+ intel_de_posting_read(dev_priv, pp_ctrl_reg);
+ }
+}
+
+void intel_edp_panel_on(struct intel_dp *intel_dp)
+{
+ intel_wakeref_t wakeref;
+
+ if (!intel_dp_is_edp(intel_dp))
+ return;
+
+ with_pps_lock(intel_dp, wakeref)
+ edp_panel_on(intel_dp);
+}
+
+void edp_panel_off(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ u32 pp;
+ i915_reg_t pp_ctrl_reg;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ if (!intel_dp_is_edp(intel_dp))
+ return;
+
+ drm_dbg_kms(&dev_priv->drm, "Turn [ENCODER:%d:%s] panel power off\n",
+ dig_port->base.base.base.id, dig_port->base.base.name);
+
+ drm_WARN(&dev_priv->drm, !intel_dp->want_panel_vdd,
+ "Need [ENCODER:%d:%s] VDD to turn off panel\n",
+ dig_port->base.base.base.id, dig_port->base.base.name);
+
+ pp = ilk_get_pp_control(intel_dp);
+ /* We need to switch off panel power _and_ force vdd, for otherwise some
+ * panels get very unhappy and cease to work. */
+ pp &= ~(PANEL_POWER_ON | PANEL_POWER_RESET | EDP_FORCE_VDD |
+ EDP_BLC_ENABLE);
+
+ pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
+
+ intel_dp->want_panel_vdd = false;
+
+ intel_de_write(dev_priv, pp_ctrl_reg, pp);
+ intel_de_posting_read(dev_priv, pp_ctrl_reg);
+
+ wait_panel_off(intel_dp);
+ intel_dp->panel_power_off_time = ktime_get_boottime();
+
+ /* We got a reference when we enabled the VDD. */
+ intel_display_power_put(dev_priv,
+ intel_aux_power_domain(dig_port),
+ fetch_and_zero(&intel_dp->vdd_wakeref));
+}
+
+void intel_edp_panel_off(struct intel_dp *intel_dp)
+{
+ intel_wakeref_t wakeref;
+
+ if (!intel_dp_is_edp(intel_dp))
+ return;
+
+ with_pps_lock(intel_dp, wakeref)
+ edp_panel_off(intel_dp);
+}
+
+/* Enable backlight in the panel power control. */
+void _intel_edp_backlight_on(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ intel_wakeref_t wakeref;
+
+ /*
+ * If we enable the backlight right away following a panel power
+ * on, we may see slight flicker as the panel syncs with the eDP
+ * link. So delay a bit to make sure the image is solid before
+ * allowing it to appear.
+ */
+ wait_backlight_on(intel_dp);
+
+ with_pps_lock(intel_dp, wakeref) {
+ i915_reg_t pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
+ u32 pp;
+
+ pp = ilk_get_pp_control(intel_dp);
+ pp |= EDP_BLC_ENABLE;
+
+ intel_de_write(dev_priv, pp_ctrl_reg, pp);
+ intel_de_posting_read(dev_priv, pp_ctrl_reg);
+ }
+}
+
+/* Disable backlight in the panel power control. */
+void _intel_edp_backlight_off(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ intel_wakeref_t wakeref;
+
+ if (!intel_dp_is_edp(intel_dp))
+ return;
+
+ with_pps_lock(intel_dp, wakeref) {
+ i915_reg_t pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
+ u32 pp;
+
+ pp = ilk_get_pp_control(intel_dp);
+ pp &= ~EDP_BLC_ENABLE;
+
+ intel_de_write(dev_priv, pp_ctrl_reg, pp);
+ intel_de_posting_read(dev_priv, pp_ctrl_reg);
+ }
+
+ intel_dp->last_backlight_off = jiffies;
+ edp_wait_backlight_off(intel_dp);
+}
+
+/*
+ * Hook for controlling the panel power control backlight through the bl_power
+ * sysfs attribute. Take care to handle multiple calls.
+ */
+void intel_edp_backlight_power(struct intel_connector *connector, bool enable)
+{
+ struct drm_i915_private *i915 = to_i915(connector->base.dev);
+ struct intel_dp *intel_dp = intel_attached_dp(connector);
+ intel_wakeref_t wakeref;
+ bool is_enabled;
+
+ is_enabled = false;
+ with_pps_lock(intel_dp, wakeref)
+ is_enabled = ilk_get_pp_control(intel_dp) & EDP_BLC_ENABLE;
+ if (is_enabled == enable)
+ return;
+
+ drm_dbg_kms(&i915->drm, "panel power control backlight %s\n",
+ enable ? "enable" : "disable");
+
+ if (enable)
+ _intel_edp_backlight_on(intel_dp);
+ else
+ _intel_edp_backlight_off(intel_dp);
+}
+
+static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
+ enum pipe pipe = intel_dp->pps_pipe;
+ i915_reg_t pp_on_reg = PP_ON_DELAYS(pipe);
+
+ drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE);
+
+ if (drm_WARN_ON(&dev_priv->drm, pipe != PIPE_A && pipe != PIPE_B))
+ return;
+
+ edp_panel_vdd_off_sync(intel_dp);
+
+ /*
+ * VLV seems to get confused when multiple power sequencers
+ * have the same port selected (even if only one has power/vdd
+ * enabled). The failure manifests as vlv_wait_port_ready() failing
+ * CHV on the other hand doesn't seem to mind having the same port
+ * selected in multiple power sequencers, but let's clear the
+ * port select always when logically disconnecting a power sequencer
+ * from a port.
+ */
+ drm_dbg_kms(&dev_priv->drm,
+ "detaching pipe %c power sequencer from [ENCODER:%d:%s]\n",
+ pipe_name(pipe), dig_port->base.base.base.id,
+ dig_port->base.base.name);
+ intel_de_write(dev_priv, pp_on_reg, 0);
+ intel_de_posting_read(dev_priv, pp_on_reg);
+
+ intel_dp->pps_pipe = INVALID_PIPE;
+}
+
+static void vlv_steal_power_sequencer(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ struct intel_encoder *encoder;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ for_each_intel_dp(&dev_priv->drm, encoder) {
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ drm_WARN(&dev_priv->drm, intel_dp->active_pipe == pipe,
+ "stealing pipe %c power sequencer from active [ENCODER:%d:%s]\n",
+ pipe_name(pipe), encoder->base.base.id,
+ encoder->base.name);
+
+ if (intel_dp->pps_pipe != pipe)
+ continue;
+
+ drm_dbg_kms(&dev_priv->drm,
+ "stealing pipe %c power sequencer from [ENCODER:%d:%s]\n",
+ pipe_name(pipe), encoder->base.base.id,
+ encoder->base.name);
+
+ /* make sure vdd is off before we steal it */
+ vlv_detach_power_sequencer(intel_dp);
+ }
+}
+
+void vlv_init_panel_power_sequencer(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE);
+
+ if (intel_dp->pps_pipe != INVALID_PIPE &&
+ intel_dp->pps_pipe != crtc->pipe) {
+ /*
+ * If another power sequencer was being used on this
+ * port previously make sure to turn off vdd there while
+ * we still have control of it.
+ */
+ vlv_detach_power_sequencer(intel_dp);
+ }
+
+ /*
+ * We may be stealing the power
+ * sequencer from another port.
+ */
+ vlv_steal_power_sequencer(dev_priv, crtc->pipe);
+
+ intel_dp->active_pipe = crtc->pipe;
+
+ if (!intel_dp_is_edp(intel_dp))
+ return;
+
+ /* now it's all ours */
+ intel_dp->pps_pipe = crtc->pipe;
+
+ drm_dbg_kms(&dev_priv->drm,
+ "initializing pipe %c power sequencer for [ENCODER:%d:%s]\n",
+ pipe_name(intel_dp->pps_pipe), encoder->base.base.id,
+ encoder->base.name);
+
+ /* init power sequencer on this pipe and port */
+ intel_dp_init_panel_power_sequencer(intel_dp);
+ intel_dp_init_panel_power_sequencer_registers(intel_dp, true);
+}
+
+void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ if (!edp_have_panel_vdd(intel_dp))
+ return;
+
+ /*
+ * The VDD bit needs a power domain reference, so if the bit is
+ * already enabled when we boot or resume, grab this reference and
+ * schedule a vdd off, so we don't hold on to the reference
+ * indefinitely.
+ */
+ drm_dbg_kms(&dev_priv->drm,
+ "VDD left on by BIOS, adjusting state tracking\n");
+ drm_WARN_ON(&dev_priv->drm, intel_dp->vdd_wakeref);
+ intel_dp->vdd_wakeref = intel_display_power_get(dev_priv,
+ intel_aux_power_domain(dig_port));
+
+ edp_panel_vdd_schedule_off(intel_dp);
+}
+
+bool intel_edp_have_power(struct intel_dp *intel_dp)
+{
+ intel_wakeref_t wakeref;
+ bool have_power = false;
+
+ with_pps_lock(intel_dp, wakeref) {
+ have_power = edp_have_panel_power(intel_dp) &&
+ edp_have_panel_vdd(intel_dp);
+ }
+
+ return have_power;
+}
+
+void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
+{
+ intel_dp->panel_power_off_time = ktime_get_boottime();
+ intel_dp->last_power_on = jiffies;
+ intel_dp->last_backlight_off = jiffies;
+}
+
+static void
+intel_pps_readout_hw_state(struct intel_dp *intel_dp, struct edp_power_seq *seq)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ u32 pp_on, pp_off, pp_ctl;
+ struct pps_registers regs;
+
+ intel_pps_get_registers(intel_dp, ®s);
+
+ pp_ctl = ilk_get_pp_control(intel_dp);
+
+ /* Ensure PPS is unlocked */
+ if (!HAS_DDI(dev_priv))
+ intel_de_write(dev_priv, regs.pp_ctrl, pp_ctl);
+
+ pp_on = intel_de_read(dev_priv, regs.pp_on);
+ pp_off = intel_de_read(dev_priv, regs.pp_off);
+
+ /* Pull timing values out of registers */
+ seq->t1_t3 = REG_FIELD_GET(PANEL_POWER_UP_DELAY_MASK, pp_on);
+ seq->t8 = REG_FIELD_GET(PANEL_LIGHT_ON_DELAY_MASK, pp_on);
+ seq->t9 = REG_FIELD_GET(PANEL_LIGHT_OFF_DELAY_MASK, pp_off);
+ seq->t10 = REG_FIELD_GET(PANEL_POWER_DOWN_DELAY_MASK, pp_off);
+
+ if (i915_mmio_reg_valid(regs.pp_div)) {
+ u32 pp_div;
+
+ pp_div = intel_de_read(dev_priv, regs.pp_div);
+
+ seq->t11_t12 = REG_FIELD_GET(PANEL_POWER_CYCLE_DELAY_MASK, pp_div) * 1000;
+ } else {
+ seq->t11_t12 = REG_FIELD_GET(BXT_POWER_CYCLE_DELAY_MASK, pp_ctl) * 1000;
+ }
+}
+
+static void
+intel_pps_dump_state(const char *state_name, const struct edp_power_seq *seq)
+{
+ DRM_DEBUG_KMS("%s t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
+ state_name,
+ seq->t1_t3, seq->t8, seq->t9, seq->t10, seq->t11_t12);
+}
+
+static void
+intel_pps_verify_state(struct intel_dp *intel_dp)
+{
+ struct edp_power_seq hw;
+ struct edp_power_seq *sw = &intel_dp->pps_delays;
+
+ intel_pps_readout_hw_state(intel_dp, &hw);
+
+ if (hw.t1_t3 != sw->t1_t3 || hw.t8 != sw->t8 || hw.t9 != sw->t9 ||
+ hw.t10 != sw->t10 || hw.t11_t12 != sw->t11_t12) {
+ DRM_ERROR("PPS state mismatch\n");
+ intel_pps_dump_state("sw", sw);
+ intel_pps_dump_state("hw", &hw);
+ }
+}
+
+static void
+intel_dp_init_panel_power_sequencer(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ struct edp_power_seq cur, vbt, spec,
+ *final = &intel_dp->pps_delays;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ /* already initialized? */
+ if (final->t11_t12 != 0)
+ return;
+
+ intel_pps_readout_hw_state(intel_dp, &cur);
+
+ intel_pps_dump_state("cur", &cur);
+
+ vbt = dev_priv->vbt.edp.pps;
+ /* On Toshiba Satellite P50-C-18C system the VBT T12 delay
+ * of 500ms appears to be too short. Ocassionally the panel
+ * just fails to power back on. Increasing the delay to 800ms
+ * seems sufficient to avoid this problem.
+ */
+ if (dev_priv->quirks & QUIRK_INCREASE_T12_DELAY) {
+ vbt.t11_t12 = max_t(u16, vbt.t11_t12, 1300 * 10);
+ drm_dbg_kms(&dev_priv->drm,
+ "Increasing T12 panel delay as per the quirk to %d\n",
+ vbt.t11_t12);
+ }
+ /* T11_T12 delay is special and actually in units of 100ms, but zero
+ * based in the hw (so we need to add 100 ms). But the sw vbt
+ * table multiplies it with 1000 to make it in units of 100usec,
+ * too. */
+ vbt.t11_t12 += 100 * 10;
+
+ /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
+ * our hw here, which are all in 100usec. */
+ spec.t1_t3 = 210 * 10;
+ spec.t8 = 50 * 10; /* no limit for t8, use t7 instead */
+ spec.t9 = 50 * 10; /* no limit for t9, make it symmetric with t8 */
+ spec.t10 = 500 * 10;
+ /* This one is special and actually in units of 100ms, but zero
+ * based in the hw (so we need to add 100 ms). But the sw vbt
+ * table multiplies it with 1000 to make it in units of 100usec,
+ * too. */
+ spec.t11_t12 = (510 + 100) * 10;
+
+ intel_pps_dump_state("vbt", &vbt);
+
+ /* Use the max of the register settings and vbt. If both are
+ * unset, fall back to the spec limits. */
+#define assign_final(field) final->field = (max(cur.field, vbt.field) == 0 ? \
+ spec.field : \
+ max(cur.field, vbt.field))
+ assign_final(t1_t3);
+ assign_final(t8);
+ assign_final(t9);
+ assign_final(t10);
+ assign_final(t11_t12);
+#undef assign_final
+
+#define get_delay(field) (DIV_ROUND_UP(final->field, 10))
+ intel_dp->panel_power_up_delay = get_delay(t1_t3);
+ intel_dp->backlight_on_delay = get_delay(t8);
+ intel_dp->backlight_off_delay = get_delay(t9);
+ intel_dp->panel_power_down_delay = get_delay(t10);
+ intel_dp->panel_power_cycle_delay = get_delay(t11_t12);
+#undef get_delay
+
+ drm_dbg_kms(&dev_priv->drm,
+ "panel power up delay %d, power down delay %d, power cycle delay %d\n",
+ intel_dp->panel_power_up_delay,
+ intel_dp->panel_power_down_delay,
+ intel_dp->panel_power_cycle_delay);
+
+ drm_dbg_kms(&dev_priv->drm, "backlight on delay %d, off delay %d\n",
+ intel_dp->backlight_on_delay,
+ intel_dp->backlight_off_delay);
+
+ /*
+ * We override the HW backlight delays to 1 because we do manual waits
+ * on them. For T8, even BSpec recommends doing it. For T9, if we
+ * don't do this, we'll end up waiting for the backlight off delay
+ * twice: once when we do the manual sleep, and once when we disable
+ * the panel and wait for the PP_STATUS bit to become zero.
+ */
+ final->t8 = 1;
+ final->t9 = 1;
+
+ /*
+ * HW has only a 100msec granularity for t11_t12 so round it up
+ * accordingly.
+ */
+ final->t11_t12 = roundup(final->t11_t12, 100 * 10);
+}
+
+static void
+intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
+ bool force_disable_vdd)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ u32 pp_on, pp_off, port_sel = 0;
+ int div = RUNTIME_INFO(dev_priv)->rawclk_freq / 1000;
+ struct pps_registers regs;
+ enum port port = dp_to_dig_port(intel_dp)->base.port;
+ const struct edp_power_seq *seq = &intel_dp->pps_delays;
+
+ lockdep_assert_held(&dev_priv->pps_mutex);
+
+ intel_pps_get_registers(intel_dp, ®s);
+
+ /*
+ * On some VLV machines the BIOS can leave the VDD
+ * enabled even on power sequencers which aren't
+ * hooked up to any port. This would mess up the
+ * power domain tracking the first time we pick
+ * one of these power sequencers for use since
+ * edp_panel_vdd_on() would notice that the VDD was
+ * already on and therefore wouldn't grab the power
+ * domain reference. Disable VDD first to avoid this.
+ * This also avoids spuriously turning the VDD on as
+ * soon as the new power sequencer gets initialized.
+ */
+ if (force_disable_vdd) {
+ u32 pp = ilk_get_pp_control(intel_dp);
+
+ drm_WARN(&dev_priv->drm, pp & PANEL_POWER_ON,
+ "Panel power already on\n");
+
+ if (pp & EDP_FORCE_VDD)
+ drm_dbg_kms(&dev_priv->drm,
+ "VDD already on, disabling first\n");
+
+ pp &= ~EDP_FORCE_VDD;
+
+ intel_de_write(dev_priv, regs.pp_ctrl, pp);
+ }
+
+ pp_on = REG_FIELD_PREP(PANEL_POWER_UP_DELAY_MASK, seq->t1_t3) |
+ REG_FIELD_PREP(PANEL_LIGHT_ON_DELAY_MASK, seq->t8);
+ pp_off = REG_FIELD_PREP(PANEL_LIGHT_OFF_DELAY_MASK, seq->t9) |
+ REG_FIELD_PREP(PANEL_POWER_DOWN_DELAY_MASK, seq->t10);
+
+ /* Haswell doesn't have any port selection bits for the panel
+ * power sequencer any more. */
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+ port_sel = PANEL_PORT_SELECT_VLV(port);
+ } else if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)) {
+ switch (port) {
+ case PORT_A:
+ port_sel = PANEL_PORT_SELECT_DPA;
+ break;
+ case PORT_C:
+ port_sel = PANEL_PORT_SELECT_DPC;
+ break;
+ case PORT_D:
+ port_sel = PANEL_PORT_SELECT_DPD;
+ break;
+ default:
+ MISSING_CASE(port);
+ break;
+ }
+ }
+
+ pp_on |= port_sel;
+
+ intel_de_write(dev_priv, regs.pp_on, pp_on);
+ intel_de_write(dev_priv, regs.pp_off, pp_off);
+
+ /*
+ * Compute the divisor for the pp clock, simply match the Bspec formula.
+ */
+ if (i915_mmio_reg_valid(regs.pp_div)) {
+ intel_de_write(dev_priv, regs.pp_div,
+ REG_FIELD_PREP(PP_REFERENCE_DIVIDER_MASK, (100 * div) / 2 - 1) | REG_FIELD_PREP(PANEL_POWER_CYCLE_DELAY_MASK, DIV_ROUND_UP(seq->t11_t12, 1000)));
+ } else {
+ u32 pp_ctl;
+
+ pp_ctl = intel_de_read(dev_priv, regs.pp_ctrl);
+ pp_ctl &= ~BXT_POWER_CYCLE_DELAY_MASK;
+ pp_ctl |= REG_FIELD_PREP(BXT_POWER_CYCLE_DELAY_MASK, DIV_ROUND_UP(seq->t11_t12, 1000));
+ intel_de_write(dev_priv, regs.pp_ctrl, pp_ctl);
+ }
+
+ drm_dbg_kms(&dev_priv->drm,
+ "panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
+ intel_de_read(dev_priv, regs.pp_on),
+ intel_de_read(dev_priv, regs.pp_off),
+ i915_mmio_reg_valid(regs.pp_div) ?
+ intel_de_read(dev_priv, regs.pp_div) :
+ (intel_de_read(dev_priv, regs.pp_ctrl) & BXT_POWER_CYCLE_DELAY_MASK));
+}
+
+void intel_dp_pps_init(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+ vlv_initial_power_sequencer_setup(intel_dp);
+ } else {
+ intel_dp_init_panel_power_sequencer(intel_dp);
+ intel_dp_init_panel_power_sequencer_registers(intel_dp, false);
+ }
+}
diff --git a/drivers/gpu/drm/i915/display/intel_pps.h b/drivers/gpu/drm/i915/display/intel_pps.h
new file mode 100644
index 000000000000..76d5cc565501
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_pps.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef __INTEL_PPS_H__
+#define __INTEL_PPS_H__
+
+#include <linux/types.h>
+
+#include "intel_wakeref.h"
+
+struct drm_i915_private;
+struct intel_connector;
+struct intel_crtc_state;
+struct intel_dp;
+struct intel_encoder;
+
+intel_wakeref_t pps_lock(struct intel_dp *intel_dp);
+intel_wakeref_t pps_unlock(struct intel_dp *intel_dp, intel_wakeref_t wakeref);
+
+#define with_pps_lock(dp, wf) \
+ for ((wf) = pps_lock(dp); (wf); (wf) = pps_unlock((dp), (wf)))
+
+void intel_dp_check_edp(struct intel_dp *intel_dp);
+void _intel_edp_backlight_on(struct intel_dp *intel_dp);
+void _intel_edp_backlight_off(struct intel_dp *intel_dp);
+void intel_edp_backlight_power(struct intel_connector *connector, bool enable);
+
+bool edp_panel_vdd_on(struct intel_dp *intel_dp);
+void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);
+void edp_panel_vdd_off_sync(struct intel_dp *intel_dp);
+void edp_panel_on(struct intel_dp *intel_dp);
+void edp_panel_off(struct intel_dp *intel_dp);
+void edp_panel_vdd_work(struct work_struct *__work);
+
+void intel_edp_panel_vdd_on(struct intel_dp *intel_dp);
+void intel_edp_panel_on(struct intel_dp *intel_dp);
+void intel_edp_panel_off(struct intel_dp *intel_dp);
+bool intel_edp_have_power(struct intel_dp *intel_dp);
+
+void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp);
+
+void wait_panel_power_cycle(struct intel_dp *intel_dp);
+
+void intel_dp_pps_init(struct intel_dp *intel_dp);
+void intel_power_sequencer_reset(struct drm_i915_private *i915);
+void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp);
+
+void vlv_init_panel_power_sequencer(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state);
+
+#endif /* __INTEL_PPS_H__ */
--
2.20.1
More information about the Intel-gfx
mailing list