[Intel-gfx] [PATCH v9 14/19] drm/i915/hdcp: MST streams support in hdcp port_data
Anshuman Gupta
anshuman.gupta at intel.com
Mon Jan 11 08:11:15 UTC 2021
Add support for multiple mst stream in hdcp port data
which will be used by RepeaterAuthStreamManage msg and
HDCP 2.2 security f/w for m' validation.
Security f/w doesn't have any provision to mark the stream_type
for each stream separately, it just take single input of
stream_type while authenticating the port and applies the
same stream_type to all streams. So driver mark each stream_type
with common highest supported content type for all streams
in DP MST Topology.
Security f/w supports RepeaterAuthStreamManage msg and m'
validation only once during port authentication and encryption.
Though it is not compulsory, security fw should support dynamic
update of content_type and should support RepeaterAuthStreamManage
msg and m' validation whenever required.
v2:
- Init the hdcp port data k for HDMI/DP SST stream.
v3:
- Cosmetic changes. [Uma]
v4:
- 's/port_auth/hdcp_port_auth'. [Ram]
- Commit log improvement.
v5:
- Comment and commit log improvement. [Ram]
v6:
- Check first connector connected status before intel_encoder_is_mst
to avoid any NULL pointer dereference.
Cc: Ramalingam C <ramalingam.c at intel.com>
Reviewed-by: Uma Shankar <uma.shankar at intel.com>
Reviewed-by: Ramalingam C <ramalingam.c at intel.com>
Tested-by: Karthik B S <karthik.b.s at intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
---
.../drm/i915/display/intel_display_types.h | 4 +-
drivers/gpu/drm/i915/display/intel_hdcp.c | 113 +++++++++++++++---
2 files changed, 102 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index b74c10c8b01c..b37a02a73de6 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1502,10 +1502,12 @@ struct intel_digital_port {
enum phy_fia tc_phy_fia;
u8 tc_phy_fia_idx;
- /* protects num_hdcp_streams reference count, hdcp_port_data */
+ /* protects num_hdcp_streams reference count, hdcp_port_data and hdcp_auth_status */
struct mutex hdcp_mutex;
/* the number of pipes using HDCP signalling out of this port */
unsigned int num_hdcp_streams;
+ /* port HDCP auth status */
+ bool hdcp_auth_status;
/* HDCP port data need to pass to security f/w */
struct hdcp_port_data hdcp_port_data;
diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
index 2bec26123a05..bd87694def74 100644
--- a/drivers/gpu/drm/i915/display/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
@@ -26,6 +26,74 @@
#define KEY_LOAD_TRIES 5
#define HDCP2_LC_RETRY_CNT 3
+static int intel_conn_to_vcpi(struct intel_connector *connector)
+{
+ /* For HDMI this is forced to be 0x0. For DP SST also this is 0x0. */
+ return connector->port ? connector->port->vcpi.vcpi : 0;
+}
+
+/*
+ * intel_hdcp_required_content_stream selects the most highest common possible HDCP
+ * content_type for all streams in DP MST topology because security f/w doesn't
+ * have any provision to mark content_type for each stream separately, it marks
+ * all available streams with the content_type proivided at the time of port
+ * authentication. This may prohibit the userspace to use type1 content on
+ * HDCP 2.2 capable sink because of other sink are not capable of HDCP 2.2 in
+ * DP MST topology. Though it is not compulsory, security fw should change its
+ * policy to mark different content_types for different streams.
+ */
+static int
+intel_hdcp_required_content_stream(struct intel_digital_port *dig_port)
+{
+ struct drm_connector_list_iter conn_iter;
+ struct intel_digital_port *conn_dig_port;
+ struct intel_connector *connector;
+ struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+ struct hdcp_port_data *data = &dig_port->hdcp_port_data;
+ bool enforce_type0 = false;
+ int k;
+
+ if (dig_port->hdcp_auth_status)
+ return 0;
+
+ drm_connector_list_iter_begin(&i915->drm, &conn_iter);
+ for_each_intel_connector_iter(connector, &conn_iter) {
+ if (connector->base.status == connector_status_disconnected)
+ continue;
+
+ if (!intel_encoder_is_mst(intel_attached_encoder(connector)))
+ continue;
+
+ conn_dig_port = intel_attached_dig_port(connector);
+ if (conn_dig_port != dig_port)
+ continue;
+
+ if (!enforce_type0 && !intel_hdcp2_capable(connector))
+ enforce_type0 = true;
+
+ data->streams[data->k].stream_id = intel_conn_to_vcpi(connector);
+ data->k++;
+
+ /* if there is only one active stream */
+ if (dig_port->dp.active_mst_links <= 1)
+ break;
+ }
+ drm_connector_list_iter_end(&conn_iter);
+
+ if (drm_WARN_ON(&i915->drm, data->k > INTEL_NUM_PIPES(i915) || data->k == 0))
+ return -EINVAL;
+
+ /*
+ * Apply common protection level across all streams in DP MST Topology.
+ * Use highest supported content type for all streams in DP MST Topology.
+ */
+ for (k = 0; k < data->k; k++)
+ data->streams[k].stream_type =
+ enforce_type0 ? DRM_MODE_HDCP_CONTENT_TYPE0 : DRM_MODE_HDCP_CONTENT_TYPE1;
+
+ return 0;
+}
+
static
bool intel_hdcp_is_ksv_valid(u8 *ksv)
{
@@ -1471,13 +1539,14 @@ static
int _hdcp2_propagate_stream_management_info(struct intel_connector *connector)
{
struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
+ struct hdcp_port_data *data = &dig_port->hdcp_port_data;
struct intel_hdcp *hdcp = &connector->hdcp;
union {
struct hdcp2_rep_stream_manage stream_manage;
struct hdcp2_rep_stream_ready stream_ready;
} msgs;
const struct intel_hdcp_shim *shim = hdcp->shim;
- int ret;
+ int ret, streams_size_delta, i;
if (connector->hdcp.seq_num_m > HDCP_2_2_SEQ_NUM_MAX)
return -ERANGE;
@@ -1486,16 +1555,18 @@ int _hdcp2_propagate_stream_management_info(struct intel_connector *connector)
msgs.stream_manage.msg_id = HDCP_2_2_REP_STREAM_MANAGE;
drm_hdcp_cpu_to_be24(msgs.stream_manage.seq_num_m, hdcp->seq_num_m);
- /* K no of streams is fixed as 1. Stored as big-endian. */
- msgs.stream_manage.k = cpu_to_be16(1);
+ msgs.stream_manage.k = cpu_to_be16(data->k);
- /* For HDMI this is forced to be 0x0. For DP SST also this is 0x0. */
- msgs.stream_manage.streams[0].stream_id = 0;
- msgs.stream_manage.streams[0].stream_type = hdcp->content_type;
+ for (i = 0; i < data->k; i++) {
+ msgs.stream_manage.streams[i].stream_id = data->streams[i].stream_id;
+ msgs.stream_manage.streams[i].stream_type = data->streams[i].stream_type;
+ }
+ streams_size_delta = (HDCP_2_2_MAX_CONTENT_STREAMS_CNT - data->k) *
+ sizeof(struct hdcp2_streamid_type);
/* Send it to Repeater */
ret = shim->write_2_2_msg(dig_port, &msgs.stream_manage,
- sizeof(msgs.stream_manage));
+ sizeof(msgs.stream_manage) - streams_size_delta);
if (ret < 0)
goto out;
@@ -1504,8 +1575,7 @@ int _hdcp2_propagate_stream_management_info(struct intel_connector *connector)
if (ret < 0)
goto out;
- dig_port->hdcp_port_data.seq_num_m = hdcp->seq_num_m;
- dig_port->hdcp_port_data.streams[0].stream_type = hdcp->content_type;
+ data->seq_num_m = hdcp->seq_num_m;
ret = hdcp2_verify_mprime(connector, &msgs.stream_ready);
@@ -1666,6 +1736,7 @@ static int hdcp2_enable_encryption(struct intel_connector *connector)
port),
LINK_ENCRYPTION_STATUS,
HDCP_ENCRYPT_STATUS_CHANGE_TIMEOUT_MS);
+ dig_port->hdcp_auth_status = true;
return ret;
}
@@ -1740,11 +1811,9 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
{
struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
struct drm_i915_private *i915 = to_i915(connector->base.dev);
- struct hdcp_port_data *data = &dig_port->hdcp_port_data;
- struct intel_hdcp *hdcp = &connector->hdcp;
- int ret, i, tries = 3;
+ int ret = 0, i, tries = 3;
- for (i = 0; i < tries; i++) {
+ for (i = 0; i < tries && !dig_port->hdcp_auth_status; i++) {
ret = hdcp2_authenticate_sink(connector);
if (!ret) {
ret = hdcp2_propagate_stream_management_info(connector);
@@ -1754,7 +1823,7 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
ret);
break;
}
- data->streams[0].stream_type = hdcp->content_type;
+
ret = hdcp2_authenticate_port(connector);
if (!ret)
break;
@@ -1789,7 +1858,9 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
static int _intel_hdcp2_enable(struct intel_connector *connector)
{
+ struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
struct drm_i915_private *i915 = to_i915(connector->base.dev);
+ struct hdcp_port_data *data = &dig_port->hdcp_port_data;
struct intel_hdcp *hdcp = &connector->hdcp;
int ret;
@@ -1797,6 +1868,16 @@ static int _intel_hdcp2_enable(struct intel_connector *connector)
connector->base.name, connector->base.base.id,
hdcp->content_type);
+ /* Stream which requires encryption */
+ if (!intel_encoder_is_mst(intel_attached_encoder(connector))) {
+ data->k = 1;
+ data->streams[0].stream_type = hdcp->content_type;
+ } else {
+ ret = intel_hdcp_required_content_stream(dig_port);
+ if (ret)
+ return ret;
+ }
+
ret = hdcp2_authenticate_and_encrypt(connector);
if (ret) {
drm_dbg_kms(&i915->drm, "HDCP2 Type%d Enabling Failed. (%d)\n",
@@ -1814,7 +1895,9 @@ static int _intel_hdcp2_enable(struct intel_connector *connector)
static int _intel_hdcp2_disable(struct intel_connector *connector)
{
+ struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
struct drm_i915_private *i915 = to_i915(connector->base.dev);
+ struct hdcp_port_data *data = &dig_port->hdcp_port_data;
int ret;
drm_dbg_kms(&i915->drm, "[%s:%d] HDCP2.2 is being Disabled\n",
@@ -1826,6 +1909,8 @@ static int _intel_hdcp2_disable(struct intel_connector *connector)
drm_dbg_kms(&i915->drm, "Port deauth failed.\n");
connector->hdcp.hdcp2_encrypted = false;
+ dig_port->hdcp_auth_status = false;
+ data->k = 0;
return ret;
}
--
2.26.2
More information about the Intel-gfx
mailing list