[Intel-gfx] [PATCH 02/11] drm/i915: refactor pll code out into intel_dpll.c

[Dave Airlie]

From: Dave Airlie <airlied at redhat.com>

This pulls a large chunk of the pll calculation code out of
intel_display.c to a new file.

One function makes sense to be an inline, otherwise this
is pretty much a straight copy cover. Also all the
remaining hooks for g45 and older end up the same now.

Signed-off-by: Dave Airlie <airlied at redhat.com>
[Jani: cleaned up intel_dpll.h a bit, de-duped intel_panel_use_ssc().]
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/Makefile                 |    1 +
 drivers/gpu/drm/i915/display/intel_display.c  | 1402 +----------------
 drivers/gpu/drm/i915/display/intel_display.h  |    3 +
 .../drm/i915/display/intel_display_types.h    |   13 +
 drivers/gpu/drm/i915/display/intel_dpll.c     | 1363 ++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dpll.h     |   23 +
 6 files changed, 1414 insertions(+), 1391 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/display/intel_dpll.c
 create mode 100644 drivers/gpu/drm/i915/display/intel_dpll.h

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index c0edb610ca97..0483d2ccf71b 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -202,6 +202,7 @@ i915-y += \
 	display/intel_display.o \
 	display/intel_display_power.o \
 	display/intel_dpio_phy.o \
+	display/intel_dpll.o \
 	display/intel_dpll_mgr.o \
 	display/intel_dsb.o \
 	display/intel_fbc.o \
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 3565ab14929a..9867fd7f990f 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -48,6 +48,7 @@
 #include "display/intel_display_debugfs.h"
 #include "display/intel_dp.h"
 #include "display/intel_dp_mst.h"
+#include "display/intel_dpll.h"
 #include "display/intel_dpll_mgr.h"
 #include "display/intel_dsi.h"
 #include "display/intel_dvo.h"
@@ -115,17 +116,6 @@ static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state);
 static void intel_modeset_setup_hw_state(struct drm_device *dev,
 					 struct drm_modeset_acquire_ctx *ctx);
 
-struct intel_limit {
-	struct {
-		int min, max;
-	} dot, vco, n, m, m1, m2, p, p1;
-
-	struct {
-		int dot_limit;
-		int p2_slow, p2_fast;
-	} p2;
-};
-
 /* returns HPLL frequency in kHz */
 int vlv_get_hpll_vco(struct drm_i915_private *dev_priv)
 {
@@ -193,271 +183,6 @@ static u32 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
 		return dev_priv->fdi_pll_freq;
 }
 
-static const struct intel_limit intel_limits_i8xx_dac = {
-	.dot = { .min = 25000, .max = 350000 },
-	.vco = { .min = 908000, .max = 1512000 },
-	.n = { .min = 2, .max = 16 },
-	.m = { .min = 96, .max = 140 },
-	.m1 = { .min = 18, .max = 26 },
-	.m2 = { .min = 6, .max = 16 },
-	.p = { .min = 4, .max = 128 },
-	.p1 = { .min = 2, .max = 33 },
-	.p2 = { .dot_limit = 165000,
-		.p2_slow = 4, .p2_fast = 2 },
-};
-
-static const struct intel_limit intel_limits_i8xx_dvo = {
-	.dot = { .min = 25000, .max = 350000 },
-	.vco = { .min = 908000, .max = 1512000 },
-	.n = { .min = 2, .max = 16 },
-	.m = { .min = 96, .max = 140 },
-	.m1 = { .min = 18, .max = 26 },
-	.m2 = { .min = 6, .max = 16 },
-	.p = { .min = 4, .max = 128 },
-	.p1 = { .min = 2, .max = 33 },
-	.p2 = { .dot_limit = 165000,
-		.p2_slow = 4, .p2_fast = 4 },
-};
-
-static const struct intel_limit intel_limits_i8xx_lvds = {
-	.dot = { .min = 25000, .max = 350000 },
-	.vco = { .min = 908000, .max = 1512000 },
-	.n = { .min = 2, .max = 16 },
-	.m = { .min = 96, .max = 140 },
-	.m1 = { .min = 18, .max = 26 },
-	.m2 = { .min = 6, .max = 16 },
-	.p = { .min = 4, .max = 128 },
-	.p1 = { .min = 1, .max = 6 },
-	.p2 = { .dot_limit = 165000,
-		.p2_slow = 14, .p2_fast = 7 },
-};
-
-static const struct intel_limit intel_limits_i9xx_sdvo = {
-	.dot = { .min = 20000, .max = 400000 },
-	.vco = { .min = 1400000, .max = 2800000 },
-	.n = { .min = 1, .max = 6 },
-	.m = { .min = 70, .max = 120 },
-	.m1 = { .min = 8, .max = 18 },
-	.m2 = { .min = 3, .max = 7 },
-	.p = { .min = 5, .max = 80 },
-	.p1 = { .min = 1, .max = 8 },
-	.p2 = { .dot_limit = 200000,
-		.p2_slow = 10, .p2_fast = 5 },
-};
-
-static const struct intel_limit intel_limits_i9xx_lvds = {
-	.dot = { .min = 20000, .max = 400000 },
-	.vco = { .min = 1400000, .max = 2800000 },
-	.n = { .min = 1, .max = 6 },
-	.m = { .min = 70, .max = 120 },
-	.m1 = { .min = 8, .max = 18 },
-	.m2 = { .min = 3, .max = 7 },
-	.p = { .min = 7, .max = 98 },
-	.p1 = { .min = 1, .max = 8 },
-	.p2 = { .dot_limit = 112000,
-		.p2_slow = 14, .p2_fast = 7 },
-};
-
-
-static const struct intel_limit intel_limits_g4x_sdvo = {
-	.dot = { .min = 25000, .max = 270000 },
-	.vco = { .min = 1750000, .max = 3500000},
-	.n = { .min = 1, .max = 4 },
-	.m = { .min = 104, .max = 138 },
-	.m1 = { .min = 17, .max = 23 },
-	.m2 = { .min = 5, .max = 11 },
-	.p = { .min = 10, .max = 30 },
-	.p1 = { .min = 1, .max = 3},
-	.p2 = { .dot_limit = 270000,
-		.p2_slow = 10,
-		.p2_fast = 10
-	},
-};
-
-static const struct intel_limit intel_limits_g4x_hdmi = {
-	.dot = { .min = 22000, .max = 400000 },
-	.vco = { .min = 1750000, .max = 3500000},
-	.n = { .min = 1, .max = 4 },
-	.m = { .min = 104, .max = 138 },
-	.m1 = { .min = 16, .max = 23 },
-	.m2 = { .min = 5, .max = 11 },
-	.p = { .min = 5, .max = 80 },
-	.p1 = { .min = 1, .max = 8},
-	.p2 = { .dot_limit = 165000,
-		.p2_slow = 10, .p2_fast = 5 },
-};
-
-static const struct intel_limit intel_limits_g4x_single_channel_lvds = {
-	.dot = { .min = 20000, .max = 115000 },
-	.vco = { .min = 1750000, .max = 3500000 },
-	.n = { .min = 1, .max = 3 },
-	.m = { .min = 104, .max = 138 },
-	.m1 = { .min = 17, .max = 23 },
-	.m2 = { .min = 5, .max = 11 },
-	.p = { .min = 28, .max = 112 },
-	.p1 = { .min = 2, .max = 8 },
-	.p2 = { .dot_limit = 0,
-		.p2_slow = 14, .p2_fast = 14
-	},
-};
-
-static const struct intel_limit intel_limits_g4x_dual_channel_lvds = {
-	.dot = { .min = 80000, .max = 224000 },
-	.vco = { .min = 1750000, .max = 3500000 },
-	.n = { .min = 1, .max = 3 },
-	.m = { .min = 104, .max = 138 },
-	.m1 = { .min = 17, .max = 23 },
-	.m2 = { .min = 5, .max = 11 },
-	.p = { .min = 14, .max = 42 },
-	.p1 = { .min = 2, .max = 6 },
-	.p2 = { .dot_limit = 0,
-		.p2_slow = 7, .p2_fast = 7
-	},
-};
-
-static const struct intel_limit pnv_limits_sdvo = {
-	.dot = { .min = 20000, .max = 400000},
-	.vco = { .min = 1700000, .max = 3500000 },
-	/* Pineview's Ncounter is a ring counter */
-	.n = { .min = 3, .max = 6 },
-	.m = { .min = 2, .max = 256 },
-	/* Pineview only has one combined m divider, which we treat as m2. */
-	.m1 = { .min = 0, .max = 0 },
-	.m2 = { .min = 0, .max = 254 },
-	.p = { .min = 5, .max = 80 },
-	.p1 = { .min = 1, .max = 8 },
-	.p2 = { .dot_limit = 200000,
-		.p2_slow = 10, .p2_fast = 5 },
-};
-
-static const struct intel_limit pnv_limits_lvds = {
-	.dot = { .min = 20000, .max = 400000 },
-	.vco = { .min = 1700000, .max = 3500000 },
-	.n = { .min = 3, .max = 6 },
-	.m = { .min = 2, .max = 256 },
-	.m1 = { .min = 0, .max = 0 },
-	.m2 = { .min = 0, .max = 254 },
-	.p = { .min = 7, .max = 112 },
-	.p1 = { .min = 1, .max = 8 },
-	.p2 = { .dot_limit = 112000,
-		.p2_slow = 14, .p2_fast = 14 },
-};
-
-/* Ironlake / Sandybridge
- *
- * We calculate clock using (register_value + 2) for N/M1/M2, so here
- * the range value for them is (actual_value - 2).
- */
-static const struct intel_limit ilk_limits_dac = {
-	.dot = { .min = 25000, .max = 350000 },
-	.vco = { .min = 1760000, .max = 3510000 },
-	.n = { .min = 1, .max = 5 },
-	.m = { .min = 79, .max = 127 },
-	.m1 = { .min = 12, .max = 22 },
-	.m2 = { .min = 5, .max = 9 },
-	.p = { .min = 5, .max = 80 },
-	.p1 = { .min = 1, .max = 8 },
-	.p2 = { .dot_limit = 225000,
-		.p2_slow = 10, .p2_fast = 5 },
-};
-
-static const struct intel_limit ilk_limits_single_lvds = {
-	.dot = { .min = 25000, .max = 350000 },
-	.vco = { .min = 1760000, .max = 3510000 },
-	.n = { .min = 1, .max = 3 },
-	.m = { .min = 79, .max = 118 },
-	.m1 = { .min = 12, .max = 22 },
-	.m2 = { .min = 5, .max = 9 },
-	.p = { .min = 28, .max = 112 },
-	.p1 = { .min = 2, .max = 8 },
-	.p2 = { .dot_limit = 225000,
-		.p2_slow = 14, .p2_fast = 14 },
-};
-
-static const struct intel_limit ilk_limits_dual_lvds = {
-	.dot = { .min = 25000, .max = 350000 },
-	.vco = { .min = 1760000, .max = 3510000 },
-	.n = { .min = 1, .max = 3 },
-	.m = { .min = 79, .max = 127 },
-	.m1 = { .min = 12, .max = 22 },
-	.m2 = { .min = 5, .max = 9 },
-	.p = { .min = 14, .max = 56 },
-	.p1 = { .min = 2, .max = 8 },
-	.p2 = { .dot_limit = 225000,
-		.p2_slow = 7, .p2_fast = 7 },
-};
-
-/* LVDS 100mhz refclk limits. */
-static const struct intel_limit ilk_limits_single_lvds_100m = {
-	.dot = { .min = 25000, .max = 350000 },
-	.vco = { .min = 1760000, .max = 3510000 },
-	.n = { .min = 1, .max = 2 },
-	.m = { .min = 79, .max = 126 },
-	.m1 = { .min = 12, .max = 22 },
-	.m2 = { .min = 5, .max = 9 },
-	.p = { .min = 28, .max = 112 },
-	.p1 = { .min = 2, .max = 8 },
-	.p2 = { .dot_limit = 225000,
-		.p2_slow = 14, .p2_fast = 14 },
-};
-
-static const struct intel_limit ilk_limits_dual_lvds_100m = {
-	.dot = { .min = 25000, .max = 350000 },
-	.vco = { .min = 1760000, .max = 3510000 },
-	.n = { .min = 1, .max = 3 },
-	.m = { .min = 79, .max = 126 },
-	.m1 = { .min = 12, .max = 22 },
-	.m2 = { .min = 5, .max = 9 },
-	.p = { .min = 14, .max = 42 },
-	.p1 = { .min = 2, .max = 6 },
-	.p2 = { .dot_limit = 225000,
-		.p2_slow = 7, .p2_fast = 7 },
-};
-
-static const struct intel_limit intel_limits_vlv = {
-	 /*
-	  * These are the data rate limits (measured in fast clocks)
-	  * since those are the strictest limits we have. The fast
-	  * clock and actual rate limits are more relaxed, so checking
-	  * them would make no difference.
-	  */
-	.dot = { .min = 25000 * 5, .max = 270000 * 5 },
-	.vco = { .min = 4000000, .max = 6000000 },
-	.n = { .min = 1, .max = 7 },
-	.m1 = { .min = 2, .max = 3 },
-	.m2 = { .min = 11, .max = 156 },
-	.p1 = { .min = 2, .max = 3 },
-	.p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
-};
-
-static const struct intel_limit intel_limits_chv = {
-	/*
-	 * These are the data rate limits (measured in fast clocks)
-	 * since those are the strictest limits we have.  The fast
-	 * clock and actual rate limits are more relaxed, so checking
-	 * them would make no difference.
-	 */
-	.dot = { .min = 25000 * 5, .max = 540000 * 5},
-	.vco = { .min = 4800000, .max = 6480000 },
-	.n = { .min = 1, .max = 1 },
-	.m1 = { .min = 2, .max = 2 },
-	.m2 = { .min = 24 << 22, .max = 175 << 22 },
-	.p1 = { .min = 2, .max = 4 },
-	.p2 = {	.p2_slow = 1, .p2_fast = 14 },
-};
-
-static const struct intel_limit intel_limits_bxt = {
-	/* FIXME: find real dot limits */
-	.dot = { .min = 0, .max = INT_MAX },
-	.vco = { .min = 4800000, .max = 6700000 },
-	.n = { .min = 1, .max = 1 },
-	.m1 = { .min = 2, .max = 2 },
-	/* FIXME: find real m2 limits */
-	.m2 = { .min = 2 << 22, .max = 255 << 22 },
-	.p1 = { .min = 2, .max = 4 },
-	.p2 = { .p2_slow = 1, .p2_fast = 20 },
-};
-
 /* WA Display #0827: Gen9:all */
 static void
 skl_wa_827(struct drm_i915_private *dev_priv, enum pipe pipe, bool enable)
@@ -502,483 +227,6 @@ is_trans_port_sync_mode(const struct intel_crtc_state *crtc_state)
 		is_trans_port_sync_slave(crtc_state);
 }
 
-/*
- * Platform specific helpers to calculate the port PLL loopback- (clock.m),
- * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
- * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
- * The helpers' return value is the rate of the clock that is fed to the
- * display engine's pipe which can be the above fast dot clock rate or a
- * divided-down version of it.
- */
-/* m1 is reserved as 0 in Pineview, n is a ring counter */
-static int pnv_calc_dpll_params(int refclk, struct dpll *clock)
-{
-	clock->m = clock->m2 + 2;
-	clock->p = clock->p1 * clock->p2;
-	if (WARN_ON(clock->n == 0 || clock->p == 0))
-		return 0;
-	clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
-	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
-
-	return clock->dot;
-}
-
-static u32 i9xx_dpll_compute_m(struct dpll *dpll)
-{
-	return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
-}
-
-static int i9xx_calc_dpll_params(int refclk, struct dpll *clock)
-{
-	clock->m = i9xx_dpll_compute_m(clock);
-	clock->p = clock->p1 * clock->p2;
-	if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
-		return 0;
-	clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
-	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
-
-	return clock->dot;
-}
-
-static int vlv_calc_dpll_params(int refclk, struct dpll *clock)
-{
-	clock->m = clock->m1 * clock->m2;
-	clock->p = clock->p1 * clock->p2;
-	if (WARN_ON(clock->n == 0 || clock->p == 0))
-		return 0;
-	clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
-	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
-
-	return clock->dot / 5;
-}
-
-int chv_calc_dpll_params(int refclk, struct dpll *clock)
-{
-	clock->m = clock->m1 * clock->m2;
-	clock->p = clock->p1 * clock->p2;
-	if (WARN_ON(clock->n == 0 || clock->p == 0))
-		return 0;
-	clock->vco = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, clock->m),
-					   clock->n << 22);
-	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
-
-	return clock->dot / 5;
-}
-
-/*
- * Returns whether the given set of divisors are valid for a given refclk with
- * the given connectors.
- */
-static bool intel_pll_is_valid(struct drm_i915_private *dev_priv,
-			       const struct intel_limit *limit,
-			       const struct dpll *clock)
-{
-	if (clock->n < limit->n.min || limit->n.max < clock->n)
-		return false;
-	if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
-		return false;
-	if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
-		return false;
-	if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
-		return false;
-
-	if (!IS_PINEVIEW(dev_priv) && !IS_VALLEYVIEW(dev_priv) &&
-	    !IS_CHERRYVIEW(dev_priv) && !IS_GEN9_LP(dev_priv))
-		if (clock->m1 <= clock->m2)
-			return false;
-
-	if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
-	    !IS_GEN9_LP(dev_priv)) {
-		if (clock->p < limit->p.min || limit->p.max < clock->p)
-			return false;
-		if (clock->m < limit->m.min || limit->m.max < clock->m)
-			return false;
-	}
-
-	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
-		return false;
-	/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
-	 * connector, etc., rather than just a single range.
-	 */
-	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
-		return false;
-
-	return true;
-}
-
-static int
-i9xx_select_p2_div(const struct intel_limit *limit,
-		   const struct intel_crtc_state *crtc_state,
-		   int target)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
-		/*
-		 * For LVDS just rely on its current settings for dual-channel.
-		 * We haven't figured out how to reliably set up different
-		 * single/dual channel state, if we even can.
-		 */
-		if (intel_is_dual_link_lvds(dev_priv))
-			return limit->p2.p2_fast;
-		else
-			return limit->p2.p2_slow;
-	} else {
-		if (target < limit->p2.dot_limit)
-			return limit->p2.p2_slow;
-		else
-			return limit->p2.p2_fast;
-	}
-}
-
-/*
- * Returns a set of divisors for the desired target clock with the given
- * refclk, or FALSE.  The returned values represent the clock equation:
- * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
- *
- * Target and reference clocks are specified in kHz.
- *
- * If match_clock is provided, then best_clock P divider must match the P
- * divider from @match_clock used for LVDS downclocking.
- */
-static bool
-i9xx_find_best_dpll(const struct intel_limit *limit,
-		    struct intel_crtc_state *crtc_state,
-		    int target, int refclk, struct dpll *match_clock,
-		    struct dpll *best_clock)
-{
-	struct drm_device *dev = crtc_state->uapi.crtc->dev;
-	struct dpll clock;
-	int err = target;
-
-	memset(best_clock, 0, sizeof(*best_clock));
-
-	clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
-
-	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
-	     clock.m1++) {
-		for (clock.m2 = limit->m2.min;
-		     clock.m2 <= limit->m2.max; clock.m2++) {
-			if (clock.m2 >= clock.m1)
-				break;
-			for (clock.n = limit->n.min;
-			     clock.n <= limit->n.max; clock.n++) {
-				for (clock.p1 = limit->p1.min;
-					clock.p1 <= limit->p1.max; clock.p1++) {
-					int this_err;
-
-					i9xx_calc_dpll_params(refclk, &clock);
-					if (!intel_pll_is_valid(to_i915(dev),
-								limit,
-								&clock))
-						continue;
-					if (match_clock &&
-					    clock.p != match_clock->p)
-						continue;
-
-					this_err = abs(clock.dot - target);
-					if (this_err < err) {
-						*best_clock = clock;
-						err = this_err;
-					}
-				}
-			}
-		}
-	}
-
-	return (err != target);
-}
-
-/*
- * Returns a set of divisors for the desired target clock with the given
- * refclk, or FALSE.  The returned values represent the clock equation:
- * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
- *
- * Target and reference clocks are specified in kHz.
- *
- * If match_clock is provided, then best_clock P divider must match the P
- * divider from @match_clock used for LVDS downclocking.
- */
-static bool
-pnv_find_best_dpll(const struct intel_limit *limit,
-		   struct intel_crtc_state *crtc_state,
-		   int target, int refclk, struct dpll *match_clock,
-		   struct dpll *best_clock)
-{
-	struct drm_device *dev = crtc_state->uapi.crtc->dev;
-	struct dpll clock;
-	int err = target;
-
-	memset(best_clock, 0, sizeof(*best_clock));
-
-	clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
-
-	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
-	     clock.m1++) {
-		for (clock.m2 = limit->m2.min;
-		     clock.m2 <= limit->m2.max; clock.m2++) {
-			for (clock.n = limit->n.min;
-			     clock.n <= limit->n.max; clock.n++) {
-				for (clock.p1 = limit->p1.min;
-					clock.p1 <= limit->p1.max; clock.p1++) {
-					int this_err;
-
-					pnv_calc_dpll_params(refclk, &clock);
-					if (!intel_pll_is_valid(to_i915(dev),
-								limit,
-								&clock))
-						continue;
-					if (match_clock &&
-					    clock.p != match_clock->p)
-						continue;
-
-					this_err = abs(clock.dot - target);
-					if (this_err < err) {
-						*best_clock = clock;
-						err = this_err;
-					}
-				}
-			}
-		}
-	}
-
-	return (err != target);
-}
-
-/*
- * Returns a set of divisors for the desired target clock with the given
- * refclk, or FALSE.  The returned values represent the clock equation:
- * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
- *
- * Target and reference clocks are specified in kHz.
- *
- * If match_clock is provided, then best_clock P divider must match the P
- * divider from @match_clock used for LVDS downclocking.
- */
-static bool
-g4x_find_best_dpll(const struct intel_limit *limit,
-		   struct intel_crtc_state *crtc_state,
-		   int target, int refclk, struct dpll *match_clock,
-		   struct dpll *best_clock)
-{
-	struct drm_device *dev = crtc_state->uapi.crtc->dev;
-	struct dpll clock;
-	int max_n;
-	bool found = false;
-	/* approximately equals target * 0.00585 */
-	int err_most = (target >> 8) + (target >> 9);
-
-	memset(best_clock, 0, sizeof(*best_clock));
-
-	clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
-
-	max_n = limit->n.max;
-	/* based on hardware requirement, prefer smaller n to precision */
-	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
-		/* based on hardware requirement, prefere larger m1,m2 */
-		for (clock.m1 = limit->m1.max;
-		     clock.m1 >= limit->m1.min; clock.m1--) {
-			for (clock.m2 = limit->m2.max;
-			     clock.m2 >= limit->m2.min; clock.m2--) {
-				for (clock.p1 = limit->p1.max;
-				     clock.p1 >= limit->p1.min; clock.p1--) {
-					int this_err;
-
-					i9xx_calc_dpll_params(refclk, &clock);
-					if (!intel_pll_is_valid(to_i915(dev),
-								limit,
-								&clock))
-						continue;
-
-					this_err = abs(clock.dot - target);
-					if (this_err < err_most) {
-						*best_clock = clock;
-						err_most = this_err;
-						max_n = clock.n;
-						found = true;
-					}
-				}
-			}
-		}
-	}
-	return found;
-}
-
-/*
- * Check if the calculated PLL configuration is more optimal compared to the
- * best configuration and error found so far. Return the calculated error.
- */
-static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
-			       const struct dpll *calculated_clock,
-			       const struct dpll *best_clock,
-			       unsigned int best_error_ppm,
-			       unsigned int *error_ppm)
-{
-	/*
-	 * For CHV ignore the error and consider only the P value.
-	 * Prefer a bigger P value based on HW requirements.
-	 */
-	if (IS_CHERRYVIEW(to_i915(dev))) {
-		*error_ppm = 0;
-
-		return calculated_clock->p > best_clock->p;
-	}
-
-	if (drm_WARN_ON_ONCE(dev, !target_freq))
-		return false;
-
-	*error_ppm = div_u64(1000000ULL *
-				abs(target_freq - calculated_clock->dot),
-			     target_freq);
-	/*
-	 * Prefer a better P value over a better (smaller) error if the error
-	 * is small. Ensure this preference for future configurations too by
-	 * setting the error to 0.
-	 */
-	if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
-		*error_ppm = 0;
-
-		return true;
-	}
-
-	return *error_ppm + 10 < best_error_ppm;
-}
-
-/*
- * Returns a set of divisors for the desired target clock with the given
- * refclk, or FALSE.  The returned values represent the clock equation:
- * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
- */
-static bool
-vlv_find_best_dpll(const struct intel_limit *limit,
-		   struct intel_crtc_state *crtc_state,
-		   int target, int refclk, struct dpll *match_clock,
-		   struct dpll *best_clock)
-{
-	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
-	struct drm_device *dev = crtc->base.dev;
-	struct dpll clock;
-	unsigned int bestppm = 1000000;
-	/* min update 19.2 MHz */
-	int max_n = min(limit->n.max, refclk / 19200);
-	bool found = false;
-
-	target *= 5; /* fast clock */
-
-	memset(best_clock, 0, sizeof(*best_clock));
-
-	/* based on hardware requirement, prefer smaller n to precision */
-	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
-		for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
-			for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
-			     clock.p2 -= clock.p2 > 10 ? 2 : 1) {
-				clock.p = clock.p1 * clock.p2;
-				/* based on hardware requirement, prefer bigger m1,m2 values */
-				for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
-					unsigned int ppm;
-
-					clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
-								     refclk * clock.m1);
-
-					vlv_calc_dpll_params(refclk, &clock);
-
-					if (!intel_pll_is_valid(to_i915(dev),
-								limit,
-								&clock))
-						continue;
-
-					if (!vlv_PLL_is_optimal(dev, target,
-								&clock,
-								best_clock,
-								bestppm, &ppm))
-						continue;
-
-					*best_clock = clock;
-					bestppm = ppm;
-					found = true;
-				}
-			}
-		}
-	}
-
-	return found;
-}
-
-/*
- * Returns a set of divisors for the desired target clock with the given
- * refclk, or FALSE.  The returned values represent the clock equation:
- * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
- */
-static bool
-chv_find_best_dpll(const struct intel_limit *limit,
-		   struct intel_crtc_state *crtc_state,
-		   int target, int refclk, struct dpll *match_clock,
-		   struct dpll *best_clock)
-{
-	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
-	struct drm_device *dev = crtc->base.dev;
-	unsigned int best_error_ppm;
-	struct dpll clock;
-	u64 m2;
-	int found = false;
-
-	memset(best_clock, 0, sizeof(*best_clock));
-	best_error_ppm = 1000000;
-
-	/*
-	 * Based on hardware doc, the n always set to 1, and m1 always
-	 * set to 2.  If requires to support 200Mhz refclk, we need to
-	 * revisit this because n may not 1 anymore.
-	 */
-	clock.n = 1;
-	clock.m1 = 2;
-	target *= 5;	/* fast clock */
-
-	for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
-		for (clock.p2 = limit->p2.p2_fast;
-				clock.p2 >= limit->p2.p2_slow;
-				clock.p2 -= clock.p2 > 10 ? 2 : 1) {
-			unsigned int error_ppm;
-
-			clock.p = clock.p1 * clock.p2;
-
-			m2 = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(target, clock.p * clock.n) << 22,
-						   refclk * clock.m1);
-
-			if (m2 > INT_MAX/clock.m1)
-				continue;
-
-			clock.m2 = m2;
-
-			chv_calc_dpll_params(refclk, &clock);
-
-			if (!intel_pll_is_valid(to_i915(dev), limit, &clock))
-				continue;
-
-			if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
-						best_error_ppm, &error_ppm))
-				continue;
-
-			*best_clock = clock;
-			best_error_ppm = error_ppm;
-			found = true;
-		}
-	}
-
-	return found;
-}
-
-bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state,
-			struct dpll *best_clock)
-{
-	int refclk = 100000;
-	const struct intel_limit *limit = &intel_limits_bxt;
-
-	return chv_find_best_dpll(limit, crtc_state,
-				  crtc_state->port_clock, refclk,
-				  NULL, best_clock);
-}
-
 static bool pipe_scanline_is_moving(struct drm_i915_private *dev_priv,
 				    enum pipe pipe)
 {
@@ -5235,7 +4483,7 @@ static void ivb_update_fdi_bc_bifurcation(const struct intel_crtc_state *crtc_st
  * Finds the encoder associated with the given CRTC. This can only be
  * used when we know that the CRTC isn't feeding multiple encoders!
  */
-static struct intel_encoder *
+struct intel_encoder *
 intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
 			   const struct intel_crtc_state *crtc_state)
 {
@@ -7903,51 +7151,6 @@ static void intel_panel_sanitize_ssc(struct drm_i915_private *dev_priv)
 	}
 }
 
-static bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
-{
-	if (dev_priv->params.panel_use_ssc >= 0)
-		return dev_priv->params.panel_use_ssc != 0;
-	return dev_priv->vbt.lvds_use_ssc
-		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
-}
-
-static u32 pnv_dpll_compute_fp(struct dpll *dpll)
-{
-	return (1 << dpll->n) << 16 | dpll->m2;
-}
-
-static u32 i9xx_dpll_compute_fp(struct dpll *dpll)
-{
-	return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
-}
-
-static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
-				     struct intel_crtc_state *crtc_state,
-				     struct dpll *reduced_clock)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	u32 fp, fp2 = 0;
-
-	if (IS_PINEVIEW(dev_priv)) {
-		fp = pnv_dpll_compute_fp(&crtc_state->dpll);
-		if (reduced_clock)
-			fp2 = pnv_dpll_compute_fp(reduced_clock);
-	} else {
-		fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
-		if (reduced_clock)
-			fp2 = i9xx_dpll_compute_fp(reduced_clock);
-	}
-
-	crtc_state->dpll_hw_state.fp0 = fp;
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
-	    reduced_clock) {
-		crtc_state->dpll_hw_state.fp1 = fp2;
-	} else {
-		crtc_state->dpll_hw_state.fp1 = fp;
-	}
-}
-
 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
 		pipe)
 {
@@ -8072,39 +7275,6 @@ void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state, enum link_m_n_s
 		intel_cpu_transcoder_set_m_n(crtc_state, dp_m_n, dp_m2_n2);
 }
 
-static void vlv_compute_dpll(struct intel_crtc *crtc,
-			     struct intel_crtc_state *pipe_config)
-{
-	pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
-		DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
-	if (crtc->pipe != PIPE_A)
-		pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
-
-	/* DPLL not used with DSI, but still need the rest set up */
-	if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
-		pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
-			DPLL_EXT_BUFFER_ENABLE_VLV;
-
-	pipe_config->dpll_hw_state.dpll_md =
-		(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-}
-
-static void chv_compute_dpll(struct intel_crtc *crtc,
-			     struct intel_crtc_state *pipe_config)
-{
-	pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
-		DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
-	if (crtc->pipe != PIPE_A)
-		pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
-
-	/* DPLL not used with DSI, but still need the rest set up */
-	if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
-		pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;
-
-	pipe_config->dpll_hw_state.dpll_md =
-		(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-}
-
 static void vlv_prepare_pll(struct intel_crtc *crtc,
 			    const struct intel_crtc_state *pipe_config)
 {
@@ -8364,128 +7534,7 @@ void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe)
 		vlv_disable_pll(dev_priv, pipe);
 }
 
-static void i9xx_compute_dpll(struct intel_crtc *crtc,
-			      struct intel_crtc_state *crtc_state,
-			      struct dpll *reduced_clock)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	u32 dpll;
-	struct dpll *clock = &crtc_state->dpll;
-
-	i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
-
-	dpll = DPLL_VGA_MODE_DIS;
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
-		dpll |= DPLLB_MODE_LVDS;
-	else
-		dpll |= DPLLB_MODE_DAC_SERIAL;
-
-	if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
-	    IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) {
-		dpll |= (crtc_state->pixel_multiplier - 1)
-			<< SDVO_MULTIPLIER_SHIFT_HIRES;
-	}
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
-	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
-		dpll |= DPLL_SDVO_HIGH_SPEED;
-
-	if (intel_crtc_has_dp_encoder(crtc_state))
-		dpll |= DPLL_SDVO_HIGH_SPEED;
-
-	/* compute bitmask from p1 value */
-	if (IS_PINEVIEW(dev_priv))
-		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
-	else {
-		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
-		if (IS_G4X(dev_priv) && reduced_clock)
-			dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
-	}
-	switch (clock->p2) {
-	case 5:
-		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
-		break;
-	case 7:
-		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
-		break;
-	case 10:
-		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
-		break;
-	case 14:
-		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
-		break;
-	}
-	if (INTEL_GEN(dev_priv) >= 4)
-		dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
-
-	if (crtc_state->sdvo_tv_clock)
-		dpll |= PLL_REF_INPUT_TVCLKINBC;
-	else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
-		 intel_panel_use_ssc(dev_priv))
-		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
-	else
-		dpll |= PLL_REF_INPUT_DREFCLK;
-
-	dpll |= DPLL_VCO_ENABLE;
-	crtc_state->dpll_hw_state.dpll = dpll;
-
-	if (INTEL_GEN(dev_priv) >= 4) {
-		u32 dpll_md = (crtc_state->pixel_multiplier - 1)
-			<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
-		crtc_state->dpll_hw_state.dpll_md = dpll_md;
-	}
-}
-
-static void i8xx_compute_dpll(struct intel_crtc *crtc,
-			      struct intel_crtc_state *crtc_state,
-			      struct dpll *reduced_clock)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	u32 dpll;
-	struct dpll *clock = &crtc_state->dpll;
-
-	i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
-
-	dpll = DPLL_VGA_MODE_DIS;
 
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
-		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
-	} else {
-		if (clock->p1 == 2)
-			dpll |= PLL_P1_DIVIDE_BY_TWO;
-		else
-			dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
-		if (clock->p2 == 4)
-			dpll |= PLL_P2_DIVIDE_BY_4;
-	}
-
-	/*
-	 * Bspec:
-	 * "[Almador Errata}: For the correct operation of the muxed DVO pins
-	 *  (GDEVSELB/I2Cdata, GIRDBY/I2CClk) and (GFRAMEB/DVI_Data,
-	 *  GTRDYB/DVI_Clk): Bit 31 (DPLL VCO Enable) and Bit 30 (2X Clock
-	 *  Enable) must be set to “1” in both the DPLL A Control Register
-	 *  (06014h-06017h) and DPLL B Control Register (06018h-0601Bh)."
-	 *
-	 * For simplicity We simply keep both bits always enabled in
-	 * both DPLLS. The spec says we should disable the DVO 2X clock
-	 * when not needed, but this seems to work fine in practice.
-	 */
-	if (IS_I830(dev_priv) ||
-	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO))
-		dpll |= DPLL_DVO_2X_MODE;
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
-	    intel_panel_use_ssc(dev_priv))
-		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
-	else
-		dpll |= PLL_REF_INPUT_DREFCLK;
-
-	dpll |= DPLL_VCO_ENABLE;
-	crtc_state->dpll_hw_state.dpll = dpll;
-}
 
 static void intel_set_transcoder_timings(const struct intel_crtc_state *crtc_state)
 {
@@ -8691,207 +7740,6 @@ static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state)
 	intel_de_posting_read(dev_priv, PIPECONF(crtc->pipe));
 }
 
-static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
-				   struct intel_crtc_state *crtc_state)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	const struct intel_limit *limit;
-	int refclk = 48000;
-
-	memset(&crtc_state->dpll_hw_state, 0,
-	       sizeof(crtc_state->dpll_hw_state));
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
-		if (intel_panel_use_ssc(dev_priv)) {
-			refclk = dev_priv->vbt.lvds_ssc_freq;
-			drm_dbg_kms(&dev_priv->drm,
-				    "using SSC reference clock of %d kHz\n",
-				    refclk);
-		}
-
-		limit = &intel_limits_i8xx_lvds;
-	} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) {
-		limit = &intel_limits_i8xx_dvo;
-	} else {
-		limit = &intel_limits_i8xx_dac;
-	}
-
-	if (!crtc_state->clock_set &&
-	    !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
-				 refclk, NULL, &crtc_state->dpll)) {
-		drm_err(&dev_priv->drm,
-			"Couldn't find PLL settings for mode!\n");
-		return -EINVAL;
-	}
-
-	i8xx_compute_dpll(crtc, crtc_state, NULL);
-
-	return 0;
-}
-
-static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
-				  struct intel_crtc_state *crtc_state)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	const struct intel_limit *limit;
-	int refclk = 96000;
-
-	memset(&crtc_state->dpll_hw_state, 0,
-	       sizeof(crtc_state->dpll_hw_state));
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
-		if (intel_panel_use_ssc(dev_priv)) {
-			refclk = dev_priv->vbt.lvds_ssc_freq;
-			drm_dbg_kms(&dev_priv->drm,
-				    "using SSC reference clock of %d kHz\n",
-				    refclk);
-		}
-
-		if (intel_is_dual_link_lvds(dev_priv))
-			limit = &intel_limits_g4x_dual_channel_lvds;
-		else
-			limit = &intel_limits_g4x_single_channel_lvds;
-	} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) ||
-		   intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
-		limit = &intel_limits_g4x_hdmi;
-	} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) {
-		limit = &intel_limits_g4x_sdvo;
-	} else {
-		/* The option is for other outputs */
-		limit = &intel_limits_i9xx_sdvo;
-	}
-
-	if (!crtc_state->clock_set &&
-	    !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
-				refclk, NULL, &crtc_state->dpll)) {
-		drm_err(&dev_priv->drm,
-			"Couldn't find PLL settings for mode!\n");
-		return -EINVAL;
-	}
-
-	i9xx_compute_dpll(crtc, crtc_state, NULL);
-
-	return 0;
-}
-
-static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
-				  struct intel_crtc_state *crtc_state)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	const struct intel_limit *limit;
-	int refclk = 96000;
-
-	memset(&crtc_state->dpll_hw_state, 0,
-	       sizeof(crtc_state->dpll_hw_state));
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
-		if (intel_panel_use_ssc(dev_priv)) {
-			refclk = dev_priv->vbt.lvds_ssc_freq;
-			drm_dbg_kms(&dev_priv->drm,
-				    "using SSC reference clock of %d kHz\n",
-				    refclk);
-		}
-
-		limit = &pnv_limits_lvds;
-	} else {
-		limit = &pnv_limits_sdvo;
-	}
-
-	if (!crtc_state->clock_set &&
-	    !pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
-				refclk, NULL, &crtc_state->dpll)) {
-		drm_err(&dev_priv->drm,
-			"Couldn't find PLL settings for mode!\n");
-		return -EINVAL;
-	}
-
-	i9xx_compute_dpll(crtc, crtc_state, NULL);
-
-	return 0;
-}
-
-static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
-				   struct intel_crtc_state *crtc_state)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	const struct intel_limit *limit;
-	int refclk = 96000;
-
-	memset(&crtc_state->dpll_hw_state, 0,
-	       sizeof(crtc_state->dpll_hw_state));
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
-		if (intel_panel_use_ssc(dev_priv)) {
-			refclk = dev_priv->vbt.lvds_ssc_freq;
-			drm_dbg_kms(&dev_priv->drm,
-				    "using SSC reference clock of %d kHz\n",
-				    refclk);
-		}
-
-		limit = &intel_limits_i9xx_lvds;
-	} else {
-		limit = &intel_limits_i9xx_sdvo;
-	}
-
-	if (!crtc_state->clock_set &&
-	    !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
-				 refclk, NULL, &crtc_state->dpll)) {
-		drm_err(&dev_priv->drm,
-			"Couldn't find PLL settings for mode!\n");
-		return -EINVAL;
-	}
-
-	i9xx_compute_dpll(crtc, crtc_state, NULL);
-
-	return 0;
-}
-
-static int chv_crtc_compute_clock(struct intel_crtc *crtc,
-				  struct intel_crtc_state *crtc_state)
-{
-	int refclk = 100000;
-	const struct intel_limit *limit = &intel_limits_chv;
-	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
-
-	memset(&crtc_state->dpll_hw_state, 0,
-	       sizeof(crtc_state->dpll_hw_state));
-
-	if (!crtc_state->clock_set &&
-	    !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
-				refclk, NULL, &crtc_state->dpll)) {
-		drm_err(&i915->drm, "Couldn't find PLL settings for mode!\n");
-		return -EINVAL;
-	}
-
-	chv_compute_dpll(crtc, crtc_state);
-
-	return 0;
-}
-
-static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
-				  struct intel_crtc_state *crtc_state)
-{
-	int refclk = 100000;
-	const struct intel_limit *limit = &intel_limits_vlv;
-	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
-
-	memset(&crtc_state->dpll_hw_state, 0,
-	       sizeof(crtc_state->dpll_hw_state));
-
-	if (!crtc_state->clock_set &&
-	    !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
-				refclk, NULL, &crtc_state->dpll)) {
-		drm_err(&i915->drm,  "Couldn't find PLL settings for mode!\n");
-		return -EINVAL;
-	}
-
-	vlv_compute_dpll(crtc, crtc_state);
-
-	return 0;
-}
 
 static bool i9xx_has_pfit(struct drm_i915_private *dev_priv)
 {
@@ -9902,172 +8750,6 @@ int ilk_get_lanes_required(int target_clock, int link_bw, int bpp)
 	return DIV_ROUND_UP(bps, link_bw * 8);
 }
 
-static bool ilk_needs_fb_cb_tune(struct dpll *dpll, int factor)
-{
-	return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
-}
-
-static void ilk_compute_dpll(struct intel_crtc *crtc,
-			     struct intel_crtc_state *crtc_state,
-			     struct dpll *reduced_clock)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	u32 dpll, fp, fp2;
-	int factor;
-
-	/* Enable autotuning of the PLL clock (if permissible) */
-	factor = 21;
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
-		if ((intel_panel_use_ssc(dev_priv) &&
-		     dev_priv->vbt.lvds_ssc_freq == 100000) ||
-		    (HAS_PCH_IBX(dev_priv) &&
-		     intel_is_dual_link_lvds(dev_priv)))
-			factor = 25;
-	} else if (crtc_state->sdvo_tv_clock) {
-		factor = 20;
-	}
-
-	fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
-
-	if (ilk_needs_fb_cb_tune(&crtc_state->dpll, factor))
-		fp |= FP_CB_TUNE;
-
-	if (reduced_clock) {
-		fp2 = i9xx_dpll_compute_fp(reduced_clock);
-
-		if (reduced_clock->m < factor * reduced_clock->n)
-			fp2 |= FP_CB_TUNE;
-	} else {
-		fp2 = fp;
-	}
-
-	dpll = 0;
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
-		dpll |= DPLLB_MODE_LVDS;
-	else
-		dpll |= DPLLB_MODE_DAC_SERIAL;
-
-	dpll |= (crtc_state->pixel_multiplier - 1)
-		<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
-	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
-		dpll |= DPLL_SDVO_HIGH_SPEED;
-
-	if (intel_crtc_has_dp_encoder(crtc_state))
-		dpll |= DPLL_SDVO_HIGH_SPEED;
-
-	/*
-	 * The high speed IO clock is only really required for
-	 * SDVO/HDMI/DP, but we also enable it for CRT to make it
-	 * possible to share the DPLL between CRT and HDMI. Enabling
-	 * the clock needlessly does no real harm, except use up a
-	 * bit of power potentially.
-	 *
-	 * We'll limit this to IVB with 3 pipes, since it has only two
-	 * DPLLs and so DPLL sharing is the only way to get three pipes
-	 * driving PCH ports at the same time. On SNB we could do this,
-	 * and potentially avoid enabling the second DPLL, but it's not
-	 * clear if it''s a win or loss power wise. No point in doing
-	 * this on ILK at all since it has a fixed DPLL<->pipe mapping.
-	 */
-	if (INTEL_NUM_PIPES(dev_priv) == 3 &&
-	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG))
-		dpll |= DPLL_SDVO_HIGH_SPEED;
-
-	/* compute bitmask from p1 value */
-	dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
-	/* also FPA1 */
-	dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
-
-	switch (crtc_state->dpll.p2) {
-	case 5:
-		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
-		break;
-	case 7:
-		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
-		break;
-	case 10:
-		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
-		break;
-	case 14:
-		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
-		break;
-	}
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
-	    intel_panel_use_ssc(dev_priv))
-		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
-	else
-		dpll |= PLL_REF_INPUT_DREFCLK;
-
-	dpll |= DPLL_VCO_ENABLE;
-
-	crtc_state->dpll_hw_state.dpll = dpll;
-	crtc_state->dpll_hw_state.fp0 = fp;
-	crtc_state->dpll_hw_state.fp1 = fp2;
-}
-
-static int ilk_crtc_compute_clock(struct intel_crtc *crtc,
-				  struct intel_crtc_state *crtc_state)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	struct intel_atomic_state *state =
-		to_intel_atomic_state(crtc_state->uapi.state);
-	const struct intel_limit *limit;
-	int refclk = 120000;
-
-	memset(&crtc_state->dpll_hw_state, 0,
-	       sizeof(crtc_state->dpll_hw_state));
-
-	/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
-	if (!crtc_state->has_pch_encoder)
-		return 0;
-
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
-		if (intel_panel_use_ssc(dev_priv)) {
-			drm_dbg_kms(&dev_priv->drm,
-				    "using SSC reference clock of %d kHz\n",
-				    dev_priv->vbt.lvds_ssc_freq);
-			refclk = dev_priv->vbt.lvds_ssc_freq;
-		}
-
-		if (intel_is_dual_link_lvds(dev_priv)) {
-			if (refclk == 100000)
-				limit = &ilk_limits_dual_lvds_100m;
-			else
-				limit = &ilk_limits_dual_lvds;
-		} else {
-			if (refclk == 100000)
-				limit = &ilk_limits_single_lvds_100m;
-			else
-				limit = &ilk_limits_single_lvds;
-		}
-	} else {
-		limit = &ilk_limits_dac;
-	}
-
-	if (!crtc_state->clock_set &&
-	    !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
-				refclk, NULL, &crtc_state->dpll)) {
-		drm_err(&dev_priv->drm,
-			"Couldn't find PLL settings for mode!\n");
-		return -EINVAL;
-	}
-
-	ilk_compute_dpll(crtc, crtc_state, NULL);
-
-	if (!intel_reserve_shared_dplls(state, crtc, NULL)) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "failed to find PLL for pipe %c\n",
-			    pipe_name(crtc->pipe));
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
 					 struct intel_link_m_n *m_n)
 {
@@ -10480,29 +9162,6 @@ static bool ilk_get_pipe_config(struct intel_crtc *crtc,
 	return ret;
 }
 
-static int hsw_crtc_compute_clock(struct intel_crtc *crtc,
-				  struct intel_crtc_state *crtc_state)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	struct intel_atomic_state *state =
-		to_intel_atomic_state(crtc_state->uapi.state);
-
-	if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) ||
-	    INTEL_GEN(dev_priv) >= 11) {
-		struct intel_encoder *encoder =
-			intel_get_crtc_new_encoder(state, crtc_state);
-
-		if (!intel_reserve_shared_dplls(state, crtc, encoder)) {
-			drm_dbg_kms(&dev_priv->drm,
-				    "failed to find PLL for pipe %c\n",
-				    pipe_name(crtc->pipe));
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
 static void dg1_get_ddi_pll(struct drm_i915_private *dev_priv, enum port port,
 			    struct intel_crtc_state *pipe_config)
 {
@@ -16437,69 +15096,27 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
 {
 	intel_init_cdclk_hooks(dev_priv);
 
+	intel_dpll_init_clock_hook(dev_priv);
+
 	if (INTEL_GEN(dev_priv) >= 9) {
 		dev_priv->display.get_pipe_config = hsw_get_pipe_config;
-		dev_priv->display.get_initial_plane_config =
-			skl_get_initial_plane_config;
-		dev_priv->display.crtc_compute_clock = hsw_crtc_compute_clock;
 		dev_priv->display.crtc_enable = hsw_crtc_enable;
 		dev_priv->display.crtc_disable = hsw_crtc_disable;
 	} else if (HAS_DDI(dev_priv)) {
 		dev_priv->display.get_pipe_config = hsw_get_pipe_config;
-		dev_priv->display.get_initial_plane_config =
-			i9xx_get_initial_plane_config;
-		dev_priv->display.crtc_compute_clock =
-			hsw_crtc_compute_clock;
 		dev_priv->display.crtc_enable = hsw_crtc_enable;
 		dev_priv->display.crtc_disable = hsw_crtc_disable;
 	} else if (HAS_PCH_SPLIT(dev_priv)) {
 		dev_priv->display.get_pipe_config = ilk_get_pipe_config;
-		dev_priv->display.get_initial_plane_config =
-			i9xx_get_initial_plane_config;
-		dev_priv->display.crtc_compute_clock =
-			ilk_crtc_compute_clock;
 		dev_priv->display.crtc_enable = ilk_crtc_enable;
 		dev_priv->display.crtc_disable = ilk_crtc_disable;
-	} else if (IS_CHERRYVIEW(dev_priv)) {
-		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
-		dev_priv->display.get_initial_plane_config =
-			i9xx_get_initial_plane_config;
-		dev_priv->display.crtc_compute_clock = chv_crtc_compute_clock;
-		dev_priv->display.crtc_enable = valleyview_crtc_enable;
-		dev_priv->display.crtc_disable = i9xx_crtc_disable;
-	} else if (IS_VALLEYVIEW(dev_priv)) {
+	} else if (IS_CHERRYVIEW(dev_priv) ||
+		   IS_VALLEYVIEW(dev_priv)) {
 		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
-		dev_priv->display.get_initial_plane_config =
-			i9xx_get_initial_plane_config;
-		dev_priv->display.crtc_compute_clock = vlv_crtc_compute_clock;
 		dev_priv->display.crtc_enable = valleyview_crtc_enable;
 		dev_priv->display.crtc_disable = i9xx_crtc_disable;
-	} else if (IS_G4X(dev_priv)) {
-		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
-		dev_priv->display.get_initial_plane_config =
-			i9xx_get_initial_plane_config;
-		dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock;
-		dev_priv->display.crtc_enable = i9xx_crtc_enable;
-		dev_priv->display.crtc_disable = i9xx_crtc_disable;
-	} else if (IS_PINEVIEW(dev_priv)) {
-		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
-		dev_priv->display.get_initial_plane_config =
-			i9xx_get_initial_plane_config;
-		dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock;
-		dev_priv->display.crtc_enable = i9xx_crtc_enable;
-		dev_priv->display.crtc_disable = i9xx_crtc_disable;
-	} else if (!IS_GEN(dev_priv, 2)) {
-		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
-		dev_priv->display.get_initial_plane_config =
-			i9xx_get_initial_plane_config;
-		dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
-		dev_priv->display.crtc_enable = i9xx_crtc_enable;
-		dev_priv->display.crtc_disable = i9xx_crtc_disable;
 	} else {
 		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
-		dev_priv->display.get_initial_plane_config =
-			i9xx_get_initial_plane_config;
-		dev_priv->display.crtc_compute_clock = i8xx_crtc_compute_clock;
 		dev_priv->display.crtc_enable = i9xx_crtc_enable;
 		dev_priv->display.crtc_disable = i9xx_crtc_disable;
 	}
@@ -16513,10 +15130,13 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
 		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
 	}
 
-	if (INTEL_GEN(dev_priv) >= 9)
+	if (INTEL_GEN(dev_priv) >= 9) {
 		dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
-	else
+		dev_priv->display.get_initial_plane_config = skl_get_initial_plane_config;
+	} else {
 		dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;
+		dev_priv->display.get_initial_plane_config = i9xx_get_initial_plane_config;
+	}
 
 }
 
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index 7ddbc00a0f41..604a183fef7d 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -651,6 +651,9 @@ u32 intel_plane_compute_aligned_offset(int *x, int *y,
 				       int color_plane);
 int intel_plane_pin_fb(struct intel_plane_state *plane_state);
 void intel_plane_unpin_fb(struct intel_plane_state *old_plane_state);
+struct intel_encoder *
+intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
+			   const struct intel_crtc_state *crtc_state);
 
 /* modesetting */
 void intel_modeset_init_hw(struct drm_i915_private *i915);
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 24792102bcf6..8e145f9a32e5 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1839,4 +1839,17 @@ to_intel_frontbuffer(struct drm_framebuffer *fb)
 	return fb ? to_intel_framebuffer(fb)->frontbuffer : NULL;
 }
 
+static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
+{
+	if (dev_priv->params.panel_use_ssc >= 0)
+		return dev_priv->params.panel_use_ssc != 0;
+	return dev_priv->vbt.lvds_use_ssc
+		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
+}
+
+static inline u32 i9xx_dpll_compute_fp(struct dpll *dpll)
+{
+	return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
+}
+
 #endif /*  __INTEL_DISPLAY_TYPES_H__ */
diff --git a/drivers/gpu/drm/i915/display/intel_dpll.c b/drivers/gpu/drm/i915/display/intel_dpll.c
new file mode 100644
index 000000000000..7ba7f315aaee
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_dpll.c
@@ -0,0 +1,1363 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+#include <linux/kernel.h>
+#include "intel_display_types.h"
+#include "intel_display.h"
+#include "intel_dpll.h"
+#include "intel_lvds.h"
+#include "intel_panel.h"
+
+struct intel_limit {
+	struct {
+		int min, max;
+	} dot, vco, n, m, m1, m2, p, p1;
+
+	struct {
+		int dot_limit;
+		int p2_slow, p2_fast;
+	} p2;
+};
+static const struct intel_limit intel_limits_i8xx_dac = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 908000, .max = 1512000 },
+	.n = { .min = 2, .max = 16 },
+	.m = { .min = 96, .max = 140 },
+	.m1 = { .min = 18, .max = 26 },
+	.m2 = { .min = 6, .max = 16 },
+	.p = { .min = 4, .max = 128 },
+	.p1 = { .min = 2, .max = 33 },
+	.p2 = { .dot_limit = 165000,
+		.p2_slow = 4, .p2_fast = 2 },
+};
+
+static const struct intel_limit intel_limits_i8xx_dvo = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 908000, .max = 1512000 },
+	.n = { .min = 2, .max = 16 },
+	.m = { .min = 96, .max = 140 },
+	.m1 = { .min = 18, .max = 26 },
+	.m2 = { .min = 6, .max = 16 },
+	.p = { .min = 4, .max = 128 },
+	.p1 = { .min = 2, .max = 33 },
+	.p2 = { .dot_limit = 165000,
+		.p2_slow = 4, .p2_fast = 4 },
+};
+
+static const struct intel_limit intel_limits_i8xx_lvds = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 908000, .max = 1512000 },
+	.n = { .min = 2, .max = 16 },
+	.m = { .min = 96, .max = 140 },
+	.m1 = { .min = 18, .max = 26 },
+	.m2 = { .min = 6, .max = 16 },
+	.p = { .min = 4, .max = 128 },
+	.p1 = { .min = 1, .max = 6 },
+	.p2 = { .dot_limit = 165000,
+		.p2_slow = 14, .p2_fast = 7 },
+};
+
+static const struct intel_limit intel_limits_i9xx_sdvo = {
+	.dot = { .min = 20000, .max = 400000 },
+	.vco = { .min = 1400000, .max = 2800000 },
+	.n = { .min = 1, .max = 6 },
+	.m = { .min = 70, .max = 120 },
+	.m1 = { .min = 8, .max = 18 },
+	.m2 = { .min = 3, .max = 7 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 200000,
+		.p2_slow = 10, .p2_fast = 5 },
+};
+
+static const struct intel_limit intel_limits_i9xx_lvds = {
+	.dot = { .min = 20000, .max = 400000 },
+	.vco = { .min = 1400000, .max = 2800000 },
+	.n = { .min = 1, .max = 6 },
+	.m = { .min = 70, .max = 120 },
+	.m1 = { .min = 8, .max = 18 },
+	.m2 = { .min = 3, .max = 7 },
+	.p = { .min = 7, .max = 98 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 112000,
+		.p2_slow = 14, .p2_fast = 7 },
+};
+
+
+static const struct intel_limit intel_limits_g4x_sdvo = {
+	.dot = { .min = 25000, .max = 270000 },
+	.vco = { .min = 1750000, .max = 3500000},
+	.n = { .min = 1, .max = 4 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 17, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 10, .max = 30 },
+	.p1 = { .min = 1, .max = 3},
+	.p2 = { .dot_limit = 270000,
+		.p2_slow = 10,
+		.p2_fast = 10
+	},
+};
+
+static const struct intel_limit intel_limits_g4x_hdmi = {
+	.dot = { .min = 22000, .max = 400000 },
+	.vco = { .min = 1750000, .max = 3500000},
+	.n = { .min = 1, .max = 4 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 16, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8},
+	.p2 = { .dot_limit = 165000,
+		.p2_slow = 10, .p2_fast = 5 },
+};
+
+static const struct intel_limit intel_limits_g4x_single_channel_lvds = {
+	.dot = { .min = 20000, .max = 115000 },
+	.vco = { .min = 1750000, .max = 3500000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 17, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 28, .max = 112 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 0,
+		.p2_slow = 14, .p2_fast = 14
+	},
+};
+
+static const struct intel_limit intel_limits_g4x_dual_channel_lvds = {
+	.dot = { .min = 80000, .max = 224000 },
+	.vco = { .min = 1750000, .max = 3500000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 17, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 14, .max = 42 },
+	.p1 = { .min = 2, .max = 6 },
+	.p2 = { .dot_limit = 0,
+		.p2_slow = 7, .p2_fast = 7
+	},
+};
+
+static const struct intel_limit pnv_limits_sdvo = {
+	.dot = { .min = 20000, .max = 400000},
+	.vco = { .min = 1700000, .max = 3500000 },
+	/* Pineview's Ncounter is a ring counter */
+	.n = { .min = 3, .max = 6 },
+	.m = { .min = 2, .max = 256 },
+	/* Pineview only has one combined m divider, which we treat as m2. */
+	.m1 = { .min = 0, .max = 0 },
+	.m2 = { .min = 0, .max = 254 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 200000,
+		.p2_slow = 10, .p2_fast = 5 },
+};
+
+static const struct intel_limit pnv_limits_lvds = {
+	.dot = { .min = 20000, .max = 400000 },
+	.vco = { .min = 1700000, .max = 3500000 },
+	.n = { .min = 3, .max = 6 },
+	.m = { .min = 2, .max = 256 },
+	.m1 = { .min = 0, .max = 0 },
+	.m2 = { .min = 0, .max = 254 },
+	.p = { .min = 7, .max = 112 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 112000,
+		.p2_slow = 14, .p2_fast = 14 },
+};
+
+/* Ironlake / Sandybridge
+ *
+ * We calculate clock using (register_value + 2) for N/M1/M2, so here
+ * the range value for them is (actual_value - 2).
+ */
+static const struct intel_limit ilk_limits_dac = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 5 },
+	.m = { .min = 79, .max = 127 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 10, .p2_fast = 5 },
+};
+
+static const struct intel_limit ilk_limits_single_lvds = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 79, .max = 118 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 28, .max = 112 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 14, .p2_fast = 14 },
+};
+
+static const struct intel_limit ilk_limits_dual_lvds = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 79, .max = 127 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 14, .max = 56 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 7, .p2_fast = 7 },
+};
+
+/* LVDS 100mhz refclk limits. */
+static const struct intel_limit ilk_limits_single_lvds_100m = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 2 },
+	.m = { .min = 79, .max = 126 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 28, .max = 112 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 14, .p2_fast = 14 },
+};
+
+static const struct intel_limit ilk_limits_dual_lvds_100m = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 79, .max = 126 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 14, .max = 42 },
+	.p1 = { .min = 2, .max = 6 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 7, .p2_fast = 7 },
+};
+
+static const struct intel_limit intel_limits_vlv = {
+	 /*
+	  * These are the data rate limits (measured in fast clocks)
+	  * since those are the strictest limits we have. The fast
+	  * clock and actual rate limits are more relaxed, so checking
+	  * them would make no difference.
+	  */
+	.dot = { .min = 25000 * 5, .max = 270000 * 5 },
+	.vco = { .min = 4000000, .max = 6000000 },
+	.n = { .min = 1, .max = 7 },
+	.m1 = { .min = 2, .max = 3 },
+	.m2 = { .min = 11, .max = 156 },
+	.p1 = { .min = 2, .max = 3 },
+	.p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
+};
+
+static const struct intel_limit intel_limits_chv = {
+	/*
+	 * These are the data rate limits (measured in fast clocks)
+	 * since those are the strictest limits we have.  The fast
+	 * clock and actual rate limits are more relaxed, so checking
+	 * them would make no difference.
+	 */
+	.dot = { .min = 25000 * 5, .max = 540000 * 5},
+	.vco = { .min = 4800000, .max = 6480000 },
+	.n = { .min = 1, .max = 1 },
+	.m1 = { .min = 2, .max = 2 },
+	.m2 = { .min = 24 << 22, .max = 175 << 22 },
+	.p1 = { .min = 2, .max = 4 },
+	.p2 = {	.p2_slow = 1, .p2_fast = 14 },
+};
+
+static const struct intel_limit intel_limits_bxt = {
+	/* FIXME: find real dot limits */
+	.dot = { .min = 0, .max = INT_MAX },
+	.vco = { .min = 4800000, .max = 6700000 },
+	.n = { .min = 1, .max = 1 },
+	.m1 = { .min = 2, .max = 2 },
+	/* FIXME: find real m2 limits */
+	.m2 = { .min = 2 << 22, .max = 255 << 22 },
+	.p1 = { .min = 2, .max = 4 },
+	.p2 = { .p2_slow = 1, .p2_fast = 20 },
+};
+
+/*
+ * Platform specific helpers to calculate the port PLL loopback- (clock.m),
+ * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
+ * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
+ * The helpers' return value is the rate of the clock that is fed to the
+ * display engine's pipe which can be the above fast dot clock rate or a
+ * divided-down version of it.
+ */
+/* m1 is reserved as 0 in Pineview, n is a ring counter */
+int pnv_calc_dpll_params(int refclk, struct dpll *clock)
+{
+	clock->m = clock->m2 + 2;
+	clock->p = clock->p1 * clock->p2;
+	if (WARN_ON(clock->n == 0 || clock->p == 0))
+		return 0;
+	clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
+	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+	return clock->dot;
+}
+
+static u32 i9xx_dpll_compute_m(struct dpll *dpll)
+{
+	return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
+}
+
+int i9xx_calc_dpll_params(int refclk, struct dpll *clock)
+{
+	clock->m = i9xx_dpll_compute_m(clock);
+	clock->p = clock->p1 * clock->p2;
+	if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
+		return 0;
+	clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
+	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+	return clock->dot;
+}
+
+int vlv_calc_dpll_params(int refclk, struct dpll *clock)
+{
+	clock->m = clock->m1 * clock->m2;
+	clock->p = clock->p1 * clock->p2;
+	if (WARN_ON(clock->n == 0 || clock->p == 0))
+		return 0;
+	clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
+	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+	return clock->dot / 5;
+}
+
+int chv_calc_dpll_params(int refclk, struct dpll *clock)
+{
+	clock->m = clock->m1 * clock->m2;
+	clock->p = clock->p1 * clock->p2;
+	if (WARN_ON(clock->n == 0 || clock->p == 0))
+		return 0;
+	clock->vco = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, clock->m),
+					   clock->n << 22);
+	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
+
+	return clock->dot / 5;
+}
+
+/*
+ * Returns whether the given set of divisors are valid for a given refclk with
+ * the given connectors.
+ */
+static bool intel_pll_is_valid(struct drm_i915_private *dev_priv,
+			       const struct intel_limit *limit,
+			       const struct dpll *clock)
+{
+	if (clock->n < limit->n.min || limit->n.max < clock->n)
+		return false;
+	if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
+		return false;
+	if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
+		return false;
+	if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
+		return false;
+
+	if (!IS_PINEVIEW(dev_priv) && !IS_VALLEYVIEW(dev_priv) &&
+	    !IS_CHERRYVIEW(dev_priv) && !IS_GEN9_LP(dev_priv))
+		if (clock->m1 <= clock->m2)
+			return false;
+
+	if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
+	    !IS_GEN9_LP(dev_priv)) {
+		if (clock->p < limit->p.min || limit->p.max < clock->p)
+			return false;
+		if (clock->m < limit->m.min || limit->m.max < clock->m)
+			return false;
+	}
+
+	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+		return false;
+	/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
+	 * connector, etc., rather than just a single range.
+	 */
+	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+		return false;
+
+	return true;
+}
+
+static int
+i9xx_select_p2_div(const struct intel_limit *limit,
+		   const struct intel_crtc_state *crtc_state,
+		   int target)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+		/*
+		 * For LVDS just rely on its current settings for dual-channel.
+		 * We haven't figured out how to reliably set up different
+		 * single/dual channel state, if we even can.
+		 */
+		if (intel_is_dual_link_lvds(dev_priv))
+			return limit->p2.p2_fast;
+		else
+			return limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			return limit->p2.p2_slow;
+		else
+			return limit->p2.p2_fast;
+	}
+}
+
+/*
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE.  The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ *
+ * Target and reference clocks are specified in kHz.
+ *
+ * If match_clock is provided, then best_clock P divider must match the P
+ * divider from @match_clock used for LVDS downclocking.
+ */
+static bool
+i9xx_find_best_dpll(const struct intel_limit *limit,
+		    struct intel_crtc_state *crtc_state,
+		    int target, int refclk, struct dpll *match_clock,
+		    struct dpll *best_clock)
+{
+	struct drm_device *dev = crtc_state->uapi.crtc->dev;
+	struct dpll clock;
+	int err = target;
+
+	memset(best_clock, 0, sizeof(*best_clock));
+
+	clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
+
+	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
+	     clock.m1++) {
+		for (clock.m2 = limit->m2.min;
+		     clock.m2 <= limit->m2.max; clock.m2++) {
+			if (clock.m2 >= clock.m1)
+				break;
+			for (clock.n = limit->n.min;
+			     clock.n <= limit->n.max; clock.n++) {
+				for (clock.p1 = limit->p1.min;
+					clock.p1 <= limit->p1.max; clock.p1++) {
+					int this_err;
+
+					i9xx_calc_dpll_params(refclk, &clock);
+					if (!intel_pll_is_valid(to_i915(dev),
+								limit,
+								&clock))
+						continue;
+					if (match_clock &&
+					    clock.p != match_clock->p)
+						continue;
+
+					this_err = abs(clock.dot - target);
+					if (this_err < err) {
+						*best_clock = clock;
+						err = this_err;
+					}
+				}
+			}
+		}
+	}
+
+	return (err != target);
+}
+
+/*
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE.  The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ *
+ * Target and reference clocks are specified in kHz.
+ *
+ * If match_clock is provided, then best_clock P divider must match the P
+ * divider from @match_clock used for LVDS downclocking.
+ */
+static bool
+pnv_find_best_dpll(const struct intel_limit *limit,
+		   struct intel_crtc_state *crtc_state,
+		   int target, int refclk, struct dpll *match_clock,
+		   struct dpll *best_clock)
+{
+	struct drm_device *dev = crtc_state->uapi.crtc->dev;
+	struct dpll clock;
+	int err = target;
+
+	memset(best_clock, 0, sizeof(*best_clock));
+
+	clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
+
+	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
+	     clock.m1++) {
+		for (clock.m2 = limit->m2.min;
+		     clock.m2 <= limit->m2.max; clock.m2++) {
+			for (clock.n = limit->n.min;
+			     clock.n <= limit->n.max; clock.n++) {
+				for (clock.p1 = limit->p1.min;
+					clock.p1 <= limit->p1.max; clock.p1++) {
+					int this_err;
+
+					pnv_calc_dpll_params(refclk, &clock);
+					if (!intel_pll_is_valid(to_i915(dev),
+								limit,
+								&clock))
+						continue;
+					if (match_clock &&
+					    clock.p != match_clock->p)
+						continue;
+
+					this_err = abs(clock.dot - target);
+					if (this_err < err) {
+						*best_clock = clock;
+						err = this_err;
+					}
+				}
+			}
+		}
+	}
+
+	return (err != target);
+}
+
+/*
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE.  The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ *
+ * Target and reference clocks are specified in kHz.
+ *
+ * If match_clock is provided, then best_clock P divider must match the P
+ * divider from @match_clock used for LVDS downclocking.
+ */
+static bool
+g4x_find_best_dpll(const struct intel_limit *limit,
+		   struct intel_crtc_state *crtc_state,
+		   int target, int refclk, struct dpll *match_clock,
+		   struct dpll *best_clock)
+{
+	struct drm_device *dev = crtc_state->uapi.crtc->dev;
+	struct dpll clock;
+	int max_n;
+	bool found = false;
+	/* approximately equals target * 0.00585 */
+	int err_most = (target >> 8) + (target >> 9);
+
+	memset(best_clock, 0, sizeof(*best_clock));
+
+	clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
+
+	max_n = limit->n.max;
+	/* based on hardware requirement, prefer smaller n to precision */
+	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
+		/* based on hardware requirement, prefere larger m1,m2 */
+		for (clock.m1 = limit->m1.max;
+		     clock.m1 >= limit->m1.min; clock.m1--) {
+			for (clock.m2 = limit->m2.max;
+			     clock.m2 >= limit->m2.min; clock.m2--) {
+				for (clock.p1 = limit->p1.max;
+				     clock.p1 >= limit->p1.min; clock.p1--) {
+					int this_err;
+
+					i9xx_calc_dpll_params(refclk, &clock);
+					if (!intel_pll_is_valid(to_i915(dev),
+								limit,
+								&clock))
+						continue;
+
+					this_err = abs(clock.dot - target);
+					if (this_err < err_most) {
+						*best_clock = clock;
+						err_most = this_err;
+						max_n = clock.n;
+						found = true;
+					}
+				}
+			}
+		}
+	}
+	return found;
+}
+
+/*
+ * Check if the calculated PLL configuration is more optimal compared to the
+ * best configuration and error found so far. Return the calculated error.
+ */
+static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
+			       const struct dpll *calculated_clock,
+			       const struct dpll *best_clock,
+			       unsigned int best_error_ppm,
+			       unsigned int *error_ppm)
+{
+	/*
+	 * For CHV ignore the error and consider only the P value.
+	 * Prefer a bigger P value based on HW requirements.
+	 */
+	if (IS_CHERRYVIEW(to_i915(dev))) {
+		*error_ppm = 0;
+
+		return calculated_clock->p > best_clock->p;
+	}
+
+	if (drm_WARN_ON_ONCE(dev, !target_freq))
+		return false;
+
+	*error_ppm = div_u64(1000000ULL *
+				abs(target_freq - calculated_clock->dot),
+			     target_freq);
+	/*
+	 * Prefer a better P value over a better (smaller) error if the error
+	 * is small. Ensure this preference for future configurations too by
+	 * setting the error to 0.
+	 */
+	if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
+		*error_ppm = 0;
+
+		return true;
+	}
+
+	return *error_ppm + 10 < best_error_ppm;
+}
+
+/*
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE.  The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ */
+static bool
+vlv_find_best_dpll(const struct intel_limit *limit,
+		   struct intel_crtc_state *crtc_state,
+		   int target, int refclk, struct dpll *match_clock,
+		   struct dpll *best_clock)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_device *dev = crtc->base.dev;
+	struct dpll clock;
+	unsigned int bestppm = 1000000;
+	/* min update 19.2 MHz */
+	int max_n = min(limit->n.max, refclk / 19200);
+	bool found = false;
+
+	target *= 5; /* fast clock */
+
+	memset(best_clock, 0, sizeof(*best_clock));
+
+	/* based on hardware requirement, prefer smaller n to precision */
+	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
+		for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
+			for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
+			     clock.p2 -= clock.p2 > 10 ? 2 : 1) {
+				clock.p = clock.p1 * clock.p2;
+				/* based on hardware requirement, prefer bigger m1,m2 values */
+				for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
+					unsigned int ppm;
+
+					clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
+								     refclk * clock.m1);
+
+					vlv_calc_dpll_params(refclk, &clock);
+
+					if (!intel_pll_is_valid(to_i915(dev),
+								limit,
+								&clock))
+						continue;
+
+					if (!vlv_PLL_is_optimal(dev, target,
+								&clock,
+								best_clock,
+								bestppm, &ppm))
+						continue;
+
+					*best_clock = clock;
+					bestppm = ppm;
+					found = true;
+				}
+			}
+		}
+	}
+
+	return found;
+}
+
+/*
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE.  The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ */
+static bool
+chv_find_best_dpll(const struct intel_limit *limit,
+		   struct intel_crtc_state *crtc_state,
+		   int target, int refclk, struct dpll *match_clock,
+		   struct dpll *best_clock)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_device *dev = crtc->base.dev;
+	unsigned int best_error_ppm;
+	struct dpll clock;
+	u64 m2;
+	int found = false;
+
+	memset(best_clock, 0, sizeof(*best_clock));
+	best_error_ppm = 1000000;
+
+	/*
+	 * Based on hardware doc, the n always set to 1, and m1 always
+	 * set to 2.  If requires to support 200Mhz refclk, we need to
+	 * revisit this because n may not 1 anymore.
+	 */
+	clock.n = 1;
+	clock.m1 = 2;
+	target *= 5;	/* fast clock */
+
+	for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
+		for (clock.p2 = limit->p2.p2_fast;
+				clock.p2 >= limit->p2.p2_slow;
+				clock.p2 -= clock.p2 > 10 ? 2 : 1) {
+			unsigned int error_ppm;
+
+			clock.p = clock.p1 * clock.p2;
+
+			m2 = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(target, clock.p * clock.n) << 22,
+						   refclk * clock.m1);
+
+			if (m2 > INT_MAX/clock.m1)
+				continue;
+
+			clock.m2 = m2;
+
+			chv_calc_dpll_params(refclk, &clock);
+
+			if (!intel_pll_is_valid(to_i915(dev), limit, &clock))
+				continue;
+
+			if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
+						best_error_ppm, &error_ppm))
+				continue;
+
+			*best_clock = clock;
+			best_error_ppm = error_ppm;
+			found = true;
+		}
+	}
+
+	return found;
+}
+
+bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state,
+			struct dpll *best_clock)
+{
+	int refclk = 100000;
+	const struct intel_limit *limit = &intel_limits_bxt;
+
+	return chv_find_best_dpll(limit, crtc_state,
+				  crtc_state->port_clock, refclk,
+				  NULL, best_clock);
+}
+
+static u32 pnv_dpll_compute_fp(struct dpll *dpll)
+{
+	return (1 << dpll->n) << 16 | dpll->m2;
+}
+
+static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
+				     struct intel_crtc_state *crtc_state,
+				     struct dpll *reduced_clock)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	u32 fp, fp2 = 0;
+
+	if (IS_PINEVIEW(dev_priv)) {
+		fp = pnv_dpll_compute_fp(&crtc_state->dpll);
+		if (reduced_clock)
+			fp2 = pnv_dpll_compute_fp(reduced_clock);
+	} else {
+		fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
+		if (reduced_clock)
+			fp2 = i9xx_dpll_compute_fp(reduced_clock);
+	}
+
+	crtc_state->dpll_hw_state.fp0 = fp;
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
+	    reduced_clock) {
+		crtc_state->dpll_hw_state.fp1 = fp2;
+	} else {
+		crtc_state->dpll_hw_state.fp1 = fp;
+	}
+}
+
+static void i9xx_compute_dpll(struct intel_crtc *crtc,
+			      struct intel_crtc_state *crtc_state,
+			      struct dpll *reduced_clock)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	u32 dpll;
+	struct dpll *clock = &crtc_state->dpll;
+
+	i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
+
+	dpll = DPLL_VGA_MODE_DIS;
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
+		dpll |= DPLLB_MODE_LVDS;
+	else
+		dpll |= DPLLB_MODE_DAC_SERIAL;
+
+	if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
+	    IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) {
+		dpll |= (crtc_state->pixel_multiplier - 1)
+			<< SDVO_MULTIPLIER_SHIFT_HIRES;
+	}
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
+	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
+		dpll |= DPLL_SDVO_HIGH_SPEED;
+
+	if (intel_crtc_has_dp_encoder(crtc_state))
+		dpll |= DPLL_SDVO_HIGH_SPEED;
+
+	/* compute bitmask from p1 value */
+	if (IS_PINEVIEW(dev_priv))
+		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
+	else {
+		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+		if (IS_G4X(dev_priv) && reduced_clock)
+			dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+	}
+	switch (clock->p2) {
+	case 5:
+		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+		break;
+	case 7:
+		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+		break;
+	case 10:
+		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+		break;
+	case 14:
+		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+		break;
+	}
+	if (INTEL_GEN(dev_priv) >= 4)
+		dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+
+	if (crtc_state->sdvo_tv_clock)
+		dpll |= PLL_REF_INPUT_TVCLKINBC;
+	else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
+		 intel_panel_use_ssc(dev_priv))
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	dpll |= DPLL_VCO_ENABLE;
+	crtc_state->dpll_hw_state.dpll = dpll;
+
+	if (INTEL_GEN(dev_priv) >= 4) {
+		u32 dpll_md = (crtc_state->pixel_multiplier - 1)
+			<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
+		crtc_state->dpll_hw_state.dpll_md = dpll_md;
+	}
+}
+
+static void i8xx_compute_dpll(struct intel_crtc *crtc,
+			      struct intel_crtc_state *crtc_state,
+			      struct dpll *reduced_clock)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	u32 dpll;
+	struct dpll *clock = &crtc_state->dpll;
+
+	i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
+
+	dpll = DPLL_VGA_MODE_DIS;
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+	} else {
+		if (clock->p1 == 2)
+			dpll |= PLL_P1_DIVIDE_BY_TWO;
+		else
+			dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+		if (clock->p2 == 4)
+			dpll |= PLL_P2_DIVIDE_BY_4;
+	}
+
+	/*
+	 * Bspec:
+	 * "[Almador Errata}: For the correct operation of the muxed DVO pins
+	 *  (GDEVSELB/I2Cdata, GIRDBY/I2CClk) and (GFRAMEB/DVI_Data,
+	 *  GTRDYB/DVI_Clk): Bit 31 (DPLL VCO Enable) and Bit 30 (2X Clock
+	 *  Enable) must be set to “1” in both the DPLL A Control Register
+	 *  (06014h-06017h) and DPLL B Control Register (06018h-0601Bh)."
+	 *
+	 * For simplicity We simply keep both bits always enabled in
+	 * both DPLLS. The spec says we should disable the DVO 2X clock
+	 * when not needed, but this seems to work fine in practice.
+	 */
+	if (IS_I830(dev_priv) ||
+	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO))
+		dpll |= DPLL_DVO_2X_MODE;
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
+	    intel_panel_use_ssc(dev_priv))
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	dpll |= DPLL_VCO_ENABLE;
+	crtc_state->dpll_hw_state.dpll = dpll;
+}
+
+static int hsw_crtc_compute_clock(struct intel_crtc *crtc,
+				  struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	struct intel_atomic_state *state =
+		to_intel_atomic_state(crtc_state->uapi.state);
+
+	if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) ||
+	    INTEL_GEN(dev_priv) >= 11) {
+		struct intel_encoder *encoder =
+			intel_get_crtc_new_encoder(state, crtc_state);
+
+		if (!intel_reserve_shared_dplls(state, crtc, encoder)) {
+			drm_dbg_kms(&dev_priv->drm,
+				    "failed to find PLL for pipe %c\n",
+				    pipe_name(crtc->pipe));
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static bool ilk_needs_fb_cb_tune(struct dpll *dpll, int factor)
+{
+	return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
+}
+
+
+static void ilk_compute_dpll(struct intel_crtc *crtc,
+			     struct intel_crtc_state *crtc_state,
+			     struct dpll *reduced_clock)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	u32 dpll, fp, fp2;
+	int factor;
+
+	/* Enable autotuning of the PLL clock (if permissible) */
+	factor = 21;
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+		if ((intel_panel_use_ssc(dev_priv) &&
+		     dev_priv->vbt.lvds_ssc_freq == 100000) ||
+		    (HAS_PCH_IBX(dev_priv) &&
+		     intel_is_dual_link_lvds(dev_priv)))
+			factor = 25;
+	} else if (crtc_state->sdvo_tv_clock) {
+		factor = 20;
+	}
+
+	fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
+
+	if (ilk_needs_fb_cb_tune(&crtc_state->dpll, factor))
+		fp |= FP_CB_TUNE;
+
+	if (reduced_clock) {
+		fp2 = i9xx_dpll_compute_fp(reduced_clock);
+
+		if (reduced_clock->m < factor * reduced_clock->n)
+			fp2 |= FP_CB_TUNE;
+	} else {
+		fp2 = fp;
+	}
+
+	dpll = 0;
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
+		dpll |= DPLLB_MODE_LVDS;
+	else
+		dpll |= DPLLB_MODE_DAC_SERIAL;
+
+	dpll |= (crtc_state->pixel_multiplier - 1)
+		<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
+	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
+		dpll |= DPLL_SDVO_HIGH_SPEED;
+
+	if (intel_crtc_has_dp_encoder(crtc_state))
+		dpll |= DPLL_SDVO_HIGH_SPEED;
+
+	/*
+	 * The high speed IO clock is only really required for
+	 * SDVO/HDMI/DP, but we also enable it for CRT to make it
+	 * possible to share the DPLL between CRT and HDMI. Enabling
+	 * the clock needlessly does no real harm, except use up a
+	 * bit of power potentially.
+	 *
+	 * We'll limit this to IVB with 3 pipes, since it has only two
+	 * DPLLs and so DPLL sharing is the only way to get three pipes
+	 * driving PCH ports at the same time. On SNB we could do this,
+	 * and potentially avoid enabling the second DPLL, but it's not
+	 * clear if it''s a win or loss power wise. No point in doing
+	 * this on ILK at all since it has a fixed DPLL<->pipe mapping.
+	 */
+	if (INTEL_NUM_PIPES(dev_priv) == 3 &&
+	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG))
+		dpll |= DPLL_SDVO_HIGH_SPEED;
+
+	/* compute bitmask from p1 value */
+	dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+	/* also FPA1 */
+	dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+
+	switch (crtc_state->dpll.p2) {
+	case 5:
+		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+		break;
+	case 7:
+		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+		break;
+	case 10:
+		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+		break;
+	case 14:
+		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+		break;
+	}
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
+	    intel_panel_use_ssc(dev_priv))
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	dpll |= DPLL_VCO_ENABLE;
+
+	crtc_state->dpll_hw_state.dpll = dpll;
+	crtc_state->dpll_hw_state.fp0 = fp;
+	crtc_state->dpll_hw_state.fp1 = fp2;
+}
+
+static int ilk_crtc_compute_clock(struct intel_crtc *crtc,
+				  struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	struct intel_atomic_state *state =
+		to_intel_atomic_state(crtc_state->uapi.state);
+	const struct intel_limit *limit;
+	int refclk = 120000;
+
+	memset(&crtc_state->dpll_hw_state, 0,
+	       sizeof(crtc_state->dpll_hw_state));
+
+	/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
+	if (!crtc_state->has_pch_encoder)
+		return 0;
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+		if (intel_panel_use_ssc(dev_priv)) {
+			drm_dbg_kms(&dev_priv->drm,
+				    "using SSC reference clock of %d kHz\n",
+				    dev_priv->vbt.lvds_ssc_freq);
+			refclk = dev_priv->vbt.lvds_ssc_freq;
+		}
+
+		if (intel_is_dual_link_lvds(dev_priv)) {
+			if (refclk == 100000)
+				limit = &ilk_limits_dual_lvds_100m;
+			else
+				limit = &ilk_limits_dual_lvds;
+		} else {
+			if (refclk == 100000)
+				limit = &ilk_limits_single_lvds_100m;
+			else
+				limit = &ilk_limits_single_lvds;
+		}
+	} else {
+		limit = &ilk_limits_dac;
+	}
+
+	if (!crtc_state->clock_set &&
+	    !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
+				refclk, NULL, &crtc_state->dpll)) {
+		drm_err(&dev_priv->drm,
+			"Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	ilk_compute_dpll(crtc, crtc_state, NULL);
+
+	if (!intel_reserve_shared_dplls(state, crtc, NULL)) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "failed to find PLL for pipe %c\n",
+			    pipe_name(crtc->pipe));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void vlv_compute_dpll(struct intel_crtc *crtc,
+		      struct intel_crtc_state *pipe_config)
+{
+	pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
+		DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
+	if (crtc->pipe != PIPE_A)
+		pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
+
+	/* DPLL not used with DSI, but still need the rest set up */
+	if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
+		pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
+			DPLL_EXT_BUFFER_ENABLE_VLV;
+
+	pipe_config->dpll_hw_state.dpll_md =
+		(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+}
+
+void chv_compute_dpll(struct intel_crtc *crtc,
+		      struct intel_crtc_state *pipe_config)
+{
+	pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
+		DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
+	if (crtc->pipe != PIPE_A)
+		pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
+
+	/* DPLL not used with DSI, but still need the rest set up */
+	if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
+		pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;
+
+	pipe_config->dpll_hw_state.dpll_md =
+		(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+}
+
+static int chv_crtc_compute_clock(struct intel_crtc *crtc,
+				  struct intel_crtc_state *crtc_state)
+{
+	int refclk = 100000;
+	const struct intel_limit *limit = &intel_limits_chv;
+	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
+
+	memset(&crtc_state->dpll_hw_state, 0,
+	       sizeof(crtc_state->dpll_hw_state));
+
+	if (!crtc_state->clock_set &&
+	    !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
+				refclk, NULL, &crtc_state->dpll)) {
+		drm_err(&i915->drm, "Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	chv_compute_dpll(crtc, crtc_state);
+
+	return 0;
+}
+
+static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
+				  struct intel_crtc_state *crtc_state)
+{
+	int refclk = 100000;
+	const struct intel_limit *limit = &intel_limits_vlv;
+	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
+
+	memset(&crtc_state->dpll_hw_state, 0,
+	       sizeof(crtc_state->dpll_hw_state));
+
+	if (!crtc_state->clock_set &&
+	    !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
+				refclk, NULL, &crtc_state->dpll)) {
+		drm_err(&i915->drm,  "Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	vlv_compute_dpll(crtc, crtc_state);
+
+	return 0;
+}
+
+static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
+				  struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	const struct intel_limit *limit;
+	int refclk = 96000;
+
+	memset(&crtc_state->dpll_hw_state, 0,
+	       sizeof(crtc_state->dpll_hw_state));
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+		if (intel_panel_use_ssc(dev_priv)) {
+			refclk = dev_priv->vbt.lvds_ssc_freq;
+			drm_dbg_kms(&dev_priv->drm,
+				    "using SSC reference clock of %d kHz\n",
+				    refclk);
+		}
+
+		if (intel_is_dual_link_lvds(dev_priv))
+			limit = &intel_limits_g4x_dual_channel_lvds;
+		else
+			limit = &intel_limits_g4x_single_channel_lvds;
+	} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) ||
+		   intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
+		limit = &intel_limits_g4x_hdmi;
+	} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) {
+		limit = &intel_limits_g4x_sdvo;
+	} else {
+		/* The option is for other outputs */
+		limit = &intel_limits_i9xx_sdvo;
+	}
+
+	if (!crtc_state->clock_set &&
+	    !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
+				refclk, NULL, &crtc_state->dpll)) {
+		drm_err(&dev_priv->drm,
+			"Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	i9xx_compute_dpll(crtc, crtc_state, NULL);
+
+	return 0;
+}
+
+static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
+				  struct intel_crtc_state *crtc_state)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	const struct intel_limit *limit;
+	int refclk = 96000;
+
+	memset(&crtc_state->dpll_hw_state, 0,
+	       sizeof(crtc_state->dpll_hw_state));
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+		if (intel_panel_use_ssc(dev_priv)) {
+			refclk = dev_priv->vbt.lvds_ssc_freq;
+			drm_dbg_kms(&dev_priv->drm,
+				    "using SSC reference clock of %d kHz\n",
+				    refclk);
+		}
+
+		limit = &pnv_limits_lvds;
+	} else {
+		limit = &pnv_limits_sdvo;
+	}
+
+	if (!crtc_state->clock_set &&
+	    !pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
+				refclk, NULL, &crtc_state->dpll)) {
+		drm_err(&dev_priv->drm,
+			"Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	i9xx_compute_dpll(crtc, crtc_state, NULL);
+
+	return 0;
+}
+
+static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
+				   struct intel_crtc_state *crtc_state)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	const struct intel_limit *limit;
+	int refclk = 96000;
+
+	memset(&crtc_state->dpll_hw_state, 0,
+	       sizeof(crtc_state->dpll_hw_state));
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+		if (intel_panel_use_ssc(dev_priv)) {
+			refclk = dev_priv->vbt.lvds_ssc_freq;
+			drm_dbg_kms(&dev_priv->drm,
+				    "using SSC reference clock of %d kHz\n",
+				    refclk);
+		}
+
+		limit = &intel_limits_i9xx_lvds;
+	} else {
+		limit = &intel_limits_i9xx_sdvo;
+	}
+
+	if (!crtc_state->clock_set &&
+	    !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
+				 refclk, NULL, &crtc_state->dpll)) {
+		drm_err(&dev_priv->drm,
+			"Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	i9xx_compute_dpll(crtc, crtc_state, NULL);
+
+	return 0;
+}
+
+static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
+				   struct intel_crtc_state *crtc_state)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	const struct intel_limit *limit;
+	int refclk = 48000;
+
+	memset(&crtc_state->dpll_hw_state, 0,
+	       sizeof(crtc_state->dpll_hw_state));
+
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
+		if (intel_panel_use_ssc(dev_priv)) {
+			refclk = dev_priv->vbt.lvds_ssc_freq;
+			drm_dbg_kms(&dev_priv->drm,
+				    "using SSC reference clock of %d kHz\n",
+				    refclk);
+		}
+
+		limit = &intel_limits_i8xx_lvds;
+	} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) {
+		limit = &intel_limits_i8xx_dvo;
+	} else {
+		limit = &intel_limits_i8xx_dac;
+	}
+
+	if (!crtc_state->clock_set &&
+	    !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
+				 refclk, NULL, &crtc_state->dpll)) {
+		drm_err(&dev_priv->drm,
+			"Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	i8xx_compute_dpll(crtc, crtc_state, NULL);
+
+	return 0;
+}
+
+void
+intel_dpll_init_clock_hook(struct drm_i915_private *dev_priv)
+{
+	if (INTEL_GEN(dev_priv) >= 9 || HAS_DDI(dev_priv))
+		dev_priv->display.crtc_compute_clock = hsw_crtc_compute_clock;
+	else if (HAS_PCH_SPLIT(dev_priv))
+		dev_priv->display.crtc_compute_clock = ilk_crtc_compute_clock;
+	else if (IS_CHERRYVIEW(dev_priv))
+		dev_priv->display.crtc_compute_clock = chv_crtc_compute_clock;
+	else if (IS_VALLEYVIEW(dev_priv))
+		dev_priv->display.crtc_compute_clock = vlv_crtc_compute_clock;
+	else if (IS_G4X(dev_priv))
+		dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock;
+	else if (IS_PINEVIEW(dev_priv))
+		dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock;
+	else if (!IS_GEN(dev_priv, 2))
+		dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
+	else
+		dev_priv->display.crtc_compute_clock = i8xx_crtc_compute_clock;
+}
diff --git a/drivers/gpu/drm/i915/display/intel_dpll.h b/drivers/gpu/drm/i915/display/intel_dpll.h
new file mode 100644
index 000000000000..caf4615092e1
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_dpll.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+
+#ifndef _INTEL_DPLL_H_
+#define _INTEL_DPLL_H_
+
+struct dpll;
+struct drm_i915_private;
+struct intel_crtc;
+struct intel_crtc_state;
+
+void intel_dpll_init_clock_hook(struct drm_i915_private *dev_priv);
+int vlv_calc_dpll_params(int refclk, struct dpll *clock);
+int pnv_calc_dpll_params(int refclk, struct dpll *clock);
+int i9xx_calc_dpll_params(int refclk, struct dpll *clock);
+void vlv_compute_dpll(struct intel_crtc *crtc,
+		      struct intel_crtc_state *pipe_config);
+void chv_compute_dpll(struct intel_crtc *crtc,
+		      struct intel_crtc_state *pipe_config);
+
+#endif
-- 
2.27.0