[Intel-gfx] [PATCH 09/10] drm/i915: refactor skylake scaler code into new file.

Dave Airlie airlied at gmail.com
Wed Jan 27 03:05:47 UTC 2021


From: Dave Airlie <airlied at redhat.com>

This moves the code from various places and consolidates it
into one new file.

Signed-off-by: Dave Airlie <airlied at redhat.com>
---
 drivers/gpu/drm/i915/Makefile                 |   1 +
 drivers/gpu/drm/i915/display/icl_dsi.c        |   1 +
 drivers/gpu/drm/i915/display/intel_atomic.c   |   2 +-
 drivers/gpu/drm/i915/display/intel_ddi.c      |   1 +
 drivers/gpu/drm/i915/display/intel_display.c  | 429 +--------------
 drivers/gpu/drm/i915/display/intel_display.h  |   6 -
 drivers/gpu/drm/i915/display/intel_dp_mst.c   |   1 +
 drivers/gpu/drm/i915/display/intel_sprite.c   |  62 ---
 drivers/gpu/drm/i915/display/intel_sprite.h   |   7 -
 drivers/gpu/drm/i915/display/skl_scaler.c     | 497 ++++++++++++++++++
 drivers/gpu/drm/i915/display/skl_scaler.h     |  32 ++
 .../drm/i915/display/skl_universal_plane.c    |   1 +
 .../drm/i915/display/skl_universal_plane.h    |   4 +
 drivers/gpu/drm/i915/display/vlv_dsi.c        |   1 +
 14 files changed, 541 insertions(+), 504 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/display/skl_scaler.c
 create mode 100644 drivers/gpu/drm/i915/display/skl_scaler.h

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 40cba6f0792d..b4f0c0942fc9 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -224,6 +224,7 @@ i915-y += \
 	display/intel_tc.o \
 	display/intel_vga.o \
 	display/i9xx_plane.o \
+	display/skl_scaler.o \
 	display/skl_universal_plane.o
 i915-$(CONFIG_ACPI) += \
 	display/intel_acpi.o \
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 9eeec6fadec7..7ef6b89c79d9 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -35,6 +35,7 @@
 #include "intel_dsi.h"
 #include "intel_panel.h"
 #include "intel_vdsc.h"
+#include "skl_scaler.h"
 #include "skl_universal_plane.h"
 
 static int header_credits_available(struct drm_i915_private *dev_priv,
diff --git a/drivers/gpu/drm/i915/display/intel_atomic.c b/drivers/gpu/drm/i915/display/intel_atomic.c
index e00fdc47c0eb..27f7d7109ca3 100644
--- a/drivers/gpu/drm/i915/display/intel_atomic.c
+++ b/drivers/gpu/drm/i915/display/intel_atomic.c
@@ -40,7 +40,7 @@
 #include "intel_global_state.h"
 #include "intel_hdcp.h"
 #include "intel_psr.h"
-#include "intel_sprite.h"
+#include "skl_universal_plane.h"
 
 /**
  * intel_digital_connector_atomic_get_property - hook for connector->atomic_get_property.
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 4c045b1231d3..6f57fc8a3f6d 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -54,6 +54,7 @@
 #include "intel_tc.h"
 #include "intel_vdsc.h"
 #include "intel_vrr.h"
+#include "skl_scaler.h"
 #include "skl_universal_plane.h"
 
 static const u8 index_to_dp_signal_levels[] = {
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index c1003b0c59e8..b025af8a98c1 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -94,6 +94,7 @@
 #include "intel_tc.h"
 #include "intel_vga.h"
 #include "i9xx_plane.h"
+#include "skl_scaler.h"
 #include "skl_universal_plane.h"
 
 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
@@ -2508,47 +2509,6 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
 		  &to_intel_frontbuffer(fb)->bits);
 }
 
-static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
-{
-	struct drm_device *dev = intel_crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	unsigned long irqflags;
-
-	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
-
-	intel_de_write_fw(dev_priv, SKL_PS_CTRL(intel_crtc->pipe, id), 0);
-	intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
-	intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
-
-	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
-}
-
-/*
- * This function detaches (aka. unbinds) unused scalers in hardware
- */
-static void skl_detach_scalers(const struct intel_crtc_state *crtc_state)
-{
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc);
-	const struct intel_crtc_scaler_state *scaler_state =
-		&crtc_state->scaler_state;
-	int i;
-
-	/* loop through and disable scalers that aren't in use */
-	for (i = 0; i < intel_crtc->num_scalers; i++) {
-		if (!scaler_state->scalers[i].in_use)
-			skl_detach_scaler(intel_crtc, i);
-	}
-}
-
-void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state)
-{
-	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
-	int i;
-
-	for (i = 0; i < crtc->num_scalers; i++)
-		skl_detach_scaler(crtc, i);
-}
-
 unsigned int
 intel_plane_fence_y_offset(const struct intel_plane_state *plane_state)
 {
@@ -3124,393 +3084,6 @@ static void cpt_verify_modeset(struct drm_i915_private *dev_priv,
 	}
 }
 
-/*
- * The hardware phase 0.0 refers to the center of the pixel.
- * We want to start from the top/left edge which is phase
- * -0.5. That matches how the hardware calculates the scaling
- * factors (from top-left of the first pixel to bottom-right
- * of the last pixel, as opposed to the pixel centers).
- *
- * For 4:2:0 subsampled chroma planes we obviously have to
- * adjust that so that the chroma sample position lands in
- * the right spot.
- *
- * Note that for packed YCbCr 4:2:2 formats there is no way to
- * control chroma siting. The hardware simply replicates the
- * chroma samples for both of the luma samples, and thus we don't
- * actually get the expected MPEG2 chroma siting convention :(
- * The same behaviour is observed on pre-SKL platforms as well.
- *
- * Theory behind the formula (note that we ignore sub-pixel
- * source coordinates):
- * s = source sample position
- * d = destination sample position
- *
- * Downscaling 4:1:
- * -0.5
- * | 0.0
- * | |     1.5 (initial phase)
- * | |     |
- * v v     v
- * | s | s | s | s |
- * |       d       |
- *
- * Upscaling 1:4:
- * -0.5
- * | -0.375 (initial phase)
- * | |     0.0
- * | |     |
- * v v     v
- * |       s       |
- * | d | d | d | d |
- */
-u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_cosited)
-{
-	int phase = -0x8000;
-	u16 trip = 0;
-
-	if (chroma_cosited)
-		phase += (sub - 1) * 0x8000 / sub;
-
-	phase += scale / (2 * sub);
-
-	/*
-	 * Hardware initial phase limited to [-0.5:1.5].
-	 * Since the max hardware scale factor is 3.0, we
-	 * should never actually excdeed 1.0 here.
-	 */
-	WARN_ON(phase < -0x8000 || phase > 0x18000);
-
-	if (phase < 0)
-		phase = 0x10000 + phase;
-	else
-		trip = PS_PHASE_TRIP;
-
-	return ((phase >> 2) & PS_PHASE_MASK) | trip;
-}
-
-#define SKL_MIN_SRC_W 8
-#define SKL_MAX_SRC_W 4096
-#define SKL_MIN_SRC_H 8
-#define SKL_MAX_SRC_H 4096
-#define SKL_MIN_DST_W 8
-#define SKL_MAX_DST_W 4096
-#define SKL_MIN_DST_H 8
-#define SKL_MAX_DST_H 4096
-#define ICL_MAX_SRC_W 5120
-#define ICL_MAX_SRC_H 4096
-#define ICL_MAX_DST_W 5120
-#define ICL_MAX_DST_H 4096
-#define SKL_MIN_YUV_420_SRC_W 16
-#define SKL_MIN_YUV_420_SRC_H 16
-
-static int
-skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
-		  unsigned int scaler_user, int *scaler_id,
-		  int src_w, int src_h, int dst_w, int dst_h,
-		  const struct drm_format_info *format,
-		  u64 modifier, bool need_scaler)
-{
-	struct intel_crtc_scaler_state *scaler_state =
-		&crtc_state->scaler_state;
-	struct intel_crtc *intel_crtc =
-		to_intel_crtc(crtc_state->uapi.crtc);
-	struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
-	const struct drm_display_mode *adjusted_mode =
-		&crtc_state->hw.adjusted_mode;
-
-	/*
-	 * Src coordinates are already rotated by 270 degrees for
-	 * the 90/270 degree plane rotation cases (to match the
-	 * GTT mapping), hence no need to account for rotation here.
-	 */
-	if (src_w != dst_w || src_h != dst_h)
-		need_scaler = true;
-
-	/*
-	 * Scaling/fitting not supported in IF-ID mode in GEN9+
-	 * TODO: Interlace fetch mode doesn't support YUV420 planar formats.
-	 * Once NV12 is enabled, handle it here while allocating scaler
-	 * for NV12.
-	 */
-	if (INTEL_GEN(dev_priv) >= 9 && crtc_state->hw.enable &&
-	    need_scaler && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "Pipe/Plane scaling not supported with IF-ID mode\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * if plane is being disabled or scaler is no more required or force detach
-	 *  - free scaler binded to this plane/crtc
-	 *  - in order to do this, update crtc->scaler_usage
-	 *
-	 * Here scaler state in crtc_state is set free so that
-	 * scaler can be assigned to other user. Actual register
-	 * update to free the scaler is done in plane/panel-fit programming.
-	 * For this purpose crtc/plane_state->scaler_id isn't reset here.
-	 */
-	if (force_detach || !need_scaler) {
-		if (*scaler_id >= 0) {
-			scaler_state->scaler_users &= ~(1 << scaler_user);
-			scaler_state->scalers[*scaler_id].in_use = 0;
-
-			drm_dbg_kms(&dev_priv->drm,
-				    "scaler_user index %u.%u: "
-				    "Staged freeing scaler id %d scaler_users = 0x%x\n",
-				    intel_crtc->pipe, scaler_user, *scaler_id,
-				    scaler_state->scaler_users);
-			*scaler_id = -1;
-		}
-		return 0;
-	}
-
-	if (format && intel_format_info_is_yuv_semiplanar(format, modifier) &&
-	    (src_h < SKL_MIN_YUV_420_SRC_H || src_w < SKL_MIN_YUV_420_SRC_W)) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "Planar YUV: src dimensions not met\n");
-		return -EINVAL;
-	}
-
-	/* range checks */
-	if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
-	    dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
-	    (INTEL_GEN(dev_priv) >= 11 &&
-	     (src_w > ICL_MAX_SRC_W || src_h > ICL_MAX_SRC_H ||
-	      dst_w > ICL_MAX_DST_W || dst_h > ICL_MAX_DST_H)) ||
-	    (INTEL_GEN(dev_priv) < 11 &&
-	     (src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
-	      dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H)))	{
-		drm_dbg_kms(&dev_priv->drm,
-			    "scaler_user index %u.%u: src %ux%u dst %ux%u "
-			    "size is out of scaler range\n",
-			    intel_crtc->pipe, scaler_user, src_w, src_h,
-			    dst_w, dst_h);
-		return -EINVAL;
-	}
-
-	/* mark this plane as a scaler user in crtc_state */
-	scaler_state->scaler_users |= (1 << scaler_user);
-	drm_dbg_kms(&dev_priv->drm, "scaler_user index %u.%u: "
-		    "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
-		    intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
-		    scaler_state->scaler_users);
-
-	return 0;
-}
-
-static int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state)
-{
-	const struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode;
-	int width, height;
-
-	if (crtc_state->pch_pfit.enabled) {
-		width = drm_rect_width(&crtc_state->pch_pfit.dst);
-		height = drm_rect_height(&crtc_state->pch_pfit.dst);
-	} else {
-		width = pipe_mode->crtc_hdisplay;
-		height = pipe_mode->crtc_vdisplay;
-	}
-	return skl_update_scaler(crtc_state, !crtc_state->hw.active,
-				 SKL_CRTC_INDEX,
-				 &crtc_state->scaler_state.scaler_id,
-				 crtc_state->pipe_src_w, crtc_state->pipe_src_h,
-				 width, height, NULL, 0,
-				 crtc_state->pch_pfit.enabled);
-}
-
-/**
- * skl_update_scaler_plane - Stages update to scaler state for a given plane.
- * @crtc_state: crtc's scaler state
- * @plane_state: atomic plane state to update
- *
- * Return
- *     0 - scaler_usage updated successfully
- *    error - requested scaling cannot be supported or other error condition
- */
-static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
-				   struct intel_plane_state *plane_state)
-{
-	struct intel_plane *intel_plane =
-		to_intel_plane(plane_state->uapi.plane);
-	struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev);
-	struct drm_framebuffer *fb = plane_state->hw.fb;
-	int ret;
-	bool force_detach = !fb || !plane_state->uapi.visible;
-	bool need_scaler = false;
-
-	/* Pre-gen11 and SDR planes always need a scaler for planar formats. */
-	if (!icl_is_hdr_plane(dev_priv, intel_plane->id) &&
-	    fb && intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier))
-		need_scaler = true;
-
-	ret = skl_update_scaler(crtc_state, force_detach,
-				drm_plane_index(&intel_plane->base),
-				&plane_state->scaler_id,
-				drm_rect_width(&plane_state->uapi.src) >> 16,
-				drm_rect_height(&plane_state->uapi.src) >> 16,
-				drm_rect_width(&plane_state->uapi.dst),
-				drm_rect_height(&plane_state->uapi.dst),
-				fb ? fb->format : NULL,
-				fb ? fb->modifier : 0,
-				need_scaler);
-
-	if (ret || plane_state->scaler_id < 0)
-		return ret;
-
-	/* check colorkey */
-	if (plane_state->ckey.flags) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "[PLANE:%d:%s] scaling with color key not allowed",
-			    intel_plane->base.base.id,
-			    intel_plane->base.name);
-		return -EINVAL;
-	}
-
-	/* Check src format */
-	switch (fb->format->format) {
-	case DRM_FORMAT_RGB565:
-	case DRM_FORMAT_XBGR8888:
-	case DRM_FORMAT_XRGB8888:
-	case DRM_FORMAT_ABGR8888:
-	case DRM_FORMAT_ARGB8888:
-	case DRM_FORMAT_XRGB2101010:
-	case DRM_FORMAT_XBGR2101010:
-	case DRM_FORMAT_ARGB2101010:
-	case DRM_FORMAT_ABGR2101010:
-	case DRM_FORMAT_YUYV:
-	case DRM_FORMAT_YVYU:
-	case DRM_FORMAT_UYVY:
-	case DRM_FORMAT_VYUY:
-	case DRM_FORMAT_NV12:
-	case DRM_FORMAT_XYUV8888:
-	case DRM_FORMAT_P010:
-	case DRM_FORMAT_P012:
-	case DRM_FORMAT_P016:
-	case DRM_FORMAT_Y210:
-	case DRM_FORMAT_Y212:
-	case DRM_FORMAT_Y216:
-	case DRM_FORMAT_XVYU2101010:
-	case DRM_FORMAT_XVYU12_16161616:
-	case DRM_FORMAT_XVYU16161616:
-		break;
-	case DRM_FORMAT_XBGR16161616F:
-	case DRM_FORMAT_ABGR16161616F:
-	case DRM_FORMAT_XRGB16161616F:
-	case DRM_FORMAT_ARGB16161616F:
-		if (INTEL_GEN(dev_priv) >= 11)
-			break;
-		fallthrough;
-	default:
-		drm_dbg_kms(&dev_priv->drm,
-			    "[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
-			    intel_plane->base.base.id, intel_plane->base.name,
-			    fb->base.id, fb->format->format);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int cnl_coef_tap(int i)
-{
-	return i % 7;
-}
-
-static u16 cnl_nearest_filter_coef(int t)
-{
-	return t == 3 ? 0x0800 : 0x3000;
-}
-
-/*
- *  Theory behind setting nearest-neighbor integer scaling:
- *
- *  17 phase of 7 taps requires 119 coefficients in 60 dwords per set.
- *  The letter represents the filter tap (D is the center tap) and the number
- *  represents the coefficient set for a phase (0-16).
- *
- *         +------------+------------------------+------------------------+
- *         |Index value | Data value coeffient 1 | Data value coeffient 2 |
- *         +------------+------------------------+------------------------+
- *         |   00h      |          B0            |          A0            |
- *         +------------+------------------------+------------------------+
- *         |   01h      |          D0            |          C0            |
- *         +------------+------------------------+------------------------+
- *         |   02h      |          F0            |          E0            |
- *         +------------+------------------------+------------------------+
- *         |   03h      |          A1            |          G0            |
- *         +------------+------------------------+------------------------+
- *         |   04h      |          C1            |          B1            |
- *         +------------+------------------------+------------------------+
- *         |   ...      |          ...           |          ...           |
- *         +------------+------------------------+------------------------+
- *         |   38h      |          B16           |          A16           |
- *         +------------+------------------------+------------------------+
- *         |   39h      |          D16           |          C16           |
- *         +------------+------------------------+------------------------+
- *         |   3Ah      |          F16           |          C16           |
- *         +------------+------------------------+------------------------+
- *         |   3Bh      |        Reserved        |          G16           |
- *         +------------+------------------------+------------------------+
- *
- *  To enable nearest-neighbor scaling:  program scaler coefficents with
- *  the center tap (Dxx) values set to 1 and all other values set to 0 as per
- *  SCALER_COEFFICIENT_FORMAT
- *
- */
-
-static void cnl_program_nearest_filter_coefs(struct drm_i915_private *dev_priv,
-					     enum pipe pipe, int id, int set)
-{
-	int i;
-
-	intel_de_write_fw(dev_priv, CNL_PS_COEF_INDEX_SET(pipe, id, set),
-			  PS_COEE_INDEX_AUTO_INC);
-
-	for (i = 0; i < 17 * 7; i += 2) {
-		u32 tmp;
-		int t;
-
-		t = cnl_coef_tap(i);
-		tmp = cnl_nearest_filter_coef(t);
-
-		t = cnl_coef_tap(i + 1);
-		tmp |= cnl_nearest_filter_coef(t) << 16;
-
-		intel_de_write_fw(dev_priv, CNL_PS_COEF_DATA_SET(pipe, id, set),
-				  tmp);
-	}
-
-	intel_de_write_fw(dev_priv, CNL_PS_COEF_INDEX_SET(pipe, id, set), 0);
-}
-
-u32 skl_scaler_get_filter_select(enum drm_scaling_filter filter, int set)
-{
-	if (filter == DRM_SCALING_FILTER_NEAREST_NEIGHBOR) {
-		return (PS_FILTER_PROGRAMMED |
-			PS_Y_VERT_FILTER_SELECT(set) |
-			PS_Y_HORZ_FILTER_SELECT(set) |
-			PS_UV_VERT_FILTER_SELECT(set) |
-			PS_UV_HORZ_FILTER_SELECT(set));
-	}
-
-	return PS_FILTER_MEDIUM;
-}
-
-void skl_scaler_setup_filter(struct drm_i915_private *dev_priv, enum pipe pipe,
-			     int id, int set, enum drm_scaling_filter filter)
-{
-	switch (filter) {
-	case DRM_SCALING_FILTER_DEFAULT:
-		break;
-	case DRM_SCALING_FILTER_NEAREST_NEIGHBOR:
-		cnl_program_nearest_filter_coefs(dev_priv, pipe, id, set);
-		break;
-	default:
-		MISSING_CASE(filter);
-	}
-}
-
 static void skl_pfit_enable(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index 1e0508bec3e5..efb5d95791f9 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -609,12 +609,6 @@ enum intel_display_power_domain
 intel_legacy_aux_to_power_domain(enum aux_ch aux_ch);
 void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
 				  struct intel_crtc_state *crtc_state);
-
-u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_center);
-void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state);
-u32 skl_scaler_get_filter_select(enum drm_scaling_filter filter, int set);
-void skl_scaler_setup_filter(struct drm_i915_private *dev_priv, enum pipe pipe,
-			     int id, int set, enum drm_scaling_filter filter);
 void ilk_pfit_disable(const struct intel_crtc_state *old_crtc_state);
 
 int bdw_get_pipemisc_bpp(struct intel_crtc *crtc);
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index d6a1b961a0e8..38618de0f48f 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -39,6 +39,7 @@
 #include "intel_dp_mst.h"
 #include "intel_dpio_phy.h"
 #include "intel_hdcp.h"
+#include "skl_scaler.h"
 
 static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
 					    struct intel_crtc_state *crtc_state,
diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c b/drivers/gpu/drm/i915/display/intel_sprite.c
index 355b9477265e..e5d9f87ded97 100644
--- a/drivers/gpu/drm/i915/display/intel_sprite.c
+++ b/drivers/gpu/drm/i915/display/intel_sprite.c
@@ -138,68 +138,6 @@ int intel_plane_check_src_coordinates(struct intel_plane_state *plane_state)
 	return 0;
 }
 
-void
-skl_program_scaler(struct intel_plane *plane,
-		   const struct intel_crtc_state *crtc_state,
-		   const struct intel_plane_state *plane_state)
-{
-	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
-	const struct drm_framebuffer *fb = plane_state->hw.fb;
-	enum pipe pipe = plane->pipe;
-	int scaler_id = plane_state->scaler_id;
-	const struct intel_scaler *scaler =
-		&crtc_state->scaler_state.scalers[scaler_id];
-	int crtc_x = plane_state->uapi.dst.x1;
-	int crtc_y = plane_state->uapi.dst.y1;
-	u32 crtc_w = drm_rect_width(&plane_state->uapi.dst);
-	u32 crtc_h = drm_rect_height(&plane_state->uapi.dst);
-	u16 y_hphase, uv_rgb_hphase;
-	u16 y_vphase, uv_rgb_vphase;
-	int hscale, vscale;
-	u32 ps_ctrl;
-
-	hscale = drm_rect_calc_hscale(&plane_state->uapi.src,
-				      &plane_state->uapi.dst,
-				      0, INT_MAX);
-	vscale = drm_rect_calc_vscale(&plane_state->uapi.src,
-				      &plane_state->uapi.dst,
-				      0, INT_MAX);
-
-	/* TODO: handle sub-pixel coordinates */
-	if (intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier) &&
-	    !icl_is_hdr_plane(dev_priv, plane->id)) {
-		y_hphase = skl_scaler_calc_phase(1, hscale, false);
-		y_vphase = skl_scaler_calc_phase(1, vscale, false);
-
-		/* MPEG2 chroma siting convention */
-		uv_rgb_hphase = skl_scaler_calc_phase(2, hscale, true);
-		uv_rgb_vphase = skl_scaler_calc_phase(2, vscale, false);
-	} else {
-		/* not used */
-		y_hphase = 0;
-		y_vphase = 0;
-
-		uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false);
-		uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false);
-	}
-
-	ps_ctrl = skl_scaler_get_filter_select(plane_state->hw.scaling_filter, 0);
-	ps_ctrl |= PS_SCALER_EN | PS_PLANE_SEL(plane->id) | scaler->mode;
-
-	skl_scaler_setup_filter(dev_priv, pipe, scaler_id, 0,
-				plane_state->hw.scaling_filter);
-
-	intel_de_write_fw(dev_priv, SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
-	intel_de_write_fw(dev_priv, SKL_PS_VPHASE(pipe, scaler_id),
-			  PS_Y_PHASE(y_vphase) | PS_UV_RGB_PHASE(uv_rgb_vphase));
-	intel_de_write_fw(dev_priv, SKL_PS_HPHASE(pipe, scaler_id),
-			  PS_Y_PHASE(y_hphase) | PS_UV_RGB_PHASE(uv_rgb_hphase));
-	intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(pipe, scaler_id),
-			  (crtc_x << 16) | crtc_y);
-	intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(pipe, scaler_id),
-			  (crtc_w << 16) | crtc_h);
-}
-
 static void i9xx_plane_linear_gamma(u16 gamma[8])
 {
 	/* The points are not evenly spaced. */
diff --git a/drivers/gpu/drm/i915/display/intel_sprite.h b/drivers/gpu/drm/i915/display/intel_sprite.h
index 418897f953fc..f6989da2dc4b 100644
--- a/drivers/gpu/drm/i915/display/intel_sprite.h
+++ b/drivers/gpu/drm/i915/display/intel_sprite.h
@@ -45,10 +45,6 @@ static inline u8 icl_hdr_plane_mask(void)
 		BIT(PLANE_SPRITE0) | BIT(PLANE_SPRITE1);
 }
 
-bool icl_is_nv12_y_plane(struct drm_i915_private *dev_priv,
-			 enum plane_id plane_id);
-bool icl_is_hdr_plane(struct drm_i915_private *dev_priv, enum plane_id plane_id);
-
 int ivb_plane_min_cdclk(const struct intel_crtc_state *crtc_state,
 			const struct intel_plane_state *plane_state);
 int hsw_plane_min_cdclk(const struct intel_crtc_state *crtc_state,
@@ -56,7 +52,4 @@ int hsw_plane_min_cdclk(const struct intel_crtc_state *crtc_state,
 int vlv_plane_min_cdclk(const struct intel_crtc_state *crtc_state,
 			const struct intel_plane_state *plane_state);
 
-void skl_program_scaler(struct intel_plane *plane,
-			const struct intel_crtc_state *crtc_state,
-			const struct intel_plane_state *plane_state);
 #endif /* __INTEL_SPRITE_H__ */
diff --git a/drivers/gpu/drm/i915/display/skl_scaler.c b/drivers/gpu/drm/i915/display/skl_scaler.c
new file mode 100644
index 000000000000..906a2fa79363
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/skl_scaler.c
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+#include "intel_display_types.h"
+#include "skl_scaler.h"
+#include "skl_universal_plane.h"
+
+/*
+ * The hardware phase 0.0 refers to the center of the pixel.
+ * We want to start from the top/left edge which is phase
+ * -0.5. That matches how the hardware calculates the scaling
+ * factors (from top-left of the first pixel to bottom-right
+ * of the last pixel, as opposed to the pixel centers).
+ *
+ * For 4:2:0 subsampled chroma planes we obviously have to
+ * adjust that so that the chroma sample position lands in
+ * the right spot.
+ *
+ * Note that for packed YCbCr 4:2:2 formats there is no way to
+ * control chroma siting. The hardware simply replicates the
+ * chroma samples for both of the luma samples, and thus we don't
+ * actually get the expected MPEG2 chroma siting convention :(
+ * The same behaviour is observed on pre-SKL platforms as well.
+ *
+ * Theory behind the formula (note that we ignore sub-pixel
+ * source coordinates):
+ * s = source sample position
+ * d = destination sample position
+ *
+ * Downscaling 4:1:
+ * -0.5
+ * | 0.0
+ * | |     1.5 (initial phase)
+ * | |     |
+ * v v     v
+ * | s | s | s | s |
+ * |       d       |
+ *
+ * Upscaling 1:4:
+ * -0.5
+ * | -0.375 (initial phase)
+ * | |     0.0
+ * | |     |
+ * v v     v
+ * |       s       |
+ * | d | d | d | d |
+ */
+u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_cosited)
+{
+	int phase = -0x8000;
+	u16 trip = 0;
+
+	if (chroma_cosited)
+		phase += (sub - 1) * 0x8000 / sub;
+
+	phase += scale / (2 * sub);
+
+	/*
+	 * Hardware initial phase limited to [-0.5:1.5].
+	 * Since the max hardware scale factor is 3.0, we
+	 * should never actually excdeed 1.0 here.
+	 */
+	WARN_ON(phase < -0x8000 || phase > 0x18000);
+
+	if (phase < 0)
+		phase = 0x10000 + phase;
+	else
+		trip = PS_PHASE_TRIP;
+
+	return ((phase >> 2) & PS_PHASE_MASK) | trip;
+}
+
+#define SKL_MIN_SRC_W 8
+#define SKL_MAX_SRC_W 4096
+#define SKL_MIN_SRC_H 8
+#define SKL_MAX_SRC_H 4096
+#define SKL_MIN_DST_W 8
+#define SKL_MAX_DST_W 4096
+#define SKL_MIN_DST_H 8
+#define SKL_MAX_DST_H 4096
+#define ICL_MAX_SRC_W 5120
+#define ICL_MAX_SRC_H 4096
+#define ICL_MAX_DST_W 5120
+#define ICL_MAX_DST_H 4096
+#define SKL_MIN_YUV_420_SRC_W 16
+#define SKL_MIN_YUV_420_SRC_H 16
+
+static int
+skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
+		  unsigned int scaler_user, int *scaler_id,
+		  int src_w, int src_h, int dst_w, int dst_h,
+		  const struct drm_format_info *format,
+		  u64 modifier, bool need_scaler)
+{
+	struct intel_crtc_scaler_state *scaler_state =
+		&crtc_state->scaler_state;
+	struct intel_crtc *intel_crtc =
+		to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
+	const struct drm_display_mode *adjusted_mode =
+		&crtc_state->hw.adjusted_mode;
+
+	/*
+	 * Src coordinates are already rotated by 270 degrees for
+	 * the 90/270 degree plane rotation cases (to match the
+	 * GTT mapping), hence no need to account for rotation here.
+	 */
+	if (src_w != dst_w || src_h != dst_h)
+		need_scaler = true;
+
+	/*
+	 * Scaling/fitting not supported in IF-ID mode in GEN9+
+	 * TODO: Interlace fetch mode doesn't support YUV420 planar formats.
+	 * Once NV12 is enabled, handle it here while allocating scaler
+	 * for NV12.
+	 */
+	if (INTEL_GEN(dev_priv) >= 9 && crtc_state->hw.enable &&
+	    need_scaler && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "Pipe/Plane scaling not supported with IF-ID mode\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * if plane is being disabled or scaler is no more required or force detach
+	 *  - free scaler binded to this plane/crtc
+	 *  - in order to do this, update crtc->scaler_usage
+	 *
+	 * Here scaler state in crtc_state is set free so that
+	 * scaler can be assigned to other user. Actual register
+	 * update to free the scaler is done in plane/panel-fit programming.
+	 * For this purpose crtc/plane_state->scaler_id isn't reset here.
+	 */
+	if (force_detach || !need_scaler) {
+		if (*scaler_id >= 0) {
+			scaler_state->scaler_users &= ~(1 << scaler_user);
+			scaler_state->scalers[*scaler_id].in_use = 0;
+
+			drm_dbg_kms(&dev_priv->drm,
+				    "scaler_user index %u.%u: "
+				    "Staged freeing scaler id %d scaler_users = 0x%x\n",
+				    intel_crtc->pipe, scaler_user, *scaler_id,
+				    scaler_state->scaler_users);
+			*scaler_id = -1;
+		}
+		return 0;
+	}
+
+	if (format && intel_format_info_is_yuv_semiplanar(format, modifier) &&
+	    (src_h < SKL_MIN_YUV_420_SRC_H || src_w < SKL_MIN_YUV_420_SRC_W)) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "Planar YUV: src dimensions not met\n");
+		return -EINVAL;
+	}
+
+	/* range checks */
+	if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
+	    dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
+	    (INTEL_GEN(dev_priv) >= 11 &&
+	     (src_w > ICL_MAX_SRC_W || src_h > ICL_MAX_SRC_H ||
+	      dst_w > ICL_MAX_DST_W || dst_h > ICL_MAX_DST_H)) ||
+	    (INTEL_GEN(dev_priv) < 11 &&
+	     (src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
+	      dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H)))	{
+		drm_dbg_kms(&dev_priv->drm,
+			    "scaler_user index %u.%u: src %ux%u dst %ux%u "
+			    "size is out of scaler range\n",
+			    intel_crtc->pipe, scaler_user, src_w, src_h,
+			    dst_w, dst_h);
+		return -EINVAL;
+	}
+
+	/* mark this plane as a scaler user in crtc_state */
+	scaler_state->scaler_users |= (1 << scaler_user);
+	drm_dbg_kms(&dev_priv->drm, "scaler_user index %u.%u: "
+		    "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
+		    intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
+		    scaler_state->scaler_users);
+
+	return 0;
+}
+
+int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state)
+{
+	const struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode;
+	int width, height;
+
+	if (crtc_state->pch_pfit.enabled) {
+		width = drm_rect_width(&crtc_state->pch_pfit.dst);
+		height = drm_rect_height(&crtc_state->pch_pfit.dst);
+	} else {
+		width = pipe_mode->crtc_hdisplay;
+		height = pipe_mode->crtc_vdisplay;
+	}
+	return skl_update_scaler(crtc_state, !crtc_state->hw.active,
+				 SKL_CRTC_INDEX,
+				 &crtc_state->scaler_state.scaler_id,
+				 crtc_state->pipe_src_w, crtc_state->pipe_src_h,
+				 width, height, NULL, 0,
+				 crtc_state->pch_pfit.enabled);
+}
+
+/**
+ * skl_update_scaler_plane - Stages update to scaler state for a given plane.
+ * @crtc_state: crtc's scaler state
+ * @plane_state: atomic plane state to update
+ *
+ * Return
+ *     0 - scaler_usage updated successfully
+ *    error - requested scaling cannot be supported or other error condition
+ */
+int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
+			    struct intel_plane_state *plane_state)
+{
+	struct intel_plane *intel_plane =
+		to_intel_plane(plane_state->uapi.plane);
+	struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev);
+	struct drm_framebuffer *fb = plane_state->hw.fb;
+	int ret;
+	bool force_detach = !fb || !plane_state->uapi.visible;
+	bool need_scaler = false;
+
+	/* Pre-gen11 and SDR planes always need a scaler for planar formats. */
+	if (!icl_is_hdr_plane(dev_priv, intel_plane->id) &&
+	    fb && intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier))
+		need_scaler = true;
+
+	ret = skl_update_scaler(crtc_state, force_detach,
+				drm_plane_index(&intel_plane->base),
+				&plane_state->scaler_id,
+				drm_rect_width(&plane_state->uapi.src) >> 16,
+				drm_rect_height(&plane_state->uapi.src) >> 16,
+				drm_rect_width(&plane_state->uapi.dst),
+				drm_rect_height(&plane_state->uapi.dst),
+				fb ? fb->format : NULL,
+				fb ? fb->modifier : 0,
+				need_scaler);
+
+	if (ret || plane_state->scaler_id < 0)
+		return ret;
+
+	/* check colorkey */
+	if (plane_state->ckey.flags) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "[PLANE:%d:%s] scaling with color key not allowed",
+			    intel_plane->base.base.id,
+			    intel_plane->base.name);
+		return -EINVAL;
+	}
+
+	/* Check src format */
+	switch (fb->format->format) {
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XRGB2101010:
+	case DRM_FORMAT_XBGR2101010:
+	case DRM_FORMAT_ARGB2101010:
+	case DRM_FORMAT_ABGR2101010:
+	case DRM_FORMAT_YUYV:
+	case DRM_FORMAT_YVYU:
+	case DRM_FORMAT_UYVY:
+	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_NV12:
+	case DRM_FORMAT_XYUV8888:
+	case DRM_FORMAT_P010:
+	case DRM_FORMAT_P012:
+	case DRM_FORMAT_P016:
+	case DRM_FORMAT_Y210:
+	case DRM_FORMAT_Y212:
+	case DRM_FORMAT_Y216:
+	case DRM_FORMAT_XVYU2101010:
+	case DRM_FORMAT_XVYU12_16161616:
+	case DRM_FORMAT_XVYU16161616:
+		break;
+	case DRM_FORMAT_XBGR16161616F:
+	case DRM_FORMAT_ABGR16161616F:
+	case DRM_FORMAT_XRGB16161616F:
+	case DRM_FORMAT_ARGB16161616F:
+		if (INTEL_GEN(dev_priv) >= 11)
+			break;
+		fallthrough;
+	default:
+		drm_dbg_kms(&dev_priv->drm,
+			    "[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
+			    intel_plane->base.base.id, intel_plane->base.name,
+			    fb->base.id, fb->format->format);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cnl_coef_tap(int i)
+{
+	return i % 7;
+}
+
+static u16 cnl_nearest_filter_coef(int t)
+{
+	return t == 3 ? 0x0800 : 0x3000;
+}
+
+/*
+ *  Theory behind setting nearest-neighbor integer scaling:
+ *
+ *  17 phase of 7 taps requires 119 coefficients in 60 dwords per set.
+ *  The letter represents the filter tap (D is the center tap) and the number
+ *  represents the coefficient set for a phase (0-16).
+ *
+ *         +------------+------------------------+------------------------+
+ *         |Index value | Data value coeffient 1 | Data value coeffient 2 |
+ *         +------------+------------------------+------------------------+
+ *         |   00h      |          B0            |          A0            |
+ *         +------------+------------------------+------------------------+
+ *         |   01h      |          D0            |          C0            |
+ *         +------------+------------------------+------------------------+
+ *         |   02h      |          F0            |          E0            |
+ *         +------------+------------------------+------------------------+
+ *         |   03h      |          A1            |          G0            |
+ *         +------------+------------------------+------------------------+
+ *         |   04h      |          C1            |          B1            |
+ *         +------------+------------------------+------------------------+
+ *         |   ...      |          ...           |          ...           |
+ *         +------------+------------------------+------------------------+
+ *         |   38h      |          B16           |          A16           |
+ *         +------------+------------------------+------------------------+
+ *         |   39h      |          D16           |          C16           |
+ *         +------------+------------------------+------------------------+
+ *         |   3Ah      |          F16           |          C16           |
+ *         +------------+------------------------+------------------------+
+ *         |   3Bh      |        Reserved        |          G16           |
+ *         +------------+------------------------+------------------------+
+ *
+ *  To enable nearest-neighbor scaling:  program scaler coefficents with
+ *  the center tap (Dxx) values set to 1 and all other values set to 0 as per
+ *  SCALER_COEFFICIENT_FORMAT
+ *
+ */
+
+static void cnl_program_nearest_filter_coefs(struct drm_i915_private *dev_priv,
+					     enum pipe pipe, int id, int set)
+{
+	int i;
+
+	intel_de_write_fw(dev_priv, CNL_PS_COEF_INDEX_SET(pipe, id, set),
+			  PS_COEE_INDEX_AUTO_INC);
+
+	for (i = 0; i < 17 * 7; i += 2) {
+		u32 tmp;
+		int t;
+
+		t = cnl_coef_tap(i);
+		tmp = cnl_nearest_filter_coef(t);
+
+		t = cnl_coef_tap(i + 1);
+		tmp |= cnl_nearest_filter_coef(t) << 16;
+
+		intel_de_write_fw(dev_priv, CNL_PS_COEF_DATA_SET(pipe, id, set),
+				  tmp);
+	}
+
+	intel_de_write_fw(dev_priv, CNL_PS_COEF_INDEX_SET(pipe, id, set), 0);
+}
+
+u32 skl_scaler_get_filter_select(enum drm_scaling_filter filter, int set)
+{
+	if (filter == DRM_SCALING_FILTER_NEAREST_NEIGHBOR) {
+		return (PS_FILTER_PROGRAMMED |
+			PS_Y_VERT_FILTER_SELECT(set) |
+			PS_Y_HORZ_FILTER_SELECT(set) |
+			PS_UV_VERT_FILTER_SELECT(set) |
+			PS_UV_HORZ_FILTER_SELECT(set));
+	}
+
+	return PS_FILTER_MEDIUM;
+}
+
+void skl_scaler_setup_filter(struct drm_i915_private *dev_priv, enum pipe pipe,
+			     int id, int set, enum drm_scaling_filter filter)
+{
+	switch (filter) {
+	case DRM_SCALING_FILTER_DEFAULT:
+		break;
+	case DRM_SCALING_FILTER_NEAREST_NEIGHBOR:
+		cnl_program_nearest_filter_coefs(dev_priv, pipe, id, set);
+		break;
+	default:
+		MISSING_CASE(filter);
+	}
+}
+
+void
+skl_program_scaler(struct intel_plane *plane,
+		   const struct intel_crtc_state *crtc_state,
+		   const struct intel_plane_state *plane_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+	const struct drm_framebuffer *fb = plane_state->hw.fb;
+	enum pipe pipe = plane->pipe;
+	int scaler_id = plane_state->scaler_id;
+	const struct intel_scaler *scaler =
+		&crtc_state->scaler_state.scalers[scaler_id];
+	int crtc_x = plane_state->uapi.dst.x1;
+	int crtc_y = plane_state->uapi.dst.y1;
+	u32 crtc_w = drm_rect_width(&plane_state->uapi.dst);
+	u32 crtc_h = drm_rect_height(&plane_state->uapi.dst);
+	u16 y_hphase, uv_rgb_hphase;
+	u16 y_vphase, uv_rgb_vphase;
+	int hscale, vscale;
+	u32 ps_ctrl;
+
+	hscale = drm_rect_calc_hscale(&plane_state->uapi.src,
+				      &plane_state->uapi.dst,
+				      0, INT_MAX);
+	vscale = drm_rect_calc_vscale(&plane_state->uapi.src,
+				      &plane_state->uapi.dst,
+				      0, INT_MAX);
+
+	/* TODO: handle sub-pixel coordinates */
+	if (intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier) &&
+	    !icl_is_hdr_plane(dev_priv, plane->id)) {
+		y_hphase = skl_scaler_calc_phase(1, hscale, false);
+		y_vphase = skl_scaler_calc_phase(1, vscale, false);
+
+		/* MPEG2 chroma siting convention */
+		uv_rgb_hphase = skl_scaler_calc_phase(2, hscale, true);
+		uv_rgb_vphase = skl_scaler_calc_phase(2, vscale, false);
+	} else {
+		/* not used */
+		y_hphase = 0;
+		y_vphase = 0;
+
+		uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false);
+		uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false);
+	}
+
+	ps_ctrl = skl_scaler_get_filter_select(plane_state->hw.scaling_filter, 0);
+	ps_ctrl |= PS_SCALER_EN | PS_PLANE_SEL(plane->id) | scaler->mode;
+
+	skl_scaler_setup_filter(dev_priv, pipe, scaler_id, 0,
+				plane_state->hw.scaling_filter);
+
+	intel_de_write_fw(dev_priv, SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
+	intel_de_write_fw(dev_priv, SKL_PS_VPHASE(pipe, scaler_id),
+			  PS_Y_PHASE(y_vphase) | PS_UV_RGB_PHASE(uv_rgb_vphase));
+	intel_de_write_fw(dev_priv, SKL_PS_HPHASE(pipe, scaler_id),
+			  PS_Y_PHASE(y_hphase) | PS_UV_RGB_PHASE(uv_rgb_hphase));
+	intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(pipe, scaler_id),
+			  (crtc_x << 16) | crtc_y);
+	intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(pipe, scaler_id),
+			  (crtc_w << 16) | crtc_h);
+}
+
+static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
+{
+	struct drm_device *dev = intel_crtc->base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
+
+	intel_de_write_fw(dev_priv, SKL_PS_CTRL(intel_crtc->pipe, id), 0);
+	intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
+	intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
+
+	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
+}
+
+/*
+ * This function detaches (aka. unbinds) unused scalers in hardware
+ */
+void skl_detach_scalers(const struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	const struct intel_crtc_scaler_state *scaler_state =
+		&crtc_state->scaler_state;
+	int i;
+
+	/* loop through and disable scalers that aren't in use */
+	for (i = 0; i < intel_crtc->num_scalers; i++) {
+		if (!scaler_state->scalers[i].in_use)
+			skl_detach_scaler(intel_crtc, i);
+	}
+}
+
+void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
+	int i;
+
+	for (i = 0; i < crtc->num_scalers; i++)
+		skl_detach_scaler(crtc, i);
+}
diff --git a/drivers/gpu/drm/i915/display/skl_scaler.h b/drivers/gpu/drm/i915/display/skl_scaler.h
new file mode 100644
index 000000000000..16bf829357c0
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/skl_scaler.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2020 Intel Corporation
+ */
+#ifndef INTEL_SCALER_H
+#define INTEL_SCALER_H
+
+#include <linux/types.h>
+
+enum drm_scaling_filter;
+struct drm_i915_private;
+struct intel_crtc_state;
+struct intel_plane_state;
+struct intel_plane;
+enum pipe;
+
+int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
+
+int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
+			    struct intel_plane_state *plane_state);
+
+u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_center);
+u32 skl_scaler_get_filter_select(enum drm_scaling_filter filter, int set);
+void skl_scaler_setup_filter(struct drm_i915_private *dev_priv, enum pipe pipe,
+			     int id, int set, enum drm_scaling_filter filter);
+
+void skl_program_scaler(struct intel_plane *plane,
+			const struct intel_crtc_state *crtc_state,
+			const struct intel_plane_state *plane_state);
+void skl_detach_scalers(const struct intel_crtc_state *crtc_state);
+void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state);
+#endif
diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
index 028e2897b39f..0cb93deb9cc3 100644
--- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
+++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
@@ -14,6 +14,7 @@
 #include "intel_pm.h"
 #include "intel_psr.h"
 #include "intel_sprite.h"
+#include "skl_scaler.h"
 #include "skl_universal_plane.h"
 
 static const u32 skl_plane_formats[] = {
diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.h b/drivers/gpu/drm/i915/display/skl_universal_plane.h
index 70eb5010cd28..818266653630 100644
--- a/drivers/gpu/drm/i915/display/skl_universal_plane.h
+++ b/drivers/gpu/drm/i915/display/skl_universal_plane.h
@@ -30,4 +30,8 @@ int skl_ccs_to_main_plane(const struct drm_framebuffer *fb, int ccs_plane);
 int skl_calc_main_surface_offset(const struct intel_plane_state *plane_state,
 				 int *x, int *y, u32 *offset);
 
+bool icl_is_nv12_y_plane(struct drm_i915_private *dev_priv,
+			 enum plane_id plane_id);
+bool icl_is_hdr_plane(struct drm_i915_private *dev_priv, enum plane_id plane_id);
+
 #endif
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index f94025ec603a..1059a26c1f58 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -38,6 +38,7 @@
 #include "intel_fifo_underrun.h"
 #include "intel_panel.h"
 #include "intel_sideband.h"
+#include "skl_scaler.h"
 
 /* return pixels in terms of txbyteclkhs */
 static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
-- 
2.27.0



More information about the Intel-gfx mailing list