[Intel-gfx] [PATCH 1/5] drm/i915: document caching related bits
Matthew Auld
matthew.auld at intel.com
Tue Jul 13 10:45:50 UTC 2021
Try to document the object caching related bits, like cache_coherent and
cache_dirty.
Suggested-by: Daniel Vetter <daniel.vetter at ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld at intel.com>
---
.../gpu/drm/i915/gem/i915_gem_object_types.h | 135 +++++++++++++++++-
drivers/gpu/drm/i915/i915_drv.h | 9 --
2 files changed, 131 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_object_types.h b/drivers/gpu/drm/i915/gem/i915_gem_object_types.h
index ef3de2ae9723..02c3529b774c 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_object_types.h
+++ b/drivers/gpu/drm/i915/gem/i915_gem_object_types.h
@@ -92,6 +92,57 @@ struct drm_i915_gem_object_ops {
const char *name; /* friendly name for debug, e.g. lockdep classes */
};
+/**
+ * enum i915_cache_level - The supported GTT caching values for system memory
+ * pages.
+ *
+ * These translate to some special GTT PTE bits when binding pages into some
+ * address space. It also determines whether an object, or rather its pages are
+ * coherent with the GPU, when also reading or writing through the CPU cache
+ * with those pages.
+ *
+ * Userspace can also control this through struct drm_i915_gem_caching.
+ */
+enum i915_cache_level {
+ /**
+ * @I915_CACHE_NONE:
+ *
+ * Not coherent with the CPU cache. If the cache is dirty and we need
+ * the underlying pages to be coherent with some later GPU access then
+ * we need to manually flush the pages.
+ *
+ * Note that on shared-LLC platforms reads through the CPU cache are
+ * still coherent even with this setting. See also
+ * I915_BO_CACHE_COHERENT_FOR_READ for more details.
+ */
+ I915_CACHE_NONE = 0,
+ /**
+ * @I915_CACHE_LLC:
+ *
+ * Coherent with the CPU cache. If the cache is dirty, then the GPU will
+ * ensure that access remains coherent, when both reading and writing
+ * through the CPU cache.
+ *
+ * Applies to both platforms with shared-LLC(HAS_LLC), and snooping
+ * based platforms(HAS_SNOOP).
+ */
+ I915_CACHE_LLC,
+ /**
+ * @I915_CACHE_L3_LLC:
+ *
+ * gen7+, L3 sits between the domain specifc caches, eg sampler/render
+ * caches, and the large Last-Level-Cache. LLC is coherent with the CPU,
+ * but L3 is only visible to the GPU.
+ */
+ I915_CACHE_L3_LLC,
+ /**
+ * @I915_CACHE_WT:
+ *
+ * hsw:gt3e Write-through for scanout buffers.
+ */
+ I915_CACHE_WT,
+};
+
enum i915_map_type {
I915_MAP_WB = 0,
I915_MAP_WC,
@@ -228,14 +279,90 @@ struct drm_i915_gem_object {
unsigned int mem_flags;
#define I915_BO_FLAG_STRUCT_PAGE BIT(0) /* Object backed by struct pages */
#define I915_BO_FLAG_IOMEM BIT(1) /* Object backed by IO memory */
- /*
- * Is the object to be mapped as read-only to the GPU
- * Only honoured if hardware has relevant pte bit
+ /**
+ * @cache_level: The desired GTT caching level.
+ *
+ * See enum i915_cache_level for possible values, along with what
+ * each does.
*/
unsigned int cache_level:3;
- unsigned int cache_coherent:2;
+ /**
+ * @cache_coherent:
+ *
+ * Track whether the pages are coherent with the GPU if reading or
+ * writing through the CPU cache.
+ *
+ * This largely depends on the @cache_level, for example if the object
+ * is marked as I915_CACHE_LLC, then GPU access is coherent for both
+ * reads and writes through the CPU cache.
+ *
+ * Note that on platforms with shared-LLC support(HAS_LLC) reads through
+ * the CPU cache are always coherent, regardless of the @cache_level. On
+ * snooping based platforms this is not the case, unless the full
+ * I915_CACHE_LLC or similar setting is used.
+ *
+ * As a result of this we need to track coherency separately for reads
+ * and writes, in order to avoid superfluous flushing on shared-LLC
+ * platforms, for reads.
+ *
+ * I915_BO_CACHE_COHERENT_FOR_READ:
+ *
+ * When reading through the CPU cache, the GPU is still coherent. Note
+ * that no data has actually been modified here, so it might seem
+ * strange that we care about this.
+ *
+ * As an example, if some object is mapped on the CPU with write-back
+ * caching, and we read some page, then the cache likely now contains
+ * the data from that read. At this point the cache and main memory
+ * match up, so all good. But next the GPU needs to write some data to
+ * that same page. Now if the @cache_level is I915_CACHE_NONE and the
+ * the platform doesn't have the shared-LLC, then the GPU will
+ * effectively skip invalidating the cache(or however that works
+ * internally) when writing the new value. This is really bad since the
+ * GPU has just written some new data to main memory, but the CPU cache
+ * is still valid and now contains stale data. As a result the next time
+ * we do a cached read with the CPU, we are rewarded with stale data.
+ * Likewise if the cache is later flushed, we might be rewarded with
+ * overwriting main memory with stale data.
+ *
+ * I915_BO_CACHE_COHERENT_FOR_WRITE:
+ *
+ * When writing through the CPU cache, the GPU is still coherent. Note
+ * that this also implies I915_BO_CACHE_COHERENT_FOR_READ.
+ *
+ * This is never set when I915_CACHE_NONE is used for @cache_level,
+ * where instead we have to manually flush the caches after writing
+ * through the CPU cache. For other cache levels this should be set and
+ * the object is therefore considered coherent for both reads and writes
+ * through the CPU cache.
+ */
#define I915_BO_CACHE_COHERENT_FOR_READ BIT(0)
#define I915_BO_CACHE_COHERENT_FOR_WRITE BIT(1)
+ unsigned int cache_coherent:2;
+ /**
+ * @cache_dirty:
+ *
+ * Track if the cache might be dirty for the @pages i.e it has yet to be
+ * written back to main memory. As a result reading directly from main
+ * memory might yield stale data.
+ *
+ * This also ties into whether the kernel is tracking the object as
+ * coherent with the GPU, as per @cache_coherent, as it determines if
+ * flushing might be needed at various points.
+ *
+ * Another part of @cache_dirty is managing flushing when first
+ * acquiring the pages for system memory, at this point the pages are
+ * considered foreign, so the default assumption is that the cache is
+ * dirty, for example the page zeroing done my the kernel might leave
+ * writes though the CPU cache, or swapping-in, while the actual data in
+ * main memory is potentially stale. Note that this is a potential
+ * security issue when dealing with userspace objects and zeroing. Now,
+ * whether we actually need apply the big sledgehammer of flushing all
+ * the pages on acquire depends on if @cache_coherent is marked as
+ * I915_BO_CACHE_COHERENT_FOR_WRITE, i.e that the GPU will be coherent
+ * for both reads and writes though the CPU cache. So pretty much this
+ * should only be needed for I915_CACHE_NONE objects.
+ */
unsigned int cache_dirty:1;
/**
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index c4747f4407ef..37bb1a3cadd4 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -394,15 +394,6 @@ struct drm_i915_display_funcs {
void (*read_luts)(struct intel_crtc_state *crtc_state);
};
-enum i915_cache_level {
- I915_CACHE_NONE = 0,
- I915_CACHE_LLC, /* also used for snoopable memory on non-LLC */
- I915_CACHE_L3_LLC, /* gen7+, L3 sits between the domain specifc
- caches, eg sampler/render caches, and the
- large Last-Level-Cache. LLC is coherent with
- the CPU, but L3 is only visible to the GPU. */
- I915_CACHE_WT, /* hsw:gt3e WriteThrough for scanouts */
-};
#define I915_COLOR_UNEVICTABLE (-1) /* a non-vma sharing the address space */
--
2.26.3
More information about the Intel-gfx
mailing list