[Intel-gfx] [PATCH v2 42/50] drm/i915/dg2: Add MPLLB programming for HDMI
Matt Atwood
matthew.s.atwood at intel.com
Fri Jul 16 21:13:21 UTC 2021
On Tue, Jul 13, 2021 at 08:15:32PM -0700, Matt Roper wrote:
> At the moment we don't have a proper algorithm that can be used to
> calculate PHY settings for arbitrary HDMI link rates. The PHY tables
> here should support the regular modes of real-world HDMI monitors.
>
> Bspec: 54032
> Cc: Matt Atwood <matthew.s.atwood at intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 14 +-
> drivers/gpu/drm/i915/display/intel_display.c | 47 +++
> drivers/gpu/drm/i915/display/intel_hdmi.c | 11 +
> drivers/gpu/drm/i915/display/intel_snps_phy.c | 286 +++++++++++++++++-
> drivers/gpu/drm/i915/display/intel_snps_phy.h | 7 +
> drivers/gpu/drm/i915/i915_reg.h | 3 +
> 6 files changed, 355 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 26a3aa73fcc4..929a95ddb316 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -51,6 +51,7 @@
> #include "intel_panel.h"
> #include "intel_pps.h"
> #include "intel_psr.h"
> +#include "intel_snps_phy.h"
> #include "intel_sprite.h"
> #include "intel_tc.h"
> #include "intel_vdsc.h"
> @@ -3745,6 +3746,15 @@ void intel_ddi_get_clock(struct intel_encoder *encoder,
> &crtc_state->dpll_hw_state);
> }
>
> +static void dg2_ddi_get_config(struct intel_encoder *encoder,
> + struct intel_crtc_state *crtc_state)
> +{
> + intel_mpllb_readout_hw_state(encoder, &crtc_state->mpllb_state);
> + crtc_state->port_clock = intel_mpllb_calc_port_clock(encoder, &crtc_state->mpllb_state);
> +
> + intel_ddi_get_config(encoder, crtc_state);
> +}
> +
> static void adls_ddi_get_config(struct intel_encoder *encoder,
> struct intel_crtc_state *crtc_state)
> {
> @@ -4606,7 +4616,9 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
> encoder->cloneable = 0;
> encoder->pipe_mask = ~0;
>
> - if (IS_ALDERLAKE_S(dev_priv)) {
> + if (IS_DG2(dev_priv)) {
> + encoder->get_config = dg2_ddi_get_config;
> + } else if (IS_ALDERLAKE_S(dev_priv)) {
> encoder->enable_clock = adls_ddi_enable_clock;
> encoder->disable_clock = adls_ddi_disable_clock;
> encoder->is_clock_enabled = adls_ddi_is_clock_enabled;
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 2357b79d6577..6f532b695b29 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -9113,6 +9113,52 @@ verify_shared_dpll_state(struct intel_crtc *crtc,
> }
> }
>
> +static void
> +verify_mpllb_state(struct intel_atomic_state *state,
> + struct intel_crtc_state *new_crtc_state)
> +{
> + struct drm_i915_private *i915 = to_i915(state->base.dev);
> + struct intel_mpllb_state mpllb_hw_state = { 0 };
> + struct intel_mpllb_state *mpllb_sw_state = &new_crtc_state->mpllb_state;
> + struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
> + struct intel_encoder *encoder;
> +
> + if (!IS_DG2(i915))
> + return;
> +
> + if (!new_crtc_state->hw.active)
> + return;
> +
> + encoder = intel_get_crtc_new_encoder(state, new_crtc_state);
> + intel_mpllb_readout_hw_state(encoder, &mpllb_hw_state);
> +
> +#define MPLLB_CHECK(name) do { \
> + if (mpllb_sw_state->name != mpllb_hw_state.name) { \
> + pipe_config_mismatch(false, crtc, "MPLLB:" __stringify(name), \
> + "(expected 0x%08x, found 0x%08x)", \
> + mpllb_sw_state->name, \
> + mpllb_hw_state.name); \
> + } \
> +} while (0)
> +
> + MPLLB_CHECK(mpllb_cp);
> + MPLLB_CHECK(mpllb_div);
> + MPLLB_CHECK(mpllb_div2);
> + MPLLB_CHECK(mpllb_fracn1);
> + MPLLB_CHECK(mpllb_fracn2);
> + MPLLB_CHECK(mpllb_sscen);
> + MPLLB_CHECK(mpllb_sscstep);
> +
> + /*
> + * ref_control is handled by the hardware/firemware and never
> + * programmed by the software, but the proper values are supplied
> + * in the bspec for verification purposes.
> + */
> + MPLLB_CHECK(ref_control);
> +
> +#undef MPLLB_CHECK
> +}
> +
> static void
> intel_modeset_verify_crtc(struct intel_crtc *crtc,
> struct intel_atomic_state *state,
> @@ -9126,6 +9172,7 @@ intel_modeset_verify_crtc(struct intel_crtc *crtc,
> verify_connector_state(state, crtc);
> verify_crtc_state(crtc, old_crtc_state, new_crtc_state);
> verify_shared_dpll_state(crtc, old_crtc_state, new_crtc_state);
> + verify_mpllb_state(state, new_crtc_state);
> }
>
> static void
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index 852af2b23540..b04685bb6439 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -51,6 +51,7 @@
> #include "intel_hdmi.h"
> #include "intel_lspcon.h"
> #include "intel_panel.h"
> +#include "intel_snps_phy.h"
>
> static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi)
> {
> @@ -1850,6 +1851,16 @@ hdmi_port_clock_valid(struct intel_hdmi *hdmi,
> if (IS_CHERRYVIEW(dev_priv) && clock > 216000 && clock < 240000)
> return MODE_CLOCK_RANGE;
>
> + /*
> + * SNPS PHYs' MPLLB table-based programming can only handle a fixed
> + * set of link rates.
> + *
> + * FIXME: We will hopefully get an algorithmic way of programming
> + * the MPLLB for HDMI in the future.
> + */
> + if (IS_DG2(dev_priv))
> + return intel_snps_phy_check_hdmi_link_rate(clock);
> +
> return MODE_OK;
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_snps_phy.c b/drivers/gpu/drm/i915/display/intel_snps_phy.c
> index 6d9205906595..1317b4e94b50 100644
> --- a/drivers/gpu/drm/i915/display/intel_snps_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_snps_phy.c
> @@ -3,6 +3,8 @@
> * Copyright © 2019 Intel Corporation
> */
>
> +#include <linux/util_macros.h>
> +
> #include "intel_de.h"
> #include "intel_display_types.h"
> #include "intel_snps_phy.h"
> @@ -375,14 +377,172 @@ static const struct intel_mpllb_state *dg2_edp_tables[] = {
> NULL,
> };
>
> -int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
> - struct intel_encoder *encoder)
> -{
> - const struct intel_mpllb_state **tables;
> - int i;
> +/*
> + * HDMI link rates with 100 MHz reference clock.
> + */
> +
> +static const struct intel_mpllb_state dg2_hdmi_25_175 = {
> + .clock = 25175,
> + .ref_control =
> + REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
> + .mpllb_cp =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 5) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 15) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
> + .mpllb_div =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 5) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2),
> + .mpllb_div2 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 128) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
> + .mpllb_fracn1 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 143),
> + .mpllb_fracn2 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 36663) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 71),
> + .mpllb_sscen =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
> +};
> +
> +static const struct intel_mpllb_state dg2_hdmi_27_0 = {
> + .clock = 27000,
> + .ref_control =
> + REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
> + .mpllb_cp =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 5) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 15) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
> + .mpllb_div =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 5) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2),
> + .mpllb_div2 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 140) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
> + .mpllb_fracn1 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 5),
> + .mpllb_fracn2 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 26214) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 2),
> + .mpllb_sscen =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
> +};
> +
> +static const struct intel_mpllb_state dg2_hdmi_74_25 = {
> + .clock = 74250,
> + .ref_control =
> + REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
> + .mpllb_cp =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 4) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 15) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
> + .mpllb_div =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 3) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FREQ_VCO, 3),
> + .mpllb_div2 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 86) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
> + .mpllb_fracn1 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 5),
> + .mpllb_fracn2 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 26214) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 2),
> + .mpllb_sscen =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
> +};
> +
> +static const struct intel_mpllb_state dg2_hdmi_148_5 = {
> + .clock = 148500,
> + .ref_control =
> + REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
> + .mpllb_cp =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 4) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 15) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
> + .mpllb_div =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 2) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FREQ_VCO, 3),
> + .mpllb_div2 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 86) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
> + .mpllb_fracn1 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 5),
> + .mpllb_fracn2 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 26214) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 2),
> + .mpllb_sscen =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
> +};
> +
> +static const struct intel_mpllb_state dg2_hdmi_594 = {
> + .clock = 594000,
> + .ref_control =
> + REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3),
> + .mpllb_cp =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 4) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 15) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124),
> + .mpllb_div =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FREQ_VCO, 3),
> + .mpllb_div2 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 86) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1),
> + .mpllb_fracn1 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 5),
> + .mpllb_fracn2 =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 26214) |
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 2),
> + .mpllb_sscen =
> + REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1),
> +};
>
> +static const struct intel_mpllb_state *dg2_hdmi_tables[] = {
> + &dg2_hdmi_25_175,
> + &dg2_hdmi_27_0,
> + &dg2_hdmi_74_25,
> + &dg2_hdmi_148_5,
> + &dg2_hdmi_594,
> + NULL,
> +};
> +
> +static const struct intel_mpllb_state **
> +intel_mpllb_tables_get(struct intel_crtc_state *crtc_state,
> + struct intel_encoder *encoder)
> +{
> if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) {
> - tables = dg2_edp_tables;
> + return dg2_edp_tables;
> } else if (intel_crtc_has_dp_encoder(crtc_state)) {
> /*
> * FIXME: Initially we're just enabling the "combo" outputs on
> @@ -397,15 +557,41 @@ int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
> * that to determine which table to use.
> */
> if (0)
> - tables = dg2_dp_38_4_tables;
> + return dg2_dp_38_4_tables;
> else
> - tables = dg2_dp_100_tables;
> - } else {
> - /* TODO: Add HDMI support */
> - MISSING_CASE(encoder->type);
> - return -EINVAL;
> + return dg2_dp_100_tables;
> + } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
> + return dg2_hdmi_tables;
> }
>
> + MISSING_CASE(encoder->type);
> + return NULL;
> +}
> +
> +int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
> + struct intel_encoder *encoder)
> +{
> + const struct intel_mpllb_state **tables;
> + int i;
> +
> + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
> + if (intel_snps_phy_check_hdmi_link_rate(crtc_state->port_clock)
> + != MODE_OK) {
> + /*
> + * FIXME: Can only support fixed HDMI frequencies
> + * until we have a proper algorithm under a valid
> + * license.
> + */
> + DRM_DEBUG_KMS("Can't support HDMI link rate %d\n",
> + crtc_state->port_clock);
> + return -EINVAL;
> + }
> + }
> +
> + tables = intel_mpllb_tables_get(crtc_state, encoder);
> + if (!tables)
> + return -EINVAL;
> +
> for (i = 0; tables[i]; i++) {
> if (crtc_state->port_clock <= tables[i]->clock) {
> crtc_state->mpllb_state = *tables[i];
> @@ -515,3 +701,79 @@ void intel_mpllb_disable(struct intel_encoder *encoder)
> * We handle this step in bxt_set_cdclk().
> */
> }
> +
> +int intel_mpllb_calc_port_clock(struct intel_encoder *encoder,
> + const struct intel_mpllb_state *pll_state)
> +{
> + unsigned int frac_quot = 0, frac_rem = 0, frac_den = 1;
> + unsigned int multiplier, tx_clk_div, refclk;
> + bool frac_en;
> +
> + if (0)
> + refclk = 38400;
> + else
> + refclk = 100000;
> +
> + refclk >>= REG_FIELD_GET(SNPS_PHY_MPLLB_REF_CLK_DIV, pll_state->mpllb_div2) - 1;
> +
> + frac_en = REG_FIELD_GET(SNPS_PHY_MPLLB_FRACN_EN, pll_state->mpllb_fracn1);
> +
> + if (frac_en) {
> + frac_quot = REG_FIELD_GET(SNPS_PHY_MPLLB_FRACN_QUOT, pll_state->mpllb_fracn2);
> + frac_rem = REG_FIELD_GET(SNPS_PHY_MPLLB_FRACN_REM, pll_state->mpllb_fracn2);
> + frac_den = REG_FIELD_GET(SNPS_PHY_MPLLB_FRACN_DEN, pll_state->mpllb_fracn1);
> + }
> +
> + multiplier = REG_FIELD_GET(SNPS_PHY_MPLLB_MULTIPLIER, pll_state->mpllb_div2) / 2 + 16;
> +
> + tx_clk_div = REG_FIELD_GET(SNPS_PHY_MPLLB_TX_CLK_DIV, pll_state->mpllb_div);
> +
> + return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, (multiplier << 16) + frac_quot) +
> + DIV_ROUND_CLOSEST(refclk * frac_rem, frac_den),
> + 10 << (tx_clk_div + 16));
> +}
> +
> +void intel_mpllb_readout_hw_state(struct intel_encoder *encoder,
> + struct intel_mpllb_state *pll_state)
> +{
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
> +
> + pll_state->mpllb_cp = intel_de_read(dev_priv, SNPS_PHY_MPLLB_CP(phy));
> + pll_state->mpllb_div = intel_de_read(dev_priv, SNPS_PHY_MPLLB_DIV(phy));
> + pll_state->mpllb_div2 = intel_de_read(dev_priv, SNPS_PHY_MPLLB_DIV2(phy));
> + pll_state->mpllb_sscen = intel_de_read(dev_priv, SNPS_PHY_MPLLB_SSCEN(phy));
> + pll_state->mpllb_sscstep = intel_de_read(dev_priv, SNPS_PHY_MPLLB_SSCSTEP(phy));
> + pll_state->mpllb_fracn1 = intel_de_read(dev_priv, SNPS_PHY_MPLLB_FRACN1(phy));
> + pll_state->mpllb_fracn2 = intel_de_read(dev_priv, SNPS_PHY_MPLLB_FRACN2(phy));
> +
> + /*
> + * REF_CONTROL is under firmware control and never programmed by the
> + * driver; we read it only for sanity checking purposes. The bspec
> + * only tells us the expected value for one field in this register,
> + * so we'll only read out those specific bits here.
> + */
> + pll_state->ref_control = intel_de_read(dev_priv, SNPS_PHY_REF_CONTROL(phy)) &
> + SNPS_PHY_REF_CONTROL_REF_RANGE;
> +
> + /*
> + * MPLLB_DIV is programmed twice, once with the software-computed
> + * state, then again with the MPLLB_FORCE_EN bit added. Drop that
> + * extra bit during readout so that we return the actual expected
> + * software state.
> + */
> + pll_state->mpllb_div &= ~SNPS_PHY_MPLLB_FORCE_EN;
> +}
> +
> +int intel_snps_phy_check_hdmi_link_rate(int clock)
> +{
> + const struct intel_mpllb_state **tables = dg2_hdmi_tables;
> + int i;
> +
> + for (i = 0; tables[i]; i++) {
> + if (clock == tables[i]->clock)
> + return MODE_OK;
> + }
> +
> + return MODE_CLOCK_RANGE;
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_snps_phy.h b/drivers/gpu/drm/i915/display/intel_snps_phy.h
> index 205ab46f0b67..ca4c2a25182b 100644
> --- a/drivers/gpu/drm/i915/display/intel_snps_phy.h
> +++ b/drivers/gpu/drm/i915/display/intel_snps_phy.h
> @@ -8,11 +8,18 @@
>
> struct intel_encoder;
> struct intel_crtc_state;
> +struct intel_mpllb_state;
>
> int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
> struct intel_encoder *encoder);
> void intel_mpllb_enable(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state);
> void intel_mpllb_disable(struct intel_encoder *encoder);
> +void intel_mpllb_readout_hw_state(struct intel_encoder *encoder,
> + struct intel_mpllb_state *pll_state);
> +int intel_mpllb_calc_port_clock(struct intel_encoder *encoder,
> + const struct intel_mpllb_state *pll_state);
> +
> +int intel_snps_phy_check_hdmi_link_rate(int clock);
>
> #endif /* __INTEL_SNPS_PHY_H__ */
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 1422fbce36cb..92408b4e2730 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -2325,12 +2325,15 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
>
> #define SNPS_PHY_MPLLB_SSCEN(phy) _MMIO_SNPS(phy, 0x168014)
> #define SNPS_PHY_MPLLB_SSC_EN REG_BIT(31)
> +#define SNPS_PHY_MPLLB_SSC_UP_SPREAD REG_BIT(30)
> #define SNPS_PHY_MPLLB_SSC_PEAK REG_GENMASK(29, 10)
>
> #define SNPS_PHY_MPLLB_SSCSTEP(phy) _MMIO_SNPS(phy, 0x168018)
> #define SNPS_PHY_MPLLB_SSC_STEPSIZE REG_GENMASK(31, 11)
>
> #define SNPS_PHY_MPLLB_DIV2(phy) _MMIO_SNPS(phy, 0x16801C)
> +#define SNPS_PHY_MPLLB_HDMI_PIXEL_CLK_DIV REG_GENMASK(19, 18)
> +#define SNPS_PHY_MPLLB_HDMI_DIV REG_GENMASK(17, 15)
> #define SNPS_PHY_MPLLB_REF_CLK_DIV REG_GENMASK(14, 12)
> #define SNPS_PHY_MPLLB_MULTIPLIER REG_GENMASK(11, 0)
>
> --
> 2.25.4
>
More information about the Intel-gfx
mailing list