[Intel-gfx] [PATCH 04/30] drm/i915/display: remove explicit CNL handling from intel_cdclk.c
Lucas De Marchi
lucas.demarchi at intel.com
Tue Jul 27 06:12:07 UTC 2021
On Sat, Jul 24, 2021 at 11:12:07AM -0700, Matt Roper wrote:
>On Fri, Jul 23, 2021 at 05:10:48PM -0700, Lucas De Marchi wrote:
>> The only real platform with DISPLAY_VER == 10 is GLK, so we don't need
>> any checks and supporting code for CNL. Remove code and rename
>> functions/macros accordingly.
>>
>> Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
>> ---
>> drivers/gpu/drm/i915/display/intel_cdclk.c | 72 +++++-----------------
>> drivers/gpu/drm/i915/i915_reg.h | 4 +-
>> 2 files changed, 18 insertions(+), 58 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
>> index ff35c29508d5..34fa4130d5c4 100644
>> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
>> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
>> @@ -1195,17 +1195,6 @@ static const struct intel_cdclk_vals glk_cdclk_table[] = {
>> {}
>> };
>>
>> -static const struct intel_cdclk_vals cnl_cdclk_table[] = {
>> - { .refclk = 19200, .cdclk = 168000, .divider = 4, .ratio = 35 },
>> - { .refclk = 19200, .cdclk = 336000, .divider = 2, .ratio = 35 },
>> - { .refclk = 19200, .cdclk = 528000, .divider = 2, .ratio = 55 },
>> -
>> - { .refclk = 24000, .cdclk = 168000, .divider = 4, .ratio = 28 },
>> - { .refclk = 24000, .cdclk = 336000, .divider = 2, .ratio = 28 },
>> - { .refclk = 24000, .cdclk = 528000, .divider = 2, .ratio = 44 },
>> - {}
>> -};
>> -
>> static const struct intel_cdclk_vals icl_cdclk_table[] = {
>> { .refclk = 19200, .cdclk = 172800, .divider = 2, .ratio = 18 },
>> { .refclk = 19200, .cdclk = 192000, .divider = 2, .ratio = 20 },
>> @@ -1339,16 +1328,6 @@ static u8 bxt_calc_voltage_level(int cdclk)
>> return DIV_ROUND_UP(cdclk, 25000);
>> }
>>
>> -static u8 cnl_calc_voltage_level(int cdclk)
>> -{
>> - if (cdclk > 336000)
>> - return 2;
>> - else if (cdclk > 168000)
>> - return 1;
>> - else
>> - return 0;
>> -}
>> -
>> static u8 icl_calc_voltage_level(int cdclk)
>> {
>> if (cdclk > 556800)
>> @@ -1383,15 +1362,6 @@ static u8 tgl_calc_voltage_level(int cdclk)
>> return 0;
>> }
>>
>> -static void cnl_readout_refclk(struct drm_i915_private *dev_priv,
>> - struct intel_cdclk_config *cdclk_config)
>> -{
>> - if (intel_de_read(dev_priv, SKL_DSSM) & CNL_DSSM_CDCLK_PLL_REFCLK_24MHz)
>> - cdclk_config->ref = 24000;
>> - else
>> - cdclk_config->ref = 19200;
>> -}
>> -
>> static void icl_readout_refclk(struct drm_i915_private *dev_priv,
>> struct intel_cdclk_config *cdclk_config)
>> {
>> @@ -1422,8 +1392,6 @@ static void bxt_de_pll_readout(struct drm_i915_private *dev_priv,
>> cdclk_config->ref = 38400;
>> else if (DISPLAY_VER(dev_priv) >= 11)
>> icl_readout_refclk(dev_priv, cdclk_config);
>> - else if (IS_CANNONLAKE(dev_priv))
>> - cnl_readout_refclk(dev_priv, cdclk_config);
>> else
>> cdclk_config->ref = 19200;
>>
>> @@ -1439,11 +1407,11 @@ static void bxt_de_pll_readout(struct drm_i915_private *dev_priv,
>> }
>>
>> /*
>> - * CNL+ have the ratio directly in the PLL enable register, gen9lp had
>> - * it in a separate PLL control register.
>> + * DISPLAY_VER >= 11 have the ratio directly in the PLL enable register,
>> + * gen9lp had it in a separate PLL control register.
>> */
>> - if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv))
>> - ratio = val & CNL_CDCLK_PLL_RATIO_MASK;
>> + if (DISPLAY_VER(dev_priv) >= 11)
>> + ratio = val & ICL_CDCLK_PLL_RATIO_MASK;
>> else
>> ratio = intel_de_read(dev_priv, BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
>>
>> @@ -1530,7 +1498,7 @@ static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
>> dev_priv->cdclk.hw.vco = vco;
>> }
>>
>> -static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
>> +static void icl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
>> {
>> intel_de_rmw(dev_priv, BXT_DE_PLL_ENABLE,
>> BXT_DE_PLL_PLL_ENABLE, 0);
>> @@ -1542,12 +1510,12 @@ static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
>> dev_priv->cdclk.hw.vco = 0;
>> }
>>
>> -static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
>> +static void icl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
>> {
>> int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
>> u32 val;
>>
>> - val = CNL_CDCLK_PLL_RATIO(ratio);
>> + val = ICL_CDCLK_PLL_RATIO(ratio);
>> intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
>>
>> val |= BXT_DE_PLL_PLL_ENABLE;
>> @@ -1566,7 +1534,7 @@ static void adlp_cdclk_pll_crawl(struct drm_i915_private *dev_priv, int vco)
>> u32 val;
>>
>> /* Write PLL ratio without disabling */
>> - val = CNL_CDCLK_PLL_RATIO(ratio) | BXT_DE_PLL_PLL_ENABLE;
>> + val = ICL_CDCLK_PLL_RATIO(ratio) | BXT_DE_PLL_PLL_ENABLE;
>> intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
>>
>> /* Submit freq change request */
>> @@ -1635,7 +1603,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
>> int ret;
>>
>> /* Inform power controller of upcoming frequency change. */
>> - if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv))
>> + if (DISPLAY_VER(dev_priv) >= 11)
>> ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
>> SKL_CDCLK_PREPARE_FOR_CHANGE,
>> SKL_CDCLK_READY_FOR_CHANGE,
>> @@ -1659,13 +1627,13 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
>> if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->cdclk.hw.vco > 0 && vco > 0) {
>> if (dev_priv->cdclk.hw.vco != vco)
>> adlp_cdclk_pll_crawl(dev_priv, vco);
>> - } else if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) {
>> + } else if (DISPLAY_VER(dev_priv) >= 11) {
>> if (dev_priv->cdclk.hw.vco != 0 &&
>> dev_priv->cdclk.hw.vco != vco)
>> - cnl_cdclk_pll_disable(dev_priv);
>> + icl_cdclk_pll_disable(dev_priv);
>>
>> if (dev_priv->cdclk.hw.vco != vco)
>> - cnl_cdclk_pll_enable(dev_priv, vco);
>> + icl_cdclk_pll_enable(dev_priv, vco);
>> } else {
>> if (dev_priv->cdclk.hw.vco != 0 &&
>> dev_priv->cdclk.hw.vco != vco)
>> @@ -1691,7 +1659,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
>> if (pipe != INVALID_PIPE)
>> intel_wait_for_vblank(dev_priv, pipe);
>>
>> - if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) {
>> + if (DISPLAY_VER(dev_priv) >= 11) {
>> ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
>> cdclk_config->voltage_level);
>> } else {
>> @@ -1716,7 +1684,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
>>
>> intel_update_cdclk(dev_priv);
>>
>> - if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv))
>> + if (DISPLAY_VER(dev_priv) >= 11)
>> /*
>> * Can't read out the voltage level :(
>> * Let's just assume everything is as expected.
>> @@ -2125,7 +2093,7 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
>> crtc_state->port_clock >= 540000 &&
>> crtc_state->lane_count == 4) {
>> if (DISPLAY_VER(dev_priv) == 10) {
>> - /* Display WA #1145: glk,cnl */
>> + /* Display WA #1145: glk */
>> min_cdclk = max(316800, min_cdclk);
>> } else if (DISPLAY_VER(dev_priv) == 9 || IS_BROADWELL(dev_priv)) {
>> /* Display WA #1144: skl,bxt */
>> @@ -2246,7 +2214,7 @@ static int intel_compute_min_cdclk(struct intel_cdclk_state *cdclk_state)
>>
>> /*
>> * Account for port clock min voltage level requirements.
>> - * This only really does something on CNL+ but can be
>> + * This only really does something on DISPLA_VER >= 11 but can be
>> * called on earlier platforms as well.
>> *
>> * Note that this functions assumes that 0 is
>> @@ -2660,8 +2628,6 @@ void intel_update_max_cdclk(struct drm_i915_private *dev_priv)
>> dev_priv->max_cdclk_freq = 648000;
>> else
>> dev_priv->max_cdclk_freq = 652800;
>> - } else if (IS_CANNONLAKE(dev_priv)) {
>> - dev_priv->max_cdclk_freq = 528000;
>> } else if (IS_GEMINILAKE(dev_priv)) {
>> dev_priv->max_cdclk_freq = 316800;
>> } else if (IS_BROXTON(dev_priv)) {
>> @@ -2925,12 +2891,6 @@ void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
>> dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
>> dev_priv->display.calc_voltage_level = icl_calc_voltage_level;
>> dev_priv->cdclk.table = icl_cdclk_table;
>> - } else if (IS_CANNONLAKE(dev_priv)) {
>> - dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
>> - dev_priv->display.set_cdclk = bxt_set_cdclk;
>> - dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
>> - dev_priv->display.calc_voltage_level = cnl_calc_voltage_level;
>> - dev_priv->cdclk.table = cnl_cdclk_table;
>> } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
>> dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
>> dev_priv->display.set_cdclk = bxt_set_cdclk;
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> index 8e1392028184..6a894ffd91e1 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -11016,8 +11016,8 @@ enum skl_power_gate {
>> #define BXT_DE_PLL_LOCK (1 << 30)
>> #define BXT_DE_PLL_FREQ_REQ (1 << 23)
>> #define BXT_DE_PLL_FREQ_REQ_ACK (1 << 22)
>> -#define CNL_CDCLK_PLL_RATIO(x) (x)
>> -#define CNL_CDCLK_PLL_RATIO_MASK 0xff
>> +#define ICL_CDCLK_PLL_RATIO(x) (x)
>> +#define ICL_CDCLK_PLL_RATIO_MASK 0xff
>
>We could take this opportunity to switch to REG_GENMASK, REG_FIELD_PREP
>here. Otherwise,
>
>Reviewed-by: Matt Roper <matthew.d.roper at intel.com>
I'd rather have a single big patch converting all of i915_reg.h
We are doing this conversion piece by piece for a long time and it seems
we are never going to achieve the desired end result.
todo++
thanks
Lucas De Marchi
>
>>
>> /* GEN9 DC */
>> #define DC_STATE_EN _MMIO(0x45504)
>> --
>> 2.31.1
>>
>
>--
>Matt Roper
>Graphics Software Engineer
>VTT-OSGC Platform Enablement
>Intel Corporation
>(916) 356-2795
More information about the Intel-gfx
mailing list