[Intel-gfx] [PATCH 09/15] drm/i915/guc/slpc: Add get max/min freq hooks

[Michal Wajdeczko]

On 26.07.2021 21:07, Vinay Belgaumkar wrote:
> Add helpers to read the min/max frequency being used
> by SLPC. This is done by send a H2G command which forces
> SLPC to update the shared data struct which can then be
> read. These helpers will be used in a sysfs patch later
> on.
> 
> v2: Address review comments (Michal W)
> v3: Return err in case of query failure (Michal W)
> 
> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar at intel.com>
> Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan at intel.com>
> ---
>  drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c | 54 +++++++++++++++++++++
>  drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h |  2 +
>  2 files changed, 56 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c
> index 63656640189c..c653bba3b5eb 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c
> @@ -306,6 +306,33 @@ int intel_guc_slpc_set_max_freq(struct intel_guc_slpc *slpc, u32 val)
>  	return ret;
>  }
>  
> +/**
> + * intel_guc_slpc_get_max_freq() - Get max frequency limit for SLPC.
> + * @slpc: pointer to intel_guc_slpc.
> + * @val: pointer to val which will hold max frequency (MHz)
> + *
> + * This function will invoke GuC SLPC action to read the max frequency
> + * limit for unslice.
> + *
> + * Return: 0 on success, non-zero error code on failure.
> + */
> +int intel_guc_slpc_get_max_freq(struct intel_guc_slpc *slpc, u32 *val)
> +{
> +	struct drm_i915_private *i915 = slpc_to_i915(slpc);
> +	intel_wakeref_t wakeref;
> +	int ret = 0;
> +
> +	with_intel_runtime_pm(&i915->runtime_pm, wakeref) {
> +		/* Force GuC to update task data */
> +		ret = slpc_query_task_state(slpc);
> +
> +		if (!ret)
> +			*val = slpc_decode_max_freq(slpc);
> +	}
> +
> +	return ret;
> +}
> +
>  /**
>   * intel_guc_slpc_set_min_freq() - Set min frequency limit for SLPC.
>   * @slpc: pointer to intel_guc_slpc.
> @@ -338,6 +365,33 @@ int intel_guc_slpc_set_min_freq(struct intel_guc_slpc *slpc, u32 val)
>  	return ret;
>  }
>  
> +/**
> + * intel_guc_slpc_get_min_freq() - Get min frequency limit for SLPC.
> + * @slpc: pointer to intel_guc_slpc.
> + * @val: pointer to val which will hold min frequency (MHz)
> + *
> + * This function will invoke GuC SLPC action to read the min frequency
> + * limit for unslice.
> + *
> + * Return: 0 on success, non-zero error code on failure.
> + */
> +int intel_guc_slpc_get_min_freq(struct intel_guc_slpc *slpc, u32 *val)
> +{
> +	intel_wakeref_t wakeref;
> +	struct drm_i915_private *i915 = guc_to_gt(slpc_to_guc(slpc))->i915;

use slpc_to_i915() and in this order:

	struct drm_i915_private *i915 = slpc_to_i915(slpc);
	intel_wakeref_t wakeref;
	int ret = 0;

with that fixed,

Reviewed-by: Michal Wajdeczko <michal.wajdeczko at intel.com>

> +	int ret = 0;
> +
> +	with_intel_runtime_pm(&i915->runtime_pm, wakeref) {
> +		/* Force GuC to update task data */
> +		ret = slpc_query_task_state(slpc);
> +
> +		if (!ret)
> +			*val = slpc_decode_min_freq(slpc);
> +	}
> +
> +	return ret;
> +}
> +
>  /*
>   * intel_guc_slpc_enable() - Start SLPC
>   * @slpc: pointer to intel_guc_slpc.
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h
> index e594510497ec..92d7afd44f07 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h
> @@ -31,5 +31,7 @@ int intel_guc_slpc_enable(struct intel_guc_slpc *slpc);
>  void intel_guc_slpc_fini(struct intel_guc_slpc *slpc);
>  int intel_guc_slpc_set_max_freq(struct intel_guc_slpc *slpc, u32 val);
>  int intel_guc_slpc_set_min_freq(struct intel_guc_slpc *slpc, u32 val);
> +int intel_guc_slpc_get_max_freq(struct intel_guc_slpc *slpc, u32 *val);
> +int intel_guc_slpc_get_min_freq(struct intel_guc_slpc *slpc, u32 *val);
>  
>  #endif
>