[Intel-gfx] [PATCH 14/15] drm/i915/guc/slpc: Add SLPC selftest
Belgaumkar, Vinay
vinay.belgaumkar at intel.com
Tue Jul 27 22:25:20 UTC 2021
On 7/27/2021 12:16 PM, Matthew Brost wrote:
> On Mon, Jul 26, 2021 at 12:07:59PM -0700, Vinay Belgaumkar wrote:
>> Tests that exercise the SLPC get/set frequency interfaces.
>>
>> Clamp_max will set max frequency to multiple levels and check
>> that SLPC requests frequency lower than or equal to it.
>>
>> Clamp_min will set min frequency to different levels and check
>> if SLPC requests are higher or equal to those levels.
>>
>> v2: Address review comments (Michal W)
>> v3: Checkpatch() corrections
>>
>> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar at intel.com>
>> ---
>> drivers/gpu/drm/i915/gt/intel_rps.c | 1 +
>> drivers/gpu/drm/i915/gt/selftest_slpc.c | 311 ++++++++++++++++++
>> drivers/gpu/drm/i915/gt/selftest_slpc.h | 12 +
>> .../drm/i915/selftests/i915_live_selftests.h | 1 +
>> 4 files changed, 325 insertions(+)
>> create mode 100644 drivers/gpu/drm/i915/gt/selftest_slpc.c
>> create mode 100644 drivers/gpu/drm/i915/gt/selftest_slpc.h
>>
>> diff --git a/drivers/gpu/drm/i915/gt/intel_rps.c b/drivers/gpu/drm/i915/gt/intel_rps.c
>> index 48d4147165a9..6237332835fe 100644
>> --- a/drivers/gpu/drm/i915/gt/intel_rps.c
>> +++ b/drivers/gpu/drm/i915/gt/intel_rps.c
>> @@ -2318,4 +2318,5 @@ EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
>>
>> #if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
>> #include "selftest_rps.c"
>> +#include "selftest_slpc.c"
>> #endif
>> diff --git a/drivers/gpu/drm/i915/gt/selftest_slpc.c b/drivers/gpu/drm/i915/gt/selftest_slpc.c
>> new file mode 100644
>> index 000000000000..5018f686686f
>> --- /dev/null
>> +++ b/drivers/gpu/drm/i915/gt/selftest_slpc.c
>> @@ -0,0 +1,311 @@
>> +// SPDX-License-Identifier: MIT
>> +/*
>> + * Copyright © 2021 Intel Corporation
>> + */
>> +
>> +#include "selftest_slpc.h"
>> +
>> +#define NUM_STEPS 5
>> +#define H2G_DELAY 50000
>> +#define delay_for_h2g() usleep_range(H2G_DELAY, H2G_DELAY + 10000)
>> +
>> +static int set_min_freq(struct intel_guc_slpc *slpc, u32 freq)
>> +{
>> + int ret;
>> +
>> + ret = intel_guc_slpc_set_min_freq(slpc, freq);
>> + if (ret)
>> + pr_err("Could not set min frequency to [%u]\n", freq);
>> + else /* Delay to ensure h2g completes */
>> + delay_for_h2g();
>> +
>> + return ret;
>> +}
>> +
>> +static int set_max_freq(struct intel_guc_slpc *slpc, u32 freq)
>> +{
>> + int ret;
>> +
>> + ret = intel_guc_slpc_set_max_freq(slpc, freq);
>> + if (ret)
>> + pr_err("Could not set maximum frequency [%u]\n",
>> + freq);
>> + else /* Delay to ensure h2g completes */
>> + delay_for_h2g();
>> +
>> + return ret;
>> +}
>> +
>> +int live_slpc_clamp_min(void *arg)
>> +{
>> + struct drm_i915_private *i915 = arg;
>> + struct intel_gt *gt = &i915->gt;
>> + struct intel_guc_slpc *slpc = >->uc.guc.slpc;
>> + struct intel_rps *rps = >->rps;
>> + struct intel_engine_cs *engine;
>> + enum intel_engine_id id;
>> + struct igt_spinner spin;
>> + u32 slpc_min_freq, slpc_max_freq;
>> + int err = 0;
>> +
>> + if (!intel_uc_uses_guc_slpc(>->uc))
>> + return 0;
>> +
>> + if (igt_spinner_init(&spin, gt))
>> + return -ENOMEM;
>> +
>> + if (intel_guc_slpc_get_max_freq(slpc, &slpc_max_freq)) {
>> + pr_err("Could not get SLPC max freq\n");
>> + return -EIO;
>> + }
>> +
>> + if (intel_guc_slpc_get_min_freq(slpc, &slpc_min_freq)) {
>> + pr_err("Could not get SLPC min freq\n");
>> + return -EIO;
>> + }
>> +
>> + if (slpc_min_freq == slpc_max_freq) {
>> + pr_err("Min/Max are fused to the same value\n");
>> + return -EINVAL;
>> + }
>> +
>> + intel_gt_pm_wait_for_idle(gt);
>> + intel_gt_pm_get(gt);
>> + for_each_engine(engine, gt, id) {
>> + struct i915_request *rq;
>> + u32 step, min_freq, req_freq;
>> + u32 act_freq, max_act_freq;
>> +
>> + if (!intel_engine_can_store_dword(engine))
>> + continue;
>> +
>> + /* Go from min to max in 5 steps */
>> + step = (slpc_max_freq - slpc_min_freq) / NUM_STEPS;
>> + max_act_freq = slpc_min_freq;
>> + for (min_freq = slpc_min_freq; min_freq < slpc_max_freq;
>> + min_freq += step) {
>> + err = set_min_freq(slpc, min_freq);
>> + if (err)
>> + break;
>> +
>> + st_engine_heartbeat_disable(engine);
>> +
>> + rq = igt_spinner_create_request(&spin,
>> + engine->kernel_context,
>> + MI_NOOP);
>> + if (IS_ERR(rq)) {
>> + err = PTR_ERR(rq);
>> + st_engine_heartbeat_enable(engine);
>> + break;
>> + }
>> +
>> + i915_request_add(rq);
>> +
>> + if (!igt_wait_for_spinner(&spin, rq)) {
>> + pr_err("%s: Spinner did not start\n",
>> + engine->name);
>> + igt_spinner_end(&spin);
>> + st_engine_heartbeat_enable(engine);
>> + intel_gt_set_wedged(engine->gt);
>> + err = -EIO;
>> + break;
>> + }
>> +
>> + /* Wait for GuC to detect business and raise
>> + * requested frequency if necessary.
>> + */
>> + delay_for_h2g();
>> +
>> + req_freq = intel_rps_read_punit_req_frequency(rps);
>> +
>> + /* GuC requests freq in multiples of 50/3 MHz */
>> + if (req_freq < (min_freq - 50/3)) {
>> + pr_err("SWReq is %d, should be at least %d\n", req_freq,
>> + min_freq - 50/3);
>> + igt_spinner_end(&spin);
>> + st_engine_heartbeat_enable(engine);
>> + err = -EINVAL;
>> + break;
>> + }
>> +
>> + act_freq = intel_rps_read_actual_frequency(rps);
>> + if (act_freq > max_act_freq)
>> + max_act_freq = act_freq;
>> +
>> + igt_spinner_end(&spin);
>> + st_engine_heartbeat_enable(engine);
>> + }
>> +
>> + pr_info("Max actual frequency for %s was %d\n",
>> + engine->name, max_act_freq);
>> +
>> + /* Actual frequency should rise above min */
>> + if (max_act_freq == slpc_min_freq) {
>> + pr_err("Actual freq did not rise above min\n");
>> + err = -EINVAL;
>> + }
>> +
>> + if (err)
>> + break;
>> + }
>> +
>> + /* Restore min/max frequencies */
>> + set_max_freq(slpc, slpc_max_freq);
>> + set_min_freq(slpc, slpc_min_freq);
>> +
>> + if (igt_flush_test(gt->i915))
>> + err = -EIO;
>> +
>> + intel_gt_pm_put(gt);
>> + igt_spinner_fini(&spin);
>> + intel_gt_pm_wait_for_idle(gt);
>> +
>> + return err;
>> +}
>> +
>> +int live_slpc_clamp_max(void *arg)
>> +{
>
> This test is really similar to live_slpc_clamp_min, have you tried to
> combine these into a single function with arguments?
We could, but the for loop in clamp min goes from min to max whereas
clamp_max goes from max to min. It's more intutive and easy to
understand if we keep it this way.
>
>> + struct drm_i915_private *i915 = arg;
>> + struct intel_gt *gt = &i915->gt;
>> + struct intel_guc_slpc *slpc;
>> + struct intel_rps *rps;
>> + struct intel_engine_cs *engine;
>> + enum intel_engine_id id;
>> + struct igt_spinner spin;
>> + int err = 0;
>> + u32 slpc_min_freq, slpc_max_freq;
>> +
>> + slpc = >->uc.guc.slpc;
>> + rps = >->rps;
>> +
>> + if (!intel_uc_uses_guc_slpc(>->uc))
>> + return 0;
>> +
>> + if (igt_spinner_init(&spin, gt))
>> + return -ENOMEM;
>> +
>> + if (intel_guc_slpc_get_max_freq(slpc, &slpc_max_freq)) {
>> + pr_err("Could not get SLPC max freq\n");
>> + return -EIO;
>> + }
>> +
>> + if (intel_guc_slpc_get_min_freq(slpc, &slpc_min_freq)) {
>> + pr_err("Could not get SLPC min freq\n");
>> + return -EIO;
>> + }
>> +
>> + if (slpc_min_freq == slpc_max_freq) {
>> + pr_err("Min/Max are fused to the same value\n");
>> + return -EINVAL;
>> + }
>> +
>> + intel_gt_pm_wait_for_idle(gt);
>> + intel_gt_pm_get(gt);
>> + for_each_engine(engine, gt, id) {
>> + struct i915_request *rq;
>> + u32 max_freq, req_freq;
>> + u32 act_freq, max_act_freq;
>> + u32 step;
>> +
>> + if (!intel_engine_can_store_dword(engine))
>> + continue;
>> +
>> + /* Go from max to min in 5 steps */
>> + step = (slpc_max_freq - slpc_min_freq) / NUM_STEPS;
>> + max_act_freq = slpc_min_freq;
>> + for (max_freq = slpc_max_freq; max_freq > slpc_min_freq;
>> + max_freq -= step) {
>> + err = set_max_freq(slpc, max_freq);
>> + if (err)
>> + break;
>> +
>> + st_engine_heartbeat_disable(engine);
>> +
>> + rq = igt_spinner_create_request(&spin,
>> + engine->kernel_context,
>> + MI_NOOP);
>> + if (IS_ERR(rq)) {
>> + st_engine_heartbeat_enable(engine);
>> + err = PTR_ERR(rq);
>> + break;
>> + }
>> +
>> + i915_request_add(rq);
>> +
>> + if (!igt_wait_for_spinner(&spin, rq)) {
>> + pr_err("%s: SLPC spinner did not start\n",
>> + engine->name);
>> + igt_spinner_end(&spin);
>> + st_engine_heartbeat_enable(engine);
>> + intel_gt_set_wedged(engine->gt);
>> + err = -EIO;
>> + break;
>> + }
>> +
>> + delay_for_h2g();
>> +
>> + /* Verify that SWREQ indeed was set to specific value */
>> + req_freq = intel_rps_read_punit_req_frequency(rps);
>> +
>> + /* GuC requests freq in multiples of 50/3 MHz */
>> + if (req_freq > (max_freq + 50/3)) {
>> + pr_err("SWReq is %d, should be at most %d\n", req_freq,
>> + max_freq + 50/3);
>> + igt_spinner_end(&spin);
>> + st_engine_heartbeat_enable(engine);
>> + err = -EINVAL;
>> + break;
>> + }
>> +
>> + act_freq = intel_rps_read_actual_frequency(rps);
>> + if (act_freq > max_act_freq)
>> + max_act_freq = act_freq;
>> +
>> + st_engine_heartbeat_enable(engine);
>> + igt_spinner_end(&spin);
>> +
>> + if (err)
>> + break;
>> + }
>> +
>> + pr_info("Max actual frequency for %s was %d\n",
>> + engine->name, max_act_freq);
>> +
>> + /* Actual frequency should rise above min */
>> + if (max_act_freq == slpc_min_freq) {
>> + pr_err("Actual freq did not rise above min\n");
>> + err = -EINVAL;
>> + }
>> +
>> + if (igt_flush_test(gt->i915)) {
>> + err = -EIO;
>> + break;
>> + }
>> +
>> + if (err)
>> + break;
>> + }
>> +
>> + /* Restore min/max freq */
>> + set_max_freq(slpc, slpc_max_freq);
>> + set_min_freq(slpc, slpc_min_freq);
>> +
>> + intel_gt_pm_put(gt);
>> + igt_spinner_fini(&spin);
>> + intel_gt_pm_wait_for_idle(gt);
>> +
>> + return err;
>> +}
>> +
>> +int intel_slpc_live_selftests(struct drm_i915_private *i915)
>> +{
>> + static const struct i915_subtest tests[] = {
>> + SUBTEST(live_slpc_clamp_max),
>> + SUBTEST(live_slpc_clamp_min),
>> + };
>> +
>> + if (intel_gt_is_wedged(&i915->gt))
>> + return 0;
>> +
>> + return i915_live_subtests(tests, i915);
>> +}
>> diff --git a/drivers/gpu/drm/i915/gt/selftest_slpc.h b/drivers/gpu/drm/i915/gt/selftest_slpc.h
>> new file mode 100644
>
> I don't think you need this header as selftest_slpc.c is the only user
> and you need to forward decl these functions. Even if you did, you could
> just forward decl these in the C file.
Sure, will remove.
Thanks,
Vinay.
>
> Matt
>
>> index 000000000000..0480e62ed3d7
>> --- /dev/null
>> +++ b/drivers/gpu/drm/i915/gt/selftest_slpc.h
>> @@ -0,0 +1,12 @@
>> +/* SPDX-License-Identifier: MIT */
>> +/*
>> + * Copyright © 2021 Intel Corporation
>> + */
>> +
>> +#ifndef SELFTEST_SLPC_H
>> +#define SELFTEST_SLPC_H
>> +
>> +int live_slpc_clamp_max(void *arg);
>> +int live_slpc_clamp_min(void *arg);
>> +
>> +#endif /* SELFTEST_SLPC_H */
>> diff --git a/drivers/gpu/drm/i915/selftests/i915_live_selftests.h b/drivers/gpu/drm/i915/selftests/i915_live_selftests.h
>> index e2fd1b61af71..1746a56dda06 100644
>> --- a/drivers/gpu/drm/i915/selftests/i915_live_selftests.h
>> +++ b/drivers/gpu/drm/i915/selftests/i915_live_selftests.h
>> @@ -47,5 +47,6 @@ selftest(hangcheck, intel_hangcheck_live_selftests)
>> selftest(execlists, intel_execlists_live_selftests)
>> selftest(ring_submission, intel_ring_submission_live_selftests)
>> selftest(perf, i915_perf_live_selftests)
>> +selftest(slpc, intel_slpc_live_selftests)
>> /* Here be dragons: keep last to run last! */
>> selftest(late_gt_pm, intel_gt_pm_late_selftests)
>> --
>> 2.25.0
>>
More information about the Intel-gfx
mailing list