[Intel-gfx] [PATCH 4/4] drm/i915/display: Add handling for new "active bpc" property

[Werner Sembach]

Am 07.06.21 um 08:47 schrieb Werner Sembach:
>
> Am 04.06.21 um 19:30 schrieb Ville Syrjälä:
>> On Fri, Jun 04, 2021 at 07:17:23PM +0200, Werner Sembach wrote:
>>> This commits implements the "active bpc" drm property for the Intel 
>>> GPU driver.
>>>
>>> Signed-off-by: Werner Sembach <wse at tuxedocomputers.com>
>>> ---
>>>   drivers/gpu/drm/i915/display/intel_display.c | 13 +++++++++++++
>>>   drivers/gpu/drm/i915/display/intel_dp.c      |  8 ++++++--
>>>   drivers/gpu/drm/i915/display/intel_dp_mst.c  |  4 +++-
>>>   drivers/gpu/drm/i915/display/intel_hdmi.c    |  4 +++-
>>>   4 files changed, 25 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/display/intel_display.c 
>>> b/drivers/gpu/drm/i915/display/intel_display.c
>>> index 64e9107d70f7..f7898d9d7438 100644
>>> --- a/drivers/gpu/drm/i915/display/intel_display.c
>>> +++ b/drivers/gpu/drm/i915/display/intel_display.c
>>> @@ -10164,6 +10164,8 @@ static void intel_atomic_commit_tail(struct 
>>> intel_atomic_state *state)
>>>       struct drm_i915_private *dev_priv = to_i915(dev);
>>>       struct intel_crtc_state *new_crtc_state, *old_crtc_state;
>>>       struct intel_crtc *crtc;
>>> +    struct drm_connector *connector;
>>> +    struct drm_connector_state *new_conn_state;
>>>       u64 put_domains[I915_MAX_PIPES] = {};
>>>       intel_wakeref_t wakeref = 0;
>>>       int i;
>>> @@ -10324,6 +10326,17 @@ static void intel_atomic_commit_tail(struct 
>>> intel_atomic_state *state)
>>>       }
>>>       intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref);
>>>   +    /* Extract information from crtc to communicate it to 
>>> userspace as connector properties */
>>> +    for_each_new_connector_in_state(&state->base, connector, 
>>> new_conn_state, i) {
>>> +        struct drm_crtc *crtc = new_conn_state->crtc;
>>> +        if (crtc) {
>>> +            new_crtc_state = 
>>> to_intel_crtc_state(drm_atomic_get_new_crtc_state(&state->base, crtc));
>> intel_atomic_get_new_crtc_state()
> Thanks, will use that.
>>
>>> + new_conn_state->active_bpc = new_crtc_state->pipe_bpp / 3;
>>> +        }
>>> +        else
>>> +            new_conn_state->active_bpc = 0;
>>> +    }
>> This also seems too late. I think the whole thing should be
>> done somewhere around the normal swap_state() stuff.
> Ok, will look into it.
So I tried to put it in intel_atomic_commit() after 
drm_atomic_helper_swap_state() and before 
INIT_WORK(&state->base.commit_work, intel_atomic_commit_work) (which 
creates a worker for intel_atomic_commit_tail), but somewhere in 
between, the connector_state seems to change: The bpc written with the 
for_each_new_connector_in_state() loop, gets discarded.
>>
>>> +
>>>       /*
>>>        * Defer the cleanup of the old state to a separate worker to not
>>>        * impede the current task (userspace for blocking modesets) that
>>> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c 
>>> b/drivers/gpu/drm/i915/display/intel_dp.c
>>> index 642c60f3d9b1..67826ba976ed 100644
>>> --- a/drivers/gpu/drm/i915/display/intel_dp.c
>>> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>>> @@ -4671,10 +4671,14 @@ intel_dp_add_properties(struct intel_dp 
>>> *intel_dp, struct drm_connector *connect
>>>           intel_attach_force_audio_property(connector);
>>>         intel_attach_broadcast_rgb_property(connector);
>>> -    if (HAS_GMCH(dev_priv))
>>> +    if (HAS_GMCH(dev_priv)) {
>>>           drm_connector_attach_max_bpc_property(connector, 6, 10);
>>> -    else if (DISPLAY_VER(dev_priv) >= 5)
>>> +        drm_connector_attach_active_bpc_property(connector, 6, 10);
>>> +    }
>>> +    else if (DISPLAY_VER(dev_priv) >= 5) {
>>>           drm_connector_attach_max_bpc_property(connector, 6, 12);
>>> +        drm_connector_attach_active_bpc_property(connector, 6, 12);
>>> +    }
>>>         /* Register HDMI colorspace for case of lspcon */
>>>       if (intel_bios_is_lspcon_present(dev_priv, port)) {
>>> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c 
>>> b/drivers/gpu/drm/i915/display/intel_dp_mst.c
>>> index 2daa3f67791e..5a1869dc2210 100644
>>> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
>>> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
>>> @@ -844,8 +844,10 @@ static struct drm_connector 
>>> *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
>>>        */
>>>       connector->max_bpc_property =
>>> intel_dp->attached_connector->base.max_bpc_property;
>>> -    if (connector->max_bpc_property)
>>> +    if (connector->max_bpc_property) {
>>>           drm_connector_attach_max_bpc_property(connector, 6, 12);
>>> +        drm_connector_attach_active_bpc_property(connector, 6, 12);
>>> +    }
>>>         return connector;
>>>   diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c 
>>> b/drivers/gpu/drm/i915/display/intel_hdmi.c
>>> index d69f0a6dc26d..8af78b27b6ce 100644
>>> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
>>> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
>>> @@ -2463,8 +2463,10 @@ intel_hdmi_add_properties(struct intel_hdmi 
>>> *intel_hdmi, struct drm_connector *c
>>>           drm_object_attach_property(&connector->base,
>>> connector->dev->mode_config.hdr_output_metadata_property, 0);
>>>   -    if (!HAS_GMCH(dev_priv))
>>> +    if (!HAS_GMCH(dev_priv)) {
>>>           drm_connector_attach_max_bpc_property(connector, 8, 12);
>>> +        drm_connector_attach_active_bpc_property(connector, 8, 12);
>>> +    }
>>>   }
>>>     /*
>>> -- 
>>> 2.25.1
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx