[Intel-gfx] [PATCH 3/6] drm/i915: Clean up intel_find_initial_plane_obj() a bit
Rodrigo Vivi
rodrigo.vivi at intel.com
Wed Jun 9 11:36:01 UTC 2021
On Wed, Jun 09, 2021 at 11:56:29AM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Sort out the mess with the local variables in
> intel_find_initial_plane_obj(). Get rid of all aliasing pointers
> and use standard naming/types.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 113 ++++++++++---------
> 1 file changed, 62 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 78815a1ac0ca..1615501685c9 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -1914,20 +1914,50 @@ static void intel_dpt_unpin(struct i915_address_space *vm)
> i915_vma_put(dpt->vma);
> }
>
> +static bool
> +intel_reuse_initial_plane_obj(struct drm_i915_private *i915,
> + const struct intel_initial_plane_config *plane_config,
> + struct drm_framebuffer **fb,
> + struct i915_vma **vma)
> +{
> + struct intel_crtc *crtc;
> +
> + for_each_intel_crtc(&i915->drm, crtc) {
> + struct intel_crtc_state *crtc_state =
> + to_intel_crtc_state(crtc->base.state);
> + struct intel_plane *plane =
> + to_intel_plane(crtc->base.primary);
> + struct intel_plane_state *plane_state =
> + to_intel_plane_state(plane->base.state);
> +
> + if (!crtc_state->uapi.active)
> + continue;
> +
> + if (!plane_state->ggtt_vma)
> + continue;
> +
> + if (intel_plane_ggtt_offset(plane_state) == plane_config->base) {
> + *fb = plane_state->hw.fb;
> + *vma = plane_state->ggtt_vma;
> + return true;
> + }
> + }
> +
> + return false;
> +}
> +
> static void
> -intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
> +intel_find_initial_plane_obj(struct intel_crtc *crtc,
> struct intel_initial_plane_config *plane_config)
> {
> - struct drm_device *dev = intel_crtc->base.dev;
> + struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - struct drm_crtc *c;
> - struct drm_plane *primary = intel_crtc->base.primary;
> - struct drm_plane_state *plane_state = primary->state;
> - struct intel_plane *intel_plane = to_intel_plane(primary);
> - struct intel_plane_state *intel_state =
> - to_intel_plane_state(plane_state);
> struct intel_crtc_state *crtc_state =
> - to_intel_crtc_state(intel_crtc->base.state);
> + to_intel_crtc_state(crtc->base.state);
> + struct intel_plane *plane =
> + to_intel_plane(crtc->base.primary);
> + struct intel_plane_state *plane_state =
> + to_intel_plane_state(plane->base.state);
> struct drm_framebuffer *fb;
> struct i915_vma *vma;
>
> @@ -1939,7 +1969,7 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
> if (!plane_config->fb)
> return;
>
> - if (intel_alloc_initial_plane_obj(intel_crtc, plane_config)) {
> + if (intel_alloc_initial_plane_obj(crtc, plane_config)) {
> fb = &plane_config->fb->base;
> vma = plane_config->vma;
> goto valid_fb;
> @@ -1949,25 +1979,8 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
> * Failed to alloc the obj, check to see if we should share
> * an fb with another CRTC instead
> */
> - for_each_crtc(dev, c) {
> - struct intel_plane_state *state;
> -
> - if (c == &intel_crtc->base)
> - continue;
> -
> - if (!to_intel_crtc_state(c->state)->uapi.active)
> - continue;
> -
> - state = to_intel_plane_state(c->primary->state);
> - if (!state->ggtt_vma)
> - continue;
> -
> - if (intel_plane_ggtt_offset(state) == plane_config->base) {
> - fb = state->hw.fb;
> - vma = state->ggtt_vma;
> - goto valid_fb;
> - }
> - }
> + if (intel_reuse_initial_plane_obj(dev_priv, plane_config, &fb, &vma))
> + goto valid_fb;
>
> /*
> * We've failed to reconstruct the BIOS FB. Current display state
> @@ -1976,7 +1989,7 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
> * simplest solution is to just disable the primary plane now and
> * pretend the BIOS never had it enabled.
> */
> - intel_plane_disable_noatomic(intel_crtc, intel_plane);
> + intel_plane_disable_noatomic(crtc, plane);
> if (crtc_state->bigjoiner) {
> struct intel_crtc *slave =
> crtc_state->bigjoiner_linked_crtc;
> @@ -1986,40 +1999,38 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
> return;
>
> valid_fb:
> - plane_state->rotation = plane_config->rotation;
> - intel_fb_fill_view(to_intel_framebuffer(fb), plane_state->rotation,
> - &intel_state->view);
> + plane_state->uapi.rotation = plane_config->rotation;
> + intel_fb_fill_view(to_intel_framebuffer(fb),
> + plane_state->uapi.rotation, &plane_state->view);
>
> __i915_vma_pin(vma);
> - intel_state->ggtt_vma = i915_vma_get(vma);
> - if (intel_plane_uses_fence(intel_state) && i915_vma_pin_fence(vma) == 0)
> - if (vma->fence)
> - intel_state->flags |= PLANE_HAS_FENCE;
> + plane_state->ggtt_vma = i915_vma_get(vma);
> + if (intel_plane_uses_fence(plane_state) &&
> + i915_vma_pin_fence(vma) == 0 && vma->fence)
> + plane_state->flags |= PLANE_HAS_FENCE;
>
> - plane_state->src_x = 0;
> - plane_state->src_y = 0;
> - plane_state->src_w = fb->width << 16;
> - plane_state->src_h = fb->height << 16;
> + plane_state->uapi.src_x = 0;
> + plane_state->uapi.src_y = 0;
> + plane_state->uapi.src_w = fb->width << 16;
> + plane_state->uapi.src_h = fb->height << 16;
>
> - plane_state->crtc_x = 0;
> - plane_state->crtc_y = 0;
> - plane_state->crtc_w = fb->width;
> - plane_state->crtc_h = fb->height;
> + plane_state->uapi.crtc_x = 0;
> + plane_state->uapi.crtc_y = 0;
> + plane_state->uapi.crtc_w = fb->width;
> + plane_state->uapi.crtc_h = fb->height;
>
> if (plane_config->tiling)
> dev_priv->preserve_bios_swizzle = true;
>
> - plane_state->fb = fb;
> + plane_state->uapi.fb = fb;
I believe we should have a separated patch for these plane_state uapi changes
> drm_framebuffer_get(fb);
>
> - plane_state->crtc = &intel_crtc->base;
> - intel_plane_copy_uapi_to_hw_state(intel_state, intel_state,
> - intel_crtc);
> + plane_state->uapi.crtc = &crtc->base;
> + intel_plane_copy_uapi_to_hw_state(plane_state, plane_state, crtc);
>
> intel_frontbuffer_flush(to_intel_frontbuffer(fb), ORIGIN_DIRTYFB);
>
> - atomic_or(to_intel_plane(primary)->frontbuffer_bit,
> - &to_intel_frontbuffer(fb)->bits);
> + atomic_or(plane->frontbuffer_bit, &to_intel_frontbuffer(fb)->bits);
> }
>
> unsigned int
> --
> 2.31.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list