[Intel-gfx] [PATCH v2 14/17] drm/i915: Fix ehl edp hbr2 vswing table

Jani Nikula jani.nikula at linux.intel.com
Wed Jun 23 14:02:32 UTC 2021


On Tue, 08 Jun 2021, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> EHL is supposed to use special buf trans values for eDP HBR2+.
> Add such a table.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> ---
>  .../drm/i915/display/intel_ddi_buf_trans.c    | 28 +++++++++++++++++--
>  1 file changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> index 6e2b6c851fb4..9398aa62585b 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> @@ -672,6 +672,25 @@ static const struct intel_ddi_buf_trans ehl_combo_phy_ddi_translations_dp = {
>  	.num_entries = ARRAY_SIZE(_ehl_combo_phy_ddi_translations_dp),
>  };
>  
> +static const union intel_ddi_buf_trans_entry _ehl_combo_phy_ddi_translations_edp_hbr2[] = {
> +							/* NT mV Trans mV db    */
> +	{ .cnl = { 0x8, 0x7F, 0x3F, 0x00, 0x00 } },	/* 200   200      0.0   */
> +	{ .cnl = { 0x8, 0x7F, 0x3F, 0x00, 0x00 } },	/* 200   250      1.9   */
> +	{ .cnl = { 0x1, 0x7F, 0x3D, 0x00, 0x02 } },	/* 200   300      3.5   */
> +	{ .cnl = { 0xA, 0x35, 0x39, 0x00, 0x06 } },	/* 200   350      4.9   */
> +	{ .cnl = { 0x8, 0x7F, 0x3F, 0x00, 0x00 } },	/* 250   250      0.0   */
> +	{ .cnl = { 0x1, 0x7F, 0x3C, 0x00, 0x03 } },	/* 250   300      1.6   */
> +	{ .cnl = { 0xA, 0x35, 0x39, 0x00, 0x06 } },	/* 250   350      2.9   */
> +	{ .cnl = { 0x1, 0x7F, 0x3F, 0x00, 0x00 } },	/* 300   300      0.0   */
> +	{ .cnl = { 0xA, 0x35, 0x38, 0x00, 0x07 } },	/* 300   350      1.3   */
> +	{ .cnl = { 0xA, 0x35, 0x3F, 0x00, 0x00 } },	/* 350   350      0.0   */
> +};
> +
> +static const struct intel_ddi_buf_trans ehl_combo_phy_ddi_translations_edp_hbr2 = {
> +	.entries = _ehl_combo_phy_ddi_translations_edp_hbr2,
> +	.num_entries = ARRAY_SIZE(_ehl_combo_phy_ddi_translations_edp_hbr2),
> +};
> +
>  static const union intel_ddi_buf_trans_entry _jsl_combo_phy_ddi_translations_edp_hbr[] = {
>  							/* NT mV Trans mV db    */
>  	{ .cnl = { 0x8, 0x7F, 0x3F, 0x00, 0x00 } },	/* 200   200      0.0   */
> @@ -1384,8 +1403,13 @@ ehl_get_combo_buf_trans_edp(struct intel_encoder *encoder,
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  
>  	if (dev_priv->vbt.edp.low_vswing) {
> -		return intel_get_buf_trans(&icl_combo_phy_ddi_translations_edp_hbr2,
> -					   n_entries);
> +		if (crtc_state->port_clock > 270000) {
> +			return intel_get_buf_trans(&ehl_combo_phy_ddi_translations_edp_hbr2,
> +						   n_entries);
> +		} else {
> +			return intel_get_buf_trans(&icl_combo_phy_ddi_translations_edp_hbr2,
> +						   n_entries);
> +		}
>  	}
>  
>  	return ehl_get_combo_buf_trans_dp(encoder, crtc_state, n_entries);

-- 
Jani Nikula, Intel Open Source Graphics Center


More information about the Intel-gfx mailing list