[Intel-gfx] [PATCH v4 1/4] drm/i915/mso: add splitter state readout for platforms that support it
Jani Nikula
jani.nikula at intel.com
Tue Mar 2 11:02:59 UTC 2021
Add splitter configuration to crtc state, and read it where
supported. Also add splitter state dumping. The stream splitter will be
required for eDP MSO.
v4:
- Catch invalid splitter configuration (Uma)
v3:
- Convert segment timings to full panel timings.
- Refer to splitter instead of mso in crtc state.
- Dump splitter state.
v2: Add warning for mso being enabled on pipes other than A.
Cc: Nischal Varide <nischal.varide at intel.com>
Cc: Uma Shankar <uma.shankar at intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 41 +++++++++++++++++++
drivers/gpu/drm/i915/display/intel_display.c | 31 +++++++++++++-
.../drm/i915/display/intel_display_types.h | 7 ++++
drivers/gpu/drm/i915/i915_drv.h | 2 +
4 files changed, 79 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index eeae78097a20..d4cfe7e85538 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -2136,6 +2136,45 @@ static void intel_ddi_power_up_lanes(struct intel_encoder *encoder,
}
}
+static void intel_ddi_mso_get_config(struct intel_encoder *encoder,
+ struct intel_crtc_state *pipe_config)
+{
+ struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
+ struct drm_i915_private *i915 = to_i915(crtc->base.dev);
+ enum pipe pipe = crtc->pipe;
+ u32 dss1;
+
+ if (!HAS_MSO(i915))
+ return;
+
+ dss1 = intel_de_read(i915, ICL_PIPE_DSS_CTL1(pipe));
+
+ pipe_config->splitter.enable = dss1 & SPLITTER_ENABLE;
+ if (!pipe_config->splitter.enable)
+ return;
+
+ /* Splitter enable is supported for pipe A only. */
+ if (drm_WARN_ON(&i915->drm, pipe != PIPE_A)) {
+ pipe_config->splitter.enable = false;
+ return;
+ }
+
+ switch (dss1 & SPLITTER_CONFIGURATION_MASK) {
+ default:
+ drm_WARN(&i915->drm, true,
+ "Invalid splitter configuration, dss1=0x%08x\n", dss1);
+ fallthrough;
+ case SPLITTER_CONFIGURATION_2_SEGMENT:
+ pipe_config->splitter.link_count = 2;
+ break;
+ case SPLITTER_CONFIGURATION_4_SEGMENT:
+ pipe_config->splitter.link_count = 4;
+ break;
+ }
+
+ pipe_config->splitter.pixel_overlap = REG_FIELD_GET(OVERLAP_PIXELS_MASK, dss1);
+}
+
static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
@@ -3316,6 +3355,8 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
intel_ddi_read_func_ctl(encoder, pipe_config);
}
+ intel_ddi_mso_get_config(encoder, pipe_config);
+
pipe_config->has_audio =
intel_ddi_is_audio_enabled(dev_priv, cpu_transcoder);
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index d0da88751c72..49f2a974eca2 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -4859,8 +4859,30 @@ static void intel_crtc_readout_derived_state(struct intel_crtc_state *crtc_state
pipe_mode->crtc_clock /= 2;
}
- intel_mode_from_crtc_timings(pipe_mode, pipe_mode);
- intel_mode_from_crtc_timings(adjusted_mode, adjusted_mode);
+ if (crtc_state->splitter.enable) {
+ int n = crtc_state->splitter.link_count;
+ int overlap = crtc_state->splitter.pixel_overlap;
+
+ /*
+ * eDP MSO uses segment timings from EDID for transcoder
+ * timings, but full mode for everything else.
+ *
+ * h_full = (h_segment - pixel_overlap) * link_count
+ */
+ pipe_mode->crtc_hdisplay = (pipe_mode->crtc_hdisplay - overlap) * n;
+ pipe_mode->crtc_hblank_start = (pipe_mode->crtc_hblank_start - overlap) * n;
+ pipe_mode->crtc_hblank_end = (pipe_mode->crtc_hblank_end - overlap) * n;
+ pipe_mode->crtc_hsync_start = (pipe_mode->crtc_hsync_start - overlap) * n;
+ pipe_mode->crtc_hsync_end = (pipe_mode->crtc_hsync_end - overlap) * n;
+ pipe_mode->crtc_htotal = (pipe_mode->crtc_htotal - overlap) * n;
+ pipe_mode->crtc_clock *= n;
+
+ intel_mode_from_crtc_timings(pipe_mode, pipe_mode);
+ intel_mode_from_crtc_timings(adjusted_mode, pipe_mode);
+ } else {
+ intel_mode_from_crtc_timings(pipe_mode, pipe_mode);
+ intel_mode_from_crtc_timings(adjusted_mode, adjusted_mode);
+ }
intel_crtc_compute_pixel_rate(crtc_state);
@@ -8259,6 +8281,11 @@ static void intel_dump_pipe_config(const struct intel_crtc_state *pipe_config,
pipe_config->bigjoiner_slave ? "slave" :
pipe_config->bigjoiner ? "master" : "no");
+ drm_dbg_kms(&dev_priv->drm, "splitter: %s, link count %d, overlap %d\n",
+ enableddisabled(pipe_config->splitter.enable),
+ pipe_config->splitter.link_count,
+ pipe_config->splitter.pixel_overlap);
+
if (pipe_config->has_pch_encoder)
intel_dump_m_n_config(pipe_config, "fdi",
pipe_config->fdi_lanes,
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 1a76e1d9de7a..9f1945018712 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1166,6 +1166,13 @@ struct intel_crtc_state {
u8 pipeline_full;
u16 flipline, vmin, vmax;
} vrr;
+
+ /* Stream Splitter for eDP MSO */
+ struct {
+ bool enable;
+ u8 link_count;
+ u8 pixel_overlap;
+ } splitter;
};
enum intel_pipe_crc_source {
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index f8413b3b9da8..47acb4f8cb1f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1709,6 +1709,8 @@ tgl_stepping_get(struct drm_i915_private *dev_priv)
#define HAS_CSR(dev_priv) (INTEL_INFO(dev_priv)->display.has_csr)
+#define HAS_MSO(i915) (INTEL_GEN(i915) >= 12)
+
#define HAS_RUNTIME_PM(dev_priv) (INTEL_INFO(dev_priv)->has_runtime_pm)
#define HAS_64BIT_RELOC(dev_priv) (INTEL_INFO(dev_priv)->has_64bit_reloc)
--
2.20.1
More information about the Intel-gfx
mailing list