[Intel-gfx] [PATCH 2/4] drm/i915: Don't try to query the frame counter for disabled pipes

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

For platforms/outputs without hardware frame counters we can't
call drm_crtc_accurate_vblank_count() when the vblank support is
disabled or we just get a WARN due to the crtc timings
(vblank->hwmode) being considered invalid. Note that until the
pipe in question has been enabled and drm_crtc_set_max_vblank_count()
has been called on it we would also take this path on platforms
which have a working frame counter. So getting the WARN is rather
likely on any platform unless you always boot with lots of displays
plugged in.

Also even on hardware with a working frame counter we may not be
able to read the actual frame counter register on disabled pipes
due the relevant power well being disabled. Ie. would just result
in the unclaimed reg spew.

So let's just avoid all this an directly report zero in case
the pipe is disabled.

Reported-by: Steven Rostedt <rostedt at goodmis.org>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_crtc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c b/drivers/gpu/drm/i915/display/intel_crtc.c
index fd8a66cece80..34ff40852a37 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.c
+++ b/drivers/gpu/drm/i915/display/intel_crtc.c
@@ -41,6 +41,9 @@ u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc)
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_vblank_crtc *vblank = &dev->vblank[drm_crtc_index(&crtc->base)];
 
+	if (!crtc->active)
+		return 0;
+
 	if (!vblank->max_vblank_count)
 		return (u32)drm_crtc_accurate_vblank_count(&crtc->base);
 
-- 
2.26.2