[Intel-gfx] [PATCH 11/23] drm/i915/intel_fb: Pull FB plane functions from intel_display.c
Imre Deak
imre.deak at intel.com
Wed Mar 10 22:17:24 UTC 2021
Move the FB plane specific functions from intel_display.c to intel_fb.c.
There's more functions like this, but I leave moving those as well for a
follow up, and for now moving only the ones needed by the end of this
patchset (adding support for padding tile-rows in an FB GGTT view).
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
drivers/gpu/drm/i915/display/i9xx_plane.c | 1 +
drivers/gpu/drm/i915/display/intel_cursor.c | 1 +
drivers/gpu/drm/i915/display/intel_display.c | 818 -------------------
drivers/gpu/drm/i915/display/intel_display.h | 17 -
drivers/gpu/drm/i915/display/intel_fb.c | 807 ++++++++++++++++++
drivers/gpu/drm/i915/display/intel_fb.h | 31 +
6 files changed, 840 insertions(+), 835 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/i9xx_plane.c b/drivers/gpu/drm/i915/display/i9xx_plane.c
index 8a52beaed2da..6052e627ae57 100644
--- a/drivers/gpu/drm/i915/display/i9xx_plane.c
+++ b/drivers/gpu/drm/i915/display/i9xx_plane.c
@@ -11,6 +11,7 @@
#include "intel_atomic.h"
#include "intel_atomic_plane.h"
#include "intel_display_types.h"
+#include "intel_fb.h"
#include "intel_sprite.h"
#include "i9xx_plane.h"
diff --git a/drivers/gpu/drm/i915/display/intel_cursor.c b/drivers/gpu/drm/i915/display/intel_cursor.c
index 21fe4d2753e9..a245f45f5b3a 100644
--- a/drivers/gpu/drm/i915/display/intel_cursor.c
+++ b/drivers/gpu/drm/i915/display/intel_cursor.c
@@ -15,6 +15,7 @@
#include "intel_cursor.h"
#include "intel_display_types.h"
#include "intel_display.h"
+#include "intel_fb.h"
#include "intel_frontbuffer.h"
#include "intel_pm.h"
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index deaf7ddadff1..6117d43a4e49 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -854,19 +854,6 @@ void intel_disable_pipe(const struct intel_crtc_state *old_crtc_state)
intel_wait_for_pipe_off(old_crtc_state);
}
-static unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
-{
- return IS_GEN(dev_priv, 2) ? 2048 : 4096;
-}
-
-static bool is_aux_plane(const struct drm_framebuffer *fb, int plane)
-{
- if (is_ccs_modifier(fb->modifier))
- return is_ccs_plane(fb, plane);
-
- return plane == 1;
-}
-
bool
intel_format_info_is_yuv_semiplanar(const struct drm_format_info *info,
u64 modifier)
@@ -875,13 +862,6 @@ intel_format_info_is_yuv_semiplanar(const struct drm_format_info *info,
info->num_planes == (is_ccs_modifier(modifier) ? 4 : 2);
}
-static bool is_semiplanar_uv_plane(const struct drm_framebuffer *fb,
- int color_plane)
-{
- return intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier) &&
- color_plane == 1;
-}
-
unsigned int
intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
{
@@ -936,38 +916,6 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
}
}
-unsigned int
-intel_tile_height(const struct drm_framebuffer *fb, int color_plane)
-{
- if (is_gen12_ccs_plane(fb, color_plane))
- return 1;
-
- return intel_tile_size(to_i915(fb->dev)) /
- intel_tile_width_bytes(fb, color_plane);
-}
-
-/* Return the tile dimensions in pixel units */
-static void intel_tile_dims(const struct drm_framebuffer *fb, int color_plane,
- unsigned int *tile_width,
- unsigned int *tile_height)
-{
- unsigned int tile_width_bytes = intel_tile_width_bytes(fb, color_plane);
- unsigned int cpp = fb->format->cpp[color_plane];
-
- *tile_width = tile_width_bytes / cpp;
- *tile_height = intel_tile_height(fb, color_plane);
-}
-
-static unsigned int intel_tile_row_size(const struct drm_framebuffer *fb,
- int color_plane)
-{
- unsigned int tile_width, tile_height;
-
- intel_tile_dims(fb, color_plane, &tile_width, &tile_height);
-
- return fb->pitches[color_plane] * tile_height;
-}
-
unsigned int
intel_fb_align_height(const struct drm_framebuffer *fb,
int color_plane, unsigned int height)
@@ -999,32 +947,6 @@ unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info
return size;
}
-static void
-intel_fill_fb_ggtt_view(struct i915_ggtt_view *view,
- const struct drm_framebuffer *fb,
- unsigned int rotation)
-{
- memset(view, 0, sizeof(*view));
-
- view->type = I915_GGTT_VIEW_NORMAL;
- if (drm_rotation_90_or_270(rotation)) {
- view->type = I915_GGTT_VIEW_ROTATED;
- view->rotated = to_intel_framebuffer(fb)->rot_info;
- }
-}
-
-static unsigned int intel_cursor_alignment(const struct drm_i915_private *dev_priv)
-{
- if (IS_I830(dev_priv))
- return 16 * 1024;
- else if (IS_I85X(dev_priv))
- return 256;
- else if (IS_I845G(dev_priv) || IS_I865G(dev_priv))
- return 32;
- else
- return 4 * 1024;
-}
-
static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) >= 9)
@@ -1195,15 +1117,6 @@ void intel_unpin_fb_vma(struct i915_vma *vma, unsigned long flags)
i915_vma_put(vma);
}
-static int intel_fb_pitch(const struct drm_framebuffer *fb, int color_plane,
- unsigned int rotation)
-{
- if (drm_rotation_90_or_270(rotation))
- return to_intel_framebuffer(fb)->rotated[color_plane].pitch;
- else
- return fb->pitches[color_plane];
-}
-
/*
* Convert the x/y offsets into a linear offset.
* Only valid with 0/180 degree rotation, which is fine since linear
@@ -1235,224 +1148,6 @@ void intel_add_fb_offsets(int *x, int *y,
*y += state->color_plane[color_plane].y;
}
-static u32 intel_adjust_tile_offset(int *x, int *y,
- unsigned int tile_width,
- unsigned int tile_height,
- unsigned int tile_size,
- unsigned int pitch_tiles,
- u32 old_offset,
- u32 new_offset)
-{
- unsigned int pitch_pixels = pitch_tiles * tile_width;
- unsigned int tiles;
-
- WARN_ON(old_offset & (tile_size - 1));
- WARN_ON(new_offset & (tile_size - 1));
- WARN_ON(new_offset > old_offset);
-
- tiles = (old_offset - new_offset) / tile_size;
-
- *y += tiles / pitch_tiles * tile_height;
- *x += tiles % pitch_tiles * tile_width;
-
- /* minimize x in case it got needlessly big */
- *y += *x / pitch_pixels * tile_height;
- *x %= pitch_pixels;
-
- return new_offset;
-}
-
-static u32 intel_adjust_aligned_offset(int *x, int *y,
- const struct drm_framebuffer *fb,
- int color_plane,
- unsigned int rotation,
- unsigned int pitch,
- u32 old_offset, u32 new_offset)
-{
- struct drm_i915_private *dev_priv = to_i915(fb->dev);
- unsigned int cpp = fb->format->cpp[color_plane];
-
- drm_WARN_ON(&dev_priv->drm, new_offset > old_offset);
-
- if (!is_surface_linear(fb, color_plane)) {
- unsigned int tile_size, tile_width, tile_height;
- unsigned int pitch_tiles;
-
- tile_size = intel_tile_size(dev_priv);
- intel_tile_dims(fb, color_plane, &tile_width, &tile_height);
-
- if (drm_rotation_90_or_270(rotation)) {
- pitch_tiles = pitch / tile_height;
- swap(tile_width, tile_height);
- } else {
- pitch_tiles = pitch / (tile_width * cpp);
- }
-
- intel_adjust_tile_offset(x, y, tile_width, tile_height,
- tile_size, pitch_tiles,
- old_offset, new_offset);
- } else {
- old_offset += *y * pitch + *x * cpp;
-
- *y = (old_offset - new_offset) / pitch;
- *x = ((old_offset - new_offset) - *y * pitch) / cpp;
- }
-
- return new_offset;
-}
-
-/*
- * Adjust the tile offset by moving the difference into
- * the x/y offsets.
- */
-u32 intel_plane_adjust_aligned_offset(int *x, int *y,
- const struct intel_plane_state *state,
- int color_plane,
- u32 old_offset, u32 new_offset)
-{
- return intel_adjust_aligned_offset(x, y, state->hw.fb, color_plane,
- state->hw.rotation,
- state->color_plane[color_plane].stride,
- old_offset, new_offset);
-}
-
-/*
- * Computes the aligned offset to the base tile and adjusts
- * x, y. bytes per pixel is assumed to be a power-of-two.
- *
- * In the 90/270 rotated case, x and y are assumed
- * to be already rotated to match the rotated GTT view, and
- * pitch is the tile_height aligned framebuffer height.
- *
- * This function is used when computing the derived information
- * under intel_framebuffer, so using any of that information
- * here is not allowed. Anything under drm_framebuffer can be
- * used. This is why the user has to pass in the pitch since it
- * is specified in the rotated orientation.
- */
-static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv,
- int *x, int *y,
- const struct drm_framebuffer *fb,
- int color_plane,
- unsigned int pitch,
- unsigned int rotation,
- u32 alignment)
-{
- unsigned int cpp = fb->format->cpp[color_plane];
- u32 offset, offset_aligned;
-
- if (!is_surface_linear(fb, color_plane)) {
- unsigned int tile_size, tile_width, tile_height;
- unsigned int tile_rows, tiles, pitch_tiles;
-
- tile_size = intel_tile_size(dev_priv);
- intel_tile_dims(fb, color_plane, &tile_width, &tile_height);
-
- if (drm_rotation_90_or_270(rotation)) {
- pitch_tiles = pitch / tile_height;
- swap(tile_width, tile_height);
- } else {
- pitch_tiles = pitch / (tile_width * cpp);
- }
-
- tile_rows = *y / tile_height;
- *y %= tile_height;
-
- tiles = *x / tile_width;
- *x %= tile_width;
-
- offset = (tile_rows * pitch_tiles + tiles) * tile_size;
-
- offset_aligned = offset;
- if (alignment)
- offset_aligned = rounddown(offset_aligned, alignment);
-
- intel_adjust_tile_offset(x, y, tile_width, tile_height,
- tile_size, pitch_tiles,
- offset, offset_aligned);
- } else {
- offset = *y * pitch + *x * cpp;
- offset_aligned = offset;
- if (alignment) {
- offset_aligned = rounddown(offset_aligned, alignment);
- *y = (offset % alignment) / pitch;
- *x = ((offset % alignment) - *y * pitch) / cpp;
- } else {
- *y = *x = 0;
- }
- }
-
- return offset_aligned;
-}
-
-u32 intel_plane_compute_aligned_offset(int *x, int *y,
- const struct intel_plane_state *state,
- int color_plane)
-{
- struct intel_plane *intel_plane = to_intel_plane(state->uapi.plane);
- struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev);
- const struct drm_framebuffer *fb = state->hw.fb;
- unsigned int rotation = state->hw.rotation;
- int pitch = state->color_plane[color_plane].stride;
- u32 alignment;
-
- if (intel_plane->id == PLANE_CURSOR)
- alignment = intel_cursor_alignment(dev_priv);
- else
- alignment = intel_surf_alignment(fb, color_plane);
-
- return intel_compute_aligned_offset(dev_priv, x, y, fb, color_plane,
- pitch, rotation, alignment);
-}
-
-/* Convert the fb->offset[] into x/y offsets */
-static int intel_fb_offset_to_xy(int *x, int *y,
- const struct drm_framebuffer *fb,
- int color_plane)
-{
- struct drm_i915_private *dev_priv = to_i915(fb->dev);
- unsigned int height;
- u32 alignment;
-
- if (INTEL_GEN(dev_priv) >= 12 &&
- is_semiplanar_uv_plane(fb, color_plane))
- alignment = intel_tile_row_size(fb, color_plane);
- else if (fb->modifier != DRM_FORMAT_MOD_LINEAR)
- alignment = intel_tile_size(dev_priv);
- else
- alignment = 0;
-
- if (alignment != 0 && fb->offsets[color_plane] % alignment) {
- drm_dbg_kms(&dev_priv->drm,
- "Misaligned offset 0x%08x for color plane %d\n",
- fb->offsets[color_plane], color_plane);
- return -EINVAL;
- }
-
- height = drm_framebuffer_plane_height(fb->height, fb, color_plane);
- height = ALIGN(height, intel_tile_height(fb, color_plane));
-
- /* Catch potential overflows early */
- if (add_overflows_t(u32, mul_u32_u32(height, fb->pitches[color_plane]),
- fb->offsets[color_plane])) {
- drm_dbg_kms(&dev_priv->drm,
- "Bad offset 0x%08x or pitch %d for color plane %d\n",
- fb->offsets[color_plane], fb->pitches[color_plane],
- color_plane);
- return -ERANGE;
- }
-
- *x = 0;
- *y = 0;
-
- intel_adjust_aligned_offset(x, y,
- fb, color_plane, DRM_MODE_ROTATE_0,
- fb->pitches[color_plane],
- fb->offsets[color_plane], 0);
-
- return 0;
-}
-
static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)
{
switch (fb_modifier) {
@@ -1688,519 +1383,6 @@ intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane)
return tile_width;
}
-bool intel_plane_can_remap(const struct intel_plane_state *plane_state)
-{
- struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
- struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- const struct drm_framebuffer *fb = plane_state->hw.fb;
- int i;
-
- /* We don't want to deal with remapping with cursors */
- if (plane->id == PLANE_CURSOR)
- return false;
-
- /*
- * The display engine limits already match/exceed the
- * render engine limits, so not much point in remapping.
- * Would also need to deal with the fence POT alignment
- * and gen2 2KiB GTT tile size.
- */
- if (INTEL_GEN(dev_priv) < 4)
- return false;
-
- /*
- * The new CCS hash mode isn't compatible with remapping as
- * the virtual address of the pages affects the compressed data.
- */
- if (is_ccs_modifier(fb->modifier))
- return false;
-
- /* Linear needs a page aligned stride for remapping */
- if (fb->modifier == DRM_FORMAT_MOD_LINEAR) {
- unsigned int alignment = intel_tile_size(dev_priv) - 1;
-
- for (i = 0; i < fb->format->num_planes; i++) {
- if (fb->pitches[i] & alignment)
- return false;
- }
- }
-
- return true;
-}
-
-static bool intel_plane_needs_remap(const struct intel_plane_state *plane_state)
-{
- struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
- const struct drm_framebuffer *fb = plane_state->hw.fb;
- unsigned int rotation = plane_state->hw.rotation;
- u32 stride, max_stride;
-
- /*
- * No remapping for invisible planes since we don't have
- * an actual source viewport to remap.
- */
- if (!plane_state->uapi.visible)
- return false;
-
- if (!intel_plane_can_remap(plane_state))
- return false;
-
- /*
- * FIXME: aux plane limits on gen9+ are
- * unclear in Bspec, for now no checking.
- */
- stride = intel_fb_pitch(fb, 0, rotation);
- max_stride = plane->max_stride(plane, fb->format->format,
- fb->modifier, rotation);
-
- return stride > max_stride;
-}
-
-void
-intel_fb_plane_get_subsampling(int *hsub, int *vsub,
- const struct drm_framebuffer *fb,
- int color_plane)
-{
- int main_plane;
-
- if (color_plane == 0) {
- *hsub = 1;
- *vsub = 1;
-
- return;
- }
-
- /*
- * TODO: Deduct the subsampling from the char block for all CCS
- * formats and planes.
- */
- if (!is_gen12_ccs_plane(fb, color_plane)) {
- *hsub = fb->format->hsub;
- *vsub = fb->format->vsub;
-
- return;
- }
-
- main_plane = skl_ccs_to_main_plane(fb, color_plane);
- *hsub = drm_format_info_block_width(fb->format, color_plane) /
- drm_format_info_block_width(fb->format, main_plane);
-
- /*
- * The min stride check in the core framebuffer_check() function
- * assumes that format->hsub applies to every plane except for the
- * first plane. That's incorrect for the CCS AUX plane of the first
- * plane, but for the above check to pass we must define the block
- * width with that subsampling applied to it. Adjust the width here
- * accordingly, so we can calculate the actual subsampling factor.
- */
- if (main_plane == 0)
- *hsub *= fb->format->hsub;
-
- *vsub = 32;
-}
-static int
-intel_fb_check_ccs_xy(struct drm_framebuffer *fb, int ccs_plane, int x, int y)
-{
- struct drm_i915_private *i915 = to_i915(fb->dev);
- struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- int main_plane;
- int hsub, vsub;
- int tile_width, tile_height;
- int ccs_x, ccs_y;
- int main_x, main_y;
-
- if (!is_ccs_plane(fb, ccs_plane) || is_gen12_ccs_cc_plane(fb, ccs_plane))
- return 0;
-
- intel_tile_dims(fb, ccs_plane, &tile_width, &tile_height);
- intel_fb_plane_get_subsampling(&hsub, &vsub, fb, ccs_plane);
-
- tile_width *= hsub;
- tile_height *= vsub;
-
- ccs_x = (x * hsub) % tile_width;
- ccs_y = (y * vsub) % tile_height;
-
- main_plane = skl_ccs_to_main_plane(fb, ccs_plane);
- main_x = intel_fb->normal[main_plane].x % tile_width;
- main_y = intel_fb->normal[main_plane].y % tile_height;
-
- /*
- * CCS doesn't have its own x/y offset register, so the intra CCS tile
- * x/y offsets must match between CCS and the main surface.
- */
- if (main_x != ccs_x || main_y != ccs_y) {
- drm_dbg_kms(&i915->drm,
- "Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n",
- main_x, main_y,
- ccs_x, ccs_y,
- intel_fb->normal[main_plane].x,
- intel_fb->normal[main_plane].y,
- x, y);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void
-intel_fb_plane_dims(int *w, int *h, struct drm_framebuffer *fb, int color_plane)
-{
- int main_plane = is_ccs_plane(fb, color_plane) ?
- skl_ccs_to_main_plane(fb, color_plane) : 0;
- int main_hsub, main_vsub;
- int hsub, vsub;
-
- intel_fb_plane_get_subsampling(&main_hsub, &main_vsub, fb, main_plane);
- intel_fb_plane_get_subsampling(&hsub, &vsub, fb, color_plane);
- *w = fb->width / main_hsub / hsub;
- *h = fb->height / main_vsub / vsub;
-}
-
-/*
- * Setup the rotated view for an FB plane and return the size the GTT mapping
- * requires for this view.
- */
-static u32
-setup_fb_rotation(int plane, const struct intel_remapped_plane_info *plane_info,
- u32 gtt_offset_rotated, int x, int y,
- unsigned int width, unsigned int height,
- unsigned int tile_size,
- unsigned int tile_width, unsigned int tile_height,
- struct drm_framebuffer *fb)
-{
- struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- struct intel_rotation_info *rot_info = &intel_fb->rot_info;
- unsigned int pitch_tiles;
- struct drm_rect r;
-
- /* Y or Yf modifiers required for 90/270 rotation */
- if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
- fb->modifier != I915_FORMAT_MOD_Yf_TILED)
- return 0;
-
- if (drm_WARN_ON(fb->dev, plane >= ARRAY_SIZE(rot_info->plane)))
- return 0;
-
- rot_info->plane[plane] = *plane_info;
-
- intel_fb->rotated[plane].pitch = plane_info->height * tile_height;
-
- /* rotate the x/y offsets to match the GTT view */
- drm_rect_init(&r, x, y, width, height);
- drm_rect_rotate(&r,
- plane_info->width * tile_width,
- plane_info->height * tile_height,
- DRM_MODE_ROTATE_270);
- x = r.x1;
- y = r.y1;
-
- /* rotate the tile dimensions to match the GTT view */
- pitch_tiles = intel_fb->rotated[plane].pitch / tile_height;
- swap(tile_width, tile_height);
-
- /*
- * We only keep the x/y offsets, so push all of the
- * gtt offset into the x/y offsets.
- */
- intel_adjust_tile_offset(&x, &y,
- tile_width, tile_height,
- tile_size, pitch_tiles,
- gtt_offset_rotated * tile_size, 0);
-
- /*
- * First pixel of the framebuffer from
- * the start of the rotated gtt mapping.
- */
- intel_fb->rotated[plane].x = x;
- intel_fb->rotated[plane].y = y;
-
- return plane_info->width * plane_info->height;
-}
-
-static int
-intel_fill_fb_info(struct drm_i915_private *dev_priv,
- struct drm_framebuffer *fb)
-{
- struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- struct drm_i915_gem_object *obj = intel_fb_obj(fb);
- u32 gtt_offset_rotated = 0;
- unsigned int max_size = 0;
- int i, num_planes = fb->format->num_planes;
- unsigned int tile_size = intel_tile_size(dev_priv);
-
- for (i = 0; i < num_planes; i++) {
- unsigned int width, height;
- unsigned int cpp, size;
- u32 offset;
- int x, y;
- int ret;
-
- /*
- * Plane 2 of Render Compression with Clear Color fb modifier
- * is consumed by the driver and not passed to DE. Skip the
- * arithmetic related to alignment and offset calculation.
- */
- if (is_gen12_ccs_cc_plane(fb, i)) {
- if (IS_ALIGNED(fb->offsets[i], PAGE_SIZE))
- continue;
- else
- return -EINVAL;
- }
-
- cpp = fb->format->cpp[i];
- intel_fb_plane_dims(&width, &height, fb, i);
-
- ret = intel_fb_offset_to_xy(&x, &y, fb, i);
- if (ret) {
- drm_dbg_kms(&dev_priv->drm,
- "bad fb plane %d offset: 0x%x\n",
- i, fb->offsets[i]);
- return ret;
- }
-
- ret = intel_fb_check_ccs_xy(fb, i, x, y);
- if (ret)
- return ret;
-
- /*
- * The fence (if used) is aligned to the start of the object
- * so having the framebuffer wrap around across the edge of the
- * fenced region doesn't really work. We have no API to configure
- * the fence start offset within the object (nor could we probably
- * on gen2/3). So it's just easier if we just require that the
- * fb layout agrees with the fence layout. We already check that the
- * fb stride matches the fence stride elsewhere.
- */
- if (i == 0 && i915_gem_object_is_tiled(obj) &&
- (x + width) * cpp > fb->pitches[i]) {
- drm_dbg_kms(&dev_priv->drm,
- "bad fb plane %d offset: 0x%x\n",
- i, fb->offsets[i]);
- return -EINVAL;
- }
-
- /*
- * First pixel of the framebuffer from
- * the start of the normal gtt mapping.
- */
- intel_fb->normal[i].x = x;
- intel_fb->normal[i].y = y;
-
- offset = intel_compute_aligned_offset(dev_priv, &x, &y, fb, i,
- fb->pitches[i],
- DRM_MODE_ROTATE_0,
- tile_size);
- offset /= tile_size;
-
- if (!is_surface_linear(fb, i)) {
- struct intel_remapped_plane_info plane_info;
- unsigned int tile_width, tile_height;
-
- intel_tile_dims(fb, i, &tile_width, &tile_height);
-
- plane_info.offset = offset;
- plane_info.stride = DIV_ROUND_UP(fb->pitches[i],
- tile_width * cpp);
- plane_info.width = DIV_ROUND_UP(x + width, tile_width);
- plane_info.height = DIV_ROUND_UP(y + height,
- tile_height);
-
- /* how many tiles does this plane need */
- size = plane_info.stride * plane_info.height;
- /*
- * If the plane isn't horizontally tile aligned,
- * we need one more tile.
- */
- if (x != 0)
- size++;
-
- gtt_offset_rotated +=
- setup_fb_rotation(i, &plane_info,
- gtt_offset_rotated,
- x, y, width, height,
- tile_size,
- tile_width, tile_height,
- fb);
- } else {
- size = DIV_ROUND_UP((y + height) * fb->pitches[i] +
- x * cpp, tile_size);
- }
-
- /* how many tiles in total needed in the bo */
- max_size = max(max_size, offset + size);
- }
-
- if (mul_u32_u32(max_size, tile_size) > obj->base.size) {
- drm_dbg_kms(&dev_priv->drm,
- "fb too big for bo (need %llu bytes, have %zu bytes)\n",
- mul_u32_u32(max_size, tile_size), obj->base.size);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void
-intel_plane_remap_gtt(struct intel_plane_state *plane_state)
-{
- struct drm_i915_private *dev_priv =
- to_i915(plane_state->uapi.plane->dev);
- struct drm_framebuffer *fb = plane_state->hw.fb;
- struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- struct intel_rotation_info *info = &plane_state->view.rotated;
- unsigned int rotation = plane_state->hw.rotation;
- int i, num_planes = fb->format->num_planes;
- unsigned int tile_size = intel_tile_size(dev_priv);
- unsigned int src_x, src_y;
- unsigned int src_w, src_h;
- u32 gtt_offset = 0;
-
- memset(&plane_state->view, 0, sizeof(plane_state->view));
- plane_state->view.type = drm_rotation_90_or_270(rotation) ?
- I915_GGTT_VIEW_ROTATED : I915_GGTT_VIEW_REMAPPED;
-
- src_x = plane_state->uapi.src.x1 >> 16;
- src_y = plane_state->uapi.src.y1 >> 16;
- src_w = drm_rect_width(&plane_state->uapi.src) >> 16;
- src_h = drm_rect_height(&plane_state->uapi.src) >> 16;
-
- drm_WARN_ON(&dev_priv->drm, is_ccs_modifier(fb->modifier));
-
- /* Make src coordinates relative to the viewport */
- drm_rect_translate(&plane_state->uapi.src,
- -(src_x << 16), -(src_y << 16));
-
- /* Rotate src coordinates to match rotated GTT view */
- if (drm_rotation_90_or_270(rotation))
- drm_rect_rotate(&plane_state->uapi.src,
- src_w << 16, src_h << 16,
- DRM_MODE_ROTATE_270);
-
- for (i = 0; i < num_planes; i++) {
- unsigned int hsub = i ? fb->format->hsub : 1;
- unsigned int vsub = i ? fb->format->vsub : 1;
- unsigned int cpp = fb->format->cpp[i];
- unsigned int tile_width, tile_height;
- unsigned int width, height;
- unsigned int pitch_tiles;
- unsigned int x, y;
- u32 offset;
-
- intel_tile_dims(fb, i, &tile_width, &tile_height);
-
- x = src_x / hsub;
- y = src_y / vsub;
- width = src_w / hsub;
- height = src_h / vsub;
-
- /*
- * First pixel of the src viewport from the
- * start of the normal gtt mapping.
- */
- x += intel_fb->normal[i].x;
- y += intel_fb->normal[i].y;
-
- offset = intel_compute_aligned_offset(dev_priv, &x, &y,
- fb, i, fb->pitches[i],
- DRM_MODE_ROTATE_0, tile_size);
- offset /= tile_size;
-
- drm_WARN_ON(&dev_priv->drm, i >= ARRAY_SIZE(info->plane));
- info->plane[i].offset = offset;
- info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i],
- tile_width * cpp);
- info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
- info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);
-
- if (drm_rotation_90_or_270(rotation)) {
- struct drm_rect r;
-
- /* rotate the x/y offsets to match the GTT view */
- drm_rect_init(&r, x, y, width, height);
- drm_rect_rotate(&r,
- info->plane[i].width * tile_width,
- info->plane[i].height * tile_height,
- DRM_MODE_ROTATE_270);
- x = r.x1;
- y = r.y1;
-
- pitch_tiles = info->plane[i].height;
- plane_state->color_plane[i].stride = pitch_tiles * tile_height;
-
- /* rotate the tile dimensions to match the GTT view */
- swap(tile_width, tile_height);
- } else {
- pitch_tiles = info->plane[i].width;
- plane_state->color_plane[i].stride = pitch_tiles * tile_width * cpp;
- }
-
- /*
- * We only keep the x/y offsets, so push all of the
- * gtt offset into the x/y offsets.
- */
- intel_adjust_tile_offset(&x, &y,
- tile_width, tile_height,
- tile_size, pitch_tiles,
- gtt_offset * tile_size, 0);
-
- gtt_offset += info->plane[i].width * info->plane[i].height;
-
- plane_state->color_plane[i].offset = 0;
- plane_state->color_plane[i].x = x;
- plane_state->color_plane[i].y = y;
- }
-}
-
-int
-intel_plane_compute_gtt(struct intel_plane_state *plane_state)
-{
- const struct intel_framebuffer *fb =
- to_intel_framebuffer(plane_state->hw.fb);
- unsigned int rotation = plane_state->hw.rotation;
- int i, num_planes;
-
- if (!fb)
- return 0;
-
- num_planes = fb->base.format->num_planes;
-
- if (intel_plane_needs_remap(plane_state)) {
- intel_plane_remap_gtt(plane_state);
-
- /*
- * Sometimes even remapping can't overcome
- * the stride limitations :( Can happen with
- * big plane sizes and suitably misaligned
- * offsets.
- */
- return intel_plane_check_stride(plane_state);
- }
-
- intel_fill_fb_ggtt_view(&plane_state->view, &fb->base, rotation);
-
- for (i = 0; i < num_planes; i++) {
- plane_state->color_plane[i].stride = intel_fb_pitch(&fb->base, i, rotation);
- plane_state->color_plane[i].offset = 0;
-
- if (drm_rotation_90_or_270(rotation)) {
- plane_state->color_plane[i].x = fb->rotated[i].x;
- plane_state->color_plane[i].y = fb->rotated[i].y;
- } else {
- plane_state->color_plane[i].x = fb->normal[i].x;
- plane_state->color_plane[i].y = fb->normal[i].y;
- }
- }
-
- /* Rotate src coordinates to match rotated GTT view */
- if (drm_rotation_90_or_270(rotation))
- drm_rect_rotate(&plane_state->uapi.src,
- fb->base.width << 16, fb->base.height << 16,
- DRM_MODE_ROTATE_270);
-
- return intel_plane_check_stride(plane_state);
-}
-
static struct i915_vma *
initial_plane_vma(struct drm_i915_private *i915,
struct intel_initial_plane_config *plane_config)
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index 32ef99c09efc..5a87080bdbfa 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -515,7 +515,6 @@ void intel_link_compute_m_n(u16 bpp, int nlanes,
void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
u32 pixel_format, u64 modifier);
-bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
enum drm_mode_status
intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
const struct drm_display_mode *mode,
@@ -627,31 +626,15 @@ bool
intel_format_info_is_yuv_semiplanar(const struct drm_format_info *info,
u64 modifier);
-int intel_plane_compute_gtt(struct intel_plane_state *plane_state);
-u32 intel_plane_compute_aligned_offset(int *x, int *y,
- const struct intel_plane_state *state,
- int color_plane);
int intel_plane_pin_fb(struct intel_plane_state *plane_state);
void intel_plane_unpin_fb(struct intel_plane_state *old_plane_state);
struct intel_encoder *
intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
const struct intel_crtc_state *crtc_state);
-u32 intel_plane_adjust_aligned_offset(int *x, int *y,
- const struct intel_plane_state *state,
- int color_plane,
- u32 old_offset, u32 new_offset);
unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
int color_plane);
-void intel_fb_plane_get_subsampling(int *hsub, int *vsub,
- const struct drm_framebuffer *fb,
- int color_plane);
-u32 intel_plane_adjust_aligned_offset(int *x, int *y,
- const struct intel_plane_state *state,
- int color_plane,
- u32 old_offset, u32 new_offset);
unsigned int intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane);
-unsigned int intel_tile_height(const struct drm_framebuffer *fb, int color_plane);
void intel_display_driver_register(struct drm_i915_private *i915);
void intel_display_driver_unregister(struct drm_i915_private *i915);
diff --git a/drivers/gpu/drm/i915/display/intel_fb.c b/drivers/gpu/drm/i915/display/intel_fb.c
index 8ebcded6a472..f0efff22c145 100644
--- a/drivers/gpu/drm/i915/display/intel_fb.c
+++ b/drivers/gpu/drm/i915/display/intel_fb.c
@@ -5,6 +5,7 @@
#include <drm/drm_framebuffer.h>
+#include "display/intel_display.h"
#include "display/intel_display_types.h"
#include "display/intel_fb.h"
@@ -27,6 +28,20 @@ bool is_gen12_ccs_cc_plane(const struct drm_framebuffer *fb, int plane)
plane == 2;
}
+bool is_aux_plane(const struct drm_framebuffer *fb, int plane)
+{
+ if (is_ccs_modifier(fb->modifier))
+ return is_ccs_plane(fb, plane);
+
+ return plane == 1;
+}
+
+bool is_semiplanar_uv_plane(const struct drm_framebuffer *fb, int color_plane)
+{
+ return intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier) &&
+ color_plane == 1;
+}
+
bool is_surface_linear(const struct drm_framebuffer *fb, int color_plane)
{
return fb->modifier == DRM_FORMAT_MOD_LINEAR ||
@@ -65,6 +80,750 @@ int skl_main_to_aux_plane(const struct drm_framebuffer *fb, int main_plane)
return 0;
}
+unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
+{
+ return IS_GEN(dev_priv, 2) ? 2048 : 4096;
+}
+
+unsigned int intel_tile_height(const struct drm_framebuffer *fb, int color_plane)
+{
+ if (is_gen12_ccs_plane(fb, color_plane))
+ return 1;
+
+ return intel_tile_size(to_i915(fb->dev)) /
+ intel_tile_width_bytes(fb, color_plane);
+}
+
+/* Return the tile dimensions in pixel units */
+static void intel_tile_dims(const struct drm_framebuffer *fb, int color_plane,
+ unsigned int *tile_width,
+ unsigned int *tile_height)
+{
+ unsigned int tile_width_bytes = intel_tile_width_bytes(fb, color_plane);
+ unsigned int cpp = fb->format->cpp[color_plane];
+
+ *tile_width = tile_width_bytes / cpp;
+ *tile_height = intel_tile_height(fb, color_plane);
+}
+
+unsigned int intel_tile_row_size(const struct drm_framebuffer *fb, int color_plane)
+{
+ unsigned int tile_width, tile_height;
+
+ intel_tile_dims(fb, color_plane, &tile_width, &tile_height);
+
+ return fb->pitches[color_plane] * tile_height;
+}
+
+unsigned int intel_cursor_alignment(const struct drm_i915_private *dev_priv)
+{
+ if (IS_I830(dev_priv))
+ return 16 * 1024;
+ else if (IS_I85X(dev_priv))
+ return 256;
+ else if (IS_I845G(dev_priv) || IS_I865G(dev_priv))
+ return 32;
+ else
+ return 4 * 1024;
+}
+
+void intel_fb_plane_get_subsampling(int *hsub, int *vsub,
+ const struct drm_framebuffer *fb,
+ int color_plane)
+{
+ int main_plane;
+
+ if (color_plane == 0) {
+ *hsub = 1;
+ *vsub = 1;
+
+ return;
+ }
+
+ /*
+ * TODO: Deduct the subsampling from the char block for all CCS
+ * formats and planes.
+ */
+ if (!is_gen12_ccs_plane(fb, color_plane)) {
+ *hsub = fb->format->hsub;
+ *vsub = fb->format->vsub;
+
+ return;
+ }
+
+ main_plane = skl_ccs_to_main_plane(fb, color_plane);
+ *hsub = drm_format_info_block_width(fb->format, color_plane) /
+ drm_format_info_block_width(fb->format, main_plane);
+
+ /*
+ * The min stride check in the core framebuffer_check() function
+ * assumes that format->hsub applies to every plane except for the
+ * first plane. That's incorrect for the CCS AUX plane of the first
+ * plane, but for the above check to pass we must define the block
+ * width with that subsampling applied to it. Adjust the width here
+ * accordingly, so we can calculate the actual subsampling factor.
+ */
+ if (main_plane == 0)
+ *hsub *= fb->format->hsub;
+
+ *vsub = 32;
+}
+
+static void intel_fb_plane_dims(int *w, int *h, struct drm_framebuffer *fb, int color_plane)
+{
+ int main_plane = is_ccs_plane(fb, color_plane) ?
+ skl_ccs_to_main_plane(fb, color_plane) : 0;
+ int main_hsub, main_vsub;
+ int hsub, vsub;
+
+ intel_fb_plane_get_subsampling(&main_hsub, &main_vsub, fb, main_plane);
+ intel_fb_plane_get_subsampling(&hsub, &vsub, fb, color_plane);
+ *w = fb->width / main_hsub / hsub;
+ *h = fb->height / main_vsub / vsub;
+}
+
+static u32 intel_adjust_tile_offset(int *x, int *y,
+ unsigned int tile_width,
+ unsigned int tile_height,
+ unsigned int tile_size,
+ unsigned int pitch_tiles,
+ u32 old_offset,
+ u32 new_offset)
+{
+ unsigned int pitch_pixels = pitch_tiles * tile_width;
+ unsigned int tiles;
+
+ WARN_ON(old_offset & (tile_size - 1));
+ WARN_ON(new_offset & (tile_size - 1));
+ WARN_ON(new_offset > old_offset);
+
+ tiles = (old_offset - new_offset) / tile_size;
+
+ *y += tiles / pitch_tiles * tile_height;
+ *x += tiles % pitch_tiles * tile_width;
+
+ /* minimize x in case it got needlessly big */
+ *y += *x / pitch_pixels * tile_height;
+ *x %= pitch_pixels;
+
+ return new_offset;
+}
+
+static u32 intel_adjust_aligned_offset(int *x, int *y,
+ const struct drm_framebuffer *fb,
+ int color_plane,
+ unsigned int rotation,
+ unsigned int pitch,
+ u32 old_offset, u32 new_offset)
+{
+ struct drm_i915_private *dev_priv = to_i915(fb->dev);
+ unsigned int cpp = fb->format->cpp[color_plane];
+
+ drm_WARN_ON(&dev_priv->drm, new_offset > old_offset);
+
+ if (!is_surface_linear(fb, color_plane)) {
+ unsigned int tile_size, tile_width, tile_height;
+ unsigned int pitch_tiles;
+
+ tile_size = intel_tile_size(dev_priv);
+ intel_tile_dims(fb, color_plane, &tile_width, &tile_height);
+
+ if (drm_rotation_90_or_270(rotation)) {
+ pitch_tiles = pitch / tile_height;
+ swap(tile_width, tile_height);
+ } else {
+ pitch_tiles = pitch / (tile_width * cpp);
+ }
+
+ intel_adjust_tile_offset(x, y, tile_width, tile_height,
+ tile_size, pitch_tiles,
+ old_offset, new_offset);
+ } else {
+ old_offset += *y * pitch + *x * cpp;
+
+ *y = (old_offset - new_offset) / pitch;
+ *x = ((old_offset - new_offset) - *y * pitch) / cpp;
+ }
+
+ return new_offset;
+}
+
+/*
+ * Adjust the tile offset by moving the difference into
+ * the x/y offsets.
+ */
+u32 intel_plane_adjust_aligned_offset(int *x, int *y,
+ const struct intel_plane_state *state,
+ int color_plane,
+ u32 old_offset, u32 new_offset)
+{
+ return intel_adjust_aligned_offset(x, y, state->hw.fb, color_plane,
+ state->hw.rotation,
+ state->color_plane[color_plane].stride,
+ old_offset, new_offset);
+}
+
+/*
+ * Computes the aligned offset to the base tile and adjusts
+ * x, y. bytes per pixel is assumed to be a power-of-two.
+ *
+ * In the 90/270 rotated case, x and y are assumed
+ * to be already rotated to match the rotated GTT view, and
+ * pitch is the tile_height aligned framebuffer height.
+ *
+ * This function is used when computing the derived information
+ * under intel_framebuffer, so using any of that information
+ * here is not allowed. Anything under drm_framebuffer can be
+ * used. This is why the user has to pass in the pitch since it
+ * is specified in the rotated orientation.
+ */
+static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv,
+ int *x, int *y,
+ const struct drm_framebuffer *fb,
+ int color_plane,
+ unsigned int pitch,
+ unsigned int rotation,
+ u32 alignment)
+{
+ unsigned int cpp = fb->format->cpp[color_plane];
+ u32 offset, offset_aligned;
+
+ if (!is_surface_linear(fb, color_plane)) {
+ unsigned int tile_size, tile_width, tile_height;
+ unsigned int tile_rows, tiles, pitch_tiles;
+
+ tile_size = intel_tile_size(dev_priv);
+ intel_tile_dims(fb, color_plane, &tile_width, &tile_height);
+
+ if (drm_rotation_90_or_270(rotation)) {
+ pitch_tiles = pitch / tile_height;
+ swap(tile_width, tile_height);
+ } else {
+ pitch_tiles = pitch / (tile_width * cpp);
+ }
+
+ tile_rows = *y / tile_height;
+ *y %= tile_height;
+
+ tiles = *x / tile_width;
+ *x %= tile_width;
+
+ offset = (tile_rows * pitch_tiles + tiles) * tile_size;
+
+ offset_aligned = offset;
+ if (alignment)
+ offset_aligned = rounddown(offset_aligned, alignment);
+
+ intel_adjust_tile_offset(x, y, tile_width, tile_height,
+ tile_size, pitch_tiles,
+ offset, offset_aligned);
+ } else {
+ offset = *y * pitch + *x * cpp;
+ offset_aligned = offset;
+ if (alignment) {
+ offset_aligned = rounddown(offset_aligned, alignment);
+ *y = (offset % alignment) / pitch;
+ *x = ((offset % alignment) - *y * pitch) / cpp;
+ } else {
+ *y = *x = 0;
+ }
+ }
+
+ return offset_aligned;
+}
+
+u32 intel_plane_compute_aligned_offset(int *x, int *y,
+ const struct intel_plane_state *state,
+ int color_plane)
+{
+ struct intel_plane *intel_plane = to_intel_plane(state->uapi.plane);
+ struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev);
+ const struct drm_framebuffer *fb = state->hw.fb;
+ unsigned int rotation = state->hw.rotation;
+ int pitch = state->color_plane[color_plane].stride;
+ u32 alignment;
+
+ if (intel_plane->id == PLANE_CURSOR)
+ alignment = intel_cursor_alignment(dev_priv);
+ else
+ alignment = intel_surf_alignment(fb, color_plane);
+
+ return intel_compute_aligned_offset(dev_priv, x, y, fb, color_plane,
+ pitch, rotation, alignment);
+}
+
+/* Convert the fb->offset[] into x/y offsets */
+static int intel_fb_offset_to_xy(int *x, int *y,
+ const struct drm_framebuffer *fb,
+ int color_plane)
+{
+ struct drm_i915_private *dev_priv = to_i915(fb->dev);
+ unsigned int height;
+ u32 alignment;
+
+ if (INTEL_GEN(dev_priv) >= 12 &&
+ is_semiplanar_uv_plane(fb, color_plane))
+ alignment = intel_tile_row_size(fb, color_plane);
+ else if (fb->modifier != DRM_FORMAT_MOD_LINEAR)
+ alignment = intel_tile_size(dev_priv);
+ else
+ alignment = 0;
+
+ if (alignment != 0 && fb->offsets[color_plane] % alignment) {
+ drm_dbg_kms(&dev_priv->drm,
+ "Misaligned offset 0x%08x for color plane %d\n",
+ fb->offsets[color_plane], color_plane);
+ return -EINVAL;
+ }
+
+ height = drm_framebuffer_plane_height(fb->height, fb, color_plane);
+ height = ALIGN(height, intel_tile_height(fb, color_plane));
+
+ /* Catch potential overflows early */
+ if (add_overflows_t(u32, mul_u32_u32(height, fb->pitches[color_plane]),
+ fb->offsets[color_plane])) {
+ drm_dbg_kms(&dev_priv->drm,
+ "Bad offset 0x%08x or pitch %d for color plane %d\n",
+ fb->offsets[color_plane], fb->pitches[color_plane],
+ color_plane);
+ return -ERANGE;
+ }
+
+ *x = 0;
+ *y = 0;
+
+ intel_adjust_aligned_offset(x, y,
+ fb, color_plane, DRM_MODE_ROTATE_0,
+ fb->pitches[color_plane],
+ fb->offsets[color_plane], 0);
+
+ return 0;
+}
+
+static int intel_fb_check_ccs_xy(struct drm_framebuffer *fb, int ccs_plane, int x, int y)
+{
+ struct drm_i915_private *i915 = to_i915(fb->dev);
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ int main_plane;
+ int hsub, vsub;
+ int tile_width, tile_height;
+ int ccs_x, ccs_y;
+ int main_x, main_y;
+
+ if (!is_ccs_plane(fb, ccs_plane) || is_gen12_ccs_cc_plane(fb, ccs_plane))
+ return 0;
+
+ intel_tile_dims(fb, ccs_plane, &tile_width, &tile_height);
+ intel_fb_plane_get_subsampling(&hsub, &vsub, fb, ccs_plane);
+
+ tile_width *= hsub;
+ tile_height *= vsub;
+
+ ccs_x = (x * hsub) % tile_width;
+ ccs_y = (y * vsub) % tile_height;
+
+ main_plane = skl_ccs_to_main_plane(fb, ccs_plane);
+ main_x = intel_fb->normal[main_plane].x % tile_width;
+ main_y = intel_fb->normal[main_plane].y % tile_height;
+
+ /*
+ * CCS doesn't have its own x/y offset register, so the intra CCS tile
+ * x/y offsets must match between CCS and the main surface.
+ */
+ if (main_x != ccs_x || main_y != ccs_y) {
+ drm_dbg_kms(&i915->drm,
+ "Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n",
+ main_x, main_y,
+ ccs_x, ccs_y,
+ intel_fb->normal[main_plane].x,
+ intel_fb->normal[main_plane].y,
+ x, y);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static bool intel_plane_can_remap(const struct intel_plane_state *plane_state)
+{
+ struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+ const struct drm_framebuffer *fb = plane_state->hw.fb;
+ int i;
+
+ /* We don't want to deal with remapping with cursors */
+ if (plane->id == PLANE_CURSOR)
+ return false;
+
+ /*
+ * The display engine limits already match/exceed the
+ * render engine limits, so not much point in remapping.
+ * Would also need to deal with the fence POT alignment
+ * and gen2 2KiB GTT tile size.
+ */
+ if (INTEL_GEN(dev_priv) < 4)
+ return false;
+
+ /*
+ * The new CCS hash mode isn't compatible with remapping as
+ * the virtual address of the pages affects the compressed data.
+ */
+ if (is_ccs_modifier(fb->modifier))
+ return false;
+
+ /* Linear needs a page aligned stride for remapping */
+ if (fb->modifier == DRM_FORMAT_MOD_LINEAR) {
+ unsigned int alignment = intel_tile_size(dev_priv) - 1;
+
+ for (i = 0; i < fb->format->num_planes; i++) {
+ if (fb->pitches[i] & alignment)
+ return false;
+ }
+ }
+
+ return true;
+}
+
+int intel_fb_pitch(const struct drm_framebuffer *fb, int color_plane, unsigned int rotation)
+{
+ if (drm_rotation_90_or_270(rotation))
+ return to_intel_framebuffer(fb)->rotated[color_plane].pitch;
+ else
+ return fb->pitches[color_plane];
+}
+
+static bool intel_plane_needs_remap(const struct intel_plane_state *plane_state)
+{
+ struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
+ const struct drm_framebuffer *fb = plane_state->hw.fb;
+ unsigned int rotation = plane_state->hw.rotation;
+ u32 stride, max_stride;
+
+ /*
+ * No remapping for invisible planes since we don't have
+ * an actual source viewport to remap.
+ */
+ if (!plane_state->uapi.visible)
+ return false;
+
+ if (!intel_plane_can_remap(plane_state))
+ return false;
+
+ /*
+ * FIXME: aux plane limits on gen9+ are
+ * unclear in Bspec, for now no checking.
+ */
+ stride = intel_fb_pitch(fb, 0, rotation);
+ max_stride = plane->max_stride(plane, fb->format->format,
+ fb->modifier, rotation);
+
+ return stride > max_stride;
+}
+
+/*
+ * Setup the rotated view for an FB plane and return the size the GTT mapping
+ * requires for this view.
+ */
+static u32 setup_fb_rotation(int plane, const struct intel_remapped_plane_info *plane_info,
+ u32 gtt_offset_rotated, int x, int y,
+ unsigned int width, unsigned int height,
+ unsigned int tile_size,
+ unsigned int tile_width, unsigned int tile_height,
+ struct drm_framebuffer *fb)
+{
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct intel_rotation_info *rot_info = &intel_fb->rot_info;
+ unsigned int pitch_tiles;
+ struct drm_rect r;
+
+ /* Y or Yf modifiers required for 90/270 rotation */
+ if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
+ fb->modifier != I915_FORMAT_MOD_Yf_TILED)
+ return 0;
+
+ if (drm_WARN_ON(fb->dev, plane >= ARRAY_SIZE(rot_info->plane)))
+ return 0;
+
+ rot_info->plane[plane] = *plane_info;
+
+ intel_fb->rotated[plane].pitch = plane_info->height * tile_height;
+
+ /* rotate the x/y offsets to match the GTT view */
+ drm_rect_init(&r, x, y, width, height);
+ drm_rect_rotate(&r,
+ plane_info->width * tile_width,
+ plane_info->height * tile_height,
+ DRM_MODE_ROTATE_270);
+ x = r.x1;
+ y = r.y1;
+
+ /* rotate the tile dimensions to match the GTT view */
+ pitch_tiles = intel_fb->rotated[plane].pitch / tile_height;
+ swap(tile_width, tile_height);
+
+ /*
+ * We only keep the x/y offsets, so push all of the
+ * gtt offset into the x/y offsets.
+ */
+ intel_adjust_tile_offset(&x, &y,
+ tile_width, tile_height,
+ tile_size, pitch_tiles,
+ gtt_offset_rotated * tile_size, 0);
+
+ /*
+ * First pixel of the framebuffer from
+ * the start of the rotated gtt mapping.
+ */
+ intel_fb->rotated[plane].x = x;
+ intel_fb->rotated[plane].y = y;
+
+ return plane_info->width * plane_info->height;
+}
+
+int intel_fill_fb_info(struct drm_i915_private *dev_priv, struct drm_framebuffer *fb)
+{
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+ u32 gtt_offset_rotated = 0;
+ unsigned int max_size = 0;
+ int i, num_planes = fb->format->num_planes;
+ unsigned int tile_size = intel_tile_size(dev_priv);
+
+ for (i = 0; i < num_planes; i++) {
+ unsigned int width, height;
+ unsigned int cpp, size;
+ u32 offset;
+ int x, y;
+ int ret;
+
+ /*
+ * Plane 2 of Render Compression with Clear Color fb modifier
+ * is consumed by the driver and not passed to DE. Skip the
+ * arithmetic related to alignment and offset calculation.
+ */
+ if (is_gen12_ccs_cc_plane(fb, i)) {
+ if (IS_ALIGNED(fb->offsets[i], PAGE_SIZE))
+ continue;
+ else
+ return -EINVAL;
+ }
+
+ cpp = fb->format->cpp[i];
+ intel_fb_plane_dims(&width, &height, fb, i);
+
+ ret = intel_fb_offset_to_xy(&x, &y, fb, i);
+ if (ret) {
+ drm_dbg_kms(&dev_priv->drm,
+ "bad fb plane %d offset: 0x%x\n",
+ i, fb->offsets[i]);
+ return ret;
+ }
+
+ ret = intel_fb_check_ccs_xy(fb, i, x, y);
+ if (ret)
+ return ret;
+
+ /*
+ * The fence (if used) is aligned to the start of the object
+ * so having the framebuffer wrap around across the edge of the
+ * fenced region doesn't really work. We have no API to configure
+ * the fence start offset within the object (nor could we probably
+ * on gen2/3). So it's just easier if we just require that the
+ * fb layout agrees with the fence layout. We already check that the
+ * fb stride matches the fence stride elsewhere.
+ */
+ if (i == 0 && i915_gem_object_is_tiled(obj) &&
+ (x + width) * cpp > fb->pitches[i]) {
+ drm_dbg_kms(&dev_priv->drm,
+ "bad fb plane %d offset: 0x%x\n",
+ i, fb->offsets[i]);
+ return -EINVAL;
+ }
+
+ /*
+ * First pixel of the framebuffer from
+ * the start of the normal gtt mapping.
+ */
+ intel_fb->normal[i].x = x;
+ intel_fb->normal[i].y = y;
+
+ offset = intel_compute_aligned_offset(dev_priv, &x, &y, fb, i,
+ fb->pitches[i],
+ DRM_MODE_ROTATE_0,
+ tile_size);
+ offset /= tile_size;
+
+ if (!is_surface_linear(fb, i)) {
+ struct intel_remapped_plane_info plane_info;
+ unsigned int tile_width, tile_height;
+
+ intel_tile_dims(fb, i, &tile_width, &tile_height);
+
+ plane_info.offset = offset;
+ plane_info.stride = DIV_ROUND_UP(fb->pitches[i],
+ tile_width * cpp);
+ plane_info.width = DIV_ROUND_UP(x + width, tile_width);
+ plane_info.height = DIV_ROUND_UP(y + height,
+ tile_height);
+
+ /* how many tiles does this plane need */
+ size = plane_info.stride * plane_info.height;
+ /*
+ * If the plane isn't horizontally tile aligned,
+ * we need one more tile.
+ */
+ if (x != 0)
+ size++;
+
+ gtt_offset_rotated +=
+ setup_fb_rotation(i, &plane_info,
+ gtt_offset_rotated,
+ x, y, width, height,
+ tile_size,
+ tile_width, tile_height,
+ fb);
+ } else {
+ size = DIV_ROUND_UP((y + height) * fb->pitches[i] +
+ x * cpp, tile_size);
+ }
+
+ /* how many tiles in total needed in the bo */
+ max_size = max(max_size, offset + size);
+ }
+
+ if (mul_u32_u32(max_size, tile_size) > obj->base.size) {
+ drm_dbg_kms(&dev_priv->drm,
+ "fb too big for bo (need %llu bytes, have %zu bytes)\n",
+ mul_u32_u32(max_size, tile_size), obj->base.size);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void intel_plane_remap_gtt(struct intel_plane_state *plane_state)
+{
+ struct drm_i915_private *dev_priv =
+ to_i915(plane_state->uapi.plane->dev);
+ struct drm_framebuffer *fb = plane_state->hw.fb;
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct intel_rotation_info *info = &plane_state->view.rotated;
+ unsigned int rotation = plane_state->hw.rotation;
+ int i, num_planes = fb->format->num_planes;
+ unsigned int tile_size = intel_tile_size(dev_priv);
+ unsigned int src_x, src_y;
+ unsigned int src_w, src_h;
+ u32 gtt_offset = 0;
+
+ memset(&plane_state->view, 0, sizeof(plane_state->view));
+ plane_state->view.type = drm_rotation_90_or_270(rotation) ?
+ I915_GGTT_VIEW_ROTATED : I915_GGTT_VIEW_REMAPPED;
+
+ src_x = plane_state->uapi.src.x1 >> 16;
+ src_y = plane_state->uapi.src.y1 >> 16;
+ src_w = drm_rect_width(&plane_state->uapi.src) >> 16;
+ src_h = drm_rect_height(&plane_state->uapi.src) >> 16;
+
+ drm_WARN_ON(&dev_priv->drm, is_ccs_modifier(fb->modifier));
+
+ /* Make src coordinates relative to the viewport */
+ drm_rect_translate(&plane_state->uapi.src,
+ -(src_x << 16), -(src_y << 16));
+
+ /* Rotate src coordinates to match rotated GTT view */
+ if (drm_rotation_90_or_270(rotation))
+ drm_rect_rotate(&plane_state->uapi.src,
+ src_w << 16, src_h << 16,
+ DRM_MODE_ROTATE_270);
+
+ for (i = 0; i < num_planes; i++) {
+ unsigned int hsub = i ? fb->format->hsub : 1;
+ unsigned int vsub = i ? fb->format->vsub : 1;
+ unsigned int cpp = fb->format->cpp[i];
+ unsigned int tile_width, tile_height;
+ unsigned int width, height;
+ unsigned int pitch_tiles;
+ unsigned int x, y;
+ u32 offset;
+
+ intel_tile_dims(fb, i, &tile_width, &tile_height);
+
+ x = src_x / hsub;
+ y = src_y / vsub;
+ width = src_w / hsub;
+ height = src_h / vsub;
+
+ /*
+ * First pixel of the src viewport from the
+ * start of the normal gtt mapping.
+ */
+ x += intel_fb->normal[i].x;
+ y += intel_fb->normal[i].y;
+
+ offset = intel_compute_aligned_offset(dev_priv, &x, &y,
+ fb, i, fb->pitches[i],
+ DRM_MODE_ROTATE_0, tile_size);
+ offset /= tile_size;
+
+ drm_WARN_ON(&dev_priv->drm, i >= ARRAY_SIZE(info->plane));
+ info->plane[i].offset = offset;
+ info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i],
+ tile_width * cpp);
+ info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
+ info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);
+
+ if (drm_rotation_90_or_270(rotation)) {
+ struct drm_rect r;
+
+ /* rotate the x/y offsets to match the GTT view */
+ drm_rect_init(&r, x, y, width, height);
+ drm_rect_rotate(&r,
+ info->plane[i].width * tile_width,
+ info->plane[i].height * tile_height,
+ DRM_MODE_ROTATE_270);
+ x = r.x1;
+ y = r.y1;
+
+ pitch_tiles = info->plane[i].height;
+ plane_state->color_plane[i].stride = pitch_tiles * tile_height;
+
+ /* rotate the tile dimensions to match the GTT view */
+ swap(tile_width, tile_height);
+ } else {
+ pitch_tiles = info->plane[i].width;
+ plane_state->color_plane[i].stride = pitch_tiles * tile_width * cpp;
+ }
+
+ /*
+ * We only keep the x/y offsets, so push all of the
+ * gtt offset into the x/y offsets.
+ */
+ intel_adjust_tile_offset(&x, &y,
+ tile_width, tile_height,
+ tile_size, pitch_tiles,
+ gtt_offset * tile_size, 0);
+
+ gtt_offset += info->plane[i].width * info->plane[i].height;
+
+ plane_state->color_plane[i].offset = 0;
+ plane_state->color_plane[i].x = x;
+ plane_state->color_plane[i].y = y;
+ }
+}
+
+void intel_fill_fb_ggtt_view(struct i915_ggtt_view *view,
+ const struct drm_framebuffer *fb,
+ unsigned int rotation)
+{
+ memset(view, 0, sizeof(*view));
+
+ view->type = I915_GGTT_VIEW_NORMAL;
+ if (drm_rotation_90_or_270(rotation)) {
+ view->type = I915_GGTT_VIEW_ROTATED;
+ view->rotated = to_intel_framebuffer(fb)->rot_info;
+ }
+}
+
int intel_plane_check_stride(const struct intel_plane_state *plane_state)
{
struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
@@ -96,3 +855,51 @@ int intel_plane_check_stride(const struct intel_plane_state *plane_state)
return 0;
}
+
+int intel_plane_compute_gtt(struct intel_plane_state *plane_state)
+{
+ const struct intel_framebuffer *fb =
+ to_intel_framebuffer(plane_state->hw.fb);
+ unsigned int rotation = plane_state->hw.rotation;
+ int i, num_planes;
+
+ if (!fb)
+ return 0;
+
+ num_planes = fb->base.format->num_planes;
+
+ if (intel_plane_needs_remap(plane_state)) {
+ intel_plane_remap_gtt(plane_state);
+
+ /*
+ * Sometimes even remapping can't overcome
+ * the stride limitations :( Can happen with
+ * big plane sizes and suitably misaligned
+ * offsets.
+ */
+ return intel_plane_check_stride(plane_state);
+ }
+
+ intel_fill_fb_ggtt_view(&plane_state->view, &fb->base, rotation);
+
+ for (i = 0; i < num_planes; i++) {
+ plane_state->color_plane[i].stride = intel_fb_pitch(&fb->base, i, rotation);
+ plane_state->color_plane[i].offset = 0;
+
+ if (drm_rotation_90_or_270(rotation)) {
+ plane_state->color_plane[i].x = fb->rotated[i].x;
+ plane_state->color_plane[i].y = fb->rotated[i].y;
+ } else {
+ plane_state->color_plane[i].x = fb->normal[i].x;
+ plane_state->color_plane[i].y = fb->normal[i].y;
+ }
+ }
+
+ /* Rotate src coordinates to match rotated GTT view */
+ if (drm_rotation_90_or_270(rotation))
+ drm_rect_rotate(&plane_state->uapi.src,
+ fb->base.width << 16, fb->base.height << 16,
+ DRM_MODE_ROTATE_270);
+
+ return intel_plane_check_stride(plane_state);
+}
diff --git a/drivers/gpu/drm/i915/display/intel_fb.h b/drivers/gpu/drm/i915/display/intel_fb.h
index 8c15f4c9561b..59f8715e0bda 100644
--- a/drivers/gpu/drm/i915/display/intel_fb.h
+++ b/drivers/gpu/drm/i915/display/intel_fb.h
@@ -10,11 +10,17 @@
struct drm_framebuffer;
+struct drm_i915_private;
+
+struct i915_ggtt_view;
+
struct intel_plane_state;
bool is_ccs_plane(const struct drm_framebuffer *fb, int plane);
bool is_gen12_ccs_plane(const struct drm_framebuffer *fb, int plane);
bool is_gen12_ccs_cc_plane(const struct drm_framebuffer *fb, int plane);
+bool is_aux_plane(const struct drm_framebuffer *fb, int plane);
+bool is_semiplanar_uv_plane(const struct drm_framebuffer *fb, int color_plane);
bool is_surface_linear(const struct drm_framebuffer *fb, int color_plane);
@@ -24,4 +30,29 @@ int skl_main_to_aux_plane(const struct drm_framebuffer *fb, int main_plane);
int intel_plane_check_stride(const struct intel_plane_state *plane_state);
+unsigned int intel_tile_size(const struct drm_i915_private *dev_priv);
+unsigned int intel_tile_height(const struct drm_framebuffer *fb, int color_plane);
+unsigned int intel_tile_row_size(const struct drm_framebuffer *fb, int color_plane);
+
+unsigned int intel_cursor_alignment(const struct drm_i915_private *dev_priv);
+
+void intel_fb_plane_get_subsampling(int *hsub, int *vsub,
+ const struct drm_framebuffer *fb,
+ int color_plane);
+
+u32 intel_plane_adjust_aligned_offset(int *x, int *y,
+ const struct intel_plane_state *state,
+ int color_plane,
+ u32 old_offset, u32 new_offset);
+u32 intel_plane_compute_aligned_offset(int *x, int *y,
+ const struct intel_plane_state *state,
+ int color_plane);
+
+int intel_fb_pitch(const struct drm_framebuffer *fb, int color_plane, unsigned int rotation);
+
+int intel_fill_fb_info(struct drm_i915_private *dev_priv, struct drm_framebuffer *fb);
+void intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, const struct drm_framebuffer *fb,
+ unsigned int rotation);
+int intel_plane_compute_gtt(struct intel_plane_state *plane_state);
+
#endif /* __INTEL_FB_H__ */
--
2.25.1
More information about the Intel-gfx
mailing list