[Intel-gfx] [PATCH 1/2] drm/i915/hdcp: Add DP HDCP2.2 timeout to read entire msg
Gupta, Anshuman
anshuman.gupta at intel.com
Wed Mar 24 10:07:07 UTC 2021
> -----Original Message-----
> From: Nautiyal, Ankit K <ankit.k.nautiyal at intel.com>
> Sent: Wednesday, March 24, 2021 3:06 PM
> To: Gupta, Anshuman <anshuman.gupta at intel.com>; intel-
> gfx at lists.freedesktop.org
> Subject: Re: [Intel-gfx] [PATCH 1/2] drm/i915/hdcp: Add DP HDCP2.2 timeout to
> read entire msg
>
> Hi Anshuman,
>
> Changes look good to me as per the Errata.
>
> There are minor comments, inline:
Thanks for review, I will address your comment but just need to clarified one thing as below
>
> On 1/27/2021 1:54 PM, Anshuman Gupta wrote:
> > As documented in HDCP 2.2 DP Errata spec transmitter should abort the
> > authentication protocol in case transmitter has not received the
> > entire {AKE_Send_Cert, AKE_Send_H_prime, AKE_Send_Paring_Info} msg
> > within {110,7,5} miliseconds.
> >
> > Adding above msg timeout values and aborting the HDCP authentication
> > in case it timedout to read entire msg.
> >
> > https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_
> > Errata_v3_0.pdf
> >
> > Cc: Ramalingam C <ramalingam.c at intel.com>
> > Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 56 +++++++++++++-------
> > include/drm/drm_hdcp.h | 3 ++
> > 2 files changed, 40 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> > b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> > index f372e25edab4..f7cc5cbcabc6 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> > @@ -292,39 +292,42 @@ struct hdcp2_dp_msg_data {
> > u8 msg_id;
> > u32 offset;
> > bool msg_detectable;
> > + bool msg_can_timedout;
>
> Perhaps we can just check if msg_read_timedout is not 0 , instead of adding
> bool msg_can_timedout.
>
>
> > u32 timeout;
> > u32 timeout2; /* Added for non_paired situation */
> > + /* Timeout to read entire msg */
> > + u32 msg_read_timeout;
> > };
> >
> > static const struct hdcp2_dp_msg_data hdcp2_dp_msg_data[] = {
> > - { HDCP_2_2_AKE_INIT, DP_HDCP_2_2_AKE_INIT_OFFSET, false, 0, 0 },
> > + { HDCP_2_2_AKE_INIT, DP_HDCP_2_2_AKE_INIT_OFFSET, false, false,
> 0, 0, 0},
> > { HDCP_2_2_AKE_SEND_CERT,
> DP_HDCP_2_2_AKE_SEND_CERT_OFFSET,
> > - false, HDCP_2_2_CERT_TIMEOUT_MS, 0 },
> > + false, true, HDCP_2_2_CERT_TIMEOUT_MS, 0,
> HDCP_2_2_DP_CERT_READ_TIMEOUT_MS},
> > { HDCP_2_2_AKE_NO_STORED_KM,
> DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET,
> > - false, 0, 0 },
> > + false, false, 0, 0, 0 },
> > { HDCP_2_2_AKE_STORED_KM,
> DP_HDCP_2_2_AKE_STORED_KM_OFFSET,
> > - false, 0, 0 },
> > + false, false, 0, 0, 0 },
> > { HDCP_2_2_AKE_SEND_HPRIME,
> DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET,
> > - true, HDCP_2_2_HPRIME_PAIRED_TIMEOUT_MS,
> > - HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT_MS },
> > + true, true, HDCP_2_2_HPRIME_PAIRED_TIMEOUT_MS,
> > + HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT_MS,
> HDCP_2_2_DP_HPRIME_READ_TIMEOUT_MS},
> > { HDCP_2_2_AKE_SEND_PAIRING_INFO,
> > - DP_HDCP_2_2_AKE_SEND_PAIRING_INFO_OFFSET, true,
> > - HDCP_2_2_PAIRING_TIMEOUT_MS, 0 },
> > - { HDCP_2_2_LC_INIT, DP_HDCP_2_2_LC_INIT_OFFSET, false, 0, 0 },
> > + DP_HDCP_2_2_AKE_SEND_PAIRING_INFO_OFFSET, true, true,
> > + HDCP_2_2_PAIRING_TIMEOUT_MS, 0,
> HDCP_2_2_DP_PAIRING_READ_TIMEOUT_MS },
> > + { HDCP_2_2_LC_INIT, DP_HDCP_2_2_LC_INIT_OFFSET, false, false, 0, 0,
> 0 },
> > { HDCP_2_2_LC_SEND_LPRIME,
> DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET,
> > - false, HDCP_2_2_DP_LPRIME_TIMEOUT_MS, 0 },
> > - { HDCP_2_2_SKE_SEND_EKS, DP_HDCP_2_2_SKE_SEND_EKS_OFFSET,
> false,
> > - 0, 0 },
> > + false, false, HDCP_2_2_DP_LPRIME_TIMEOUT_MS, 0, 0 },
> > + { HDCP_2_2_SKE_SEND_EKS, DP_HDCP_2_2_SKE_SEND_EKS_OFFSET,
> false, false,
> > + 0, 0, 0 },
> > { HDCP_2_2_REP_SEND_RECVID_LIST,
> > - DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET, true,
> > - HDCP_2_2_RECVID_LIST_TIMEOUT_MS, 0 },
> > - { HDCP_2_2_REP_SEND_ACK, DP_HDCP_2_2_REP_SEND_ACK_OFFSET,
> false,
> > - 0, 0 },
> > + DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET, true, false,
> > + HDCP_2_2_RECVID_LIST_TIMEOUT_MS, 0, 0 },
> > + { HDCP_2_2_REP_SEND_ACK, DP_HDCP_2_2_REP_SEND_ACK_OFFSET,
> false, false,
> > + 0, 0, 0 },
> > { HDCP_2_2_REP_STREAM_MANAGE,
> > - DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET, false,
> > - 0, 0 },
> > + DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET, false, false,
> > + 0, 0, 0},
> > { HDCP_2_2_REP_STREAM_READY,
> DP_HDCP_2_2_REP_STREAM_READY_OFFSET,
> > - false, HDCP_2_2_STREAM_READY_TIMEOUT_MS, 0 },
> > + false, false, HDCP_2_2_STREAM_READY_TIMEOUT_MS, 0, 0 },
> > /* local define to shovel this through the write_2_2 interface */
> > #define HDCP_2_2_ERRATA_DP_STREAM_TYPE 50
> > { HDCP_2_2_ERRATA_DP_STREAM_TYPE,
> > @@ -513,6 +516,8 @@ int intel_dp_hdcp2_read_msg(struct intel_digital_port
> *dig_port,
> > u8 *byte = buf;
> > ssize_t ret, bytes_to_recv, len;
> > const struct hdcp2_dp_msg_data *hdcp2_msg_data;
> > + ktime_t msg_end;
> > + bool msg_expired;
> >
> > hdcp2_msg_data = get_hdcp2_dp_msg_data(msg_id);
> > if (!hdcp2_msg_data)
> > @@ -539,6 +544,11 @@ int intel_dp_hdcp2_read_msg(struct
> intel_digital_port *dig_port,
> > len = bytes_to_recv > DP_AUX_MAX_PAYLOAD_BYTES ?
> > DP_AUX_MAX_PAYLOAD_BYTES : bytes_to_recv;
> >
> > + /* Entire msg read timeout since initiate of msg read */
> > + if (bytes_to_recv == size - 1)
>
>
> IMHO, we can add the check if msg_read_timeout > 0, so as to skip for
> messages that do not have timeout requirement.
Above condition is to tick the timeout only when msg is initiated.
Sometimes we can only send DP_AUX_MAX_PAYLOAD_BYTES at a time.
So we can't add msg_read_timeout > 0 here, that will be true in case of
We are sending more then DP_AUX_MAX_PAYLOAD_BYTES Over link.
Br,
Anshuman.
>
>
> > + msg_end = ktime_add_ms(ktime_get_raw(),
> > + hdcp2_msg_data-
> >msg_read_timeout);
> > +
> > ret = drm_dp_dpcd_read(&dig_port->dp.aux, offset,
> > (void *)byte, len);
> > if (ret < 0) {
> > @@ -551,6 +561,14 @@ int intel_dp_hdcp2_read_msg(struct
> intel_digital_port *dig_port,
> > byte += ret;
> > offset += ret;
> > }
> > +
> > + msg_expired = ktime_after(ktime_get_raw(), msg_end);
> > + if (msg_expired && hdcp2_msg_data->msg_can_timedout) {
>
> As mentioned before, we can use msg_read_timeout here.
>
>
> Regards,
>
> Ankit
>
> > + drm_dbg_kms(&i915->drm, "msg_id %d, entire msg read
> timeout(mSec): %d\n",
> > + msg_id, hdcp2_msg_data->msg_read_timeout);
> > + return -ETIMEDOUT;
> > + }
> > +
> > byte = buf;
> > *byte = msg_id;
> >
> > diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h
> > index ac22c246542a..2b165a0f434f 100644
> > --- a/include/drm/drm_hdcp.h
> > +++ b/include/drm/drm_hdcp.h
> > @@ -224,9 +224,12 @@ struct hdcp2_rep_stream_ready {
> >
> > /* HDCP2.2 TIMEOUTs in mSec */
> > #define HDCP_2_2_CERT_TIMEOUT_MS 100
> > +#define HDCP_2_2_DP_CERT_READ_TIMEOUT_MS 110
> > #define HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT_MS 1000
> > #define HDCP_2_2_HPRIME_PAIRED_TIMEOUT_MS 200
> > +#define HDCP_2_2_DP_HPRIME_READ_TIMEOUT_MS 7
> > #define HDCP_2_2_PAIRING_TIMEOUT_MS 200
> > +#define HDCP_2_2_DP_PAIRING_READ_TIMEOUT_MS 5
> > #define HDCP_2_2_HDMI_LPRIME_TIMEOUT_MS 20
> > #define HDCP_2_2_DP_LPRIME_TIMEOUT_MS 7
> > #define HDCP_2_2_RECVID_LIST_TIMEOUT_MS 3000
More information about the Intel-gfx
mailing list