[Intel-gfx] [RFC PATCH 20/97] drm/i915/guc: Introduce unified HXG messages

Matthew Brost matthew.brost at intel.com
Thu May 6 19:13:34 UTC 2021


From: Michal Wajdeczko <michal.wajdeczko at intel.com>

New GuC firmware will unify format of MMIO and CTB H2G messages.
Introduce their definitions now to allow gradual transition of
our code to match new changes.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko at intel.com>
Signed-off-by: Matthew Brost <matthew.brost at intel.com>
Cc: Michał Winiarski <michal.winiarski at intel.com>
---
 .../gpu/drm/i915/gt/uc/abi/guc_messages_abi.h | 226 ++++++++++++++++++
 1 file changed, 226 insertions(+)

diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
index 775e21f3058c..1c264819aa03 100644
--- a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
@@ -6,6 +6,232 @@
 #ifndef _ABI_GUC_MESSAGES_ABI_H
 #define _ABI_GUC_MESSAGES_ABI_H
 
+/**
+ * DOC: HXG Message
+ *
+ * All messages exchanged with GuC are defined using 32 bit dwords.
+ * First dword is treated as a message header. Remaining dwords are optional.
+ *
+ * .. _HXG Message:
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  |   |       |                                                              |
+ *  | 0 |    31 | **ORIGIN** - originator of the message                       |
+ *  |   |       |   - _`GUC_HXG_ORIGIN_HOST` = 0                               |
+ *  |   |       |   - _`GUC_HXG_ORIGIN_GUC` = 1                                |
+ *  |   |       |                                                              |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | **TYPE** - message type                                      |
+ *  |   |       |   - _`GUC_HXG_TYPE_REQUEST` = 0                              |
+ *  |   |       |   - _`GUC_HXG_TYPE_EVENT` = 1                                |
+ *  |   |       |   - _`GUC_HXG_TYPE_NO_RESPONSE_BUSY` = 3                     |
+ *  |   |       |   - _`GUC_HXG_TYPE_NO_RESPONSE_RETRY` = 5                    |
+ *  |   |       |   - _`GUC_HXG_TYPE_RESPONSE_FAILURE` = 6                     |
+ *  |   |       |   - _`GUC_HXG_TYPE_RESPONSE_SUCCESS` = 7                     |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  27:0 | **AUX** - auxiliary data (depends TYPE)                      |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 | optional payload (depends on TYPE)                           |
+ *  +---+-------+                                                              |
+ *  |...|       |                                                              |
+ *  +---+-------+                                                              |
+ *  | n |  31:0 |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_MSG_MIN_LEN			1u
+#define GUC_HXG_MSG_0_ORIGIN			(0x1 << 31)
+#define   GUC_HXG_ORIGIN_HOST			0u
+#define   GUC_HXG_ORIGIN_GUC			1u
+#define GUC_HXG_MSG_0_TYPE			(0x7 << 28)
+#define   GUC_HXG_TYPE_REQUEST			0u
+#define   GUC_HXG_TYPE_EVENT			1u
+#define   GUC_HXG_TYPE_NO_RESPONSE_BUSY		3u
+#define   GUC_HXG_TYPE_NO_RESPONSE_RETRY	5u
+#define   GUC_HXG_TYPE_RESPONSE_FAILURE		6u
+#define   GUC_HXG_TYPE_RESPONSE_SUCCESS		7u
+#define GUC_HXG_MSG_0_AUX			(0xfffffff << 0)
+
+/**
+ * DOC: HXG Request
+ *
+ * The `HXG Request`_ message should be used to initiate synchronous activity
+ * for which confirmation or return data is expected.
+ *
+ * The recipient of this message shall use `HXG Response`_, `HXG Failure`_
+ * or `HXG Retry`_ message as a definite reply, and may use `HXG Busy`_
+ * message as a intermediate reply.
+ *
+ * Format of @DATA0 and all @DATAn fields depends on the @ACTION code.
+ *
+ * _HXG Request:
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_                                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 27:16 | **DATA0** - request data (depends on ACTION)                 |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | **ACTION** - requested action code                           |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 | **DATA1** - optional data (depends on ACTION)                |
+ *  +---+-------+--------------------------------------------------------------+
+ *  |...|       |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | n |  31:0 | **DATAn** - optional data (depends on ACTION)                |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_REQUEST_MSG_MIN_LEN		GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_REQUEST_MSG_0_DATA0		(0xfff << 16)
+#define GUC_HXG_REQUEST_MSG_0_ACTION		(0xffff << 0)
+#define GUC_HXG_REQUEST_MSG_n_DATAn		(0xffffffff << 0)
+
+/**
+ * DOC: HXG Event
+ *
+ * The `HXG Event`_ message should be used to initiate asynchronous activity
+ * that does not involves immediate confirmation nor data.
+ *
+ * Format of @DATA0 and all @DATAn fields depends on the @ACTION code.
+ *
+ * .. _HXG Event:
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_EVENT_                                   |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 27:16 | **DATA0** - event data (depends on ACTION)                   |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | **ACTION** - event action code                               |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 | **DATA1** - optional event data (depends on ACTION)          |
+ *  +---+-------+--------------------------------------------------------------+
+ *  |...|       |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | n |  31:0 | **DATAn** - optional event  data (depends on ACTION)         |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_EVENT_MSG_MIN_LEN		GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_EVENT_MSG_0_DATA0		(0xfff << 16)
+#define GUC_HXG_EVENT_MSG_0_ACTION		(0xffff << 0)
+#define GUC_HXG_EVENT_MSG_n_DATAn		(0xffffffff << 0)
+
+/**
+ * DOC: HXG Busy
+ *
+ * The `HXG Busy`_ message may be used to acknowledge reception of the `HXG Request`_
+ * message if the recipient expects that it processing will be longer than default
+ * timeout.
+ *
+ * The @COUNTER field may be used as a progress indicator.
+ *
+ * .. _HXG Busy:
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_BUSY_                        |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  27:0 | **COUNTER** - progress indicator                             |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_BUSY_MSG_LEN			GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_BUSY_MSG_0_COUNTER		GUC_HXG_MSG_0_AUX
+
+/**
+ * DOC: HXG Retry
+ *
+ * The `HXG Retry`_ message should be used by recipient to indicate that the
+ * `HXG Request`_ message was dropped and it should be resent again.
+ *
+ * The @REASON field may be used to provide additional information.
+ *
+ * .. _HXG Retry:
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_RETRY_                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  27:0 | **REASON** - reason for retry                                |
+ *  |   |       |  - _`GUC_HXG_RETRY_REASON_UNSPECIFIED` = 0                   |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_RETRY_MSG_LEN			GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_RETRY_MSG_0_REASON		GUC_HXG_MSG_0_AUX
+#define   GUC_HXG_RETRY_REASON_UNSPECIFIED	0u
+
+/**
+ * DOC: HXG Failure
+ *
+ * The `HXG Failure`_ message shall be used as a reply to the `HXG Request`_
+ * message that could not be processed due to an error.
+ *
+ * .. _HXG Failure:
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_FAILURE_                        |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 27:16 | **HINT** - additional error hint                             |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  15:0 | **ERROR** - error/result code                                |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_FAILURE_MSG_LEN			GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_FAILURE_MSG_0_HINT		(0xfff << 16)
+#define GUC_HXG_FAILURE_MSG_0_ERROR		(0xffff << 0)
+
+/**
+ * DOC: HXG Response
+ *
+ * The `HXG Response`_ message SHALL be used as a reply to the `HXG Request`_
+ * message that was successfully processed without an error.
+ *
+ * .. _HXG Response:
+ *
+ *  +---+-------+--------------------------------------------------------------+
+ *  |   | Bits  | Description                                                  |
+ *  +===+=======+==============================================================+
+ *  | 0 |    31 | ORIGIN                                                       |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_                        |
+ *  |   +-------+--------------------------------------------------------------+
+ *  |   |  27:0 | **DATA0** - data (depends on ACTION from `HXG Request`_)     |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | 1 |  31:0 | **DATA1** - data (depends on ACTION from `HXG Request`_)     |
+ *  +---+-------+--------------------------------------------------------------+
+ *  |...|       |                                                              |
+ *  +---+-------+--------------------------------------------------------------+
+ *  | n |  31:0 | **DATAn** - data (depends on ACTION from `HXG Request`_)     |
+ *  +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_RESPONSE_MSG_MIN_LEN		GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_RESPONSE_MSG_0_DATA0		GUC_HXG_MSG_0_AUX
+#define GUC_HXG_RESPONSE_MSG_n_DATAn		(0xffffffff << 0)
+
+/* deprecated */
 #define INTEL_GUC_MSG_TYPE_SHIFT	28
 #define INTEL_GUC_MSG_TYPE_MASK		(0xF << INTEL_GUC_MSG_TYPE_SHIFT)
 #define INTEL_GUC_MSG_DATA_SHIFT	16
-- 
2.28.0



More information about the Intel-gfx mailing list