[Intel-gfx] [PATCH v4 12/23] drm/i915: Introduce MBUS relative dbuf offsets

[Lisovskiy, Stanislav]

On Fri, May 14, 2021 at 08:10:24PM -0700, Matt Roper wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> The dbuf slices are going to be split across several MBUS units.
> The actual dbuf programming will use offsets relative to the
> MBUS unit. To accommodate that we shall store the MBUS relative
> offsets into the dbuf_state->ddb[] and crtc_state->plane_ddb*[].
> 
> For crtc_state->wm.skl.ddb however we want to stick to global
> offsets as we use this to sanity check that the ddb allocations
> don't overlap between pipes.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>

> 
> Cc: Clint Taylor <Clinton.A.Taylor at intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Clinton Taylor <Clinton.A.Taylor at intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_pm.c | 40 ++++++++++++++++++++++++++++-----
>  1 file changed, 34 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 411ec468d02a..cbbd966f710e 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -4057,6 +4057,20 @@ skl_ddb_entry_for_slices(struct drm_i915_private *dev_priv, u8 slice_mask,
>  	WARN_ON(ddb->end > INTEL_INFO(dev_priv)->dbuf.size);
>  }
>  
> +static unsigned int mbus_ddb_offset(struct drm_i915_private *i915, u8 slice_mask)
> +{
> +	struct skl_ddb_entry ddb;
> +
> +	if (slice_mask & (BIT(DBUF_S1) | BIT(DBUF_S2)))
> +		slice_mask = BIT(DBUF_S1);
> +	else if (slice_mask & (BIT(DBUF_S3) | BIT(DBUF_S4)))
> +		slice_mask = BIT(DBUF_S3);
> +
> +	skl_ddb_entry_for_slices(i915, slice_mask, &ddb);
> +
> +	return ddb.start;
> +}
> +
>  u32 skl_ddb_dbuf_slice_mask(struct drm_i915_private *dev_priv,
>  			    const struct skl_ddb_entry *entry)
>  {
> @@ -4149,6 +4163,7 @@ skl_crtc_allocate_ddb(struct intel_atomic_state *state, struct intel_crtc *crtc)
>  	struct intel_crtc_state *crtc_state;
>  	struct skl_ddb_entry ddb_slices;
>  	enum pipe pipe = crtc->pipe;
> +	unsigned int mbus_offset;
>  	u32 ddb_range_size;
>  	u32 dbuf_slice_mask;
>  	u32 start, end;
> @@ -4163,6 +4178,7 @@ skl_crtc_allocate_ddb(struct intel_atomic_state *state, struct intel_crtc *crtc)
>  	dbuf_slice_mask = new_dbuf_state->slices[pipe];
>  
>  	skl_ddb_entry_for_slices(dev_priv, dbuf_slice_mask, &ddb_slices);
> +	mbus_offset = mbus_ddb_offset(dev_priv, dbuf_slice_mask);
>  	ddb_range_size = skl_ddb_entry_size(&ddb_slices);
>  
>  	intel_crtc_dbuf_weights(new_dbuf_state, pipe,
> @@ -4171,11 +4187,11 @@ skl_crtc_allocate_ddb(struct intel_atomic_state *state, struct intel_crtc *crtc)
>  	start = ddb_range_size * weight_start / weight_total;
>  	end = ddb_range_size * weight_end / weight_total;
>  
> -	new_dbuf_state->ddb[pipe].start = ddb_slices.start + start;
> -	new_dbuf_state->ddb[pipe].end = ddb_slices.start + end;
> -
> +	new_dbuf_state->ddb[pipe].start = ddb_slices.start - mbus_offset + start;
> +	new_dbuf_state->ddb[pipe].end = ddb_slices.start - mbus_offset + end;
>  out:
> -	if (skl_ddb_entry_equal(&old_dbuf_state->ddb[pipe],
> +	if (old_dbuf_state->slices[pipe] == new_dbuf_state->slices[pipe] &&
> +	    skl_ddb_entry_equal(&old_dbuf_state->ddb[pipe],
>  				&new_dbuf_state->ddb[pipe]))
>  		return 0;
>  
> @@ -4187,7 +4203,12 @@ skl_crtc_allocate_ddb(struct intel_atomic_state *state, struct intel_crtc *crtc)
>  	if (IS_ERR(crtc_state))
>  		return PTR_ERR(crtc_state);
>  
> -	crtc_state->wm.skl.ddb = new_dbuf_state->ddb[pipe];
> +	/*
> +	 * Used for checking overlaps, so we need absolute
> +	 * offsets instead of MBUS relative offsets.
> +	 */
> +	crtc_state->wm.skl.ddb.start = mbus_offset + new_dbuf_state->ddb[pipe].start;
> +	crtc_state->wm.skl.ddb.end = mbus_offset + new_dbuf_state->ddb[pipe].end;
>  
>  	drm_dbg_kms(&dev_priv->drm,
>  		    "[CRTC:%d:%s] dbuf slices 0x%x -> 0x%x, ddb (%d - %d) -> (%d - %d), active pipes 0x%x -> 0x%x\n",
> @@ -6416,6 +6437,7 @@ void skl_wm_get_hw_state(struct drm_i915_private *dev_priv)
>  		struct intel_crtc_state *crtc_state =
>  			to_intel_crtc_state(crtc->base.state);
>  		enum pipe pipe = crtc->pipe;
> +		unsigned int mbus_offset;
>  		enum plane_id plane_id;
>  
>  		skl_pipe_wm_get_hw_state(crtc, &crtc_state->wm.skl.optimal);
> @@ -6441,7 +6463,13 @@ void skl_wm_get_hw_state(struct drm_i915_private *dev_priv)
>  
>  		dbuf_state->weight[pipe] = intel_crtc_ddb_weight(crtc_state);
>  
> -		crtc_state->wm.skl.ddb = dbuf_state->ddb[pipe];
> +		/*
> +		 * Used for checking overlaps, so we need absolute
> +		 * offsets instead of MBUS relative offsets.
> +		 */
> +		mbus_offset = mbus_ddb_offset(dev_priv, dbuf_state->slices[pipe]);
> +		crtc_state->wm.skl.ddb.start = mbus_offset + dbuf_state->ddb[pipe].start;
> +		crtc_state->wm.skl.ddb.end = mbus_offset + dbuf_state->ddb[pipe].end;
>  
>  		drm_dbg_kms(&dev_priv->drm,
>  			    "[CRTC:%d:%s] dbuf slices 0x%x, ddb (%d - %d), active pipes 0x%x\n",
> -- 
> 2.25.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx