[Intel-gfx] [RFC PATCH 31/97] drm/i915/guc: Early initialization of GuC send registers
Matthew Brost
matthew.brost at intel.com
Wed May 26 20:28:46 UTC 2021
On Thu, May 06, 2021 at 12:13:45PM -0700, Matthew Brost wrote:
> From: Michal Wajdeczko <michal.wajdeczko at intel.com>
>
> Base offset and count of the GuC scratch registers, used for
> sending MMIO messages to GuC, can be initialized earlier with
> other GuC members that also depends on platform.
>
> Signed-off-by: Michal Wajdeczko <michal.wajdeczko at intel.com>
> Signed-off-by: Matthew Brost <matthew.brost at intel.com>
> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio at intel.com>
Reviewed-by: Matthew Brost <matthew.brost at intel.com>
> ---
> drivers/gpu/drm/i915/gt/uc/intel_guc.c | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc.c b/drivers/gpu/drm/i915/gt/uc/intel_guc.c
> index 454c8d886499..235c1997f32d 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_guc.c
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc.c
> @@ -60,15 +60,8 @@ void intel_guc_init_send_regs(struct intel_guc *guc)
> enum forcewake_domains fw_domains = 0;
> unsigned int i;
>
> - if (INTEL_GEN(gt->i915) >= 11) {
> - guc->send_regs.base =
> - i915_mmio_reg_offset(GEN11_SOFT_SCRATCH(0));
> - guc->send_regs.count = GEN11_SOFT_SCRATCH_COUNT;
> - } else {
> - guc->send_regs.base = i915_mmio_reg_offset(SOFT_SCRATCH(0));
> - guc->send_regs.count = GUC_MAX_MMIO_MSG_LEN;
> - BUILD_BUG_ON(GUC_MAX_MMIO_MSG_LEN > SOFT_SCRATCH_COUNT);
> - }
> + GEM_BUG_ON(!guc->send_regs.base);
> + GEM_BUG_ON(!guc->send_regs.count);
>
> for (i = 0; i < guc->send_regs.count; i++) {
> fw_domains |= intel_uncore_forcewake_for_reg(gt->uncore,
> @@ -181,11 +174,18 @@ void intel_guc_init_early(struct intel_guc *guc)
> guc->interrupts.reset = gen11_reset_guc_interrupts;
> guc->interrupts.enable = gen11_enable_guc_interrupts;
> guc->interrupts.disable = gen11_disable_guc_interrupts;
> + guc->send_regs.base =
> + i915_mmio_reg_offset(GEN11_SOFT_SCRATCH(0));
> + guc->send_regs.count = GEN11_SOFT_SCRATCH_COUNT;
> +
> } else {
> guc->notify_reg = GUC_SEND_INTERRUPT;
> guc->interrupts.reset = gen9_reset_guc_interrupts;
> guc->interrupts.enable = gen9_enable_guc_interrupts;
> guc->interrupts.disable = gen9_disable_guc_interrupts;
> + guc->send_regs.base = i915_mmio_reg_offset(SOFT_SCRATCH(0));
> + guc->send_regs.count = GUC_MAX_MMIO_MSG_LEN;
> + BUILD_BUG_ON(GUC_MAX_MMIO_MSG_LEN > SOFT_SCRATCH_COUNT);
> }
> }
>
> --
> 2.28.0
>
More information about the Intel-gfx
mailing list