[Intel-gfx] [PATCH v10 03/10] amdgpu: use dyndbg.BITGRPS to control existing pr_debugs

[Jim Cromie]

logger_types.h defines many DC_LOG_*() categorized debug wrappers.
Most of these already use DRM debug API, so are controllable using
drm.debug, but others use a bare pr_debug("$prefix: .."), with 1 of 13
different class-prefixes matching [:uppercase:]

Use DEFINE_DYNAMIC_DEBUG_BITGRPS to create a sysfs location which maps
from bits to these 13 sets of categorized pr_debugs to en/disable.

Makefile adds -DDYNAMIC_DEBUG_MODULE for CONFIG_DYNAMIC_DEBUG_CORE,
otherwise BUILD_BUG_ON triggers (obvious errors on subtle misuse is
better than mysterious ones).

Signed-off-by: Jim Cromie <jim.cromie at gmail.com>
---
 drivers/gpu/drm/amd/amdgpu/Makefile           |  2 +
 .../gpu/drm/amd/display/dc/core/dc_debug.c    | 47 ++++++++++++++++++-
 2 files changed, 48 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile b/drivers/gpu/drm/amd/amdgpu/Makefile
index 653726588956..077342ca803f 100644
--- a/drivers/gpu/drm/amd/amdgpu/Makefile
+++ b/drivers/gpu/drm/amd/amdgpu/Makefile
@@ -38,6 +38,8 @@ ccflags-y := -I$(FULL_AMD_PATH)/include/asic_reg \
 	-I$(FULL_AMD_DISPLAY_PATH)/amdgpu_dm \
 	-I$(FULL_AMD_PATH)/amdkfd
 
+ccflags-$(CONFIG_DYNAMIC_DEBUG_CORE) += -DYNAMIC_DEBUG_MODULE
+
 amdgpu-y := amdgpu_drv.o
 
 # add KMS driver
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_debug.c b/drivers/gpu/drm/amd/display/dc/core/dc_debug.c
index 21be2a684393..e49a755c6a69 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_debug.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_debug.c
@@ -36,8 +36,53 @@
 
 #include "resource.h"
 
-#define DC_LOGGER_INIT(logger)
+#if defined(CONFIG_DRM_USE_DYNAMIC_DEBUG)
+#include <linux/dynamic_debug.h>
+
+unsigned long __debug_dc;
+EXPORT_SYMBOL(__debug_dc);
+
+#define help_(_N, _cat)	"\t  Bit-" #_N "\t" _cat "\n"
+
+#define DC_DYNDBG_BITMAP_DESC(name)					\
+	"Control pr_debugs via /sys/module/amdgpu/parameters/" #name	\
+	", where each bit controls a debug category.\n"			\
+	help_(0, "[SURFACE]:")						\
+	help_(1, "[CURSOR]:")						\
+	help_(2, "[PFLIP]:")						\
+	help_(3, "[VBLANK]:")						\
+	help_(4, "[HW_LINK_TRAINING]:")					\
+	help_(5, "[HW_AUDIO]:")						\
+	help_(6, "[SCALER]:")						\
+	help_(7, "[BIOS]:")						\
+	help_(8, "[BANDWIDTH_CALCS]:")					\
+	help_(9, "[DML]:")						\
+	help_(10, "[IF_TRACE]:")					\
+	help_(11, "[GAMMA]:")						\
+	help_(12, "[SMU_MSG]:")
+
+static struct dyndbg_bitdesc amdgpu_bitmap[] = {
+	[0] = { "[CURSOR]:" },
+	[1] = { "[PFLIP]:" },
+	[2] = { "[VBLANK]:" },
+	[3] = { "[HW_LINK_TRAINING]:" },
+	[4] = { "[HW_AUDIO]:" },
+	[5] = { "[SCALER]:" },
+	[6] = { "[BIOS]:" },
+	[7] = { "[BANDWIDTH_CALCS]:" },
+	[8] = { "[DML]:" },
+	[9] = { "[IF_TRACE]:" },
+	[10] = { "[GAMMA]:" },
+	[11] = { "[SMU_MSG]:" }
+};
+
+DEFINE_DYNAMIC_DEBUG_LOG_GROUPS(debug_dc, __debug_dc,
+				DC_DYNDBG_BITMAP_DESC(debug_dc),
+				amdgpu_bitmap);
+
+#endif
 
+#define DC_LOGGER_INIT(logger)
 
 #define SURFACE_TRACE(...) do {\
 		if (dc->debug.surface_trace) \
-- 
2.31.1