[Intel-gfx] [PATCH v5] drm/i915: Update memory bandwidth formulae
Radhakrishna Sripada
radhakrishna.sripada at intel.com
Fri Oct 1 16:16:26 UTC 2021
The formulae has been updated to include more variables. Make
sure the code carries the same.
Bspec: 64631
v2: Make GEN11 follow the default route and fix calculation of
maxdebw(RK)
v3: Fix div by zero on default case
Correct indent for fallthrough(Jani)
v4: Fix div by zero on gen11.
v5: Fix 0 max_numchannels case
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Suggested-by: Matt Roper <matthew.d.roper at intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
---
drivers/gpu/drm/i915/display/intel_bw.c | 80 ++++++++++++++++++++-----
1 file changed, 65 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
index 4b94256d7319..a3c0a282aaad 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -27,6 +27,9 @@ struct intel_qgv_info {
u8 num_points;
u8 num_psf_points;
u8 t_bl;
+ u8 max_numchannels;
+ u8 channel_width;
+ u8 deinterleave;
};
static int dg1_mchbar_read_qgv_point_info(struct drm_i915_private *dev_priv,
@@ -133,7 +136,8 @@ int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
}
static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
- struct intel_qgv_info *qi)
+ struct intel_qgv_info *qi,
+ bool is_y_tile)
{
const struct dram_info *dram_info = &dev_priv->dram_info;
int i, ret;
@@ -144,17 +148,41 @@ static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
if (DISPLAY_VER(dev_priv) == 12)
switch (dram_info->type) {
case INTEL_DRAM_DDR4:
- qi->t_bl = 4;
+ qi->t_bl = is_y_tile ? 8 : 4;
+ qi->max_numchannels = 2;
+ qi->channel_width = 64;
+ qi->deinterleave = is_y_tile ? 1 : 2;
break;
case INTEL_DRAM_DDR5:
- qi->t_bl = 8;
+ qi->t_bl = is_y_tile ? 16 : 8;
+ qi->max_numchannels = 4;
+ qi->channel_width = 32;
+ qi->deinterleave = is_y_tile ? 1 : 2;
+ break;
+ case INTEL_DRAM_LPDDR4:
+ if (IS_ROCKETLAKE(dev_priv)) {
+ qi->t_bl = 8;
+ qi->max_numchannels = 4;
+ qi->channel_width = 32;
+ qi->deinterleave = 2;
+ break;
+ }
+ fallthrough;
+ case INTEL_DRAM_LPDDR5:
+ qi->t_bl = 16;
+ qi->max_numchannels = 8;
+ qi->channel_width = 16;
+ qi->deinterleave = is_y_tile ? 2 : 4;
break;
default:
qi->t_bl = 16;
+ qi->max_numchannels = 1;
break;
}
- else if (DISPLAY_VER(dev_priv) == 11)
+ else if (DISPLAY_VER(dev_priv) == 11) {
qi->t_bl = dev_priv->dram_info.type == INTEL_DRAM_DDR4 ? 4 : 8;
+ qi->max_numchannels = 1;
+ }
if (drm_WARN_ON(&dev_priv->drm,
qi->num_points > ARRAY_SIZE(qi->points)))
@@ -263,37 +291,59 @@ static const struct intel_sa_info adlp_sa_info = {
static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel_sa_info *sa)
{
struct intel_qgv_info qi = {};
+ const struct dram_info *dram_info = &dev_priv->dram_info;
bool is_y_tile = true; /* assume y tile may be used */
int num_channels = max_t(u8, 1, dev_priv->dram_info.num_channels);
- int deinterleave;
int ipqdepth, ipqdepthpch;
int dclk_max;
- int maxdebw;
+ int maxdebw, peakbw;
+ int clperchgroup;
+ int num_groups = ARRAY_SIZE(dev_priv->max_bw);
int i, ret;
- ret = icl_get_qgv_points(dev_priv, &qi);
+ ret = icl_get_qgv_points(dev_priv, &qi, is_y_tile);
if (ret) {
drm_dbg_kms(&dev_priv->drm,
"Failed to get memory subsystem information, ignoring bandwidth limits");
return ret;
}
- deinterleave = DIV_ROUND_UP(num_channels, is_y_tile ? 4 : 2);
- dclk_max = icl_sagv_max_dclk(&qi);
+ if (dram_info->type == INTEL_DRAM_LPDDR4 || dram_info->type == INTEL_DRAM_LPDDR5)
+ num_channels *= 2;
+
+ qi.deinterleave = qi.deinterleave ? : DIV_ROUND_UP(num_channels, is_y_tile ? 4 : 2);
+
+ if (num_channels < qi.max_numchannels && DISPLAY_VER(dev_priv) >= 12)
+ qi.deinterleave = DIV_ROUND_UP(qi.deinterleave, 2);
+
+ if (qi.max_numchannels != 0)
+ num_channels = min_t(u8, num_channels, qi.max_numchannels);
+
+ dclk_max = icl_calc_bw(icl_sagv_max_dclk(&qi), 16, 1);
ipqdepthpch = 16;
- maxdebw = min(sa->deprogbwlimit * 1000,
- icl_calc_bw(dclk_max, 16, 1) * 6 / 10); /* 60% */
+ peakbw = num_channels * DIV_ROUND_UP(qi.deinterleave, 8) * dclk_max;
+ maxdebw = min(sa->deprogbwlimit * 1000, peakbw * 6 / 10); /* 60% */
ipqdepth = min(ipqdepthpch, sa->displayrtids / num_channels);
+ /*
+ * clperchgroup = 4kpagespermempage * clperchperblock,
+ * clperchperblock = 8 / num_channels * interleave
+ */
+ clperchgroup = 4 * DIV_ROUND_UP(8, num_channels) * qi.deinterleave;
- for (i = 0; i < ARRAY_SIZE(dev_priv->max_bw); i++) {
+ for (i = 0; i < num_groups; i++) {
struct intel_bw_info *bi = &dev_priv->max_bw[i];
int clpchgroup;
int j;
- clpchgroup = (sa->deburst * deinterleave / num_channels) << i;
- bi->num_planes = (ipqdepth - clpchgroup) / clpchgroup + 1;
+ clpchgroup = (sa->deburst * qi.deinterleave / num_channels) << i;
+
+ if ((i < num_groups - 1 && clpchgroup < clperchgroup) ||
+ DISPLAY_VER(dev_priv) == 11)
+ bi->num_planes = (ipqdepth - clpchgroup) / clpchgroup + 1;
+ else
+ bi->num_planes = 0;
bi->num_qgv_points = qi.num_points;
bi->num_psf_gv_points = qi.num_psf_points;
@@ -339,7 +389,7 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel
* SAGV point, but we can't send PCode commands to restrict it
* as it will fail and pointless anyway.
*/
- if (qi.num_points == 1)
+ if (qi.num_points >= 1)
dev_priv->sagv_status = I915_SAGV_NOT_CONTROLLED;
else
dev_priv->sagv_status = I915_SAGV_ENABLED;
--
2.20.1
More information about the Intel-gfx
mailing list