[Intel-gfx] [PATCH 2/9] drm/i915: Move PCH modeset code to its own file
Ville Syrjala
ville.syrjala at linux.intel.com
Fri Oct 15 07:16:18 UTC 2021
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Start moving the code for PCH modeset sequence/etc. to
its own file.
Still not sure about the file name though...
Cc: Dave Airlie <airlied at redhat.com>
Cc: Jani Nikula <jani.nikula at intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/display/intel_crt.c | 1 +
drivers/gpu/drm/i915/display/intel_display.c | 348 +----------------
drivers/gpu/drm/i915/display/intel_display.h | 5 -
.../gpu/drm/i915/display/intel_pch_display.c | 365 ++++++++++++++++++
.../gpu/drm/i915/display/intel_pch_display.h | 22 ++
6 files changed, 390 insertions(+), 352 deletions(-)
create mode 100644 drivers/gpu/drm/i915/display/intel_pch_display.c
create mode 100644 drivers/gpu/drm/i915/display/intel_pch_display.h
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 96f3b8f6c50d..467872cca027 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -226,6 +226,7 @@ i915-y += \
display/intel_hotplug.o \
display/intel_lpe_audio.o \
display/intel_overlay.o \
+ display/intel_pch_display.o \
display/intel_pch_refclk.o \
display/intel_plane_initial.o \
display/intel_psr.o \
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index bf03bd0ecd43..54540138bd1d 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -45,6 +45,7 @@
#include "intel_fifo_underrun.h"
#include "intel_gmbus.h"
#include "intel_hotplug.h"
+#include "intel_pch_display.h"
#include "intel_pch_refclk.h"
/* Here's the desired hotplug mode */
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 995050443065..69549886fe5b 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -96,6 +96,7 @@
#include "intel_hotplug.h"
#include "intel_overlay.h"
#include "intel_panel.h"
+#include "intel_pch_display.h"
#include "intel_pch_refclk.h"
#include "intel_pcode.h"
#include "intel_pipe_crc.h"
@@ -454,80 +455,6 @@ static void assert_planes_disabled(struct intel_crtc *crtc)
assert_plane_disabled(plane);
}
-void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
- enum pipe pipe)
-{
- u32 val;
- bool enabled;
-
- val = intel_de_read(dev_priv, PCH_TRANSCONF(pipe));
- enabled = !!(val & TRANS_ENABLE);
- I915_STATE_WARN(enabled,
- "transcoder assertion failed, should be off on pipe %c but is still active\n",
- pipe_name(pipe));
-}
-
-static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
- enum pipe pipe, enum port port,
- i915_reg_t dp_reg)
-{
- enum pipe port_pipe;
- bool state;
-
- state = g4x_dp_port_enabled(dev_priv, dp_reg, port, &port_pipe);
-
- I915_STATE_WARN(state && port_pipe == pipe,
- "PCH DP %c enabled on transcoder %c, should be disabled\n",
- port_name(port), pipe_name(pipe));
-
- I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && !state && port_pipe == PIPE_B,
- "IBX PCH DP %c still using transcoder B\n",
- port_name(port));
-}
-
-static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
- enum pipe pipe, enum port port,
- i915_reg_t hdmi_reg)
-{
- enum pipe port_pipe;
- bool state;
-
- state = intel_sdvo_port_enabled(dev_priv, hdmi_reg, &port_pipe);
-
- I915_STATE_WARN(state && port_pipe == pipe,
- "PCH HDMI %c enabled on transcoder %c, should be disabled\n",
- port_name(port), pipe_name(pipe));
-
- I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && !state && port_pipe == PIPE_B,
- "IBX PCH HDMI %c still using transcoder B\n",
- port_name(port));
-}
-
-static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
- enum pipe pipe)
-{
- enum pipe port_pipe;
-
- assert_pch_dp_disabled(dev_priv, pipe, PORT_B, PCH_DP_B);
- assert_pch_dp_disabled(dev_priv, pipe, PORT_C, PCH_DP_C);
- assert_pch_dp_disabled(dev_priv, pipe, PORT_D, PCH_DP_D);
-
- I915_STATE_WARN(intel_crt_port_enabled(dev_priv, PCH_ADPA, &port_pipe) &&
- port_pipe == pipe,
- "PCH VGA enabled on transcoder %c, should be disabled\n",
- pipe_name(pipe));
-
- I915_STATE_WARN(intel_lvds_port_enabled(dev_priv, PCH_LVDS, &port_pipe) &&
- port_pipe == pipe,
- "PCH LVDS enabled on transcoder %c, should be disabled\n",
- pipe_name(pipe));
-
- /* PCH SDVOB multiplex with HDMIB */
- assert_pch_hdmi_disabled(dev_priv, pipe, PORT_B, PCH_HDMIB);
- assert_pch_hdmi_disabled(dev_priv, pipe, PORT_C, PCH_HDMIC);
- assert_pch_hdmi_disabled(dev_priv, pipe, PORT_D, PCH_HDMID);
-}
-
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
struct intel_digital_port *dig_port,
unsigned int expected_mask)
@@ -562,154 +489,6 @@ void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
expected_mask);
}
-static void ilk_enable_pch_transcoder(const struct intel_crtc_state *crtc_state)
-{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- enum pipe pipe = crtc->pipe;
- i915_reg_t reg;
- u32 val, pipeconf_val;
-
- /* Make sure PCH DPLL is enabled */
- assert_shared_dpll_enabled(dev_priv, crtc_state->shared_dpll);
-
- /* FDI must be feeding us bits for PCH ports */
- assert_fdi_tx_enabled(dev_priv, pipe);
- assert_fdi_rx_enabled(dev_priv, pipe);
-
- if (HAS_PCH_CPT(dev_priv)) {
- reg = TRANS_CHICKEN2(pipe);
- val = intel_de_read(dev_priv, reg);
- /*
- * Workaround: Set the timing override bit
- * before enabling the pch transcoder.
- */
- val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
- /* Configure frame start delay to match the CPU */
- val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
- val |= TRANS_CHICKEN2_FRAME_START_DELAY(dev_priv->framestart_delay - 1);
- intel_de_write(dev_priv, reg, val);
- }
-
- reg = PCH_TRANSCONF(pipe);
- val = intel_de_read(dev_priv, reg);
- pipeconf_val = intel_de_read(dev_priv, PIPECONF(pipe));
-
- if (HAS_PCH_IBX(dev_priv)) {
- /* Configure frame start delay to match the CPU */
- val &= ~TRANS_FRAME_START_DELAY_MASK;
- val |= TRANS_FRAME_START_DELAY(dev_priv->framestart_delay - 1);
-
- /*
- * Make the BPC in transcoder be consistent with
- * that in pipeconf reg. For HDMI we must use 8bpc
- * here for both 8bpc and 12bpc.
- */
- val &= ~PIPECONF_BPC_MASK;
- if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
- val |= PIPECONF_8BPC;
- else
- val |= pipeconf_val & PIPECONF_BPC_MASK;
- }
-
- val &= ~TRANS_INTERLACE_MASK;
- if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) {
- if (HAS_PCH_IBX(dev_priv) &&
- intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO))
- val |= TRANS_LEGACY_INTERLACED_ILK;
- else
- val |= TRANS_INTERLACED;
- } else {
- val |= TRANS_PROGRESSIVE;
- }
-
- intel_de_write(dev_priv, reg, val | TRANS_ENABLE);
- if (intel_de_wait_for_set(dev_priv, reg, TRANS_STATE_ENABLE, 100))
- drm_err(&dev_priv->drm, "failed to enable transcoder %c\n",
- pipe_name(pipe));
-}
-
-static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
- enum transcoder cpu_transcoder)
-{
- u32 val, pipeconf_val;
-
- /* FDI must be feeding us bits for PCH ports */
- assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
- assert_fdi_rx_enabled(dev_priv, PIPE_A);
-
- val = intel_de_read(dev_priv, TRANS_CHICKEN2(PIPE_A));
- /* Workaround: set timing override bit. */
- val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
- /* Configure frame start delay to match the CPU */
- val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
- val |= TRANS_CHICKEN2_FRAME_START_DELAY(dev_priv->framestart_delay - 1);
- intel_de_write(dev_priv, TRANS_CHICKEN2(PIPE_A), val);
-
- val = TRANS_ENABLE;
- pipeconf_val = intel_de_read(dev_priv, PIPECONF(cpu_transcoder));
-
- if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
- PIPECONF_INTERLACED_ILK)
- val |= TRANS_INTERLACED;
- else
- val |= TRANS_PROGRESSIVE;
-
- intel_de_write(dev_priv, LPT_TRANSCONF, val);
- if (intel_de_wait_for_set(dev_priv, LPT_TRANSCONF,
- TRANS_STATE_ENABLE, 100))
- drm_err(&dev_priv->drm, "Failed to enable PCH transcoder\n");
-}
-
-static void ilk_disable_pch_transcoder(struct drm_i915_private *dev_priv,
- enum pipe pipe)
-{
- i915_reg_t reg;
- u32 val;
-
- /* FDI relies on the transcoder */
- assert_fdi_tx_disabled(dev_priv, pipe);
- assert_fdi_rx_disabled(dev_priv, pipe);
-
- /* Ports must be off as well */
- assert_pch_ports_disabled(dev_priv, pipe);
-
- reg = PCH_TRANSCONF(pipe);
- val = intel_de_read(dev_priv, reg);
- val &= ~TRANS_ENABLE;
- intel_de_write(dev_priv, reg, val);
- /* wait for PCH transcoder off, transcoder state */
- if (intel_de_wait_for_clear(dev_priv, reg, TRANS_STATE_ENABLE, 50))
- drm_err(&dev_priv->drm, "failed to disable transcoder %c\n",
- pipe_name(pipe));
-
- if (HAS_PCH_CPT(dev_priv)) {
- /* Workaround: Clear the timing override chicken bit again. */
- reg = TRANS_CHICKEN2(pipe);
- val = intel_de_read(dev_priv, reg);
- val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
- intel_de_write(dev_priv, reg, val);
- }
-}
-
-void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
-{
- u32 val;
-
- val = intel_de_read(dev_priv, LPT_TRANSCONF);
- val &= ~TRANS_ENABLE;
- intel_de_write(dev_priv, LPT_TRANSCONF, val);
- /* wait for PCH transcoder off, transcoder state */
- if (intel_de_wait_for_clear(dev_priv, LPT_TRANSCONF,
- TRANS_STATE_ENABLE, 50))
- drm_err(&dev_priv->drm, "Failed to disable PCH transcoder\n");
-
- /* Workaround: clear timing override bit. */
- val = intel_de_read(dev_priv, TRANS_CHICKEN2(PIPE_A));
- val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
- intel_de_write(dev_priv, TRANS_CHICKEN2(PIPE_A), val);
-}
-
enum pipe intel_crtc_pch_transcoder(struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
@@ -1388,31 +1167,6 @@ bool intel_has_pending_fb_unpin(struct drm_i915_private *dev_priv)
return false;
}
-
-static void ilk_pch_transcoder_set_timings(const struct intel_crtc_state *crtc_state,
- enum pipe pch_transcoder)
-{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
-
- intel_de_write(dev_priv, PCH_TRANS_HTOTAL(pch_transcoder),
- intel_de_read(dev_priv, HTOTAL(cpu_transcoder)));
- intel_de_write(dev_priv, PCH_TRANS_HBLANK(pch_transcoder),
- intel_de_read(dev_priv, HBLANK(cpu_transcoder)));
- intel_de_write(dev_priv, PCH_TRANS_HSYNC(pch_transcoder),
- intel_de_read(dev_priv, HSYNC(cpu_transcoder)));
-
- intel_de_write(dev_priv, PCH_TRANS_VTOTAL(pch_transcoder),
- intel_de_read(dev_priv, VTOTAL(cpu_transcoder)));
- intel_de_write(dev_priv, PCH_TRANS_VBLANK(pch_transcoder),
- intel_de_read(dev_priv, VBLANK(cpu_transcoder)));
- intel_de_write(dev_priv, PCH_TRANS_VSYNC(pch_transcoder),
- intel_de_read(dev_priv, VSYNC(cpu_transcoder)));
- intel_de_write(dev_priv, PCH_TRANS_VSYNCSHIFT(pch_transcoder),
- intel_de_read(dev_priv, VSYNCSHIFT(cpu_transcoder)));
-}
-
/*
* Finds the encoder associated with the given CRTC. This can only be
* used when we know that the CRTC isn't feeding multiple encoders!
@@ -1443,106 +1197,6 @@ intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
return encoder;
}
-/*
- * Enable PCH resources required for PCH ports:
- * - PCH PLLs
- * - FDI training & RX/TX
- * - update transcoder timings
- * - DP transcoding bits
- * - transcoder
- */
-static void ilk_pch_enable(const struct intel_atomic_state *state,
- const struct intel_crtc_state *crtc_state)
-{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- enum pipe pipe = crtc->pipe;
- u32 temp;
-
- assert_pch_transcoder_disabled(dev_priv, pipe);
-
- /* For PCH output, training FDI link */
- intel_fdi_link_train(crtc, crtc_state);
-
- /* We need to program the right clock selection before writing the pixel
- * mutliplier into the DPLL. */
- if (HAS_PCH_CPT(dev_priv)) {
- u32 sel;
-
- temp = intel_de_read(dev_priv, PCH_DPLL_SEL);
- temp |= TRANS_DPLL_ENABLE(pipe);
- sel = TRANS_DPLLB_SEL(pipe);
- if (crtc_state->shared_dpll ==
- intel_get_shared_dpll_by_id(dev_priv, DPLL_ID_PCH_PLL_B))
- temp |= sel;
- else
- temp &= ~sel;
- intel_de_write(dev_priv, PCH_DPLL_SEL, temp);
- }
-
- /* XXX: pch pll's can be enabled any time before we enable the PCH
- * transcoder, and we actually should do this to not upset any PCH
- * transcoder that already use the clock when we share it.
- *
- * Note that enable_shared_dpll tries to do the right thing, but
- * get_shared_dpll unconditionally resets the pll - we need that to have
- * the right LVDS enable sequence. */
- intel_enable_shared_dpll(crtc_state);
-
- /* set transcoder timing, panel must allow it */
- assert_pps_unlocked(dev_priv, pipe);
- ilk_pch_transcoder_set_timings(crtc_state, pipe);
-
- intel_fdi_normal_train(crtc);
-
- /* For PCH DP, enable TRANS_DP_CTL */
- if (HAS_PCH_CPT(dev_priv) &&
- intel_crtc_has_dp_encoder(crtc_state)) {
- const struct drm_display_mode *adjusted_mode =
- &crtc_state->hw.adjusted_mode;
- u32 bpc = (intel_de_read(dev_priv, PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
- i915_reg_t reg = TRANS_DP_CTL(pipe);
- enum port port;
-
- temp = intel_de_read(dev_priv, reg);
- temp &= ~(TRANS_DP_PORT_SEL_MASK |
- TRANS_DP_SYNC_MASK |
- TRANS_DP_BPC_MASK);
- temp |= TRANS_DP_OUTPUT_ENABLE;
- temp |= bpc << 9; /* same format but at 11:9 */
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
- temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
- temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
-
- port = intel_get_crtc_new_encoder(state, crtc_state)->port;
- drm_WARN_ON(dev, port < PORT_B || port > PORT_D);
- temp |= TRANS_DP_PORT_SEL(port);
-
- intel_de_write(dev_priv, reg, temp);
- }
-
- ilk_enable_pch_transcoder(crtc_state);
-}
-
-void lpt_pch_enable(const struct intel_crtc_state *crtc_state)
-{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
-
- assert_pch_transcoder_disabled(dev_priv, PIPE_A);
-
- lpt_program_iclkip(crtc_state);
-
- /* Set transcoder timing. */
- ilk_pch_transcoder_set_timings(crtc_state, PIPE_A);
-
- lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
-}
-
static void cpt_verify_modeset(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index 39c18b8807f9..93c84f2174b5 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -541,8 +541,6 @@ int vlv_get_cck_clock(struct drm_i915_private *dev_priv,
const char *name, u32 reg, int ref_freq);
int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
const char *name, u32 reg);
-void lpt_pch_enable(const struct intel_crtc_state *crtc_state);
-void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv);
void intel_init_display_hooks(struct drm_i915_private *dev_priv);
unsigned int intel_fb_xy_to_linear(int x, int y,
const struct intel_plane_state *state,
@@ -578,9 +576,6 @@ struct drm_framebuffer *
intel_framebuffer_create(struct drm_i915_gem_object *obj,
struct drm_mode_fb_cmd2 *mode_cmd);
-void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
- enum pipe pipe);
-
bool intel_fuzzy_clock_check(int clock1, int clock2);
void intel_display_prepare_reset(struct drm_i915_private *dev_priv);
diff --git a/drivers/gpu/drm/i915/display/intel_pch_display.c b/drivers/gpu/drm/i915/display/intel_pch_display.c
new file mode 100644
index 000000000000..0056c2fe49ec
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_pch_display.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2021 Intel Corporation
+ */
+
+#include "g4x_dp.h"
+#include "intel_crt.h"
+#include "intel_de.h"
+#include "intel_display_types.h"
+#include "intel_fdi.h"
+#include "intel_lvds.h"
+#include "intel_pch_display.h"
+#include "intel_pch_refclk.h"
+#include "intel_pps.h"
+#include "intel_sdvo.h"
+
+static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, enum port port,
+ i915_reg_t dp_reg)
+{
+ enum pipe port_pipe;
+ bool state;
+
+ state = g4x_dp_port_enabled(dev_priv, dp_reg, port, &port_pipe);
+
+ I915_STATE_WARN(state && port_pipe == pipe,
+ "PCH DP %c enabled on transcoder %c, should be disabled\n",
+ port_name(port), pipe_name(pipe));
+
+ I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && !state && port_pipe == PIPE_B,
+ "IBX PCH DP %c still using transcoder B\n",
+ port_name(port));
+}
+
+static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, enum port port,
+ i915_reg_t hdmi_reg)
+{
+ enum pipe port_pipe;
+ bool state;
+
+ state = intel_sdvo_port_enabled(dev_priv, hdmi_reg, &port_pipe);
+
+ I915_STATE_WARN(state && port_pipe == pipe,
+ "PCH HDMI %c enabled on transcoder %c, should be disabled\n",
+ port_name(port), pipe_name(pipe));
+
+ I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && !state && port_pipe == PIPE_B,
+ "IBX PCH HDMI %c still using transcoder B\n",
+ port_name(port));
+}
+
+static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ enum pipe port_pipe;
+
+ assert_pch_dp_disabled(dev_priv, pipe, PORT_B, PCH_DP_B);
+ assert_pch_dp_disabled(dev_priv, pipe, PORT_C, PCH_DP_C);
+ assert_pch_dp_disabled(dev_priv, pipe, PORT_D, PCH_DP_D);
+
+ I915_STATE_WARN(intel_crt_port_enabled(dev_priv, PCH_ADPA, &port_pipe) &&
+ port_pipe == pipe,
+ "PCH VGA enabled on transcoder %c, should be disabled\n",
+ pipe_name(pipe));
+
+ I915_STATE_WARN(intel_lvds_port_enabled(dev_priv, PCH_LVDS, &port_pipe) &&
+ port_pipe == pipe,
+ "PCH LVDS enabled on transcoder %c, should be disabled\n",
+ pipe_name(pipe));
+
+ /* PCH SDVOB multiplex with HDMIB */
+ assert_pch_hdmi_disabled(dev_priv, pipe, PORT_B, PCH_HDMIB);
+ assert_pch_hdmi_disabled(dev_priv, pipe, PORT_C, PCH_HDMIC);
+ assert_pch_hdmi_disabled(dev_priv, pipe, PORT_D, PCH_HDMID);
+}
+
+static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ u32 val;
+ bool enabled;
+
+ val = intel_de_read(dev_priv, PCH_TRANSCONF(pipe));
+ enabled = !!(val & TRANS_ENABLE);
+ I915_STATE_WARN(enabled,
+ "transcoder assertion failed, should be off on pipe %c but is still active\n",
+ pipe_name(pipe));
+}
+
+static void ilk_pch_transcoder_set_timings(const struct intel_crtc_state *crtc_state,
+ enum pipe pch_transcoder)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+
+ intel_de_write(dev_priv, PCH_TRANS_HTOTAL(pch_transcoder),
+ intel_de_read(dev_priv, HTOTAL(cpu_transcoder)));
+ intel_de_write(dev_priv, PCH_TRANS_HBLANK(pch_transcoder),
+ intel_de_read(dev_priv, HBLANK(cpu_transcoder)));
+ intel_de_write(dev_priv, PCH_TRANS_HSYNC(pch_transcoder),
+ intel_de_read(dev_priv, HSYNC(cpu_transcoder)));
+
+ intel_de_write(dev_priv, PCH_TRANS_VTOTAL(pch_transcoder),
+ intel_de_read(dev_priv, VTOTAL(cpu_transcoder)));
+ intel_de_write(dev_priv, PCH_TRANS_VBLANK(pch_transcoder),
+ intel_de_read(dev_priv, VBLANK(cpu_transcoder)));
+ intel_de_write(dev_priv, PCH_TRANS_VSYNC(pch_transcoder),
+ intel_de_read(dev_priv, VSYNC(cpu_transcoder)));
+ intel_de_write(dev_priv, PCH_TRANS_VSYNCSHIFT(pch_transcoder),
+ intel_de_read(dev_priv, VSYNCSHIFT(cpu_transcoder)));
+}
+
+static void ilk_enable_pch_transcoder(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ enum pipe pipe = crtc->pipe;
+ i915_reg_t reg;
+ u32 val, pipeconf_val;
+
+ /* Make sure PCH DPLL is enabled */
+ assert_shared_dpll_enabled(dev_priv, crtc_state->shared_dpll);
+
+ /* FDI must be feeding us bits for PCH ports */
+ assert_fdi_tx_enabled(dev_priv, pipe);
+ assert_fdi_rx_enabled(dev_priv, pipe);
+
+ if (HAS_PCH_CPT(dev_priv)) {
+ reg = TRANS_CHICKEN2(pipe);
+ val = intel_de_read(dev_priv, reg);
+ /*
+ * Workaround: Set the timing override bit
+ * before enabling the pch transcoder.
+ */
+ val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
+ /* Configure frame start delay to match the CPU */
+ val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
+ val |= TRANS_CHICKEN2_FRAME_START_DELAY(dev_priv->framestart_delay - 1);
+ intel_de_write(dev_priv, reg, val);
+ }
+
+ reg = PCH_TRANSCONF(pipe);
+ val = intel_de_read(dev_priv, reg);
+ pipeconf_val = intel_de_read(dev_priv, PIPECONF(pipe));
+
+ if (HAS_PCH_IBX(dev_priv)) {
+ /* Configure frame start delay to match the CPU */
+ val &= ~TRANS_FRAME_START_DELAY_MASK;
+ val |= TRANS_FRAME_START_DELAY(dev_priv->framestart_delay - 1);
+
+ /*
+ * Make the BPC in transcoder be consistent with
+ * that in pipeconf reg. For HDMI we must use 8bpc
+ * here for both 8bpc and 12bpc.
+ */
+ val &= ~PIPECONF_BPC_MASK;
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
+ val |= PIPECONF_8BPC;
+ else
+ val |= pipeconf_val & PIPECONF_BPC_MASK;
+ }
+
+ val &= ~TRANS_INTERLACE_MASK;
+ if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) {
+ if (HAS_PCH_IBX(dev_priv) &&
+ intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO))
+ val |= TRANS_LEGACY_INTERLACED_ILK;
+ else
+ val |= TRANS_INTERLACED;
+ } else {
+ val |= TRANS_PROGRESSIVE;
+ }
+
+ intel_de_write(dev_priv, reg, val | TRANS_ENABLE);
+ if (intel_de_wait_for_set(dev_priv, reg, TRANS_STATE_ENABLE, 100))
+ drm_err(&dev_priv->drm, "failed to enable transcoder %c\n",
+ pipe_name(pipe));
+}
+
+void ilk_disable_pch_transcoder(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ i915_reg_t reg;
+ u32 val;
+
+ /* FDI relies on the transcoder */
+ assert_fdi_tx_disabled(dev_priv, pipe);
+ assert_fdi_rx_disabled(dev_priv, pipe);
+
+ /* Ports must be off as well */
+ assert_pch_ports_disabled(dev_priv, pipe);
+
+ reg = PCH_TRANSCONF(pipe);
+ val = intel_de_read(dev_priv, reg);
+ val &= ~TRANS_ENABLE;
+ intel_de_write(dev_priv, reg, val);
+ /* wait for PCH transcoder off, transcoder state */
+ if (intel_de_wait_for_clear(dev_priv, reg, TRANS_STATE_ENABLE, 50))
+ drm_err(&dev_priv->drm, "failed to disable transcoder %c\n",
+ pipe_name(pipe));
+
+ if (HAS_PCH_CPT(dev_priv)) {
+ /* Workaround: Clear the timing override chicken bit again. */
+ reg = TRANS_CHICKEN2(pipe);
+ val = intel_de_read(dev_priv, reg);
+ val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
+ intel_de_write(dev_priv, reg, val);
+ }
+}
+
+/*
+ * Enable PCH resources required for PCH ports:
+ * - PCH PLLs
+ * - FDI training & RX/TX
+ * - update transcoder timings
+ * - DP transcoding bits
+ * - transcoder
+ */
+void ilk_pch_enable(const struct intel_atomic_state *state,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ enum pipe pipe = crtc->pipe;
+ u32 temp;
+
+ assert_pch_transcoder_disabled(dev_priv, pipe);
+
+ /* For PCH output, training FDI link */
+ intel_fdi_link_train(crtc, crtc_state);
+
+ /*
+ * We need to program the right clock selection
+ * before writing the pixel multiplier into the DPLL.
+ */
+ if (HAS_PCH_CPT(dev_priv)) {
+ u32 sel;
+
+ temp = intel_de_read(dev_priv, PCH_DPLL_SEL);
+ temp |= TRANS_DPLL_ENABLE(pipe);
+ sel = TRANS_DPLLB_SEL(pipe);
+ if (crtc_state->shared_dpll ==
+ intel_get_shared_dpll_by_id(dev_priv, DPLL_ID_PCH_PLL_B))
+ temp |= sel;
+ else
+ temp &= ~sel;
+ intel_de_write(dev_priv, PCH_DPLL_SEL, temp);
+ }
+
+ /*
+ * XXX: pch pll's can be enabled any time before we enable the PCH
+ * transcoder, and we actually should do this to not upset any PCH
+ * transcoder that already use the clock when we share it.
+ *
+ * Note that enable_shared_dpll tries to do the right thing, but
+ * get_shared_dpll unconditionally resets the pll - we need that
+ * to have the right LVDS enable sequence.
+ */
+ intel_enable_shared_dpll(crtc_state);
+
+ /* set transcoder timing, panel must allow it */
+ assert_pps_unlocked(dev_priv, pipe);
+ ilk_pch_transcoder_set_timings(crtc_state, pipe);
+
+ intel_fdi_normal_train(crtc);
+
+ /* For PCH DP, enable TRANS_DP_CTL */
+ if (HAS_PCH_CPT(dev_priv) &&
+ intel_crtc_has_dp_encoder(crtc_state)) {
+ const struct drm_display_mode *adjusted_mode =
+ &crtc_state->hw.adjusted_mode;
+ u32 bpc = (intel_de_read(dev_priv, PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
+ i915_reg_t reg = TRANS_DP_CTL(pipe);
+ enum port port;
+
+ temp = intel_de_read(dev_priv, reg);
+ temp &= ~(TRANS_DP_PORT_SEL_MASK |
+ TRANS_DP_SYNC_MASK |
+ TRANS_DP_BPC_MASK);
+ temp |= TRANS_DP_OUTPUT_ENABLE;
+ temp |= bpc << 9; /* same format but at 11:9 */
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+ temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+ temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
+
+ port = intel_get_crtc_new_encoder(state, crtc_state)->port;
+ drm_WARN_ON(dev, port < PORT_B || port > PORT_D);
+ temp |= TRANS_DP_PORT_SEL(port);
+
+ intel_de_write(dev_priv, reg, temp);
+ }
+
+ ilk_enable_pch_transcoder(crtc_state);
+}
+
+static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
+ enum transcoder cpu_transcoder)
+{
+ u32 val, pipeconf_val;
+
+ /* FDI must be feeding us bits for PCH ports */
+ assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
+ assert_fdi_rx_enabled(dev_priv, PIPE_A);
+
+ val = intel_de_read(dev_priv, TRANS_CHICKEN2(PIPE_A));
+ /* Workaround: set timing override bit. */
+ val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
+ /* Configure frame start delay to match the CPU */
+ val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
+ val |= TRANS_CHICKEN2_FRAME_START_DELAY(dev_priv->framestart_delay - 1);
+ intel_de_write(dev_priv, TRANS_CHICKEN2(PIPE_A), val);
+
+ val = TRANS_ENABLE;
+ pipeconf_val = intel_de_read(dev_priv, PIPECONF(cpu_transcoder));
+
+ if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
+ PIPECONF_INTERLACED_ILK)
+ val |= TRANS_INTERLACED;
+ else
+ val |= TRANS_PROGRESSIVE;
+
+ intel_de_write(dev_priv, LPT_TRANSCONF, val);
+ if (intel_de_wait_for_set(dev_priv, LPT_TRANSCONF,
+ TRANS_STATE_ENABLE, 100))
+ drm_err(&dev_priv->drm, "Failed to enable PCH transcoder\n");
+}
+
+void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ val = intel_de_read(dev_priv, LPT_TRANSCONF);
+ val &= ~TRANS_ENABLE;
+ intel_de_write(dev_priv, LPT_TRANSCONF, val);
+ /* wait for PCH transcoder off, transcoder state */
+ if (intel_de_wait_for_clear(dev_priv, LPT_TRANSCONF,
+ TRANS_STATE_ENABLE, 50))
+ drm_err(&dev_priv->drm, "Failed to disable PCH transcoder\n");
+
+ /* Workaround: clear timing override bit. */
+ val = intel_de_read(dev_priv, TRANS_CHICKEN2(PIPE_A));
+ val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
+ intel_de_write(dev_priv, TRANS_CHICKEN2(PIPE_A), val);
+}
+
+void lpt_pch_enable(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+
+ assert_pch_transcoder_disabled(dev_priv, PIPE_A);
+
+ lpt_program_iclkip(crtc_state);
+
+ /* Set transcoder timing. */
+ ilk_pch_transcoder_set_timings(crtc_state, PIPE_A);
+
+ lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
+}
diff --git a/drivers/gpu/drm/i915/display/intel_pch_display.h b/drivers/gpu/drm/i915/display/intel_pch_display.h
new file mode 100644
index 000000000000..6eba1fd667ea
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_pch_display.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2021 Intel Corporation
+ */
+
+#ifndef _INTEL_PCH_DISPLAY_H_
+#define _INTEL_PCH_DISPLAY_H_
+
+enum pipe;
+struct drm_i915_private;
+struct intel_atomic_state;
+struct intel_crtc_state;
+
+void ilk_disable_pch_transcoder(struct drm_i915_private *dev_priv,
+ enum pipe pipe);
+void ilk_pch_enable(const struct intel_atomic_state *state,
+ const struct intel_crtc_state *crtc_state);
+
+void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv);
+void lpt_pch_enable(const struct intel_crtc_state *crtc_state);
+
+#endif
--
2.32.0
More information about the Intel-gfx
mailing list