[Intel-gfx] [PATCH 6/9] drm/i915: Move iCLKIP readout to the pch code

Ville Syrjala ville.syrjala at linux.intel.com
Fri Oct 15 07:16:22 UTC 2021


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Move the lpt_get_iclkip() call from hsw_crt_get_config()
since that's where we have the lpt_program_iclkip() call
as well.

Tehcnically this isn't perhaps quite right since iCLKIP
is providing the CRT dotclock. So one can argue all of
it should be directly in intel_crt.c. But since the CRT
port is the only one on the PCH sticking it all into the
PCH code seems OK.

Cc: Dave Airlie <airlied at redhat.com>
Cc: Jani Nikula <jani.nikula at intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_crt.c         | 4 ----
 drivers/gpu/drm/i915/display/intel_ddi.c         | 7 ++++---
 drivers/gpu/drm/i915/display/intel_pch_display.c | 2 ++
 3 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index 03cfae46f92f..fe807c8e793d 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -145,8 +145,6 @@ static void intel_crt_get_config(struct intel_encoder *encoder,
 static void hsw_crt_get_config(struct intel_encoder *encoder,
 			       struct intel_crtc_state *pipe_config)
 {
-	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-
 	lpt_pch_get_config(pipe_config);
 
 	hsw_ddi_get_config(encoder, pipe_config);
@@ -156,8 +154,6 @@ static void hsw_crt_get_config(struct intel_encoder *encoder,
 					      DRM_MODE_FLAG_PVSYNC |
 					      DRM_MODE_FLAG_NVSYNC);
 	pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
-
-	pipe_config->hw.adjusted_mode.crtc_clock = lpt_get_iclkip(dev_priv);
 }
 
 /* Note: The caller is required to filter out dpms modes not supported by the
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 1dcfe31e6c6f..8bbbeec01607 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -321,10 +321,11 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
 {
 	int dotclock;
 
+	/* CRT dotclock is determined via other means */
 	if (pipe_config->has_pch_encoder)
-		dotclock = intel_dotclock_calculate(pipe_config->port_clock,
-						    &pipe_config->fdi_m_n);
-	else if (intel_crtc_has_dp_encoder(pipe_config))
+		return;
+
+	if (intel_crtc_has_dp_encoder(pipe_config))
 		dotclock = intel_dotclock_calculate(pipe_config->port_clock,
 						    &pipe_config->dp_m_n);
 	else if (pipe_config->has_hdmi_sink && pipe_config->pipe_bpp > 24)
diff --git a/drivers/gpu/drm/i915/display/intel_pch_display.c b/drivers/gpu/drm/i915/display/intel_pch_display.c
index f3edabdd0a4c..07ec43f8a7fa 100644
--- a/drivers/gpu/drm/i915/display/intel_pch_display.c
+++ b/drivers/gpu/drm/i915/display/intel_pch_display.c
@@ -451,4 +451,6 @@ void lpt_pch_get_config(struct intel_crtc_state *crtc_state)
 				 FDI_DP_PORT_WIDTH_SHIFT) + 1;
 
 	ilk_get_fdi_m_n_config(crtc, crtc_state);
+
+	crtc_state->hw.adjusted_mode.crtc_clock = lpt_get_iclkip(dev_priv);
 }
-- 
2.32.0



More information about the Intel-gfx mailing list