[Intel-gfx] [PATCH 07/20] drm/i915/hdmi: Simplify intel_hdmi_mode_clock_valid()

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Just loop over the possible bpc values instead of
using an ugly if construct.

A slight change in behaviour is that we now call
intel_hdmi_{source,sink}_bpc_possible() even for 8bpc,
but that is fine since 8bpc is always supported.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_hdmi.c | 37 +++++++++++++----------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index b5af986b2778..c6586d10a9d0 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1934,25 +1934,30 @@ intel_hdmi_mode_clock_valid(struct drm_connector *connector, int clock,
 {
 	struct drm_i915_private *i915 = to_i915(connector->dev);
 	struct intel_hdmi *hdmi = intel_attached_hdmi(to_intel_connector(connector));
-	enum drm_mode_status status;
+	enum drm_mode_status status = MODE_OK;
+	int bpc;
 
-	/* check if we can do 8bpc */
-	status = hdmi_port_clock_valid(hdmi, intel_hdmi_tmds_clock(clock, 8, ycbcr420_output),
-				       true, has_hdmi_sink);
+	/*
+	 * Try all color depths since valid port clock range
+	 * can have holes. Any mode that can be used with at
+	 * least one color depth is accepted.
+	 */
+	for (bpc = 12; bpc >= 8; bpc -= 2) {
+		int tmds_clock = intel_hdmi_tmds_clock(clock, bpc, ycbcr420_output);
 
-	/* if we can't do 8bpc we may still be able to do 12bpc */
-	if (status != MODE_OK &&
-	    intel_hdmi_source_bpc_possible(i915, 12) &&
-	    intel_hdmi_sink_bpc_possible(connector, 12, has_hdmi_sink, ycbcr420_output))
-		status = hdmi_port_clock_valid(hdmi, intel_hdmi_tmds_clock(clock, 12, ycbcr420_output),
-					       true, has_hdmi_sink);
+		if (!intel_hdmi_source_bpc_possible(i915, bpc))
+			continue;
 
-	/* if we can't do 8,12bpc we may still be able to do 10bpc */
-	if (status != MODE_OK &&
-	    intel_hdmi_source_bpc_possible(i915, 10) &&
-	    intel_hdmi_sink_bpc_possible(connector, 10, has_hdmi_sink, ycbcr420_output))
-		status = hdmi_port_clock_valid(hdmi, intel_hdmi_tmds_clock(clock, 10, ycbcr420_output),
-					       true, has_hdmi_sink);
+		if (!intel_hdmi_sink_bpc_possible(connector, bpc, has_hdmi_sink, ycbcr420_output))
+			continue;
+
+		status = hdmi_port_clock_valid(hdmi, tmds_clock, true, has_hdmi_sink);
+		if (status == MODE_OK)
+			return MODE_OK;
+	}
+
+	/* can never happen */
+	drm_WARN_ON(&i915->drm, status == MODE_OK);
 
 	return status;
 }
-- 
2.32.0