[Intel-gfx] [PATCH 4/4] drm/i915/dsi: Ungate clock before enabling the phy

[Jani Nikula]

On Mon, 18 Oct 2021, Vandita Kulkarni <vandita.kulkarni at intel.com> wrote:
> For the PHY enable/disable signalling to propagate
> between Dispaly and PHY, DDI clocks need to be running when
> enabling the PHY.
>

A bspec reference would be useful:

Bspec: NNN 

> Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 8c166f92f8bd..77cd01ecfa80 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1135,8 +1135,6 @@ static void
>  gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
>  			      const struct intel_crtc_state *crtc_state)
>  {
> -	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> -
>  	/* step 4a: power up all lanes of the DDI used by DSI */
>  	gen11_dsi_power_up_lanes(encoder);
>  
> @@ -1146,6 +1144,8 @@ gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
>  	/* step 4c: configure voltage swing and skew */
>  	gen11_dsi_voltage_swing_program_seq(encoder);
>  
> +	gen11_dsi_ungate_clocks(encoder);
> +
>  	/* enable DDI buffer */
>  	gen11_dsi_enable_ddi_buffer(encoder);
>  
> @@ -1161,9 +1161,7 @@ gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
>  	/* Step (4h, 4i, 4j, 4k): Configure transcoder */
>  	gen11_dsi_configure_transcoder(encoder, crtc_state);
>  
> -	/* Step 4l: Gate DDI clocks */
> -	if (DISPLAY_VER(dev_priv) == 11)
> -		gen11_dsi_gate_clocks(encoder);
> +	gen11_dsi_gate_clocks(encoder);

So how does this relate to
991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping")

>  }
>  
>  static void gen11_dsi_powerup_panel(struct intel_encoder *encoder)

-- 
Jani Nikula, Intel Open Source Graphics Center