[Intel-gfx] [PATCH] drm/i915/display: Remove check for low voltage sku for max dp source rate

[Nautiyal, Ankit K]

On 10/26/2021 1:23 PM, Jani Nikula wrote:
> On Tue, 26 Oct 2021, Ankit Nautiyal <ankit.k.nautiyal at intel.com> wrote:
>> The low voltage sku check can be ignored as OEMs need to consider that
>> when designing the board and then put any limits in VBT.
>>
>> Same is now changed in Bspec pages.
>>
>> v2: Added debug print for combo PHY procmon reference values
>> to get voltage configuration of combo PHY ports. (Imre)
> Seems useful, but out of place in *this* patch.

Sent new patch for this, but just realized that have missed the comment 
below *face palm*.

Will update in-reply-to the new patch shortly.

Thanks & Regards,

Ankit

>
>> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
>> ---
>>   .../gpu/drm/i915/display/intel_combo_phy.c    |  4 +++
>>   drivers/gpu/drm/i915/display/intel_dp.c       | 32 ++-----------------
>>   2 files changed, 7 insertions(+), 29 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy.c b/drivers/gpu/drm/i915/display/intel_combo_phy.c
>> index 634e8d449457..01ff86b3ff91 100644
>> --- a/drivers/gpu/drm/i915/display/intel_combo_phy.c
>> +++ b/drivers/gpu/drm/i915/display/intel_combo_phy.c
>> @@ -112,6 +112,10 @@ static bool icl_verify_procmon_ref_values(struct drm_i915_private *dev_priv,
>>   
>>   	procmon = icl_get_procmon_ref_values(dev_priv, phy);
>>   
>> +	drm_dbg(&dev_priv->drm,
> drm_dbg_kms please.
>
> BR,
> Jani.
>
>> +		"Combo PHY %c PROCMON values : 0x%x, 0x%x, 0x%x\n",
>> +		phy_name(phy), procmon->dw1, procmon->dw9, procmon->dw10);
>> +
>>   	ret = check_phy_reg(dev_priv, phy, ICL_PORT_COMP_DW1(phy),
>>   			    (0xff << 16) | 0xff, procmon->dw1);
>>   	ret &= check_phy_reg(dev_priv, phy, ICL_PORT_COMP_DW9(phy),
>> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
>> index f5dc2126d140..693d7e097295 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> @@ -385,23 +385,13 @@ static int dg2_max_source_rate(struct intel_dp *intel_dp)
>>   	return intel_dp_is_edp(intel_dp) ? 810000 : 1350000;
>>   }
>>   
>> -static bool is_low_voltage_sku(struct drm_i915_private *i915, enum phy phy)
>> -{
>> -	u32 voltage;
>> -
>> -	voltage = intel_de_read(i915, ICL_PORT_COMP_DW3(phy)) & VOLTAGE_INFO_MASK;
>> -
>> -	return voltage == VOLTAGE_INFO_0_85V;
>> -}
>> -
>>   static int icl_max_source_rate(struct intel_dp *intel_dp)
>>   {
>>   	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
>>   	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
>>   	enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
>>   
>> -	if (intel_phy_is_combo(dev_priv, phy) &&
>> -	    (is_low_voltage_sku(dev_priv, phy) || !intel_dp_is_edp(intel_dp)))
>> +	if (intel_phy_is_combo(dev_priv, phy) && !intel_dp_is_edp(intel_dp))
>>   		return 540000;
>>   
>>   	return 810000;
>> @@ -409,23 +399,7 @@ static int icl_max_source_rate(struct intel_dp *intel_dp)
>>   
>>   static int ehl_max_source_rate(struct intel_dp *intel_dp)
>>   {
>> -	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
>> -	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
>> -	enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
>> -
>> -	if (intel_dp_is_edp(intel_dp) || is_low_voltage_sku(dev_priv, phy))
>> -		return 540000;
>> -
>> -	return 810000;
>> -}
>> -
>> -static int dg1_max_source_rate(struct intel_dp *intel_dp)
>> -{
>> -	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
>> -	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
>> -	enum phy phy = intel_port_to_phy(i915, dig_port->base.port);
>> -
>> -	if (intel_phy_is_combo(i915, phy) && is_low_voltage_sku(i915, phy))
>> +	if (intel_dp_is_edp(intel_dp))
>>   		return 540000;
>>   
>>   	return 810000;
>> @@ -468,7 +442,7 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
>>   			max_rate = dg2_max_source_rate(intel_dp);
>>   		else if (IS_ALDERLAKE_P(dev_priv) || IS_ALDERLAKE_S(dev_priv) ||
>>   			 IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
>> -			max_rate = dg1_max_source_rate(intel_dp);
>> +			max_rate = 810000;
>>   		else if (IS_JSL_EHL(dev_priv))
>>   			max_rate = ehl_max_source_rate(intel_dp);
>>   		else