[Intel-gfx] [PATCH V4] drm/i915/gen11: Disable cursor clock gating in HDR mode

Ville Syrjälä ville.syrjala at linux.intel.com
Wed Sep 1 13:48:43 UTC 2021


On Tue, Jun 22, 2021 at 03:04:24PM +0530, Tejas Upadhyay wrote:
> Display underrun in HDR mode when cursor is enabled.
> RTL fix will be implemented CLKGATE_DIS_PSL_A bit 28-46520h.
> As per W/A 1604331009, Disable cursor clock gating in HDR mode.
> 
> Bspec : 33451
> 
> Changes since V3:
> 	- Disable WA when not in HDR mode or cursor plane not active - Ville
> 	- Extract required args from crtc_state - Ville
> 	- Create HDR mode API using bdw_set_pipemisc ref - Ville
> 	- Tested with HDR video as well full setmode, WA applies and disables
> Changes since V2:
>         - Made it general gen11 WA
>         - Removed WA needed check
>         - Added cursor plane active check
>         - Once WA enable, software will not disable
> Changes since V1:
>         - Modified way CLKGATE_DIS_PSL bit 28 was modified
> 
> Cc: Souza Jose <jose.souza at intel.com>
> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 27 ++++++++++++++++++++
>  drivers/gpu/drm/i915/i915_reg.h              |  5 ++++
>  2 files changed, 32 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 6be1b31af07b..e1ea03b918df 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -358,6 +358,13 @@ static void intel_update_czclk(struct drm_i915_private *dev_priv)
>  		dev_priv->czclk_freq);
>  }
>  
> +static bool
> +is_hdr_mode(const struct intel_crtc_state *crtc_state)
> +{
> +	return (crtc_state->active_planes & ~(icl_hdr_plane_mask() |
> +		BIT(PLANE_CURSOR))) == 0;
> +}

Please use this in bdw_set_pipemisc() as well. This could be
a separate prep patch actually.

> +
>  /* WA Display #0827: Gen9:all */
>  static void
>  skl_wa_827(struct drm_i915_private *dev_priv, enum pipe pipe, bool enable)
> @@ -383,6 +390,23 @@ icl_wa_scalerclkgating(struct drm_i915_private *dev_priv, enum pipe pipe,
>  		               intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) & ~DPFR_GATING_DIS);
>  }
>  
> +/* Wa_1604331009:icl,jsl,ehl */
> +	static void
> +icl_wa_cursorclkgating(const struct intel_crtc_state *crtc_state)
> +{
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +
> +	if (is_hdr_mode(crtc_state) &&
> +	    crtc_state->active_planes & BIT(PLANE_CURSOR) &&
> +	    IS_GEN(dev_priv, 11))
> +		intel_de_rmw(dev_priv, CLKGATE_DIS_PSL(crtc->pipe),
> +			     CURSOR_GATING_DIS, CURSOR_GATING_DIS);
> +	else
> +		intel_de_rmw(dev_priv, CLKGATE_DIS_PSL(crtc->pipe),
> +			     CURSOR_GATING_DIS, 0);
> +}
> +
>  static bool
>  is_trans_port_sync_slave(const struct intel_crtc_state *crtc_state)
>  {
> @@ -2939,6 +2963,9 @@ static void intel_pre_plane_update(struct intel_atomic_state *state,
>  	    needs_scalerclk_wa(new_crtc_state))
>  		icl_wa_scalerclkgating(dev_priv, pipe, true);
>  
> +	/* Wa_1604331009:icl,jsl,ehl */
> +	icl_wa_cursorclkgating(new_crtc_state);

This looks a bit wrong. We shouldn't turn the clock gating back on
until after HDR mode has been disabled.

So please model this after skl_wa_827() and icl_wa_scalerclkgating()
so that a) the ordering is correct, and b) the code between all three
w/as looks consistent.

> +
>  	/*
>  	 * Vblank time updates from the shadow to live plane control register
>  	 * are blocked if the memory self-refresh mode is active at that
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index c857fafb8a30..703d708c773e 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4235,6 +4235,11 @@ enum {
>  #define INF_UNIT_LEVEL_CLKGATE		_MMIO(0x9560)
>  #define   CGPSF_CLKGATE_DIS		(1 << 3)
>  
> +/*
> + * GEN11 clock gating regs
> + */
> +#define   CURSOR_GATING_DIS            BIT(28)

This looks misplaced. It should be next to the other bits of whatever
register this is. Also pls use REG_BIT() instead of BIT().

> +
>  /*
>   * Display engine regs
>   */
> -- 
> 2.31.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel


More information about the Intel-gfx mailing list