[Intel-gfx] [v3 3/5] drm/i915: Get proper min cdclk if vDSC enabled

Jani Nikula jani.nikula at intel.com
Wed Sep 8 11:29:45 UTC 2021


On Thu, 02 Sep 2021, Lee Shawn C <shawn.c.lee at intel.com> wrote:
> VDSC engine can process only 1 pixel per Cd clock. In case
> VDSC is used and max slice count == 1, max supported pixel
> clock should be 100% of CD clock. Then do min_cdclk and
> pixel clock comparison to get proper min cdclk.
>
> v2:
> - Check for dsc enable and slice count ==1 then allow to
>   double confirm min cdclk value.
>
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
> Cc: Cooper Chiou <cooper.chiou at intel.com>
> Cc: William Tseng <william.tseng at intel.com>
> Signed-off-by: Lee Shawn C <shawn.c.lee at intel.com>
> Reviewed-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_cdclk.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index 34fa4130d5c4..9aec17b33819 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -2139,6 +2139,16 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
>  	/* Account for additional needs from the planes */
>  	min_cdclk = max(intel_planes_min_cdclk(crtc_state), min_cdclk);
>  
> +	/*
> +	 * VDSC engine can process only 1 pixel per Cd clock.
> +	 * In case VDSC is used and max slice count == 1,
> +	 * max supported pixel clock should be 100% of CD clock.
> +	 * Then do min_cdclk and pixel clock comparison to get cdclk.
> +	 */

To elaborate, we can't use two VDSC engines to reach an effective 2 ppc
when the slice count is 1, and are thus limited to 1 ppc.

> +	if (crtc_state->dsc.compression_enable &&
> +	    crtc_state->dsc.slice_count == 1)
> +		min_cdclk = max(min_cdclk, (int)crtc_state->pixel_rate);

Acked-by: Jani Nikula <jani.nikula at intel.com>

This is the immediate fix, but I think we'll need to improve this later
on. In some cases, especially with DP and maybe not so much with DSI, we
may have cases where the min_cdclk will now exceed the max_cdclk and
fail the compute config. In that case, we should do a better job of
pruning the mode up front instead of letting userspace think it's okay,
only to fail it at this stage.

We should probably also abstract the ppc limitations in the DSC code
better, instead of having them leak here.

BR,
Jani.


> +
>  	/*
>  	 * HACK. Currently for TGL platforms we calculate
>  	 * min_cdclk initially based on pixel_rate divided

-- 
Jani Nikula, Intel Open Source Graphics Center


More information about the Intel-gfx mailing list