[Intel-gfx] [RFC 3/5] drm/i915/panelreplay: Initializaton and compute config for panel replay

Manna, Animesh animesh.manna at intel.com
Wed Sep 8 19:50:05 UTC 2021



> -----Original Message-----
> From: Souza, Jose <jose.souza at intel.com>
> Sent: Thursday, September 9, 2021 1:02 AM
> To: Manna, Animesh <animesh.manna at intel.com>; intel-
> gfx at lists.freedesktop.org
> Cc: Mun, Gwan-gyeong <gwan-gyeong.mun at intel.com>; Nikula, Jani
> <jani.nikula at intel.com>; Kahola, Mika <mika.kahola at intel.com>; Navare,
> Manasi D <manasi.d.navare at intel.com>
> Subject: Re: [Intel-gfx] [RFC 3/5] drm/i915/panelreplay: Initializaton and
> compute config for panel replay
> 
> On Wed, 2021-09-08 at 14:45 +0530, Animesh Manna wrote:
> > As panel replay feature similar to PSR feature of EDP panel, so
> > currently utilized existing psr framework for panel replay.
> >
> > Signed-off-by: Animesh Manna <animesh.manna at intel.com>
> > ---
> >  .../drm/i915/display/intel_display_types.h    |  4 ++
> >  drivers/gpu/drm/i915/display/intel_dp.c       | 47 +++++++++++++++----
> >  drivers/gpu/drm/i915/display/intel_psr.c      | 43 +++++++++++++++++
> >  drivers/gpu/drm/i915/display/intel_psr.h      |  3 ++
> >  include/drm/drm_dp_helper.h                   |  3 ++
> >  5 files changed, 91 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index c7bcf9183447..6ca9fabb9333 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -1066,6 +1066,7 @@ struct intel_crtc_state {
> >  	bool req_psr2_sdp_prior_scanline;
> >  	u32 dc3co_exitline;
> >  	u16 su_y_granularity;
> > +	bool has_panel_replay;
> >
> >  	/*
> >  	 * Frequence the dpll for the port should run at. Differs from the
> > @@ -1526,6 +1527,8 @@ struct intel_psr {
> >  	bool irq_aux_error;
> >  	u16 su_w_granularity;
> >  	u16 su_y_granularity;
> > +	bool sink_pr_support;
> > +	bool pr_enabled;
> 
> Instead of all the above we could have a function that checks if displayPort is
> eDP or not, to know if is PSR or PR.
> sink_support and all the others should be shared for PSR and PR.

To get sink capability for panel replay dpcd address 0xb0 is read by the source. I feel PSR is using different dpcd address ...rt?
DP 2.0 display only support panel replay ... maybe need to add a check for DP 2.0 also here before reading about panel replay capability or I am missing anything.

Regards,
Animesh 
> 
> >  	u32 dc3co_exitline;
> >  	u32 dc3co_exit_delay;
> >  	struct delayed_work dc3co_work;
> > @@ -1552,6 +1555,7 @@ struct intel_dp {
> >  	u8
> lttpr_phy_caps[DP_MAX_LTTPR_COUNT][DP_LTTPR_PHY_CAP_SIZE];
> >  	u8 fec_capable;
> >  	u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE];
> > +	u8 pr_dpcd;
> 
> Used once why cache it?
> 
> >  	/* source rates */
> >  	int num_source_rates;
> >  	const int *source_rates;
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > b/drivers/gpu/drm/i915/display/intel_dp.c
> > index d28bd8c4a8a5..90c708548811 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -1560,12 +1560,22 @@ static void
> intel_dp_compute_vsc_colorimetry(const struct intel_crtc_state *crtc
> >  	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> >  	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> >
> > -	/*
> > -	 * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118
> > -	 * VSC SDP supporting 3D stereo, PSR2, and Pixel Encoding/
> > -	 * Colorimetry Format indication.
> > -	 */
> > -	vsc->revision = 0x5;
> > +	if (crtc_state->has_panel_replay) {
> > +		/*
> > +		 * Prepare VSC Header for SU as per DP 2.0 spec, Table 2-223
> > +		 * VSC SDP supporting 3D stereo, Panel Replay, and Pixel
> > +		 * Encoding/Colorimetry Format indication.
> > +		 */
> > +		vsc->revision = 0x7;
> > +	} else {
> > +		/*
> > +		 * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118
> > +		 * VSC SDP supporting 3D stereo, PSR2, and Pixel Encoding/
> > +		 * Colorimetry Format indication.
> > +		 */
> > +		vsc->revision = 0x5;
> > +	}
> > +
> >  	vsc->length = 0x13;
> >
> >  	/* DP 1.4a spec, Table 2-120 */
> > @@ -1674,6 +1684,22 @@ void intel_dp_compute_psr_vsc_sdp(struct
> intel_dp *intel_dp,
> >  			vsc->revision = 0x4;
> >  			vsc->length = 0xe;
> >  		}
> > +	} else if (intel_dp->psr.pr_enabled) {
> > +		if (intel_dp->psr.colorimetry_support &&
> > +		    intel_dp_needs_vsc_sdp(crtc_state, conn_state)) {
> > +			/* [PR, +Colorimetry] */
> > +			intel_dp_compute_vsc_colorimetry(crtc_state,
> conn_state,
> > +							 vsc);
> > +		} else {
> > +			/*
> > +			 * [PR, -Colorimetry]
> > +			 * Prepare VSC Header for SU as per DP 2.0 spec, Table
> 2-223
> > +			 * VSC SDP supporting 3D stereo + PR (applies to eDP
> v1.3 or
> > +			 * higher).
> > +			 */
> > +			vsc->revision = 0x6;
> > +			vsc->length = 0x10;
> > +		}
> >  	} else {
> >  		/*
> >  		 * [PSR1]
> > @@ -1814,6 +1840,7 @@ intel_dp_compute_config(struct intel_encoder
> > *encoder,
> >
> >  	intel_vrr_compute_config(pipe_config, conn_state);
> >  	intel_psr_compute_config(intel_dp, pipe_config);
> > +	intel_panel_replay_compute_config(intel_dp, pipe_config);
> >  	intel_drrs_compute_config(intel_dp, pipe_config, output_bpp,
> >  				  constant_n);
> >  	intel_dp_compute_vsc_sdp(intel_dp, pipe_config, conn_state); @@
> > -2719,10 +2746,10 @@ static ssize_t intel_dp_vsc_sdp_pack(const struct
> drm_dp_vsc_sdp *vsc,
> >  	sdp->sdp_header.HB3 = vsc->length; /* Number of Valid Data Bytes */
> >
> >  	/*
> > -	 * Only revision 0x5 supports Pixel Encoding/Colorimetry Format as
> > -	 * per DP 1.4a spec.
> > +	 * Revision 0x5 and 0x7 supports Pixel Encoding/Colorimetry Format as
> > +	 * per DP 1.4a spec and DP 2.0 spec respectively.
> >  	 */
> > -	if (vsc->revision != 0x5)
> > +	if (vsc->revision != 0x5 || vsc->revision != 0x7)
> >  		goto out;
> >
> >  	/* VSC SDP Payload for DB16 through DB18 */ @@ -5017,6 +5044,8
> @@
> > intel_dp_init_connector(struct intel_digital_port *dig_port,
> >
> >  	intel_psr_init(intel_dp);
> >
> > +	intel_panel_replay_init(intel_dp);
> > +
> >  	return true;
> >
> >  fail:
> > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> > b/drivers/gpu/drm/i915/display/intel_psr.c
> > index 5fa76b148f6d..660e19c10aa8 100644
> > --- a/drivers/gpu/drm/i915/display/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> > @@ -947,6 +947,21 @@ static bool intel_psr2_config_valid(struct intel_dp
> *intel_dp,
> >  	return true;
> >  }
> >
> > +void intel_panel_replay_compute_config(struct intel_dp *intel_dp,
> > +				       struct intel_crtc_state *crtc_state) {
> > +	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > +
> > +	if (!intel_dp->psr.sink_pr_support)
> > +		return;
> > +
> > +	crtc_state->has_panel_replay = true;
> > +	crtc_state->infoframes.enable |=
> > +intel_hdmi_infoframe_enable(DP_SDP_VSC);
> > +
> > +	if (HAS_PSR2_SEL_FETCH(dev_priv))
> > +		intel_psr2_sel_fetch_config_valid(intel_dp, crtc_state); }
> > +
> >  void intel_psr_compute_config(struct intel_dp *intel_dp,
> >  			      struct intel_crtc_state *crtc_state)  { @@ -1177,6
> +1192,7
> > @@ static void intel_psr_enable_locked(struct intel_dp *intel_dp,
> >  	drm_WARN_ON(&dev_priv->drm, intel_dp->psr.enabled);
> >
> >  	intel_dp->psr.psr2_enabled = crtc_state->has_psr2;
> > +	intel_dp->psr.pr_enabled = crtc_state->has_panel_replay;
> >  	intel_dp->psr.busy_frontbuffer_bits = 0;
> >  	intel_dp->psr.pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe;
> >  	intel_dp->psr.transcoder = crtc_state->cpu_transcoder; @@ -2089,6
> > +2105,33 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
> >  	}
> >  }
> >
> > +/**
> > + * intel_panel_replay_init - Check for sink and source capability.
> > + * @intel_dp: Intel DP
> > + *
> > + * This function is called after the initializing connector.
> > + * (the initializing of connector treats the handling of connector
> > +capabilities)
> > + * And it initializes basic panel replay stuff for each DP Encoder.
> > + */
> > +void intel_panel_replay_init(struct intel_dp *intel_dp) {
> > +	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > +
> > +	if (!HAS_PR(dev_priv))
> > +		return;
> > +
> > +	drm_dp_dpcd_read(&intel_dp->aux, DP_PANEL_REPLAY_SUPPORT,
> &intel_dp->pr_dpcd,
> > +			 sizeof(intel_dp->pr_dpcd));
> > +
> > +	if (!(intel_dp->pr_dpcd & PANEL_REPLAY_SUPPORT)) {
> > +		drm_dbg_kms(&dev_priv->drm,
> > +			    "Panel replay is not supported by panel\n");
> > +		return;
> > +	}
> > +
> > +	intel_dp->psr.sink_pr_support = true; }
> > +
> >  /**
> >   * intel_psr_init - Init basic PSR work and mutex.
> >   * @intel_dp: Intel DP
> > diff --git a/drivers/gpu/drm/i915/display/intel_psr.h
> > b/drivers/gpu/drm/i915/display/intel_psr.h
> > index 641521b101c8..c190ec46a9fc 100644
> > --- a/drivers/gpu/drm/i915/display/intel_psr.h
> > +++ b/drivers/gpu/drm/i915/display/intel_psr.h
> > @@ -36,6 +36,7 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
> >  		     unsigned frontbuffer_bits,
> >  		     enum fb_op_origin origin);
> >  void intel_psr_init(struct intel_dp *intel_dp);
> > +void intel_panel_replay_init(struct intel_dp *intel_dp);
> >  void intel_psr_compute_config(struct intel_dp *intel_dp,
> >  			      struct intel_crtc_state *crtc_state);  void
> > intel_psr_get_config(struct intel_encoder *encoder, @@ -53,5 +54,7 @@
> > void intel_psr2_program_plane_sel_fetch(struct intel_plane *plane,
> >  					int color_plane);
> >  void intel_psr_pause(struct intel_dp *intel_dp);  void
> > intel_psr_resume(struct intel_dp *intel_dp);
> > +void intel_panel_replay_compute_config(struct intel_dp *intel_dp,
> > +				       struct intel_crtc_state *crtc_state);
> >
> >  #endif /* __INTEL_PSR_H__ */
> > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> > index 1d5b3dbb6e56..1b4dcee3b281 100644
> > --- a/include/drm/drm_dp_helper.h
> > +++ b/include/drm/drm_dp_helper.h
> > @@ -537,6 +537,9 @@ struct drm_panel;
> >  #define DP_DSC_BRANCH_OVERALL_THROUGHPUT_1  0x0a1
> >  #define DP_DSC_BRANCH_MAX_LINE_WIDTH        0x0a2
> >
> > +#define DP_PANEL_REPLAY_SUPPORT             0x0b0
> > +# define PANEL_REPLAY_SUPPORT               (1 << 0)
> > +
> >  /* Link Configuration */
> >  #define	DP_LINK_BW_SET		            0x100
> >  # define DP_LINK_RATE_TABLE		    0x00    /* eDP 1.4 */



More information about the Intel-gfx mailing list