[Intel-gfx] [PATCH 2/8] drm/i915/xehp: CCS shares the render reset domain

[Tvrtko Ursulin]

On 08/09/2021 21:23, Matt Roper wrote:
> On Wed, Sep 08, 2021 at 11:07:07AM +0100, Tvrtko Ursulin wrote:
>>
>> On 07/09/2021 18:19, Matt Roper wrote:
>>> The reset domain is shared between render and all compute engines,
>>> so resetting one will affect the others.
>>>
>>> Note:  Before performing a reset on an RCS or CCS engine, the GuC will
>>> attempt to preempt-to-idle the other non-hung RCS/CCS engines to avoid
>>> impacting other clients (since some shared modules will be reset).  If
>>> other engines are executing non-preemptable workloads, the impact is
>>> unavoidable and some work may be lost.
>>
>> Since here it talks about engine reset, should this patch add warning if
>> same is attempted by i915 on a GuC platform - to document it is not
> 
> Did you mean "on a *non* GuC platform" here?  We aren't going to have
> compute engine support on any platforms where GuC submission isn't the
> default operating model, so the only way to get compute engines +
> execlist submission is to force an override via module parameters (e.g.,
> enable_guc=0).  Doing so will taint the kernel, so I think the current
> consensus from offline discussion is that the user has already put
> themselves into a configuration where it's easier than usual to shoot
> themselves in the foot; it's not too much different than the kind of
> trouble a user could get themselves into if they loaded the driver with
> hangcheck disabled or something.

Yes I meant non GuC. :)

Okay..ish, although I think an explicit warn would still be better. 
Because it is one thing to taint and another to actively allow something 
which we know cannot work.

Unless we could hide the CCS engine until GuC gets loaded, which would 
make i915.enable_guc=0 safe. Hm.. should be doable actually to skip 
intel_engine_add_user in the engine init phase and do the CCS ones after 
GuC has been loaded. Would that make sense?

Regards,

Tvrtko

>> implemented/supported? Or perhaps later in the series, or future series
>> works better.
>>
>> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
>>
>> Regards,
>>
>> Tvrtko
>>
>>> Bspec: 52549
>>> Original-patch-by: Michel Thierry
>>> Cc: Tvrtko Ursulin <tvrtko.ursulin at linux.intel.com>
>>> Cc: Vinay Belgaumkar <vinay.belgaumkar at intel.com>
>>> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio at intel.com>
>>> Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty at intel.com>
>>> Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
>>> ---
>>>    drivers/gpu/drm/i915/gt/intel_reset.c | 4 ++++
>>>    1 file changed, 4 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/i915/gt/intel_reset.c b/drivers/gpu/drm/i915/gt/intel_reset.c
>>> index 91200c43951f..30598c1d070c 100644
>>> --- a/drivers/gpu/drm/i915/gt/intel_reset.c
>>> +++ b/drivers/gpu/drm/i915/gt/intel_reset.c
>>> @@ -507,6 +507,10 @@ static int gen11_reset_engines(struct intel_gt *gt,
>>>    		[VECS1] = GEN11_GRDOM_VECS2,
>>>    		[VECS2] = GEN11_GRDOM_VECS3,
>>>    		[VECS3] = GEN11_GRDOM_VECS4,
>>> +		[CCS0] = GEN11_GRDOM_RENDER,
>>> +		[CCS1] = GEN11_GRDOM_RENDER,
>>> +		[CCS2] = GEN11_GRDOM_RENDER,
>>> +		[CCS3] = GEN11_GRDOM_RENDER,
>>>    	};
>>>    	struct intel_engine_cs *engine;
>>>    	intel_engine_mask_t tmp;
>>>
>