[Intel-gfx] [PATCH] drm/i915/display: Enable second VDSC engine for higher moderates

Tue Sep 14 14:40:17 UTC 2021

> -----Original Message-----
> From: Nikula, Jani <jani.nikula at intel.com>
> Sent: Tuesday, September 14, 2021 7:33 PM
> To: Lisovskiy, Stanislav <stanislav.lisovskiy at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>; Kulkarni, Vandita
> <vandita.kulkarni at intel.com>; intel-gfx at lists.freedesktop.org; Navare,
> Manasi D <manasi.d.navare at intel.com>
> Subject: Re: [Intel-gfx] [PATCH] drm/i915/display: Enable second VDSC
> engine for higher moderates
> 
> On Tue, 14 Sep 2021, "Lisovskiy, Stanislav" <stanislav.lisovskiy at intel.com>
> wrote:
> > On Tue, Sep 14, 2021 at 04:04:25PM +0300, Lisovskiy, Stanislav wrote:
> >> On Tue, Sep 14, 2021 at 03:04:11PM +0300, Jani Nikula wrote:
> >> > On Tue, 14 Sep 2021, "Lisovskiy, Stanislav"
> <stanislav.lisovskiy at intel.com> wrote:
> >> > > On Tue, Sep 14, 2021 at 10:48:46AM +0300, Ville Syrjälä wrote:
> >> > >> On Tue, Sep 14, 2021 at 07:31:46AM +0000, Kulkarni, Vandita wrote:
> >> > >> > > -----Original Message-----
> >> > >> > > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >> > >> > > Sent: Tuesday, September 14, 2021 12:59 PM
> >> > >> > > To: Kulkarni, Vandita <vandita.kulkarni at intel.com>
> >> > >> > > Cc: intel-gfx at lists.freedesktop.org; Nikula, Jani
> >> > >> > > <jani.nikula at intel.com>; Navare, Manasi D
> >> > >> > > <manasi.d.navare at intel.com>
> >> > >> > > Subject: Re: [Intel-gfx] [PATCH] drm/i915/display: Enable
> >> > >> > > second VDSC engine for higher moderates
> >> > >> > >
> >> > >> > > On Mon, Sep 13, 2021 at 08:09:23PM +0530, Vandita Kulkarni
> wrote:
> >> > >> > > > Each VDSC operates with 1ppc throughput, hence enable the
> >> > >> > > > second VDSC engine when moderate is higher that the current
> cdclk.
> >> > >> > > >
> >> > >> > > > Signed-off-by: Vandita Kulkarni
> >> > >> > > > <vandita.kulkarni at intel.com>
> >> > >> > > > ---
> >> > >> > > >  drivers/gpu/drm/i915/display/intel_dp.c | 12 ++++++++++--
> >> > >> > > >  1 file changed, 10 insertions(+), 2 deletions(-)
> >> > >> > > >
> >> > >> > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> >> > >> > > > b/drivers/gpu/drm/i915/display/intel_dp.c
> >> > >> > > > index 161c33b2c869..55878f65f724 100644
> >> > >> > > > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> >> > >> > > > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> >> > >> > > > @@ -70,6 +70,7 @@
> >> > >> > > >  #include "intel_tc.h"
> >> > >> > > >  #include "intel_vdsc.h"
> >> > >> > > >  #include "intel_vrr.h"
> >> > >> > > > +#include "intel_cdclk.h"
> >> > >> > > >
> >> > >> > > >  #define DP_DPRX_ESI_LEN 14
> >> > >> > > >
> >> > >> > > > @@ -1291,10 +1292,13 @@ static int
> >> > >> > > > intel_dp_dsc_compute_config(struct
> >> > >> > > intel_dp *intel_dp,
> >> > >> > > >  				       struct drm_connector_state
> *conn_state,
> >> > >> > > >  				       struct link_config_limits *limits)  {
> >> > >> > > > +	struct intel_cdclk_state *cdclk_state;
> >> > >> > > >  	struct intel_digital_port *dig_port =
> dp_to_dig_port(intel_dp);
> >> > >> > > >  	struct drm_i915_private *dev_priv = to_i915(dig_port-
> >> > >> > > >base.base.dev);
> >> > >> > > >  	const struct drm_display_mode *adjusted_mode =
> >> > >> > > >  		&pipe_config->hw.adjusted_mode;
> >> > >> > > > +	struct intel_atomic_state *state =
> >> > >> > > > +				to_intel_atomic_state(pipe_config-
> >> > >> > > >uapi.state);
> >> > >> > > >  	int pipe_bpp;
> >> > >> > > >  	int ret;
> >> > >> > > >
> >> > >> > > > @@ -1373,12 +1377,16 @@ static int
> >> > >> > > > intel_dp_dsc_compute_config(struct
> >> > >> > > intel_dp *intel_dp,
> >> > >> > > >  		}
> >> > >> > > >  	}
> >> > >> > > >
> >> > >> > > > +	cdclk_state = intel_atomic_get_cdclk_state(state);
> >> > >> > > > +	if (IS_ERR(cdclk_state))
> >> > >> > > > +		return PTR_ERR(cdclk_state);
> >> > >> > > > +
> >> > >> > > >  	/*
> >> > >> > > >  	 * VDSC engine operates at 1 Pixel per clock, so if peak pixel
> rate
> >> > >> > > > -	 * is greater than the maximum Cdclock and if slice count is
> even
> >> > >> > > > +	 * is greater than the current Cdclock and if slice
> >> > >> > > > +count is even
> >> > >> > > >  	 * then we need to use 2 VDSC instances.
> >> > >> > > >  	 */
> >> > >> > > > -	if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq
> ||
> >> > >> > > > +	if (adjusted_mode->crtc_clock >
> >> > >> > > > +cdclk_state->actual.cdclk ||
> >> > >> > >
> >> > >> > > This is wrong. We compute the cdclk based on the
> >> > >> > > requirements of the mode/etc., not the other way around.
> >> > >
> >> > > According to BSpec guideline, we decide whether we enable or
> >> > > disable second VDSC engine, based on that condition. As I
> >> > > understand that one is about DSC config calculation, based on CDCLK
> which was calculated.
> >> >
> >> > Point is, at the time compute_config gets called, what guarantees
> >> > are there that cdclk_state->actual.cdclk contains anything useful?
> >> > This is the design we have.
> >>
> >> That is actually good question, was willing to check that as well.
> >>
> >> >
> >> > > If we bump up CDCLK, to avoid this, will we even then use a second
> VDSC ever?
> >> >
> >> > I think we'll eventually need better logic than unconditionally
> >> > bumping to max, and it needs to take *both* the cdclk and the
> >> > number of dsc engines into account. The referenced bspec only has
> >> > the vdsc clock perspective, not overall perspective.
> >>
> >> What we need to clarify here is that how this is supposed to work in
> theory.
> >> Basically same issue can be fixed by both increasing the CDCLK or
> >> enabling 2nd VDSC engine.
> >> There should be some guideline telling us, how to prioritize.
> >> From overall perspective as I understand, by default, we are able to
> >> keep CDCLK 2 times less than pixel rate(see
> >> intel_pixel_rate_to_cdclk), however due to that VDSC limitation that
> >> it can use only 1 ppc this becomes, not applicable anymore(at least
> >> as of BSpec 49259), so we have to increase amount of VDSC instances
> then.
> >>
> >> So the question is now - what is more optimal here?
> >> Also if we bump up CDCLK(which we have done many times already in
> >> fact), we then need to add some logic to intel_compute_min_cdclk to
> >> check if we are using DSC or not, because otherwise we don't really need
> to do that.
> 
> intel_compute_min_cdclk() already needs to be dsc aware when slice count
> is 1 and we can't use two dsc engines anyway. See the recent commit
> fe01883fdcef ("drm/i915: Get proper min cdclk if vDSC enabled").
> 
> Looking again, I'm not sure that does the right decision for when
> dsc.slice_count > 1, but dsc.split == false. It should probably use dsc.split for
> the decision.
> 
> >>
> >> Stan
> >
> > Checked and indeed, encoder->compute_config is called way before,
> > basically CDCLK calculation is called almost in the end of
> > atomic_check, so in compute_config, there would be an old CDCLK value
> > copied from previous cdclk state, but not the last one.
> >
> > Vandita, this means we actually can't do it that way, if you want to
> > do anything with VDSC based on CDCLK this has to be done _after_
> > intel_compute_min_cdclk was called. Which is not very sweet, I guess.
> >
> > So as of current architecture, it seems that the easiest way is indeed
> > to bump the CDCLK or we need to figure the way how to enable 2nd VDSC
> > somewhere else, after CDCLK was calculated.
> 
> Alternatively, we could use two dsc engines more aggressively, but that
> decision currently can't take overall chosen cdclk into account.
> 
> We'll end up sometimes unnecessarily using a too high cdclk or two dsc
> engines, just have to pick the poison.
> 
> I think trying to do dsc decisions after intel_compute_min_cdclk() gets way
> too complicated.

In this case, can we just use the 2nd VDSC engine if slice_count is 2 or more?
Which would mean we always operate in joiner enabled mode(small joiner) of all the compression modes of operation
mentioned in the table bspec: 49259
Because we are still going to hit the max cdclk restriction for higher resolutions, and many lower resolutions wouldn’t need max cdclk.
And eventually once we have more details on cd clk vs 2VDSC engine we could add
the logic to choose one over the other?

I see that in case of DSI we do split = true, for slice_count > 1 but that would need a different set of checks, thats a TBD.

Or Do you suggest I just do this for now max cdclk when slice_count =1  (what we are doing now) replace with compression = true and split = false

Thanks,
Vandita
> 
> BR,
> Jani
> 
> 
> 
> 
> >
> > Stan
> >
> >>
> >> >
> >> > BR,
> >> > Jani.
> >> >
> >> > > Another thing is that probably enabling second VDSC is cheaper in
> >> > > terms of power consumption, than bumping up the CDCLK.
> >> > >
> >> > > Stan
> >> > >
> >> > >> >
> >> > >> > Okay , So you suggest that we set the cd clock to max when we
> have such requirement, than enabling the second engine?
> >> > >>
> >> > >> That seems like the easiest solution. Another option might be to
> >> > >> come up with some lower dotclock limit for the use of the second
> >> > >> vdsc. But not sure we know where the tipping point is wrt. powr
> consumption.
> >> > >>
> >> > >> --
> >> > >> Ville Syrjälä
> >> > >> Intel
> >> >
> >> > --
> >> > Jani Nikula, Intel Open Source Graphics Center
> 
> --
> Jani Nikula, Intel Open Source Graphics Center