[Intel-gfx] [PATCH 02/16] drm/i915: Disable all planes before modesetting any pipes

Navare, Manasi manasi.d.navare at intel.com
Mon Sep 27 11:20:53 UTC 2021


On Tue, Sep 21, 2021 at 03:49:24PM +0300, Ville Syrjälä wrote:
> On Mon, Sep 20, 2021 at 12:52:15AM -0700, Navare, Manasi wrote:
> > On Mon, Sep 13, 2021 at 05:44:26PM +0300, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > 
> > > Let's disable planes on all pipes affected by the modeset before
> > > we start doing the actual modeset. This means we have less
> > > random planes enabled during the modeset, and it also mirrors
> > > what we already do when enabling pipes on skl+ since we enable
> > > planes on all pipes as the very last step. As a bonus we also
> > > nuke a bunch og bigjoiner special casing.
> > > 
> > > I've occasionally pondered about going even furher here and
> > > doing the pre_plane_update() stuff for all pipes first, then
> > > actually disabling the planes, and finally running the rest
> > > of the modeset sequence. This would potentially allow
> > > parallelizing all the extra vblank waits across multiple pipes,
> > > and would make the plane disable even more atomic. But let's
> > > go one step a time here.
> > 
> > So you are moving the plane disables all together in the commit_disables()?
> > But dont we need to pass old_crtc_state->bigjoiner_linked_crtc) crtc in case of bigjoiner?
> > How is that handled?
> 
> Whether bigjoiner is used or not is irrelevant when disabling the
> planes.
>

So basically now you disable planes for all the crtcs in state that have been active?

Makes sense to me

Reviewed-by: Manasi Navare <manasi.d.navare at intel.com>

Manasi
 
> > 
> > Regards
> > Manasi
> > 
> > > 
> > > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/display/intel_display.c | 28 +++++++++-----------
> > >  1 file changed, 13 insertions(+), 15 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > index cd150512d275..afa26911c236 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -9785,18 +9785,13 @@ static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
> > >  
> > >  	drm_WARN_ON(&dev_priv->drm, old_crtc_state->bigjoiner_slave);
> > >  
> > > -	intel_crtc_disable_planes(state, crtc);
> > > -
> > >  	/*
> > >  	 * We still need special handling for disabling bigjoiner master
> > >  	 * and slaves since for slave we do not have encoder or plls
> > >  	 * so we dont need to disable those.
> > >  	 */
> > > -	if (old_crtc_state->bigjoiner) {
> > > -		intel_crtc_disable_planes(state,
> > > -					  old_crtc_state->bigjoiner_linked_crtc);
> > > +	if (old_crtc_state->bigjoiner)
> > >  		old_crtc_state->bigjoiner_linked_crtc->active = false;
> > > -	}
> > >  
> > >  	/*
> > >  	 * We need to disable pipe CRC before disabling the pipe,
> > > @@ -9823,6 +9818,18 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> > >  	u32 handled = 0;
> > >  	int i;
> > >  
> > > +	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> > > +					    new_crtc_state, i) {
> > > +		if (!intel_crtc_needs_modeset(new_crtc_state))
> > > +			continue;
> > > +
> > > +		if (!old_crtc_state->hw.active)
> > > +			continue;
> > > +
> > > +		intel_pre_plane_update(state, crtc);
> > > +		intel_crtc_disable_planes(state, crtc);
> > > +	}
> > > +
> > >  	/* Only disable port sync and MST slaves */
> > >  	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> > >  					    new_crtc_state, i) {
> > > @@ -9841,7 +9848,6 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> > >  		    !intel_dp_mst_is_slave_trans(old_crtc_state))
> > >  			continue;
> > >  
> > > -		intel_pre_plane_update(state, crtc);
> > >  		intel_old_crtc_state_disables(state, old_crtc_state,
> > >  					      new_crtc_state, crtc);
> > >  		handled |= BIT(crtc->pipe);
> > > @@ -9855,14 +9861,6 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> > >  		    old_crtc_state->bigjoiner_slave)
> > >  			continue;
> > >  
> > > -		intel_pre_plane_update(state, crtc);
> > > -		if (old_crtc_state->bigjoiner) {
> > > -			struct intel_crtc *slave =
> > > -				old_crtc_state->bigjoiner_linked_crtc;
> > > -
> > > -			intel_pre_plane_update(state, slave);
> > > -		}
> > > -
> > >  		if (old_crtc_state->hw.active)
> > >  			intel_old_crtc_state_disables(state, old_crtc_state,
> > >  						      new_crtc_state, crtc);
> > > -- 
> > > 2.32.0
> > > 
> 
> -- 
> Ville Syrjälä
> Intel


More information about the Intel-gfx mailing list