[Intel-gfx] [Freedreno] [PATCH v2 13/13] drm/msm: Implement HDCP 1.x using the new drm HDCP helpers

Sean Paul sean at poorly.run
Wed Sep 29 14:52:20 UTC 2021


On Tue, Sep 28, 2021 at 02:35:09PM -0700, abhinavk at codeaurora.org wrote:
> On 2021-09-28 11:02, Sean Paul wrote:
> > On Tue, Sep 21, 2021 at 07:25:41PM -0700, abhinavk at codeaurora.org wrote:
> > > On 2021-09-15 13:38, Sean Paul wrote:
> > > > From: Sean Paul <seanpaul at chromium.org>
> > > >
> > > > This patch adds HDCP 1.x support to msm DP connectors using the new HDCP
> > > > helpers.
> > > >
> > > > Cc: Stephen Boyd <swboyd at chromium.org>
> > > > Signed-off-by: Sean Paul <seanpaul at chromium.org>
> > > > Link:
> > > > https://patchwork.freedesktop.org/patch/msgid/20210913175747.47456-15-sean@poorly.run
> > > > #v1
> > > >
> > > > Changes in v2:
> > > > -Squash [1] into this patch with the following changes (Stephen)
> > > >   -Update the sc7180 dtsi file
> > > >   -Remove resource names and just use index (Stephen)
> > > >
> > > 
> > > 
> > > > [1]
> > > > https://patchwork.freedesktop.org/patch/msgid/20210913175747.47456-14-sean@poorly.run
> > > > ---
> > 
> > /snip
> > 
> > > > diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> > > > index 904535eda0c4..98731fd262d6 100644
> > > > --- a/drivers/gpu/drm/msm/Makefile
> > > > +++ b/drivers/gpu/drm/msm/Makefile
> > > > @@ -109,6 +109,7 @@ msm-$(CONFIG_DRM_MSM_DP)+= dp/dp_aux.o \
> > > >  	dp/dp_ctrl.o \
> > > >  	dp/dp_display.o \
> > > >  	dp/dp_drm.o \
> > > > +	dp/dp_hdcp.o \
> > > >  	dp/dp_hpd.o \
> > > >  	dp/dp_link.o \
> > > >  	dp/dp_panel.o \
> > > > diff --git a/drivers/gpu/drm/msm/dp/dp_debug.c
> > > > b/drivers/gpu/drm/msm/dp/dp_debug.c
> > > > index 2f6247e80e9d..de16fca8782a 100644
> > > > --- a/drivers/gpu/drm/msm/dp/dp_debug.c
> > > > +++ b/drivers/gpu/drm/msm/dp/dp_debug.c
> > 
> > /snip
> > 
> > > > +static ssize_t dp_hdcp_key_write(struct file *file, const char __user
> > > > *ubuf,
> > > > +				 size_t len, loff_t *offp)
> > > > +{
> > > > +	char *input_buffer;
> > > > +	int ret = 0;
> > > > +	struct dp_debug_private *debug = file->private_data;
> > > > +	struct drm_device *dev;
> > > > +
> > > > +	dev = debug->drm_dev;
> > > > +
> > > > +	if (len != (DRM_HDCP_KSV_LEN + DP_HDCP_NUM_KEYS * DP_HDCP_KEY_LEN))
> > > > +		return -EINVAL;
> > > > +
> > > > +	if (!debug->hdcp)
> > > > +		return -ENOENT;
> > > > +
> > > > +	input_buffer = memdup_user_nul(ubuf, len);
> > > > +	if (IS_ERR(input_buffer))
> > > > +		return PTR_ERR(input_buffer);
> > > > +
> > > > +	ret = dp_hdcp_ingest_key(debug->hdcp, input_buffer, len);
> > > > +
> > > > +	kfree(input_buffer);
> > > > +	if (ret < 0) {
> > > > +		DRM_ERROR("Could not ingest HDCP key, ret=%d\n", ret);
> > > > +		return ret;
> > > > +	}
> > > > +
> > > > +	*offp += len;
> > > > +	return len;
> > > > +}
> > > 
> > > It seems like the HDCP keys written using debugfs, just for my
> > > understanding,
> > > are you storing this in some secure partition and the usermode reads
> > > from it
> > > and writes them here?
> > > 
> > 
> > We have not sorted out the userspace side of HDCP enablement yet, so it
> > remains
> > to be seen whether the keys will be injected via debugfs/firmware
> > file/property.
> > 
> > /snip
> > 
> > > > +static int dp_connector_atomic_check(struct drm_connector *connector,
> > > > +				     struct drm_atomic_state *state)
> > > > +{
> > > > +	struct drm_connector_state *conn_state;
> > > > +	struct dp_connector_state *dp_state;
> > > > +
> > > > +	conn_state = drm_atomic_get_new_connector_state(state, connector);
> > > > +	dp_state = to_dp_connector_state(conn_state);
> > > > +
> > > > +	dp_state->hdcp_transition = drm_hdcp_atomic_check(connector, state);
> > > 
> > > I have a general question related to the transition flag and overall
> > > tying
> > > the HDCP
> > > enable and authentication to the commit.
> > > So lets say there is a case where the driver needs to disable HDCP.
> > > It could
> > > be due
> > > to link integrity failure OR some other error condition which
> > > usermode is
> > > not aware of.
> > > In that case, we will set this hdcp_transition to true but in the next
> > > commit we will
> > > actually do the authentication. What if usermode doesnt issue a new
> > > frame?
> > > This question arises because currently the link intergrity check is
> > > done
> > > using SW polling
> > > in the previous patchset. But as I had commented there, this occurs
> > > in HW
> > > for us.
> > > I dont see that isr itself in this patchset. So wanted to understand
> > > if
> > > thats part of this
> > > approach to still tie it with commit.
> > > 
> > > So if we go with the HW polling based approach which is the preferred
> > > method, we need to
> > > untie this from the commit.
> > > 
> > 
> > In the case of error, the worker will detect it and try to
> > re-authenticate. If
> > the re-authentication is successful, userspace will continue to be
> > unaware and
> > everything will keep working. If re-authentication is unsuccessful, the
> > worker
> > will update the property value and issue a uevent to userspace. So HDCP
> > enablement is only tied to commits when the property value is changing
> > as a
> > result of userspace.
> > 
> > Regarding SW vs HW link checks, I don't think there's any difference in
> > efficacy
> > between them. If HW can be relied on to issue an interrupt in failure
> > cases, a
> > follow-up set allowing for this seems like a great idea.
> > 
> 
> Thanks for the explanation. Yes, from our experience it has been pretty
> reliable to
> issue signal integrity failures. We already had the isr based approach
> downstream
> and would prefer to keep it that way based on our experience of it firing
> reliably.
> We can still keep the SW polling code but it should come into effect only if
> HW polling
> is not supported / preferred.

Ok, understood. Unfortunately I don't have access to a testing rig which could
exercise the interrupt. Do you think you could post a follow-on patch to
implement this?


> 
> > > > +
> > > > +	return 0;
> > > > +}
> > 
> > /snip
> > 

/snip

> > > > +static int dp_hdcp_hdcp1_store_receiver_info(struct drm_connector
> > > > *connector,
> > > > +					     u32 *ksv, u32 status, u8 bcaps,
> > > > +					     bool is_repeater)
> > > > +{
> > > > +	struct dp_hdcp *hdcp = dp_display_connector_to_hdcp(connector);
> > > > +	u32 val;
> > > > +
> > > > +	dp_hdcp_write_tz(hdcp, HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA0,
> > > > +			 ksv[0]);
> > > > +	dp_hdcp_write_tz(hdcp, HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA1,
> > > > +			 ksv[1]);
> > > > +
> > > > +	val = ((status & GENMASK(15, 0)) << 8) | (bcaps & GENMASK(7, 0));
> > > > +
> > > > +	dp_hdcp_write_tz(hdcp, HDCP_SEC_DP_TZ_HV_HLOS_HDCP_RCVPORT_DATA12,
> > > > val);
> > > > +
> > > 
> > > Cant this entire API be skipped for non-repeater cases from the hdcp
> > > lib
> > > layer?
> > > You can write the bcaps to this earlier and write the bstatus only
> > > if its a
> > > repeater.
> > 
> > Could you expand on the benefits of this?
> 
> We can avoid the call coming into the vendor driver hook itself as it need
> not be called
> for non-repeater cases. So something like this can be done in the HDCP lib?
> 
> if ( repeater && ops->hdcp1_store_receiver_info )
>      ops->hdcp1_store_receiver_info(....);
> 

Unfortunately this would break Intel's implementation.

> > 
> > > 
> > > > +	return 0;
> > > > +}
> > 
> > /snip

-- 
Sean Paul, Software Engineer, Google / Chromium OS


More information about the Intel-gfx mailing list