[Intel-gfx] [PATCH 1/1] drm/i915/uc: Use platform specific defaults for GuC/HuC enabling

Tvrtko Ursulin tvrtko.ursulin at linux.intel.com
Thu Apr 7 15:49:30 UTC 2022


On 03/06/2021 17:48, Matthew Brost wrote:
> From: John Harrison <John.C.Harrison at Intel.com>
> 
> The meaning of 'default' for the enable_guc module parameter has been
> updated to accurately reflect what is supported on current platforms.
> So start using the defaults instead of forcing everything off.
> Although, note that right now, the default is for everything to be off
> anyway. So this is not a change for current platforms.
> 
> Signed-off-by: John Harrison <John.C.Harrison at Intel.com>
> Signed-off-by: Matthew Brost <matthew.brost at intel.com>
> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio at intel.com>
> ---
>   drivers/gpu/drm/i915/i915_params.c | 2 +-
>   drivers/gpu/drm/i915/i915_params.h | 2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
> index 0320878d96b0..e07f4cfea63a 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -160,7 +160,7 @@ i915_param_named_unsafe(edp_vswing, int, 0400,
>   i915_param_named_unsafe(enable_guc, int, 0400,
>   	"Enable GuC load for GuC submission and/or HuC load. "
>   	"Required functionality can be selected using bitmask values. "
> -	"(-1=auto, 0=disable [default], 1=GuC submission, 2=HuC load)");
> +	"(-1=auto [default], 0=disable, 1=GuC submission, 2=HuC load)");
>   
>   i915_param_named(guc_log_level, int, 0400,
>   	"GuC firmware logging level. Requires GuC to be loaded. "
> diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
> index 4a114a5ad000..f27eceb82c0f 100644
> --- a/drivers/gpu/drm/i915/i915_params.h
> +++ b/drivers/gpu/drm/i915/i915_params.h
> @@ -59,7 +59,7 @@ struct drm_printer;
>   	param(int, disable_power_well, -1, 0400) \
>   	param(int, enable_ips, 1, 0600) \
>   	param(int, invert_brightness, 0, 0600) \
> -	param(int, enable_guc, 0, 0400) \
> +	param(int, enable_guc, -1, 0400) \
>   	param(int, guc_log_level, -1, 0400) \
>   	param(char *, guc_firmware_path, NULL, 0400) \
>   	param(char *, huc_firmware_path, NULL, 0400) \

What is the BKM to use this with multi-GPU setups? Specifically I have a 
TGL+DG1 laptop (off the shelf) and want to have GuC with DG1 only. If I 
pass i915.enable_guc=3 it seems it wants to enable it for TGL as well 
and wedges the GPU if it can't?

Regards,

Tvrtko


More information about the Intel-gfx mailing list