[Intel-gfx] [PATCH] drm/i915/dg2: Do not explode on phy calibration error

[Lucas De Marchi]

On Mon, Apr 11, 2022 at 08:34:35AM -0700, Matt Roper wrote:
>On Sat, Apr 09, 2022 at 11:15:36PM -0700, Lucas De Marchi wrote:
>> When the PHY fails on calibration we were previously skipping the ddi
>> initialization. However the driver is not really prepared for that,
>> ultimately leading to a NULL pointer dereference:
>>
>> [   75.748348] i915 0000:03:00.0: [drm:intel_modeset_init_nogem [i915]] SNPS PHY A failed to calibrate; output will not be used.
>> ...
>> [   75.750336] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled
>> ...
>>
>> ( no DDI A/PHY A )
>> [   75.753080] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI B/PHY B] hw state readout: disabled, pipe A
>> [   75.753164] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:245:DDI C/PHY C] hw state readout: disabled, pipe A
>> ...
>> [   75.754425] i915 0000:03:00.0: [drm] *ERROR* crtc 80: Can't calculate constants, dotclock = 0!
>> [   75.765558] i915 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev))
>> [   75.765569] WARNING: CPU: 5 PID: 1759 at drivers/gpu/drm/drm_vblank.c:728 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x347/0x360
>> ...
>> [   75.781230] BUG: kernel NULL pointer dereference, address: 000000000000007c
>> [   75.788198] #PF: supervisor read access in kernel mode
>> [   75.793347] #PF: error_code(0x0000) - not-present page
>> [   75.798480] PGD 0 P4D 0
>> [   75.801019] Oops: 0000 [#1] PREEMPT SMP NOPTI
>> [   75.805377] CPU: 5 PID: 1759 Comm: modprobe Tainted: G        W         5.18.0-rc1-demarchi+ #199
>> [   75.827613] RIP: 0010:icl_aux_power_well_disable+0x3b/0x200 [i915]
>> [   75.833890] Code: 83 ec 30 65 48 8b 04 25 28 00 00 00 48 89 44 24 28 48 8b 06 0f b6 70 1c f6 40 20 04 8d 56 fa 0f 45 f2 e8 88 bd ff ff 48 89 ef <8b> 70 7c e8 ed 67 ff ff 48 89 ef 89 c6 e8 73 67 ff ff 84 c0 75 0a
>> [   75.852629] RSP: 0018:ffffc90003a7fb30 EFLAGS: 00010246
>> [   75.857852] RAX: 0000000000000000 RBX: ffff8881145e8f10 RCX: 0000000000000000
>> [   75.864978] RDX: ffff888115220840 RSI: 0000000000000000 RDI: ffff888115220000
>> [   75.872106] RBP: ffff888115220000 R08: ffff88888effffe8 R09: 00000000fffdffff
>> [   75.879234] R10: ffff88888e200000 R11: ffff88888ed00000 R12: ffff8881145e8f10
>> [   75.886363] R13: 0000000000000001 R14: ffff888115223240 R15: 0000000000000000
>> [   75.893490] FS:  00007ff6e753a740(0000) GS:ffff88888f680000(0000) knlGS:0000000000000000
>> [   75.901573] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [   75.907313] CR2: 000000000000007c CR3: 00000001216a6001 CR4: 0000000000770ee0
>> [   75.914446] PKRU: 55555554
>> [   75.917153] Call Trace:
>> [   75.919603]  <TASK>
>> [   75.921709]  intel_power_domains_sanitize_state+0x88/0xb0 [i915]
>> [   75.927814]  intel_modeset_init_nogem+0x317/0xef0 [i915]
>> [   75.933205]  i915_driver_probe+0x5f6/0xdf0 [i915]
>> [   75.937976]  i915_pci_probe+0x51/0x1d0 [i915]
>>
>> We skip the initialization of PHY A, but later we try to find out what is the phy
>> for that power well and dereference dig_port, which is NULL.
>>
>> Failing the PHY calibration could be left as a warning or error, like it
>> was before commit b4eb76d82a0e ("drm/i915/dg2: Skip output init on PHY
>> calibration failure"). However that often fails for outputs not being
>> used, which would make the warning/error appear on systems that have no
>> visible issues. Anyway, there is still a need to fix those failures,
>> but that is left for later.
>>
>> Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
>
>Reviewed-by: Matt Roper <matthew.d.roper at intel.com>

The only CI failure is on ICL, that doesn't have snps phy. +Lakshmi


Applied to drm-intel-next. Thanks.


Lucas De Marchi